Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Similar Messages

Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Date difference is not showing the correct result for date interval

Hi Expert,
                I've created two formula variable one for PO date and another for GR date
while i am taking the date difference of GR and PO date for single PO date selection
it showing me correct result , but while i am taking the date interval for PO date it not
showing the correct result.
eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
      it showing the result 2 and 5.
But if i am taking date interval for PO date:
eg: 01.01.2010 - 31.01.2010
PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
it showing me 14, 21 and 29
Thanks and Regards
Lalit Kumar

Hi Expert,
                Through replacement path.
Thanks and Regards
Lalit Kumar

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

The percentage completed UI is not showing the correct data

Hi All,
I have received complaints from one of my larger customers that a very long form we have created is not showing the correct % completed at the bottom. They get to the penultimate page (the last page only have three text boxes on) and it state that only 41% of the form has been completed.
It looks to me like the UI is not updating as the questions are being completed. Rather it waits until you move to the next page.
This is what makes our form look rubbish - you are being told that you have only completed 41% of the form only to move on to the next page and bam, you only have three more boxes to complete.
Can somebody help me out here.
Thanks,
Bill

Hi Bill;
I can take a look at your form but you are right that only the pages are accounted for in the percentage and not the form fields so it can be far off from reality. If there is skip logic in a form that can make it vary more. It is likely that it is working "correctly" (considering how we calculate) in your form but if you send me the link to your form at [email protected] I can see if it is not.
Thanks,
Josh

My storage is not showing the correct space

Hi,
Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you > Mac OS X: About background maintenance tasks
Reindex Spotlight then check the storage > Spotlight: How to re-index folders or volumes

Bpel console is not showing the correct reply xml..

Hi,
i created a process with xsd:any i/p and xsd:any o/p. Inside the process i just assigning the(asign activity) input payload to output payload. In the console am reciving diffrent outputxml.it's removing deeplevel node as bellow.
case 1
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse> </BPELProcessBProcessResponse>
case 2
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<a></a>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<a></a>
</BPELProcessBProcessResponse>
case 3:
I/P :
<BPELProcessBProcessRequest xmlns="http://iflex.com/BPELProcessB">
<aaa><a></a><a><c></c></a></aaa>
</BPELProcessBProcessRequest>
O/P
<BPELProcessBProcessResponse>
<aaa>
<a></a>
<a>

</a>
</aaa>
</BPELProcessBProcessResponse>
am using BPEL 10.1.2.
it seems as bug.is this fixed.. any batch updates ??

please check this thread for above issue. This is not formated well becoz of the xml data input. i used & lt ; and & gt ; for posting xml.. in the forum.
Bpel console & this forum is not showing the proper xml..

Smart Playlists not showing the correct songs on iPhone 4

I created a "Smart Playlist" called "100 Newest" which takes the 100 newest songs added to my music list on iTunes. It displays perfectly on iTunes on my computer but when I sync my iPhone4 to my iTunes, it syncs the regular playlists I create to my phone just fine. But the "smart playlists" added to my iPhone show up with the correct title, but when I view the playlist on my iPhone, it shows all the songs in my Library under that playlist. It will NOT show the 100 Newest songs like it shows on my playlist when viewed in iTunes on my iMac. Grrrrrr! Does anyone know how to fix this annoying problem. It's one problem after another I'm dealing with in terms of these playlists to appear and play prooperly on iPhone ios 5.0.x.

What type of email?

My Airdrop Photos are not showing the correct date when I receive them from my Family.

When I recieve photos via Airdrop or Shared Photo Stream they are not in the correct order in my Camera roll. The Dates are off. What is happening here?

You don't need to delete photos from your camera roll to save on backup sizes, you can turn individual items on and off for back up in your iCloud back up settings.
Apple States that the last 3 back ups are accessible, which means the photos from your back up may not be removed immediately.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

DBCA does not show the remote nodes on a RAC 10.2.0.2 HP-ITANIUM

HI at all,
I have a problem and I hope someone can help me.
A collegue have installed CRS and the Oracle HOME for a RAC 10.2.0.2 on a HP-ITANIUM ( two nodes) .
Im'm using the dbca for creating a cluster database.
I can see the RAC option pages , but in the "select nodes page" I found only the local node and not the remote node.
Any suggestion is appreciated
thank you
Adriano
$ crs_stat
NAME=ora.itmicz50.LISTENER_ITMICZ50.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz50.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz50
NAME=ora.itmicz51.LISTENER_ITMICZ51.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
NAME=ora.itmicz51.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on itmicz51
and the olsnodes command :
$ olsnodes
itmicz50
itmicz51
Message was edited by:
user549224
null

HI Chandra,
thank you very much for your reply. I suppose the oraInventory is the same, however the contents of inventory.xml file is this:
<?xml version="1.0" standalone="yes" ?>


<INVENTORY>
<VERSION_INFO>
<SAVED_WITH>10.2.0.1.0</SAVED_WITH>
<MINIMUM_VER>2.1.0.6.0</MINIMUM_VER>
</VERSION_INFO>
<HOME_LIST>
<HOME NAME="OUIHome1" LOC="/work/app/oracle/product/CRS" TYPE="O" IDX="1" CRS="true">
<NODE_LIST>
<NODE NAME="itmicz50"/>
<NODE NAME="itmicz51"/>
</NODE_LIST>
</HOME>
<HOME NAME="OUIHome2" LOC="/work/app/oracle/product/RAC10g" TYPE="O" IDX="2">
<NODE_LIST>
<NODE NAME="itmicz50"/> <===== EVIDENCE
</NODE_LIST>
</HOME>
</HOME_LIST>
</INVENTORY>
I can see that within the node_list tag I have only one hostname It is correct?
thank you in advance
Adriano Capruzzi

Team Calendar: Business graphic not showing the correct language

Hello,
We are using the Team Calendar application for two different languages: Spanish and catalan.
When spanish locale ('ES') is set in the business graphic the weekly day short descriptions are correct shown in spanish "Lu", "Ma", "Mi",...
Althought when catalan locale ('CA') is set, the business graphic shows the days in english not in catalan "Mon", "Tue", "Wed"...
Did anyone has a similar problem?
Any idea on how to improve the business graphic to accept more locales?
Thanks,
Gabriel.

Hi,
the Catalan locale will be added to the forthcoming IGS 7.00 patch, see note 1105634.
If you use IGS 6.40 you have to install patch 20.
Regards, Kai

Sign in to icloud... but it is not showing the correct email. It works on my computer but not on the phone

Its is showing the wrong email... I can sign in on my computer but not the phone

Welcome to the Apple Community.
If it isn't showing up at all, it means that Find My Phone hasn't been activated.
If it's just the location that isn't showing up, it may well mean it isn't connected to a network at this time.

Report not showing the correct layout when executed in Portal

Hi All,
We have created 5 different queries in different units of measure for a query. We have included these in a web template, and based on the UOM choosen , the WAD will pickup the queries and provides the desired results.we have executed the report in Portal and created a bookmark for it...but if a different unit of measure, the layout is changing. Is there any way to create a bookmark which will not change by changing the Unit of measure means a different query.
Thanks,

Hello Eranki,
Take a quick check on SAP Note 1671767 - BEX Variable Screen not showing via portal
Probably you are having issues related to personalization of your queries or templates on your portal.
Check it, remove and test again.
I hope it helps.
Best regards,
Edward

Siri is not showing the correct owner name. When I ask Siri, "What is my phone number?" it shows me contact that is in my phone. Why Is this?

When I ask Siri "What is my phone number?" Siri shows the incorrect #. It gives me a contact in my phone, which obviously isn't me. Why is this and how can I fix it?

In your settings... you have the "My info" VCARD selection with someone else and not your info... just change that and yo'll get what you're expecting to hear when you ask Siri that...
Siri settings are under Settings > General > Siri

SCOM 2012 Installation does not show the SQL Server Instance for reporting services

I have an issue when I try to install SCOM 2012 with the Reporting Server feature, so in the step that I have to select a SQL Server Instance I cannot do that, because as you can see in the picture no one option appears.
In my scenario I have a DCSERVER, SQLSERVER2008 R2, SCCMSERVER 2012 and in other server I are trying to install SCOM 2012. I are trying to use the same SQLSERVER to SCOM 2012.
Should I do other procedure on SQL Server before to continue? I will apreciate someone could say me what I need to do to resolve this issue.
Regards,
Paul Mendoza.

Hi Paul
Can you confirm that SQL Reporting Services is installed on the server that you are doing the install.
For a lab environment where you have SCOM Management Server, Web Server on one server and SQL Server on another you need to:
- run setup on the SCOM Server and choose NOT to install reporting. The install here will create the OperationsManager database and OperationsManagerDW (reporting) database.
- run setup on the SQL Server where SQL Reporting Services is installed. Then choose to install reporting. You should then see the SQL Reporting Services instance on the above window which is blank in your screenshot.
Take note of the warning in that window - SCOM uses its own role based security within SQL Reporting Services and this can break other reporting. E.g. you can't install SCOM and SCSM reporting (SQL RS component) together.
Cheers
Graham
New SCOM 2012 Blog! - http://www.systemcentersolutions.com/blog/
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

Installer is not showing the correct Nodes in RAC

Similar Messages

Maybe you are looking for