Installer not allowing selection of hard drive

I am atempting to install final cut express hd and at the select a destination step. The hard drive is in the window but it is not allowing me to select it. Below the window there is a message "some volumes are unavailable until the installer has finished processing". I've now been waiting 20 minutes.
Thanks,
Richard

I'm having a similar problem, except on a G4...
Did you ever resolve the issue?

Similar Messages

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

How to create a pdf form allowing Reader user to insert picture - NOT from their local hard drive - but from photos I want them to choose from?

Is there a way to create a PDF form where a Reader user can insert an image - that's NOT on their local hard drive?
I have 4 photos available - the users of my form will choose one of them and insert it in the pdf form. The users will NOT have the photos saved on their local hard drives so ideally, they will see thumbnails or a preview of the available photos and then select and insert the photo they want to use.
Is this possible? If so, how do I go about this? Right now, all I can find are ways to insert a photo located on the users local hard drive.
Hopefully someone can answer my question.

George, I'm not sure where the photos would go or how to include them. I'm a complete newbie when it comes to making pdf forms so i'm not sure if it's even possible.
I'm planning to make a flier. I want the end user to be able to choose the photo displayed on the flier - the photos would be ones that I choose and supply. I know I could just make four different fliers, but I thought it would be more efficient if I had one flier and gave the Reader user the ability to select the photo they like.
Does this sound possible to you?

Laptop will NOT Shutdown after a hard drive installation

We have been rebuilding a Pismo from scratch basically. The last part was the hard drive which we did yesterday. It too awhile to get the computer to boot up but when it did it worked perfectly - or so we thought. After replacing all the contents of a broken iBook (cloned backup), we used it for a while and things worked fine. Unfortunately, it will not shutdown. Using shutdown ... it closes all the files and then just sits there with the desktop open. Tried several things and it just won't shut off. Any ideas?

Hi, and welcome to Apple Discussions.
Are you talking about the Pismo not shutting down? Or an iBook?
Have you tried forcing a shutdown by holding down the power button for 5-10 seconds? This is how to force an iBook to shut down.
Every time you have to do a forced shutdown instead of a normal one, there is a chance of hard drive damage and you should repair the hard drive, either by booting into Safe Mode OR by starting up from the Mac OS X Install disc by inserting the disc and restarting your computer, holding down the C key as the startup chime is ending. Then click 'Next' at the language screen and choose Utilities > Disk Utility and select the hard drive in the left column. Choose the First Aid tab. Click Repair Disk to test and repair the hard drive.
Once you have repaired the hard drive with either Safe Mode or the Install disc's Disk Utility, then start up normally and repair permissions from Disk Utility in the Utilities folder on the hard drive.
If it continues to have problems shutting down, you may want to try resetting the PMU.
Good luck.

Software Installation CD, won't recognize hard drive not labeled C:\

My hard drive is labeled I:\. The installation cd does not recognized this and will not install the software. How can I get the installation program to recognize the hard drive?
Post relates to: Palm TX
This question was solved.
View Solution.

Please see this thread.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Macbook Pro will not recognize my external hard drive

I just updated to a newer MacBook Pro. I ran Time Machine on my old Macbook from a 2TB external USB hard drive. When I hooked the hard drive to my new Mac, it wouldn't allow me to select it as the drive for Time Machine. So I dismounted the hard drive and hooked it back to my old macbook to see if it still registered there (which it did). Now when I try and hook the hard drive to my new macbook, it will not recognize it at all. First question, why will it not recognize my new macbook, and second question, why does Time Machine not recognize the hard drive? It has my old time machine files on it...hopefully I don't have to reformat it and lose all my backup??

My hard drive is now connected. But Time Machine will not let me select the hard drive as my back up drive. This hard drive was used on another Macbook, so Time Machine doesn't seem to recognize the hard drive on the new one. Do I need to reformat the hard drive? I hate to do that because I have the previous backups on there.

Tiger randomly stopped allowing my External Hard drive to mount and...

Hello, I have been using an External Hard Drive (1 terabyte Seagate, new) for a couple months if not a year by now for saving movies, and all of my iTunes on it. Its been working wonderfully. However it recently stopped being able to mount citing invalid hard drive and gives me the options of either eject, ignore, or initialize. Im not sure what to do. And also my computer has been acting funny every since the day it started. I will walk you through it step by step.
July 6th I was surfing the web and unfortunetly clicked on a link that aparently contained a trojan. Or atleast thats what my Antivirus notified me of. I had downloaded the trojan some how without a pop up or anything telling me I was downloading anything. (using safari) So i ran a virus scan and saw one virus was in my system and that it couldnt be deleted or repaired by my antivirus program, Im working on getting rid of that but at the time I had my Seagate 1 terabyte external hard drive attached via fire wire to my Macbook. It was working then.
Later that day I unplugged my hard drive and took my laptop around a little bit, nothing unusual. Then when i came back later that night I tried plugging in my hard drive and a pop up stated that the hard drive was unable to mount and I could either eject, ignore, or initilize. I tried may different routes, restarting, letting it all rest, etc. And in Disk Utility i try to verify the disc and it says its unable to and needs repairs. So I try repairing the disc and it says unable to due to an error.
Then yesterday I went to my applications and noticed none of my applications are there anymore. These applications were saved on the internal hard drive so it was very odd to me. However i can still use spotlight to find and open my apps.
My question is, What can I do to allow my external hard drive to mount? I dont figure it is the trojan on my system but could it be? If so how would I fix it? Im mostly worried about getting the data off the external hard drive then I can reformat it. Or if theres a way to just get it back to normal without reformatting Id love to hear it. As for the applications missing and the trojan on my internal hard drive I can fix that, at the very least Ill just reboot my system with my original OS Disc and just start fresh, its about time anyways.
But please. If anyone has ever had their external hard drive just stop mounting and figured out what to do I would be ever so grateful to hear how you did so. The hard drive itself isnt damaged, its not making any unusual sounds. Whenever i plug it into the computer it acts like normal (turning on and what not) until the computer tells me it cannot mount then nothing happens. Ive looked online and it seems to be a software issue.
If its any help I was downloading a torrent (.avi, no viruses) at the time. I know sometimes if one file on the hard drive becomes corrupt the whole thing becomes unusable. Regardless I would appreciate it if anyone knows a way to at the very least retreive the files on the drive, but preferably know how to just get it back to normal. If i could get it to force mount (via terminal or something) I know which file would possibly be the corrupt one or something so I could work with it.

Bejan:
Thanks for posting back with the pics of the messages from your computer. Disk Utility reports "Underlying task reported failure" when repairing a volume is a directory error which cannot be repaired by Disk Utility. Unfortunately, Disk Warrior may not be able to replace the rebuilt directory, either. Tech Tool Pro has a better chance of repairing it, although this particular directory issue can be stubborn, and is often rooted in a hardware issue. Your surest bet is to backup/clone the information on the HDD using a utility like SuperDuper or Carbon Copy Cloner, completely reformat and erase the HDD (directions below), then restore data from backup.
Formatting, Partitioning Erasing an External HDD
• Connect external HDD to computer
• Turn on external HDD
• Start up computer and log in
• Go to Applications > Utilities > Disk Utility and launch DU.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel.
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
For more partitions than one, after you have selected the number of partitions adjust the size of the partition by selecting the top partition and typing in the size; then move down if more adjustments need to be made.
(See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Repeat above procedure to erase each partition
• Quit Disk Utility.
cornelius

Time machine would back up only the first time after I shut off my imac and started it up again. Then it would fail or claim it could not locate my external Hard Drive even though it's icon was showing in the time machine dialog window.

Time machine only ever backed up the first time it runs immediately after I start up my computer after it has been shut off. All other back up attemps fail. Recently it stopped recognizing the icon for my external hard drive in the time machine dialog window where you select the hard drive to back up to, and turn on and off the time machine function. Now the external HD icon only shows up on the desk top but no longer in the dialog box. I just tried shutting the computer off and turning it on again and now the light is on, on the external hard drive but the icon does not even appear on the desk top.
The external hard drive is a 1TB Seagate. The drive still has plenty of unused capacity. I ran a diagnostic test on it. It said the disk needed repair but the repair function would not work. The message stated that it could not be unmounted and repair is not available because the disk can't be written to. The Mac OX utility said the disk can still be opened but can't be changed nor repaired. The external HD is not S.M.A.R.T. supported.
I haven't tried replacing the cable yet. Is that the next thing I should try?

What Mac OSX version are your running ("iOS" as shown in your profile cannot run on a Mac computer)?

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Switched on my imac 24inch intel based and all I get on screen is a folder with question mark flashing,I had backup on external hard drive but when I try to reinstall it can not find my mac hard drive

Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)

Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

Just format it with Disk Utility as mentioned above. Select the new disk on the list at the left. Click the erase tab. Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice. Then click the erase button.
That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase. You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition. Give each a name as before and again Mac OS Extended (Journaled). Click Apply button to create the partitions.
Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them. So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose. You can always go back and erase it back to a single partition.

How to copy catalog from external hard drive to computer hard drive to use smart previews when not connected to external hard drive?

I am very new to LR5. I have LR5 set up so that my catalog and photos are on an external hard drive. I found out that when not connected to the hard drive, LR5 cannot find my catalog, therefore, I cannot do any editing in smart previews unless connected to the external hard drive. How can I fix this issue so that I can edit photos without being connected to the external hard drive. Is there a way of copying the catalog off the hard drive on the computer hard drive or do I need to reestablish a new catalog using LR5? Does the catalog always need to be loaded on the hard drive? Thank you in advance.

Yes that is correct. The LR catalog must be on the computers internal drive. Then when you have Smart Previews enabled you can edit image without having the drive they are on connected. Then when you connect that drive the images will be updated.
Just COPY those 4 folders over to your internal drive to a folder called Lightroom Catalog that you create. Then Open LR and go to the File menu item and select Open Catalog. Browse to the folder you created called Lightroom Catalog and select the Lightroom 5 Catalog.lrcat file and click Open. Once Lightroom restarts open the preferences, Edit>Preferences, and on the General Tab in the Default Catalog section make sure "When starting up use this catalog:" area lists where you have copied those folders. Something like Macintosh HD/Wherever you created that folder/That folder name/Lightroom 5 catalog.lrcat.

My MacBook Pro can not find my internal hard drive.

My computer does come on. And I have a MacBook Air 2009. Just some history, my computer froze on me one day. So I restart it and a screen with a folder and question mark showed up. So I called apple and got some trouble shooting done. Nothing worked. So they ended up sending me another installer disk. And that did not work. Could not find my internal hard drive. So I took it to a apple store and the guy who looked at it told me that it was water damaged and would cost $700 to fix. So I pushed it to the side for year and decided to take a further look into it recently. And found some information where people had the same issue and was advices their hard drive could be dead. So I'm thinking about getting a 2nd opinion and taking it some where else. I'm just wondering could I really just replace my hard drive and be fine with my computer? If its really water damaged wouldn't it not work? Does replacing the hard drive cost a lot to do?

Its extremely unlikely your HD is water damaged, everything on your internals in your macbook Pro would FRY long before water seeped its way into your HD,....the HD circuitry on the outside of the HD however is another story.
If your computer IS in fact water damaged, then yes, replacing the hard drive wouldnt fix anything.
Replacing the HD yourself , IF your HD is dead and at fault, can be done by yourself easily and cost around $65.
In any regard, on a 2009 computer....., 700$ could buy you a nice MUCH NEWER and faster like new refurbished MAC,........as such it would be best not to consider such an option.

Could not deactivate before formatting hard drive

Hi, my hard drive failed and I couldn't uninstall and deactivate my Acrobat, so now I'm afraid I'll lose my license. Can anyone tell me what should I do?

Thank you so much!
2014/1/5 Bill@VT <[email protected]>
Re: Could not deactivate before formatting hard drive created by
Bill@VT <http://forums.adobe.com/people/Bill%40VT> in *Acrobat
Installation & Update Issues* - View the full discussion<http://forums.adobe.com/message/5983178#5983178

How do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

how do I save my itunes libabry on my computer and not on an exteernal hard drive, how do I save my itunes libabry on my computer and not on an exteernal hard drive

It is on the internal boot drive by default.
How/why did you change it?
It is on the internal boot drive by default.
How/why did you change it?

Installer not allowing selection of hard drive

Similar Messages

Maybe you are looking for