Installer of Desktop and Administrator 11g for x64

Anybody knows if there are any plans to release an x64 installer for Discoverer Desktop and Discoverer Administrator(11g).
Edited by: user5629916 on 30-jun-2010 9:40

Hi
I have done some more investigation on your behalf and would like to point you to Oracle Support note *233047.1*. Here's the link to the website: https://support.oracle.com/CSP/ui/flash.html
In there are several useful questions and answers about Discoverer. The one that will be of interest in your situation is this one:
Q: Are Discoverer 11g Administrator and Desktop certified to install on 64-bit Windows clients?
A: No, at the time of this posting, the certification spreadsheet specifically only lists 32-bit Windows clients (XP, Vista, 7). At this time certification with Windows 64-bit client operating systems is being evaluated for a future patch set, post patchset 3. This document will be updated when the certification is announced.
If you try to install on Windows 64-bit operating systems, you will receive a warning like this when you run setup.exe from the /Disk1 directory.
You may workaround this by installing from ..\Disk1\install\win32 and running setup.exe from there; however, as stated at this point it is specifically not certified on 64bit Windows client operating systems; therefore, we cannot accept Service Requests for functional issues.
By the way, I did have one of my clients only yesterday successfully install Desktop and Administrator 11g onto Windows 7 64 bit. Here is one of their comments: I am running on Windows 7 64 bit. The 11.1.1.3.0 has both 32 bit and 64 bit available. It seems if you are running on 32 bit you would choose XP mode and the 64 bit by default compatible with Vista
Best wishes
Michael

Similar Messages

Discoverer Desktop and Administrator: which is the next step?

Hello everybody, i would like to ask you some help about understanding the following issue:
I noticed that Discoverer Desktop and administrator are being treated like obsolete.
Do they have a direct successor? I mean, is there any new product that has more or less the same functionality and the same philosophy?
I'm looking at the Business intelligence suite but it seems to be a bit much wide for my scope.
Thank you all in advance.

So, in a way you are saying that discoverer is still better than any other oracle products including discoverer plus. I mean, discoverer adm and desktop are useful for me since
they are standalone application and the understructure is quite light ( for example you don't need any application server behind like plus does but just an EUL).
And i'm agree with your parallel matching with sqlplus situation. I still prefer doing something with sqlplus since is more reliable and quick than sqldeveloper. But i cannot say that
discoverer desktop is the most reliable tool for reporting. In 6 months i used i found out many bugs and many strange behaviors that made me a bit crazy about this tool. I also tried discoverer plus but i found it extremely slow and unreliable. The level of productivity is something ugly, not just slow. So far indeed desktop seems to be the fastest and most reliable solution for a "quick" reporting development.
I would like to ask you another question: has the new hyperion platform some reporting tool like discoverer?
I mean if discoverer is the reporting tool for Relational OLAP what about the reporting for Multidimensional OLAP?
Thanks again.
Best regards

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

Brooks lansing if you create a new Administrator account does the same issue occur? If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
Have you removed and reinstalled Photoshop Elements 11? This may reset the file permissions to the correct state to allow it to work under new accounts.

Problems with BBC iPlayer Desktop and Adobe Air for Mac

I would be grateful for anyone who can help me with a problem I have on my Laptop running Mac OS X Lion 10.7.3.I am having difficulty running BBC iPlayer Desktop and I suspect it is caused by Adobe Air.
Recently I was prompted to update Adobe Air to the latest version (as of February 2012) and after I successfully updated the program, this began to cause problems when I used BBC iPlayer desktop.
The first problem I noticed was that I was unable to play any downloaded programmes in full screen - only the sound played, not the video.
Secondly, a few weeks after this problem began, all my TV programmes mysteriously disappeared.
My final problem is that everytime I launch BBC iPlayer it is unable to download new programmes - when I am connected to the internet, the application still says it is "offline".
I have tried to resolve the problem by restarting my computer, uninstalling and reinstalling BBC iPlayer, disabling and re-enabling my firewall, connecting to the internet in different locations but this has not resolved the problem.
I tried to uninstall Adobe Air, but the installation package tells me it is 'corrupt'. So I tried to download and reinstall the application from the adobe website, but the computer already recognises that the app is installed. i.e. - I can't uninstall or reinstall Adobe Air.
I contacted BBC iPlayer support and they were unable to help - directing me to your website. I have read several other discussion topics posted on this website but not found the solution I am looking for.
Please can some help me to solve this problem, by helping me uninstall and reinstall Adobe Air for Mac?
I am not very technical minded - for example - I don't know what log files are or how to find them - so please explain it as simply as possible.
Thank you in advance for your help!
Ryan

Just had the same thing happen AGAIN. Suddenly - a blank iPlayer Desktop which failed to download new programmes. All previous programmes were still in the repository folder. This time the sequence I outlined previously didn't work.
What eventually got things working this time was to reinstall Adobe Air as part of the BBC iPlayer Desktop installation process - and not separately.
So:
a) Move iPlayer to trash.
b) Find and delete the following folder: Users/Yourname/Library/Preferences/BBCiPlayerDesktop.61DB7A798358575D6A969CCD73DDBBD 723A6DA9D.1
c) Find and delete the following folder:
Users/Yourname/Library/Application Support/Adobe/AIR/ELS/BBCiPlayerDesktop.61DB7A798358575D6A969CCD73DDB BD723A6DA9D.1
d) Find and delete the following folder:
Users/Yourname/Movies/BBC iPlayer/repository/cache
e) Find and run: Applications/Utilities/Adobe AIR Uninstaller
f) Empty the Trash. I found that bits and pieces of BBC iPlayer were still running despite having been quit and dumped in the trash - and so it wouldn't allow me to complete this part. Restarted the computer, then empty the trash.
g) Find the folder: Users/Yourname/Movies/BBC iPlayer/repository and rename it repository2
h) Reinstall iPlayer. It will tell you that you have no programmes to view. Quit the programme.
i) Find and delete the folder: Users/Yourname/Movies/BBC iPlayer/repository
j) Find the folder: Users/Yourname/Movies/BBC iPlayer/repository2 and rename it to repository.
k) Relaunch iPlayer
It would be terribly nice if the BBC or Adobe stopped buggering about with this . . .

SAP NetWeaver 7.01 Java installation on MSCS and Log shipping for DR

Hi Experts,
Can anyone please explain if below is possible :
- We have installed Netweaver 7.01 Java application server on Microsoft clustering which is working perfectly ok.
-Now we are looking at building a DR solution for the above installation using SQL Server 2008 Log-shipping. The DR site has the same MSCS configuration as the primary site.
-If we log-ship the production database and create a secondary database in "standby" or "norecovery" mode, how do we install a Passive SAP Central instance in case we want to failover from the primary to secondar ?
- We know that we have the primary database log-shipped to the secondary site and in the event of failure we can switch the roles and make secondary as primary and then perform the system copy steps on the MSCS. the drawback here is that it will take a long time to bring the system online if we perform the system copy. Our RTO is one hour only so this is not acceptable.
Question : Is there anyway we can install the Central Services and Applicaiton servers beforehand on the secondary site on the secondary log-shipped database so that in the event of failure all we do is bring the secondary database primary and then start the SAP on the secondary site ?
If yes then can anyone point me the any SAP note or documentation that has the details of how to do this.
I have already looked at 1101017, 965908 but its not clear how we can perform the installation on the JAVA stack only.
We want to implement similar to what is shows in the below diagram :
http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm
Appreciate if someone can assist in resolving the above query.
Thank you.
RA

Thanks Markus for your reply.
I did looked at the HA web page from SAP and configured MSCS for HA but there's no information regarding DR setup. All it says is setup a log shiping which we already know but there's no procedure to setup SAP on the DR site(Passive SAP central instance)
My original question still stands :
- Is system copy the only option that we need to perform at the DR site in the event of failure ( Assumption is that we ieve make the secondary database as primary and also sync file system for JAVA using SAN replication technologies)
- We have to achieve an RTO of 1 hour which is not possible in this case as performing system copy using MSCS HA option will take few hours to setup and test.
-The link "http://help.sap.com/saphelp_apo/helpdata/en/fc/33c028d58511d386ee00a0c930df15/content.htm" shows that we can have SAP PAssive central instance. Whats the procedure of installing this Passive instance on the secondary site so in the event of failure all we do is make the secondary database primary and bring the SAP system online(installed already - no system copy performed) and also file system is already is sync.
Thank you.
RA

Sequence of Installs of RTA and SCA files for GRC AC 5.3

Hello,
I would like to confirm the correct sequence of applying RTA and SCA files for GRC AC 5.3.
On ABAP Stack
1- Install VirsaNH RTA on ECC 6.0 System with SAINT
2- Install VirsaHR RTA on ECC 6.0 system which has SAP_HR
3- Install both VirsaNH RTA and VIRSAHR RTA on a system which is SAP HR
4- Install VIRSANH RTA on BI System. (There is no need of VirsaHR on BI system)
5- Install all Support Packages up to 10 or 11 for VIRSANH & VIRSAHR with SPAM
Next
On JAVA Stack
6- Install
VIRCC00_0.sca
VIRAE00_0.sca
VIRRE00_0.sca
VIRFF00_0.sca
7- Install VIRACLP00_0.sca
8- Then install VIRACCNTNT.SAR
9- Next install EP RTA VIREPRTA00_0.sca
10- Install all Java patches for the above components
Based on the above,
a- Plz confirm if the above sequence is right.
b- My question is can I install 6, 7,8, 9 with JSPM at once as one step?
c- Also can I install SCA files with JSPM first and then install RTA files on ABAP stack later?
d- Also we have BI system with ABAP & JAVA Stacks. Is VIRSANH sufficient for both ABAP & JAVA, or do we need an additonal RTA for BI JAVA ?
Thanks for your valuable inputs in advance.
Regards,
Haleem

Hi,
> 1- What is the UME of your BI Java stack ?
>
> Answer: We have installed BI JAVA, EP, EP Core, so we use SSO with EP and BI ABAP. So the portal is UME for BI Java stack.
>
Check below link which will answer your queries:
Java RTA for GRC 5.3
> 2- Check SAP Note 1174625 - Access Control 5.3 Java Support Pack Installation
>
> I checked the note 1174625, which says the following
>
> All of the sap.com/grc files have to be undeployed except the db and dictionary files for each component. The files that are NOT to be undeployed are:
>
> - sap.com/grc/ccxsysdb
> - sap.com/grc/aedict
> - sap.com/grc/redictionary
> - sap.com/grc/ffdb
>
> Since this is a GRC AC 5.3 install on a fresh Netweaver 7.0 EHP1 Java stack install, do I need to undeploy all the above components, before doing AC 5.3 install, as mentioned in the note.
>
This is used when you do upgrade your old GRC release to latest one. So if you are doing fresh install then you need not to do these steps.
> 3- Also this note 1174625 answers to most of my questions, but does not mention anything about VIRACCNTNT.SAR. Is >this SAR file installed on JAVA Stack or ABAP stack? Is there a OSS note on VIRACCNTNT.SAR?
>
This file contains Roles, Rules, functions for RAR, CUP, ERM etc. in txt files which you need to upload when you will do the configuration of GRC.
Thanks
Sunny

Desktop and documents question for Lion

is there a way to set certain word documents to open on a designated desktop without them appearing on other designated desktops.
for instance:
I have 2 desktops: One for play and one for work
I would like to assign certain word documents to my work desktop but
not have them appear on my play desktop.
Thanks So Much

i did assign it to open on my work desktop
but when i toggle back to my play desktop
word is open on my play desktop also because there is a little light on underneath the word icon on both desktops
I only want the app to be active on my work desktop
so my question was is there a configuration to achieve this...?

Flash Player / Your installer is broken and has been for some time

Regarding the Flash Player Installer on Mac OSx: I've uninstalled the old version, and verified that it is uninstalled. I've updated all software on my computer and then installed the latest version of Shockwave. I've rebooted and shut down all other programs. Still, the installer is stuck at 25% download. Repeatedly. Based on searches, this has been a problem with your installer for about a year. It's beyond imagination that your dev team hasn't fixed this. A fix should have been out in a day.

The instructions here worked: Installation problems | Flash Player | Mac

Oracle Discoverer Administrator 11g

Hi All,
I want connect Oracle Discoverer Administartor 11g, so please hel[ me where can I download Oracle Discoverer Administrator 11g for Windows version.
i am able to find oracle doscoverer administrato 10 but not able find 11g software.
Please suggest.
Regards,
Prasad

Hi,
Did you check this http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
Look for Oracle BI Discoverer Desktop and Discoverer Administrator 11.1.1.3.0
http://download.oracle.com/otn/nt/middleware/11g/ofm_disco_desktop_win_11.1.1.3.0_disk1_1of1.zip
Thanks,
Sutirtha

Does the Desktop and Mobile Upload ftp to your Website at the Same Time?

When I finish my Desktop and Mobile design for a website, does it upload at the same time, or do I have upload individually?

Brad, Thanks for your reply. ADubin

Can't find Ethernet driver for x64 XP Pro

Hi Everyone,
I recently install x64 XP Pro to T61 machine and search for Ethernet driver in the Lenovo's website.
I can't find it. My T61 got Duo Core 2 2.4GHz, 2Gb of Ram. NVIDIA Quadro NVS140M 512MB.
I thank you in advanced and look forward to your response.
Hoang

Don,
Thank you very much for the link to Intel internet driver. Now, I am looking for audio, sound and graphic drivers for x64 XP Pro OS. I had tried drivers in Lenovo website and it didn't work. All x64 drivers are made for Vista. Also, I tried Nvidia website and they didn't have required graphic driver. My T61 system hardware is Intel 2.4 GHz Duo Core 2, Nvidia Quadro NVS 140M 512MB, 2GB RAM memory. I look forward to your response and you have nice day.
Cheers,
Hoang

New installation woes - SQLDeveloper on Oracle Linux x64 and Oracle 11g XE

Note that as an experienced Oracle developer in enterprise environments running MS Windows OS, I am familiar with SQLDeveloper for Windows. I don't have a lot of experience with Linux however. I don't find it intimidating, I just don't have a lot of accumulated knowledge.
I have recently been trying to set up a development environment on my Windows7 Professional x64 laptop.
1. Installed Oracle VBox
2. Installed Oracle Linux 5.2 inside the VBox (because Oracle 11g XE is not certified on 64 bit Windows, needed to go with a Linux OS)
3. Installed Oracle DB 11.2 XE
4. Installed JDK as instructed in the SQLDeveloper release notes for Linux x64
5. Installed SQLDeveloper 3.1.07.42-1
No apparent issues with any of the installations.
Problem : I can run SQL Plus from the command line, but when I click on the icon for SQLDeveloper, nothing happens. No error messages, nothing else.
Question #1 : Unsure how to debug/troubleshoot this. Will read through the installation and release notes for SQLDeveloper, but any suggestions would be welcome.
Question #2 : Could this be due to an issue with the JDK installation? It appeared to be successful (no obvious issues) but I can't see anything in the Oracle Linux menu system that tells me the JDK was installed successfully. How can I confirm that the JDK installation was successful?
Edited by: Peter Hartgerink on Jun 19, 2012 9:12 AM

>
The Linux x64 version of SQLDeveloper doesn't come bundled with JDK. There is a version of JDK recommended, with an advisory to install it before installing SQLDeveloper. This I did, with apparent success. I guess I'll have to install the JDK again and check my Java versions afterwards. Thanks.
>
I don't know what JDK you downloaded since you didn't say. What version was it? Post the link.
I find it hard to believe that the JDK version recommended was 1.4.2 since that is an ANCIENT version of Java, you have to hunt to even find it for download and most importantly the sql developer main download page clearly announces what version of Java is needed.
http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
>
JDK Support
Oracle SQL Developer 3.1 is shipped with JDK1.6.0_11. However, you can connect to and use any JDK 1.6.0_11 or above. To use an existing JDK, download the zip files listed below "with JDK already installed."
>
As you can see you need JDK 1.6.0_11 or above.
If the version you say was recommended was actually 1.4.2 then that is an error; post the details so the developers can get that error fixed.
I don't know what is on your system and can only go by the information you provide
>
4. Installed JDK as instructed in the SQLDeveloper release notes for Linux x64
java version "1.4.2"
>
You either downloaded version 1.4.2, which seems unlikely, or your Linux included 1.4.2 and it is being used when you try to launch sql developer.
Perhaps your system now has multiple versions of Java on it but the version being used by sql developer is the wrong one. If so that is the issue you need to resolve.

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

I ran the Adobe installer for CC desktop and it failed. Error: 50 What happened? Now the Run.exe file is gone.

I ran the Adobe installer for CC desktop and it failed. Error: 50 What happened? Now the Run.exe file is gone.

Hi,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

System setup/installation to use Forms and Reports 11g

We are a high education organization. We recently get a request from faculty to create an Oracle environment for academic purpose. We have Oracle database 11g installed on a Windows 2008 R2 64bit server. Faculty require to use Froms and Reports 11g. My questions is what will be the basic minimum set up to make that happen? Can we also install the WLS with Forms and Reports on the same server that the database is on, then only install Forms and Reports client part on user workstations? Can somebody provide any documentation that can help on this issue? Thanks.

Michael Ferrante's post in this thread has a list of useful documents
How to run Oracle Forms app on local PC?
For your server configuration you should be looking for the Windows 64 bit version of Weblogic Server and Forms.
> My questions is what will be the basic minimum set up to make that happen?
The system requirement guide in the link above will have all the information you need
> Can we also install the WLS with Forms and Reports on the same server that the database is on
Yes, assuming your server meets the combined requirements for both products, although I prefer to keep them separated for ease of administration.
> ..then only install Forms and Reports client part on user workstations?
For Forms 11g there is no installation required on the client to run forms applications (other than JRE). However if the user workstations will be used to run the forms builder and reports builder used to create the forms and reports modules, you will need to install Weblogic and Forms (Developer install type) on each workstation.
One note of caution: Forms 11g is extremely sensitive to the versions of the components - Weblogic Server, Forms, Java, Internet Explorer, etc. I would use only the versions certified in the certification matrix in the link above.

Installer of Desktop and Administrator 11g for x64

Similar Messages

Maybe you are looking for