Installer project error 1309
Hello guys,
I hope I'm on the right forum.
I have used VC++ to create an app. Then I used the installshield limited edition template to create an .exe and .msi installer setup file. BUT when I try to launch the .msi to check if it works and install my app, the error :
Error 1309. Error Reading from file :
C:\path\myfilename.dll Verify that the file exits and that you can access it.
pops up saying that I should verify if I have access to the folder etc... And the folder is the one containing the .dll files I added to be packaged within my setup (or msi file).
One thing to be noted is that when I try , from inside VS solution explorer setup project to install (right click on the setup project -> install) it works fine. What's going on ?
Could anyone help me here ? (or redirect me to the proper forum ?)
Thank you!
Hi monitor,
This forum is discussing about ClickOnce and Windows instaler, your issue is more related about the installshield limited edition which is a thrid party product. I will recommend you go to the link below for help.
Reference: https://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
In addition, I made a research about this error, and the link below might be useful to you:
# Installshield error 1309.Error reading from file
http://stackoverflow.com/questions/3813989/installshield-error-1309-error-reading-from-file
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Similar Messages
-
Problem after installation Project Server 2013 CU September 9, 2014
Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful. -
Installer Build Error using LV Runtime Engine 2010
I had an executable and installer working that were built in LV2009. Since then I modified my source code and saved as LV version 2010. I rebuilt the executable, but when I tried to run it on the target computer, I got an error message saying that LV Runtime Engine 2010 was needed. So I tried to rebuild the installer using LV Runtime Engine 2010 as an Additional Installer. However, this build was unseccessful and I got a lenghty error msg that I don't understand (see attached).
Thanks in advance.
Solved!
Go to Solution.
Attachments:
Installer Build Error Message.docx 13 KBHello,
I am building an installer with LV2010 SP1. I have added the runtime engine to be included in the installer. I get the following error
------------------ERROR MESSAGE-----------------------------------
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> AB_UI_FRAMEWORK.vi >> AB_UI_Frmwk_Installer.lvclass:Build.vi >> Installer.lvclass:Build_from_Wizard.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'PSUTS' from: C:\CBESVN\PSUTS\Software\builds\PSUTS Installer\Volume\ to: C:\ProgramData\National Instruments\MDF\ProductCache\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the path specified.
*** Error Details:
Error in MDF API function: _MDFDistCopyList_CopyItem
Windows function FindFirstFile returned an error. Error code: 3
*** End Error Report
Done building deployment
CDK_Item_OnDoProperties.vi.ProxyCaller >> CDK_Item_OnDoProperties.vi >> AB_UI_FRAMEWORK.vi >> AB_UI_Frmwk_Installer.lvclass:Build.vi >> Installer.lvclass:Build_from_Wizard.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_Build.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment informationAdding files to installerDone adding filesPreparing to build deploymentCopying products from distributionsCopying distribution 'PSUTS' from: C:\CBESVN\PSUTS\Software\builds\PSUTS Installer\Volume\ to: C:\ProgramData\National Instruments\MDF\ProductCache\ ***************** Error: Windows SDK function returned an error. (Error code -12)The system cannot find the path specified.
***************** Error Details:Error in MDF API function: _MDFDistCopyList_CopyItemWindows function FindFirstFile returned an error. Error code: 3*** End Error Report************** Done building deployment
--------------------MESSAGE END------------------
In the additional installer page: I see the installer source location (see attached image file) as 'C:\CBESVN\PSUTS\Software\builds\PSUTS Installer\Volume' which is really my installer's source location. But I am not sure how this location got assigned. I have tried to create new build spec from the same project, still the installer source location stays the same. How do I get this issue solved?
Attachments:
Additional.jpg 174 KB -
Error #-1309, Multiplexor Error
I am trying to create a wedding reception DVD in iDVD. I make home videos like this in iDVD all the time and I never have any issues. I edit the wedding in Final Cut and then export it to QuickTime. Next I create the menu in iDVD and add the QuickTime file. Then I save it as a disc image. Usually, it takes about an hour or two and then it says Disc Image Created Successfully. Instead, it is taking about 5 hours and then when it gets to the very end, it says:
"Burning Finished - Errors were found during the burning process - The error #-1309 was reported"
and then I click okay and it says:
"Multiplexor Error - There was a problem during multiplexing/burning"
What does this mean? How do I fix it. I tried calling technical support and they were useless. Like I said, I have done this numerous times before and it usually works every time. The video is an an hour and 10 minutes and I know that anything over an hour has a harder time rendering, but usually I just change the settings to Best Quality and it works fine. Not this time. I tried deleting everything, even the Quick Time file and starting over, but it happens eveytime.
Any help would be much appreciated!!! Thanks!Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
(Thanks to Len Goff for the copy & Paste!)
Sue -
Hello all. I am new to Mac so any and all help is greatly appreciated.
I am currently attempting to transfer files from iMovie and iDVD to an external hard drive. I formatted the drive for Mac already. My problem is that whenever I try to transfer, it says "operation cannot be completed because of Error 1309."
Can anyone offer an help on how to solve this problem?
Thanks!Welcome to the Apple discussions.
That error code typically means the file you're trying to copy is too big for where you want to copy it to. Did you format the external hard drive in mac OS extended format? If not, is it formatted so it can also be used by Windows? There's a 4GB file size limit in that case, and an iMovie project can exceed that. -
Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?
thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again. -
I have a workflow being deployed for the first time on a farm. When I create a project with an EPT connected to the workflow it runs and can enter the required field in a PDP. Then I Submit the workflow to go to the next stage and I get the "Unable
to open project, no valid Project Detail Page could be found for the project" error. After that the project is stuck on the same error. All of the 18 stages have PDP and Schedules assigned to them.
Any ideas on why the workflow cannot see the PDPs? Is there a farm permissions that I am missing? Thanks!Hi David,
It starts to be a bit technical for me, but here is what I found on the web (seems to be an authentication issue with Sharepoint 2010):
http://social.technet.microsoft.com/Forums/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the
http://social.msdn.microsoft.com/Forums/silverlight/en-US/5cc70ff6-50d9-4cd3-b092-12007f4e495b/response-message-contenttypebindingtype-mismatch
http://stackoverflow.com/questions/5263150/the-content-type-text-html-charset-utf-8-of-the-response-message-does-not-match
Hope it will help you going forward in resolving your issue.
Guillaume Rouyre - MBA, MCP, MCTS -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
Installer Encountered Errors - PLEASE HELP
Hi,
Getting very annoyed - sat at the computer for almost 2 hours.
Have windows Vista and finally it has allowed me access to install iTunes. When I go through the stages to install I get the following message:
+The installer encountered errors before iTunes could be configured. To retry these operations at a later time, please run the installer again.+
I have tried so many times. Windows is up to date and I have looked at the troubleshooting pages and am getting nowhere. I want to play with my new toy and can't. Can anyone help me get this thing installed successfully.
Thank you!See if you can get itunes to install from another Windows user account. That will tell you if the problem is system-wide or user-related.
Then try other steps listed in this article:
http://support.apple.com/kb/HT1926 -
Everytime I try to install the new itunes it come up with the following message: ' The installer encountered errors before itunes could be configured, Errors occured during installation, your system has not been modified. Please run installer again or click exit' I've tried to install it multiple times now and get the same message everytime. I've also tried re installing itunes 10, but when I go to open it it comes up with the message 'The files itunes libray.itl cannot be read because it was created by a newer version of itunes'. Please help.
Hey sjl95,
Thanks for the question. I recommend that you refer to this article if you are running into issues re-installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
ITunes 7.3 installer "encountered errors before iTunes could be configured"
I was able to originally install itunes 7.3.1.3 (upgraded from 7.2) and use it with my iphone (activated/synced for 2 weeks with no problems). I had a problem due to a disk full which corruped Outlook.
I cleared substantial disk space, reinstalled Outlook 2003. This seemed to have corrupted the iTunes sync function, so I uninstalled iTunes (using Add/Remove Programs control panel), and have since been trying to reinstall. I am continually getting the "iTunes installer Completed - The installer encountered errors before iTunes could be configured" error message.
I have read many messages and suggestions in these discussions, and already tried the following:
Completely uninstalling iTunes and Quicktime (iTunes no longer shows up in the Add/Remove programs or using the Windows install cleanup utility) follwing all the steps listed in "Removing iTunes, QuickTime, and other software components for Windows XP" http://docs.info.apple.com/article.html?artnum=93698.
Quicktime (version 7.2 Pro) is currently installed. I can cleanly install/remove Quicktime alone with no errors, but not using the combined quicktime/iTunes installer.
I have tried redownloading the itunes installer several times, and even used the Apple Software update download only option and then manually running the itunes.msi file, but still get the same error.
I have tried manually removing all instances of iTunes/iPod/activesync/iphone that I can find in the registry and all the iTunes/iPod folders as the above knowlege base article instructs.
There must still be some other remnant of the old install, because if I try to install iTtunes 7.2, I get an error message that a later version is already installed, but I have not been able to find anything else.
I have even enabled the verbose logging, the error seems to occur in this section of the log:
MSI (c) (00:C8) [11:00:26:796]: Invoking remote custom action. DLL: C:\DOCUME~1\[myusername]\LOCALS~1\Temp\MSI36.tmp, Entrypoint: iTunesLaunchConditions
Action ended 11:00:26: iTunesLaunchConditions. Return value 3.
MSI (c) (00:FC) [11:00:26:859]: Doing action: SetupCompleteError
Any suggestions on what else I can try would be appreciated. One of the main reasons I need sync my ipnone to my work windows machine is to keep my Outlook contacts and calendar. I have no problems with iTunes on my macs.
I am running XP SP2, and have local administrator rights on my Dell 610 notebook.I had to find this solution from another site, so thanks to all the people who viewed this thread & knew how to fix this but didn't bother.
If anyone is weary enough to come to this forum to solve this problem, here is one solution that worked for me & it may work for you if you encounter the error:
"the installer encountered errors before safari could be configured"
1. Use a trustworthy registry cleaner to clean your registry such as Ccleaner or Advanced System Care. This step may not be necessary though.
2. Go to "C:\Users\MyUsername\AppData(Hidden)\Local\Temp" & delete everything in it.
3. If step 2 still doesn't allow you to install Safari, then try:
4. Open Start type "CMD" in the search button, then in the cmd prompt "Regedt32"
5. In the reg editor open:
"Computer" / "HKEYCURRENTUSER" / "Software" / "Apple Computer, Inc." & try deleting the entries for any Apple programs that may be causing any conflicts.
Be aware that any programs that you delete registry entries for may not function correctly afterwards or need to be reinstalled, but this more drastic measure should hopefully allow the installation of Safari browser.
Hope this helps any further visitors to this forum looking to solve this problem it worked for me, good luck.
Message was edited by: RottenestApple -
Installer Encountered Errors before iTunes could be Configured
I keep getting the same Error over and over again:
*iTunes Installer Completed*
The Installer encountered errors before iTunes could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click Finish to exit the Installer.I'm using version 8.2 lately and i downgraded to version 7 for some reason.... After i got my new iPhone 3GS yesterday. Which is needed the 8.2 version....So i uninstall the version 7 and re-install the version 8.2 again and i got this message....
*"A NETWROK OCCURED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\BONJOUR.MSI".....*
I try to check this file in my C:\ Drive but unfortunately i can't find it and i can't install the iTunes 8.2..... and the bad thing is i can't f#*******ing use my new iPhone 3GS....
Please help me or otherwise maybe just return it to the shop and get something else instead of this new iPhone 3GS...... too much trouble.... -
I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously.
Maybe you are looking for
-
How can I set the font size of a form field in the fdf file?
I need to dynamically set the font size of a field to accommodate text of varying length, automatic font size won't work in this case. It seems like this can be done in the FDF but I have tried several variants without success. Could someone help out
-
Excise Value and Freight value should be add to material cost in the depot
Hi, Can any one help me on my scenario? We have depot concept my client requirement is excise Value and Freight value should be add to material cost (inventories at depot) in the depot Thanks & Regards KMR
-
How to create multiple page pdf file
Hello, Sometimes I need to create multiple (more precisely double) page pdf file from another pdf file to reduce the printing cost of the document. For this I crop the single page document and then print it in a double page pdf file (in landscape). B
-
when i put my n97 in charge the charging light comes on like usual however after a while the screen turns all white and the nokia sign also comes up like usual but then it only shows one charging symbol and when i press the switch on button the scr
-
Tabindex is not going for checkbox and buttons in Safari 5.0.4. Any solutions?