Installing 10.1.3.1 (want to upgrade to 10.1.3.4) with 11g Database

I want to install SOA Suite 10.1.3.4 on a new laptop I have. I have ins
I checked the certification matrix and saw that SOA Suite was certified with 11.0.6 version of the Database so I installed the 11g database no problem and went to install the SOA SUite 10.1.3.1 last night (would then patch up to 10.1.3.4 afterwards).
I choose Advanced Install, as I want to put the schemas in my 11g database but when I put in my connection details for the DB a window pops up saying that it must be installed on the correct version of the DB, it lists a load of them but 11g is not one of them (10.2 series was the highest).
So 10.1.3.4 is certified with 11g but you can do the base install on 11g, Is this correct?
Are there any workarounds?
I assume one option is to do a Standard Install where it creates the XE database, then patch up to 10.1.3.4.
Then some how point everthing to my 11g DB afterwards.
Any ideas?
Stuart

just found the solution. One needs to follow patch instructions 6265268 even before starting installation to replace the relevant jar files in the installable.
Also, refer to metalink note 605489.1

Similar Messages

Upgrade R2 to R3 (Same box) , with Audit database

Hi Experts,
We do not have a new Production Server for new R3 installation.
We are going to upgrade the current R2 to R3 in the same box. (With AD as authentication).
We have turned on the Audit service as well. So we have2 databases - CMS and Audit databases.
May I know what are the steps to perform this upgrade?
Can I use the same audit database? Or should I create a new audit database?
Do I need to turn off the audit feature before upgrading to R3?

The current environment is R2 with SP2...
We use Java Tomcat as web server, Windows AD as authentication, SQL 2005 DB for CMS and Audit Databases.
Install R3 from scratch? So we will have both R2 and R3 in same machine?
In that case, I should get the DBA (we do not have rights to create DB) to create 2 empty databases (CMS and Audit) for R3...
Below are the steps I can think of, to have 2 BO in one machine:
1. Get the DBA to create 2 new databases
2. Install R3
3. Point CMS connection and Audit connection to the new databases
4. Use the import wizard to import reports/users/universes.
Below are the steps for upgrading R3 (only one BO in one machine):
1. Install R3
2. Choose the option "Upgrade"
Did I miss out anything? Appreciate your advice. Thanks!
Edited by: BK Ong on May 11, 2010 11:46 AM

OC4J installed with 11g Database

We are migrating our database and applications to 11g database and imbeded Application Express. Our current configuration is 10g database and JSPs running under the OC4J installed with the database. Our develoment server is running Windows XP and currently has 11g database 11.1.0.6.0 installed, and the Application Express configured and running properly.
In order to provide a smooth transiition from OC4J to Application Express, we would like to continue to run some applications under the OC4J installed with the 11g database, and the converted applications in Application Express, all on the same server and same 11g database installation.
I have started the OC4J processes on the development server with the script:
cd \Oracle\Ora11g\Ora11gDB\oc4j\j2ee\home
java -jar oc4j.jar
and the system responds with:
09/01/08 10:53:29 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
However, when I try to bring up the console from a browser using:
http://192.168.0.200:8888
I get a the message that the page cannot be displayed.
I understand the 11g OC4J standalone has been discontinued, however it looks like the 11g version I have installed is using the OC4J 10.1.3.0.0.
So is the OC4J installed with 11g not functional, or am I missing a step in the startup/configuration, or URL call.
Thanks,
Rod

Thanks for the replay Michael,
Actually, on the development server I only have the 11g database installed with Application Express configured. The Apex runs on port 8080 and I see that in the netstat -ab listing, but I do not see port 8888 referenced anywhere. All the config files for the OC4J are standard from the db install. The port listed in the http-web-site.xml still shows 8888.
Is it possible that the OC4J is not completing it's startup?
The server.log, and the system-applicaiton.log both show entries indicating it has started, and the global-application.log shows it is started, however the defaultWebApp is not currently started. Here is the complete contents of that file:
09/01/08 10:21:34.640 10.1.3.0.0 Started
09/01/08 10:21:35.937 defaultWebApp: 10.1.3.0.0 Started
09/01/08 10:22:13.968 defaultWebApp: 10.1.3.0.0 Stopped
09/01/08 10:22:20.109 10.1.3.0.0 Started
09/01/08 10:22:20.890 defaultWebApp: 10.1.3.0.0 Started
09/01/08 10:49:06.203 defaultWebApp: 10.1.3.0.0 Stopped
09/01/08 10:53:28.687 10.1.3.0.0 Started
09/01/08 14:45:45.781 10.1.3.0.0 Started
09/01/08 15:06:21.421 10.1.3.0.0 Started
09/01/08 15:07:06.218 10.1.3.0.0 Started
Thanks,
Rod

ThinkCentre USFF M57P 9071-A8U: I Want to Upgrade The Graphic Video Card

Hello guys. I currently own an IBM Lenovo ThinkCentre M57p 9071A8U ultra small factor form. I already upgrade the CPU bios to 2RKT64BUS (01/08/14), an Intel Core 2 Quad Q6600 2.4 GHz Quad-Core, 4GB PC2-6400 memory ram and Windows 8.1. The integrated Intel Q35 Express video Chipset is great but I want to upgrade it. The system comes with a PCI-Express slot and a PCI slot riser on it. I actually changed the riser to a PCI/ADD2-R Riser V3.1 Adapter Card PCI-E:
Link to image 1
I had to do some adaptations to make this riser fit, but the system accepted the riser and all drivers were properly installed. This riser allows to install a PCIE x1 card. I bought a Lenovo 41T2725 ATI X1600 Pro 256MB Video Graphics Card (GV-RX16PIU-RH LVK-X1600):
Link to image 2
ATI does not support Windows 8 for this graphic card but I used Windows 7 64 bit drivers and software for this. I connect my monitor to the X1600 VGA port. The problem is that the computer boots until the Windows 8 logging screen and after that the screen gets black only showing the mouse cursor. At that particular point, if I unplug my monitor from the X1600 VGA port and plug it to the M57P VGA port, I can see and use Windows normally. But if I leave the computer plugged to the M57P VGA port, I would not see the ThinkCentre bios screen nor the Windows 8 logging screen. The screen is black until the Windows operating system screen. The Intel Q35 integrated video does the opposite of the X1600. This very confusing. I have tried playing with the bios video section but nothing has changed.
I really would like to upgrade my video card on my system. Any help would be greatly appreciated! Thanking you in advance,
Reaccion
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

I noticed that there is an ATI Video BIOS Flash Utility for ATI Radeon X1600 Pro graphics adapters which will upate ATI Radeon X1600 graphics adapters to video BIOS S3A67621.109. :
http://support.lenovo.com/en/downloads/ds000784
This is for Windows XP (32-bit) only. I am using Windows 8.1. Would by any chance be an ATI video Bios flash for this X1600 Pro card for a 64 bit operating system??

I want to upgrade my macbook pro with new mac pro (2011).any ideas?

i want to upgrade my mid 2010 mac pro with the latest one. what i need to do for this?

there is no new 2011 Mac Pro other than new firmware to enable Lion only.
you can upgrade the processor easily if it is a single socket to W3680 for mere $619
If you are not talking workstations you're in wrong forums.

I own a Mac OSX version 10.4.11 with Illustrator, Photoshop, & In Design CS. I want to upgrade to a

I own a Mac OSX version 10.4.11 with Illustrator, Photoshop, & In Design CS. I want to upgrade to a mac book pro with the latest version of these programs. Can I do this and how?
Thanks, Joan

I understand that it is difficult to determine which forum to post in since there are so many. This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention.
I'll put this posting in the installation community so the experts there can help you.
We also have many other forums relating to other Adobe products
http://forums.adobe.com/community/
http://forums.adobe.com

R12: 11g database upgrade

Hi,
I'm successfully upgraded 11.5.10.2 to 12.0.6 and i'm able to login to application also.Now i'm working on upgrade from 10.2.0.3 to 11g database and trying to apply for one of the interoperability patch for 12.0.4 (6928236) and getting following error.please help me to resolve the issue.
Error: Applying zpbecm.plb to the wrong release:
Patch : /u08/stageR12-32bits/patch/6928236/zpb/patch/115/sql/zpbecm.plb, v120.0.12000000.4
On-Site: /u1690/oracle/oad6appl/zpb/11.5.0/patch/115/sql/zpbecm.plb, v115.24
Error: Applying zpbecm.pls to the wrong release:
Patch : /u08/stageR12-32bits/patch/6928236/zpb/patch/115/sql/zpbecm.pls, v120.0.12000000.4
On-Site: /u1690/oracle/oad6appl/zpb/11.5.0/patch/115/sql/zpbecm.pls, v115.22
Error: Applying zpbpa_attach_s.sql to the wrong release:
Patch : /u08/stageR12-32bits/patch/6928236/zpb/patch/115/sql/zpbpa_attach_s.sql, v120.0.12000000.4
On-Site: /u1690/oracle/oad6appl/zpb/11.5.0/patch/115/sql/zpbpa_attach_s.sql, v115.14
Error occurred in version checking.
See above error messages or AutoPatch log file for details.
Exiting AutoPatch...

Hi,
Try to rename those files and see if you get the same error.
If the above does not help, I would suggest you log a SR since no similar error is reported in Metalink.
Regards,
Hussein

I have a hdd from late 2009 that I upgraded from leopard to snow leopard to lion to mountain lion. I want to upgrade the hdd to ssd. Do I need to buy a new copy of mountain lion to install on the ssd? If not, then what is the procedure to transfer?

I have a hdd from a late 2009 mbp. I upgraded from leopard to snow leopard to lion to mountain lion. Now I want to upgrade to a ssd. Do I need to purchase a new copy of mountain lion to go on my new ssd? If I don't, then what is the procedure to transfer mountain lion with my 4 user accounts onto the new ssd from the hdd?
I'm confused on if I can use the recovery hd on a thumb drive to install mountain lion on my ssd. Will it be pheasible with so many OS X upgrades? And then how do I get my user accounts onto the ssd from the hdd. Do I use migration assistant? Do I need to make a time machine backup first? Should I use something called Carbon Clone or something like that?
Thanks for reading

If you have a cable that connects and external HDD to the MBP, it will do. If it is something like this, an enclosure will not be needed for the swap:
An enclosure allows you to use your old HDD for storage or backup purposes. The cable will not.
Here are instructions as to how the swap can be performed using DISK UTITY. Substitute You cable for the enclosure in same:
INSTALLING A NEW HDD IN A MBP
1. Make certain that you have backed up all of your important data.
2. You will need a HDD enclosure. One with a USB connection will do. A 9 pin Firewire is better.
3. Install your new drive in the enclosure and connect it to your MBP.
4. Open DISK UTILITY>ERASE. From the left hand column drag the new drive into the 'Name' field. Make sure that the format is 'Mac OS Extended (Journaled)'. Click on the 'Erase' button.
5. Click on the 'Restore' button (on top). Drag the old drive into the 'Source' field and the new drive into the 'Destination' field. Click on the 'Restore' button on the bottom right hand corner.
Depending upon the amount of data you are transferring, this may take a couple hours or more. A Firewire will speed up the transfer. This will result in both drives having identical information on them.
6. After the data transfer has completed, you may swap the drives. Start the MBP and you have finished the installation. The initial boot may take a bit longer than you are accustomed to, but that is normal.
7. When you are satisfied that the new hard drive if functioning properly, you can erase the old drive and use it for any needs that you may have.
If there is any confusion on your part, post back.
Ciao.

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive? I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

I want to upgrade to Mavericks. Will I need to reinstall all of my apps and copy my files back to the hard drive? I have not installed an OS on a Mac before and I'm wondering whether it is as involved as on a PC.

Short answer: You do NOT have to reinstall all your apps and copy your files back.
Longer answer: Upgrading the OS does not touch any user files. Upgrading the OS should not interfere with any applications which are compatible with Mavericks. In my experience non-Apple apps are generally left unchanged by the upgrade. It is possible that some apps may need to be upgraded. One good resource for checking application compatibility is RoaringApps.
Finally, it is always wise to backup everything, just in case.

I want to upgrade my imac 10.4 Tiger to Snow leopard but will not install as it states I need 1GB RAM please help?

I want to upgrade my imac from 10.4.11 Tiger to Snow Leopard, I have tried to install but it states I need 1GB RAM to install
can anyone help as to what I need to do next.
Thanks

Go to a site such as OWC's or Crucial's and buy the RAM.
(124598)

Want to upgrade hard drive and install SL

Hi
I own a 4 year old Macbook Pro with Leopard (15", A1211, 2.33 Intel Core 2 Duo). I want to upgrade the hard drive. I am planning on just removing the old one, and placing the new hard drive into it. Then buy a Snow Leopard ($29) and install it.
Is that possible? or I need to install Leopard (I own the DVD, the $129, my MBP came with Tiger) and then upgrade to SL?
I also am not sure if my DVD drive of MBP is working. It rejects any CD or DVD inserted into it. So, can I used an external DVD drive (USB connected) for installing the SL?
Do I need to take any other precautions? I have a Time Machine backup of almost everything on my HDD.

You can install Snow Leopard from the $29.95 version.
As for the optical drive not working, I'd get that fixed first. It may be due to the clock battery beginning to age, or dirt or dust in the drive, or damage to the drive. Not all external DVD drives work. The ones from http://www.macsales.com/ do. Bring it in to a service center to make sure the Clock battery isn't beginning to go. That typically happens after 4 years.
Before installing anything new, backup your data at least twice*:
http://www.macmaps.com/backup.html
And then follow these steps to upgrade*:
http://www.macmaps.com/upgradefaq.html
- * Links to my pages may give me compensation.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

HT1338 I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

You have entirely too little free space on the boot drive, for best performance it's best to have hard drives only 50% filled max and never more than 80% filled.
See Storage Drive here and reduce some space also make a seperate bootable clone backup of all your data BEFORE upgrading
Most commonly used backup methods
see here for how to find your disk space
Why is my computer slow?
If you upgrade and it doesn't go right or slows the machine down you might need to erase and install, which all your programs will have to be reinstalled from original sources and files from backup.
How to erase and install Snow Leopard 10.6
If you can't do this, then hire a local PC/Mac specialist.
Do not upgrade to 10.7 or 10.8 on that older machine, it will slow down and you will lose all your PPC based programs.
Leave the Lions for a brand new machine with a SSD drive.

By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If I install this sof

By entering App store I get a message that a software update, but this software I have never installed on my computer if I want to upgrade what message he sends me a says this with a different account to mine, will not let me update. If Iinstall this software (FACEBOOK), I put as account user account that is not mine, if you change to my account, send an error and will not let medesacragarlo.As I can remove the software actaulización notice?

Hi...
I replied to you here > https://discussions.apple.com/thread/3851006?tstart=0

Installing 10.1.3.1 (want to upgrade to 10.1.3.4) with 11g Database

Similar Messages

Maybe you are looking for