Installing 10.1.3.1 with 10.1.2.0.2 breaks the latter
Hi there,
I installed SOA Suite 10.1.3.1 on a Windows XP machine where BPEL Designer 10.1.2.0.2 was already installed.
Both installations were based on the Olite database.
This broke the 10.1.2.0.2 release. The BPEL Server no longer started as it was apparently not able to connect to its datastore any longer.
I also noticed that the 10.1.3.1 installer creates multiple environment variables, like ANT_HOME, CLASSPATH, JAVA_HOME. Moreover it prepends the PATH env variable of Windows. Brrr ...
Deinstalled, moving it into its own VMWare machine.
Can this be avoided so that the two can co-exist (other than in separate VM's)?
Thanks, Sjoerd
This did the trick! I restored the important values in odbc.ini and polite.ini. The install saves a copy of the old files (e.g. odbc.ini.bak.1) which helped me locate the old paths. Here were the changes needed in odbc.ini:
< Driver32=C:\Oracle\bpel10121\integration\orabpel\bin\olod2040.dll
Driver32=C:\Oracle\product\10.1.3.1\OracleAS_1\Mobile\Sdk\bin\olod2040.dll< DataDirectory=C:\Oracle\bpel10121\integration\orabpel\system\database\olite
DataDirectory=C:\Oracle\product\10.1.3.1\OracleAS_1\bpel\system\database\oliteHere are the changes in polite.ini:
< DataDirectory=C:\Oracle\bpel10121\integration\orabpel\system\database\olite
< MessageFile=C:\Oracle\bpel10121\integration\orabpel\bin\olite40.msb
< DB_CHAR_ENCODING=Native
DataDirectory=C:\Oracle\product\10.1.3.1\OracleAS_1\Mobile\Sdk\OLDB40
MessageFile=C:\Oracle\product\10.1.3.1\OracleAS_1\Mobile\Sdk\BIN\olite40.msb
DB_CHAR_ENCODING=UTF8
Similar Messages
-
Can you install Tiger onto a drive with data?
Hello,
I would like to ask if you can install Tiger onto a hard drive that already has data files on it. I have a 250 GIG hard drive and it already has 10 GIGs of data on it. Can I install Tiger on this drive or might it corrupt my files?
Its a long story but here is a quick summary of why I am attempting to do this:
I have a 350 MHz Blue and white G3 (rev 1) with two hard drives: the original 12 GIG ATA drive and a 250 GIG SATA drive (internal) connected with a 1S2 Seritek SATA controller.
My 250 GIG drive has two partitions but only one is available to Tiger. You see, by accident I originally formatted my 250 GIG drive with an extremely small partion (32 Megs). I meant to type "30 GIGs" and by accident I typed "30 Megs". Oops That was supposed to be my OSX 10.4 volume. Its too late now - its too small. So I only have two choices for a place for TIger: my 12 GIG drive or the other partition of my 250 GIG drive. I am reluctant to choose my 12 GIG drive because it already has an older OS on it (OS 8.6).
I was concerned about installing TIger on the data partition of the 250 GIG drive because that is where all my valuable data files are - 10 Gigs of data. I don't want to risk scrambling this data in any way.
Is it safe to install Tiger onto this partition with my data files? Or is the possibility it might do something to my data.
Its only a temporary install so that I could burn my 10 GIGs of data files to DVD for backup and then I will start all over again and erase the entire hard drive and reinstall from scratch onto the 250 GIG drive once my data files are safely backed up. (I will not partition the 250 GIG drive i nthe final install - it will be one big partition.)
One other question:
When you format a disk in Tiger are there options to "low level format" or "zero all data" or will just a straight "erase" do the job sufficiently? I bought my 250 GIG Hitachi SATA drive new and so I am not sure if it worth the time to re-erase it with "zero all data" (if that is an option in the Tiger Disk Utility). What is the best formatting option to prepare this drive in the most beneficial for Tiger?
Thanks for any suggestions.Thanks scb and Jeff,
Jeff, you have me thinking now. I think I will be safe and try another idea. I have a 4 GIG internal SCSI drive I could use to backup my data in 4 GIG sections at a time via my Adaptec 2430 SCSI card. I could then move this hard drive over to my other G3 onto its 40 GIG hard drive. This would be done three times to take off all my data and essentially provide a backup before I install Tiger. Good idea. You are right. It is better to play it safe.
By the way 8.6 can handle HFS+. And yes, I should eventually buy an external drive solution - probably an enclosure. I saw one called "coolmax" [1]. It could hold a SATA drive and it had USB, firewire and also an external SATA port.
And also Jef thanks for the info about formatting drives. I am glad to hear it is not important to zero all data if you don't have to. I am not concerned about havig anything to hide and so yes, I will just click "format" - that should be fine. Zero all data takes such a long time and I would rather avoid using it if I don't need this feature. Thanks for the advice.
Thanks for the new safer direction.
[1] Coolmax (CD-311-SATA Combo)
Coolmax Aluminum USB 2.0 External Case/Enclosure for 3.5" SATA/IDE Hard Drives, USB2.0, IEEE1394a, Serial ATA triple interface input CD-311-SATA Combo
http://www.iocombo.com/product/showproduct.php?productid=0EGD&PHPSESSID=3c41735b f27252cf17a17350cb603e0e
$69.95
http://store.yahoo.com/directron/35enclosure.html
$53.99 at directron -
ITunes will not install correctly on my PC with Windows 8. Any hints?
iTunes will not install correctly on my PC with Windows 8. Any hints?
The error message reads:
iTunes.exe - Entry Point Not Found
The procedure entry point ADiAdlD_AcquireMatchSlotIfNecessary could not be located in ghe dynamic link library C:\Program Filess(x86)\iTunes\iTunes.dll.See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates -
SharePoint Foundation 2013 - Multi-tenant Install and OneDrive for Business with Yammer i
Hello,
After installing SP Foundation 2013 (SP1) with Partitioned service applications we have noticed that while clicking on the "yammer and oneDrive" link the below error message comes up:
_admin/yammerconfiguration.aspx
any ideas??
http://technet.microsoft.com/en-us/library/dn659286%28v=office.15%29.aspx
we have also noticed that MS mentioned "OneDrive for Business with Yammer integration doesn’t work for multi-tenancy or partitioned service applications for on-premises deployments"
jaULS
Application error when access /_admin/cloudconfiguration.aspx, Error=Object reference not set to an instance of an object. at Microsoft.SharePoint.WebControls.SPPinnedSiteTile.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control
namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control
namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
=====
To me it seems SharePoint social networking features require the full SharePoint Server product AND are not available with the free SharePoint Foundation, If correct then why MS punching it here in Foundation without a friendly error message..
ja -
I installed a new printer and now Photoshop Elements tells me I can't print. The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available. You will need to check your printer settings before printing." I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.
Hi ,
Please update to PSE 13.1
13.1 has solved this problem.
Refer to this link.
Photoshop Elements Help | Printer errors with Photoshop Elements 13 -
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7
Unable to install SQL Server 2012 along with BIDS & VS 2012 on Windows 7 professional.
I get the below error
Could not find vsjitdebugger.exe
Blogs say anti-virus is stopping but I dont have one on the system.
Note: I had used SQL 2008 on the system previously and has a refresh i have deleted all the software to speed up the system.
Now i could not install both the software.
Can I get some help regarding this?Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li -
Can't get adobe reader to install on my new laptop with windows 8
I can't get adobe reader to install onto my new laptop with windows 8. Basically what happens is that I start the download from the adobe screen by clicking the yellow download button, then I click run (I've also tried save and run), then I allow the program to make changes to my hard drive, and then finally a blank grey box appears in the in the middle of the screen, titled "adobe reader installer". After this box appears nothing else happens. I've let it sit for at least 30 minutes and still nothing. I've also disabled my pop up blocker, and set the security settings to default as suggested in other posts. Unfortunately this is the only pdf program that works for the site we have to use to write contracts, so I need to get this figured out asap. Thanks in advance for any help and advice.
Try installing from http://get.adobe.com/reader/enterprise
-
I have tried to install Creative Cloud but I just get a blank white screen with a black Creative Cloud bar at the top. There are no options to choose 'Apps' etc. Can anyone help?
What happened yesterday may have been caused by the SOPA protest action that was joined by a lot of sites yesterday and such an action won't happen that often.
* http://en.wikipedia.org/wiki/Wikipedia:SOPA_initiative/Learn_more
*http://en.wikipedia.org/wiki/Wikipedia:Bypass_your_cache -
I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problemActually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.
-
i have a mac osx version 10.6.8 no windows installed and i am trying to install a program but keep getting can not run in dos mode ( the disk says on back works on intel mac with parallels or vm fusion) is this program not compatible with my mac?
You run Windows in Parallels or Fusion. Then in Windows you install the program.
-
Hi,
I am unable to install extensions, they show up with "will be installed after you restart Firefox" even after I restart.
The "Staged" folder is present and remains after a restart, but the extensions do not get installed. They show in the extensions page with the "will be installed after you restart Firefox" message and remain like this no matter how many times I restart.
Any Idea's?
Running Firefox 24.0 on Windows 8.1
Many Thanks,
BD
P.S. Just tried to install the "troubleshooter" add-on before posting the question and I got an error saying it cannot install because it cannot modify the needed file. (I did it manually instead)It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the extensions.* files (e.g. extensions.sqlite, extensions.ini) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled or not compatible extensions in "Firefox/Tools > Add-ons > Extensions" then click the Tools button at the left end side of the Search Bar to check if there is a compatibility update available.
If this hasn't helped then also delete the addons.sqlite file. -
I am trying to install Adobe premiere elements 8 on my new computer (Windows 7). The program ansvers with "the program is not installed or can be damaged". Then aborts the installation.
It`s right, the program is not istalld, it is what i`m trying to do. And there is no problem whit the DVD. Any suggestions?"Error 1303: Installer has insufficient privileges" or "Error 1304: Error writing to file" | Install | CS3, CS4, CS5 pro…
this link FIXED MY PROBLEM! i did the steps to the programdata\adobe folder and it installed FINE! -
ITunes installed on a new drive with music on an old drive: how to keep the music data?
I had iTunes installed on my old HDD with all my music on it. It was the drive C:\
I just installed a new SSD (now the C:\ drive) in my computer. I also installed iTunes on it. I want to leave my music on my old HDD (now the G:\ drive). I can scan with iTunes for my music on my old G:\ drive, but that means I won't have the star ratings nor the play count...
I tried to copy and paste the iTunes Library.xml from my old G:\ to my new C:\. When I opened iTunes, it had all my music and the data, but I had to locate manually every single song (in a 7000+ songs library, this is a bit of a problem).
Is there a way to edit the iTunes_library.xml file to change the path of every song in it (from C:\ to G:\) since this seems to be the issue? Or how could I keep my music on my G:\ drive and itunes on my C:\ drive while keeping my music data?
Thank you!
Specs:
Windows 7 sp1
SSD: Plextor M5P 256GHello papapavvv,
Thank you for providing so much information about what is going on. It sounds like you have your iTunes Library on your G:\ drive, but it sounds like iTunes is not opening iTunes Library.itl file on the external drive. Follow these steps to point iTunes to your G:\ drive:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M. -
What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear
You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.
-
My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?
Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading?
Maybe you are looking for
-
ITunes takes a long time to open, or doesn't open at all.
I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.
-
How to zip the folder in application server?
how to zip the folder in application server?
-
Unable to control brightness in target display mode
I use my 27" mid2010 iMac as a display for my MacPro. However after the Mac OS X recent update to 10.6.8, I noticed I am unable to control the screen brightness. Usually, I was able to do so using the iMac keyboard to adjust brightness etc. but now t
-
Cant able to see V1 Master Oranization in Change Organization window
Hi , When i'm trying to change the Organization to V1 it is not displaying in change organization window in Inventory Responsibility. I checked in Inventory -> Setup -> Organizations -> Organizations -> Vision Operations. The disable date is blank. S
-
Help!, Ipad mini wont turn on even pressing both the home+power button
iPad wont turn on anymore even i press the home + power button (sleep/wake), nor even if i plug it with the orig. usb to the pc and to the charger! It doesnt respond to anything!. To simplify my problem, heres what i have done: * I let it plug into