Installing 10g adapters with SOA suite 10.3.1

I am trying to do a full install (run-time & design-time) Adapters (JDE) for Oracle 10g on an existing installation of SOA suite 10.1.3, with app server 10.3.1. The product documentation talks about installing J2EE and web cache installation, but in this forum I also read that adapters are not supported for this release. It would very helpful if somebody could tell me the steps and products that I need for installing the adapters. The installation presently on my machine are:
1. SOA Suite 10.3.1
2. Jdeveloper
3. Oracle XE database.

@Shailesh: I ran into the same problem, so i think that it is the same: You probably just have the wrong Version (10.1.2.0.2 or so) of Adapters. Try the one from this page, which installed without problems on my machine:
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
The documentation for this version is available here: http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28995/toc.htm
@user605650: Universal Installer always proposes a new ORACLE_HOME with its own name and file location. This is indeed a bit misleading. Just do not type a new path for the new Name. Simply choose the Name(!) of the SoaSuite-OracleHome from the Dropdown-Box above the Path-Inputfield (something like oracleas1 or so), and the Path-field will update itself. Then just do the installation.
Hope that helps, bye,
Magnus

Similar Messages

JCA adapter Integration with SOA suite

Hi all,
Where can I find documentation or reference regarding integration of third party adapter with SOA suite?
There is an option of Third Party Adapter in SOA project of JDeveloper. When I drag it onto the composite.xml file, a window comes up asking for wsdl, jca files, etc. So I would like to know if there is any example or tutorial on how to integrate a third party adapter with SOA suite. Thanks.
Regards,
K.Hein

Thanks Anuj!
It seems like a new way of integrating JCA adapter to SOA suite.
Actually, I was only aware of integrating as a third party adapter as mentioned in this article (http://www.oracle.com/technetwork/articles/luttikhuizen-adapters-091679.html) which require wsdl and jca files.
Are there any difference between those two approaches? Which would be the recommended approach for JCA adapter integration with SOA? Thanks again for your informative replies.
Regards,
Kyi Hein
Edited by: K Hein on Jan 18, 2011 12:30 AM

Install 10g discoverer with EBS R12

Hi,
I want to install 10g discoverer with EBS R12,
Please send me any document and steps needed to install and configure it?
Thanks,
Kavitha

Pl follow the steps in MOS Doc 373634.1 (Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12)
HTH
Srini

What is OLite database which come with SOA suite ?

Hi
Thank you for reading my post
I saw that there is something named OLite database that installs with SOA suite in Standard mode , can some one explain me what is this product ?
thanks

oLite is the shortcut for Oracle Lite - which is a small database, storing
a) bpel data, like it's process artifacts, as well as execution data - audittrails,
b) dt and runtime data from ESB
c) OWSM configurations
without this component running, the SOA Suite will not work
For production use we recommend to install a fledged oracle db - and run the repository creation assistant, which will create the needed db objects
hth clemens..

What is the highest Java version running with SOA Suite v10.1.3.3 ?

What is the highest Java version running with SOA Suite v10.1.3.3 ?
From my point of view at least v1.4.1
Maybe v1.5
but not v1.6
Is this true?
Peter

I guess only 1.5.
1.6 is officially not supported and 1.4 does break stuff, I tried running it with it, and didn't even come up.
Regards,
Chintan

Weblogic not startng after configuring weblogic92 with soa-suite 10.1.3.4

Configurig WebLogic 9.2 with soa-suite 10.1.3.4 .New domain has been created sucessfully.Wheh tried to start weblogic using command in
C:\bea\user_projects\domains\SOADomain\bin
Error comes :
Provider javax.xml.stream.XMLInputFactory could not be instantiated:
java.lang.InstantiationException
javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be instantiated:
java.lang.InstantiationException
Please respond as it is becoming a stuck point in carrying out deployments

Configurig WebLogic 9.2 with soa-suite 10.1.3.4 .New domain has been created sucessfully.Wheh tried to start weblogic using command in
C:\bea\user_projects\domains\SOADomain\bin
Error comes :
Provider javax.xml.stream.XMLInputFactory could not be instantiated:
java.lang.InstantiationException
javax.xml.stream.FactoryConfigurationError: Provider javax.xml.stream.XMLInputFactory could not be instantiated:
java.lang.InstantiationException
Please respond as it is becoming a stuck point in carrying out deployments

Dynamic Adapter (endpoint) with SOA suite/OSB

We have a requirement to set the adapter type for referenced services during the runtime, that is to say that we cannot decide whether to use FILE adapter, FTP adapter or JMS adapter or Web Service during design time.
I know we can use dynamic partner link to set the properties of adapter (for example, dynamic set the output folder for FILE adpater), but can we even set the adapter type during the runtime? For example, use FILE adpater if order amount < 1000, otherwise use FTP adapter.
I'm fresh with SOA suite and OSB. Can anybody help me out?
BTW: without OSB service virtulization, is it possible to change the adapter for composition service after deployment. For example, in design time, I used Web Service for composition service (one-way), but after deployment, i'd like to change it to FILE adapter.
Much appreciate in advance.
Kevin

Hi Kevin,
For example, use FILE adpater if order amount < 1000, otherwise use FTP adapter.For this use case, you may easily use Dynamic Routing action in OSB. Please refer -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1100135
Re: OSB proxy service lookup
Regards,
Anuj

OSB Free with SOA Suite licensing?

Is OSB comes free with SOA Suite Licensing, in other words do we need to take a separate license for OSB, in case we have for SOA suite??

I think OSB requires a separate license but you may confirm it with your local Oracle Sales Representative -
http://www.oracle.com/us/corporate/pricing/technology-price-list-070617.pdf
Regards,
Anuj

Installing B2B with SOA suite 10.3.1

I have installed SOA suite 10.3.1 and Oracle XE as DB. Now, I want to install B2B, could anyone give me pointers as to where to download it from and how to go about the installation process. Thanks in advance

Hello,
The latest version of Oracle AS B2B is 10.1.2.0.2. Please download B2B from OTN Download site under Application server + Application Server 10g (10.1.2.0.2) + Application Server Integration(10.1.2.0.2).
Please let us know if you have any questions.
Also, you may be interested in taking a look at the Installation Best practices document for B2B and SOA suite in the following URL.
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_SOA_Suite_Installation.pdf
Rgds,Ramesh

Service Registry 11g with SOA Suite 12c?

Hello,
I'm currently working on a project which requires SOA Suite and BPM 12.1.3 and databases 12c.
Question 1 : I didn't find a Service Registry 12c release, is it included in another 12c middleware product or do I have to work with Oracle Service Registry 11gR1 PS 5 (11.1.1.6.0) and associated WLS 10.3.6?
Question 2 : If I have to install OSR 11g, I noticed "Database Selection" screen only suggests Oracle 10g or 11g, is it possible to work with a 12c database and bypass a possible warning?
Thank's
Daniel

Hi
You still need to install the uddi seperate.
http://www.oracle.com/technology/tech/soa/uddi/index.html
After installing it you will get a few urls where you can manage all your services.

Db adapter setup with SOA Suite 10.1.3.1 on SLES 9

Unable to deploy any database adapters to BPEL Process Manager on SOA SUITE 10.1.3.1. Components not using a DB Adapter appear to be working ok.
SOA Suite 10.1.3.1 is deployed on SuSe Linux Enterprise Server 9 Intel 64 bit with Jdeveloper 10.1.3.1 on Windows XP 32 Bit
Default deploy of a BPEL suitcase containing a single service using a new BPEL project produces the following error when initiated from within the BPEL Console:
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_testDatabaseAdapter_1.0_13729157064958ee187241caef4b05f4.tmp/getSequence.wsdl [ getSequence_ptt::getSequence(getSequenceInput_msg,getSequenceOutputCollection) ] - WSIF JCA Execute of operation 'getSequence' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/opt/oracle/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_testDatabaseAdapter_1.0_13729157064958ee187241caef4b05f4.tmp/getSequence.wsdl [ getSequence_ptt::getSequence(getSequenceInput_msg,getSequenceOutputCollection) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12529
ManagedConnectionFactory problem.
Could not instantiate ManagedConnectionFactory oracle.tip.adapter.db.DBManagedConnectionFactory due to:
     Missing class: oracle.tip.adapter.db.DBManagedConnectionFactory
     Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
     Loader: oracle.bpel.common:10.1.3
     Code-Source: /opt/oracle/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
     Configuration: <code-source> in /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
This load was initiated at orabpel.root:0.0.0 using the Class.forName() method.
The missing class is not available from any code-source or loader in the system.
Please make sure the corresponding JCA Resource Adapter has been deployed.
commented out the jca:address in the WSDL and tried to update oc4j-ra.xml per generated comments

still didn't work. yes did restart application server
tried following the tutorial samples 122.DBAdapter\File2Table README.txt, however the directories mentioned do not exist
created directories and placed an oc4j-ra.xml file as per steps 1 and 2. Restarted application server, checked through Oracle Enterprise Manager, JNDI Browser for a corresponding EIS entry- none available.
tried adding also /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/application-deployments/orabpel/datasources/oc4j-ra.xml
Any ideas on how to correctly configure a DbAdapter under SOA Suite 10.1.3.1 would be appreciated?

Same problem also occurred under SLES 10. Notice similar issue in some other threads.
Had to manually install the adapters, replace <pw> with your oc4jadmin password.
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/JmsAdapter.rar -deploymentName JmsAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/DBAdapter.rar -deploymentName DbAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/AqAdapter.rar -deploymentName AqAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/pcapps.rar -deploymentName AppsAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw>deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/fileAdapter.rar -deploymentName FileAdapter -parent default
java -jar /opt/oracle/product/10.1.3.1/OracleAS_1/j2ee/home/admin_client.jar deployer:oc4j:opmn://localhost:6007/home oc4jadmin <pw> -deploy -file /opt/oracle/product/10.1.3.1/OracleAS_1/integration/esb/lib/MQSeriesAdapter.rar -deploymentName MQSeriesAdapter -parent default

Can I install two versions of SOA suite using same Oracle database

Condition:
I installed Weblogic server(10.3.5) and SOA Suite(11.1.1.5), and
I used RCU 11.1.1.5 to create the schemas(Oracle DB 11g-111170) for it.
Plan:
Now I plan to install another Weblogic server(10.3.6) and SOA Suite (11.1.1.6)
and I will used RCU 11.1.1.6 to create the schemas for it.
Question:
Can I use same database(Oracle DB 11g-111170) for the two versions of SOA Suite? that is
Can I Run the RCU 11.1.1.6 to create the schemas for SOA Suite (11.1.1.6) on the oracle database server I already used for SOA Suite 11.1.1.5?
If I can use same database for the two versions of SOA Suite, how can I resolve schame name conflict?

Hi
1. YES. You can absolutely use SAME DB to have multiple Versions of SOA Schemas.
2. Any SOA/BPM will need basically 4/5 schemas like SOAINFRA, MDS, ORABAM, ORASDPM etc. based on what you choose. And each of these Schemas can be Prefixed. Default prefix is like DEV, so schemas are like DEV_SOAINFRA, DEV_MDS etc
3. Very Simple. When you Run RCU 11.6 and give the same old db details, in next screen it will automatically show the new Prefix for the schemas it will create. If DEV is used, it will show DEV1 like that. So just choose a Different Prefix and you are good to go.
I have the same thing on my side. Single Database. Multiple RCU for SOA 11.5 and SOA 11.6 with different Prefixes:
SOA 11.5 -> DEV115_SOAINFRA, DEV115_MDS, DEV115_ORABAM etc
SOA 11.6 -> DEV116_SOAINFRA, DEV116_MDS, DEV116_ORABAM etc
I Used the Prefixes like DEV115, DEV116 so that I know exactly which version of RCU schema they refer to.
For QC, UAT, PROD we used prefixes like QC_*, UAT_*, PROD_* etc.
NOTE: When you drop the schemas for some reason, make sure to give the appropriate prefixes so that only they are dropped and not others.
Thanks
Ravi Jegga

Error using OSR10g with SOA Suite 11g

Hi,
I'm trying to configure a web service adapter in Jdev 11.1.1.2 in order to use the OSR (10g) to dinamically resolve the WSDL location and SOAP endpoint, but I always get an error like this:
Exception: WSDLException: faultCode=PARSER_ERROR: Failed to read wsdl file at: "orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908", caused by: oracle.fabric.common.uddiurl.resolver.exception.SRKeyNotFoundException:
<dispositionReport xmlns="urn:uddi-org:api_v3">
    <result errno="10210">
        <errInfo errCode="E_invalidKeyPassed">Cannot find BusinessService with key orauddi:/uddi:8955c1d0-0b55-11e1-b90e-7b4aa540b908 !</errInfo>
    </result>
</dispositionReport>The service is correctly published in registry, even its reachable from the UDDI Registry Resource Palette in JDEV.
The same service published in a OSR 11g is invoked correctly, but I can't solve the proble for the OSR 10g.
I found some documentation about migrating and it says that the SOA Suite 10g uses UDDI standar but the 11g Suite uses orauddi.... so, not standard??, is there a way to integrate SOA Suite 11g with OSR 10g??

Hi,
check for some spaces or character which might be going while you specify the JRE locations, alternatively you can call runInstaller with
-jreLoc ,i.e;have the path in the cmd.
./runInstaller -jreLoc /root/Oracle/Middleware/jdk160_14_R27.6.5-32
which should work.
regards,
Jitendra

How to install AIA in Oracle SOA Suite 11.1.1.5.0

Hi,
I have installed Oracle SOA Suite 11.1.1.5.0. It works fine . Now I want to install AIA Foundation Pack on this . How to do that ? Which AIA version I need to download ? and what are the steps that I have to follow to make AIA works on it .
Thanks

As per the certification matrix at http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html --> Oracle Fusion Middleware 11g Release 1 (11.1.1.x) -->System Requirements and Supported Platforms for Oracle Fusion Middleware 11gR1 --> Download the xls file --> On sheet FMW on WLS - System you should be able to see AIA FP and SOA certified combinations.
To download the installer goto - http://www.oracle.com/technetwork/middleware/foundation-pack/downloads/index.html --> Release 11gR1 (11.1.1.5.0) --> Select the platform and expand Prerequisites & Recommended Install Process.
You should be able to gather all the required information from here.
Hope it helps!

File/ftp adapters in SOA Suite (BPEL/ESB) 10.1.3.x

Questions below are relative to SOA Suite 10.1.3.3 adapters:
1. In creating a File Read/Write adapter - how can I specify a variable portion of the file name - can XPath expressions be used. I know that in specifing the file name one uses a %---% but want to make the rest of the file name flexible as well.
2. If I am going to use SFTP - how is that done as opposed to simple FTP?
Thanks - Casey

Hi,
wrong forum, try the BPEL forum
Frank

Installing 10g adapters with SOA suite 10.3.1

Similar Messages

Maybe you are looking for