Installing 10g and Grid control together on Windows Server 2003

Hi all,
I've been having some trouble installing both the Grid Control and Oracle 10g together on a Windows Server 2003 box.
Here's the steps I've followed (if im stepping away from the norm, please tell me.. i REALLY need to do this properly without any hacks.. right now im on a test box.. but soon enough I have to do it in a live production environment and I really need a clean install).
I had a copy of Oracle 9i installed - my databases are pretty small.. 1.5Gb at most and I have been advised to just do an export and import them back in later.. which is fine by me..
I uninstalled Oracle 9i, making sure to check all the environment variables were clear and the registry settings were gone.
I ran the grid control setup
Set Home name = Ora10gGC
Set home path = C:\Oracle\Ora10gGC
I selected Enterprise Manager 10g Grid Control Using a New database 10.1.3.0
I set my passwords, and then set the global database name as emrep (the default)
All the optional configuration assistants ran successfull
Once this was all done and the install was finished, I restarted the server
Then I inserted the Oracle 10g cd
I ran 10g setup
Click Advanced installation
Set home name = Ora10g
Set home path = C:\Oracle\Ora10g
I selected Enterprise edition
Selected General purpose database
I got the following message:
The ORACLE_HOME environment variable is current set. This will prevent proper use of Multiple Oracle Homes and since it is not required for any Oracle products to function, it will be unset in your environment.
I set the global database name on my starter database to STARTER, I selected Use Grid Control for Database Management and set my paths and passwords, then I clicked install.
The install worked up till it tried to create the starter database, then it failed with an ORA-12560 error.
I checked the environment variables and it seems that ORACLE_HOME wasn't unset after all. I deleted it from my environment variables and restarted the server, but I still get the ORA-12560 error when i try to create a new database.
I'd really appreciate it if someone could tell me how to install these 2 products together properly.. Thanks!

I suggest you to read Metalink Note:344537.1 "Installing EM 10g Grid Control Fails to Start the TNSListener Due to Environment Settings"
Additionaly could you post the fragment from alert.log and listener.log files, so more diagnostic information can be provided on this issue.
~ Madrid.

Similar Messages

  • HELP on OBIEE and Hyperion BI on same Windows Server 2003 x64 machine

    Hi everyone,
    I am having problems when installing OBIEE 11G and Hyperion BI on the same machine.
    The problem seems to be Weblogic crashing and not being able to have both of these products on the same machine. Only either one will work.
    Details:
    Steps involved:
    1. Install
    Windows Server 2003 x64 SP2
    2. Install
    SQL Server 2005 x64 SP3
    3. Install Hyperion 11.1.2 for 64bit Modules:
    - Foundation
    - EPMA
    - Calculation Manager
    - Essbase
    - Planning
    4. Configure Hyperion Modules using DB SQL Server 2005 x64
    5. Install and Configure using DB SQL Server 2005 x64
    Oracle RCU for 64bit
    6. Install Oracle BI for 64bit and Configure using DB SQL Server 2005 x64
    Result:
    Fails to start services for either Hyperion Products or Oracle BI.
    Anyone can provide correct steps?

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

    Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
    Dear Gurus Please help me

    You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
    See:
    For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
    For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
    Regards,
    Ronald

  • Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

    We have a report package that generates customised reports
    We generate the PDF's by simply "printing" to the Adobe PDF printer
    In Windows XP Pro (32 Bit) the report creates the PDF perfectly
    In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
    Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
    With thanks
    Mark

    I think it will work fine if you use the "Enterprise" authentication option.  It may have dependencies on 32 bit components.  So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS.  That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels.  I'm not sure if that is considered "full support". 
    We are trying to use the LDAP authentication option, but that tab is disabled.  Other tabs such as Active Directory and WinNT are disabled as well.  There maybe another component that we must bring down to 32 bit processing.
    Is there a way to enable the LDAP authentication configuration tab?
    thanks

  • Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

    Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
    Error message:
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
    Failed <<<<
    Is there a workaround or a version that will install on 2008 x64?
    Thanks.

    This will give you the complete picture of Grid Certification.
    Oracle Enterprise Manager 10g Grid Control Certification Checker
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
    Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
    10.2.0.4 Agent is certified with 2008 64 bit.

  • Error while installing 10g EM Grid Control on Windows 2003

    Hi Experts,
    I am facing following error while installing EM Grid Control, please help me find solution:
    Here are the installation error found in the log file:
    INFO: oracle.sysman.top.oms:Start Opmn Error = CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:CMD /C C:\OracleHomes\oms10g\opmn\bin\opmnctl startall have completed with exitCode=206
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
    'opmnctl: starting opmn and all managed processes...
    INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
    '================================================================================
    opmn id=emgc:6201
    5 of 6 processes started.
    ias-instance id=EnterpriseManager0.emgc
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=1416)
    failed to start a managed process after the maximum retry limit
    Log:
    C:\OracleHomes\oms10g\opmn\logs\HTTP_Server~1
    INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 5 have been completed with status=false
    INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
    INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
    INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=C:\OracleHomes\oms10g:label=0}
    INFO: Framework waiting for Action to complete at 11:45:05.168
    INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
    INFO: OuiConfigVariables:About to execute plug-in OUI_CA
    INFO: OuiConfigVariables:The plug-in OUI_CA is running
    INFO: OuiConfigVariables:Launching CmdExec
    INFO: OuiConfigVariables:ExitCode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
    INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
    INFO: done waiting for Action from 11:45:05.168
    INFO: Cfm.save() was called
    INFO: Cfm.save(): 21 aggregate instances saved
    Any help or direction will be highly appreciated.
    Regards,
    MS

    i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
    the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
    where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
    error reads :
    -error cheching the existence of the SYSMAN user in Management repository
    -exception occured while connecting to database . please check the connection details you specified and retry
    -io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    REP DB HOSTNAME:SA-OMS-01
    PORT:1521
    SERVICE/SID:OMSDB01
    SYSMAN PASSWORD:PASS
    THE REST I PUT PASS AS PASSWORD
    NOT SURE WHAT TO DO NEXT.

  • Two instances can not simlutaneouly work together on Windows Server 2003 R2

    Hi Gurus,
    I installed Netweaver on a server which is already having ECC 6.0 which we are using on insctance 10 but i can work only one at a time if one is Up and running the other one should be down this is what am facing.
    I have the developer trace log file. Pleaase see below and help me with this.Log below is for Netweaver that i installed and if ECC is UP it throws this in trace.
    Total Physical Memory of server = 32 GB
    Available Physical Memory of server = 11 GB
    In task Manager it shows PF usage of 73 GB and total paging file size set for all drives is 44.98 GB.
    LOG
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      20
    sid        NWC
    systemid   562 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    144
    intno      20050900
    make:      multithreaded, Unicode, 64 bit, optimized
    pid        13772
    Wed Mar 04 16:06:10 2009
    kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
    length of sys_adm_ext is 576 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (20 13772) [dpxxdisp.c   1243]
         shared lib "dw_xml.dll" version 144 successfully loaded
         shared lib "dw_xtc.dll" version 144 successfully loaded
         shared lib "dw_stl.dll" version 144 successfully loaded
         shared lib "dw_gui.dll" version 144 successfully loaded
         shared lib "dw_mdm.dll" version 144 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3920
    Wed Mar 04 16:06:15 2009
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5371]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >specsaptm_NWC_20                        <
    DpShMCreate: sizeof(wp_adm)          25168     (1480)
    DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    DpShMCreate: sizeof(comm_adm)          552080     (1088)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (104)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1864)
    DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 000000000CD60050, size: 6348592)
    DpShMCreate: allocated sys_adm at 000000000CD60050
    DpShMCreate: allocated wp_adm at 000000000CD62150
    DpShMCreate: allocated tm_adm_list at 000000000CD683A0
    DpShMCreate: allocated tm_adm at 000000000CD68400
    DpShMCreate: allocated wp_ca_adm at 000000000D2CC2A0
    DpShMCreate: allocated appc_ca_adm at 000000000D2D2060
    DpShMCreate: allocated comm_adm at 000000000D2D3FA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000D35AC30
    DpShMCreate: allocated gw_adm at 000000000D35ACB0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 000000000D35ACE0
    DpShMCreate: allocated wall_adm at 000000000D35ACF0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    ERROR => <EsNT> CreateFileMapping name=ES_SEG_20_001 error=1455 [esnti.c      1184]
    ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c      1186]
    Memory diagnostic                                 *
    Systeminformation
    Processor-Typ             : Processor-Count           : 16
    Operating System          : NT 5.2, Build 3790
    Service Pack              : Service Pack 1
    NT Pagefile Informations
    Config. minimum size      : 47185920 K
    Config. maximum size      : 47185920 K
    Avail.  maximum size      : 47185920 K
    Num
    Pagefile
    Min.Size
    Max.Size
    Avail.Max
    Curr.Size
    1
    c:\pagefile.sys
    20971520 K
    20971520 K
    20971520 K
    20955136 K
    2
    o:\pagefile.sys
    15728640 K
    15728640 K
    15728640 K
    15728640 K
    3
    s:\pagefile.sys
    10485760 K
    10485760 K
    10485760 K
    10485760 K
    NT Task Manager Informations
    Total Handles             :        0
    Total Threads             :        0
    Total Processes           : 2027253931
    Commit Charge Total       :        0 K
    Commit Charge Limit       : 2143554319 K
    Commit Charge Peak        :     2047 K
    Phys.Memory Total         : 131657184 K
    Phys.Memory Available     :        0 K
    File Cache                : 2143594271 K
    Kernel Memory Total       :     2047 K
    Kernel Memory Paged       :   393225 K
    Kernel Memory Nonpaged    :     3851 K
    Memory usage of current process
    Total virt.address space  : 0000008589934464 K
    Avail.virt.address space  : 0000008589043192 K
    Private Pages             :        0 K
    Total heap size           :    26229 K
    Virtual memory regions    :        0 K
    Uncommitted heap memory   :    16392 K
    Allocated heap memory     :     8196 K
    Moveable heap memory      :     2202 K
    DDE shared heap memory    :        0 K
    Memory usage of all processes
    PID
    Image
    Instance
    Work.Set
    WS Peak
    Priv.Pages
    PP Peak
    Pg Fault
    17072
    sapstartsrv.exe
    21452 K
    21848 K
    23768 K
    23888 K
    85
    11308
    msg_server.EXE
    [MS] NWC_21
    10624 K
    10624 K
    13984 K
    13984 K
    2
    11712
    enserver.EXE
    [**] NWC_21
    16476 K
    16476 K
    58040 K
    58040 K
    4
    7116
    msg_server.EXE
    [MS] NWC_20
    10960 K
    10960 K
    14432 K
    14436 K
    2
    13772
    disp+work.EXE
    43272 K
    43648 K
    75636 K
    82264 K
    11
    17560
    igswd.EXE
    [**] NWC_20
    4108 K
    4408 K
    3208 K
    3572 K
    1
    7072
    igsmux.exe
    14308 K
    14308 K
    18036 K
    18072 K
    3
    16988
    igspw.exe
    3544 K
    3544 K
    4012 K
    4012 K
    0
    5504
    igspw.exe
    3544 K
    3544 K
    4012 K
    4012 K
    0
    Sum
    128288 K
    215128 K
    Error 11 while initializing OS dependent part.
    ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   9634]
    ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   9561]
    DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Mar 04 16:06:26 2009
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Mar 04 10:36:26 2009
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    0 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    1 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    2 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    3 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    4 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    5 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    6 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    7 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    8 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    9 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    10 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    11 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    12 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    13 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    14 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    15 ?         -1 Free          no      0   0        0                                                                         
    ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
    16 ?         -1 Free          no      0   0        0                                                                         
    Dispatcher Queue Statistics               Wed Mar 04 10:36:26 2009
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    0
    2000
    0
    0
    --------++++--
    +
    DIA
    0
    0
    2000
    0
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          0
    wake_evt_udp_now     0
    wake events           total     0,  udp     0 (  0%),  shm     0 (  0%)
    since last update     total     0,  udp     0 (  0%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Mar 04 10:36:26 2009
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Mar 04 10:36:26 2009
    =============================
    Slots: 300, Used: 0, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL

    If you installed the system with default memory parameters both instances will try to allocate 1/2 of the virtual memory on startup.
    I suggest you decrease the parameter
    es/initial_size_MB
    to a value that both instances will fit into physical memory (so e. g. 4000). Then try to start both instances.
    Markus

  • How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?

    I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
    Now, when I deploy my application to the Server, it raises error:
    Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
    Obviously I need to install ODAC on the server, too. My server is:
    - Windows 2003 32 bit R2 (I know, I know!)
    - IIS 6
    So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
    PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
    Edited by: 1000434 on Apr 17, 2013 6:35 AM
    Edited by: 1000434 on Apr 17, 2013 6:36 AM

    ODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
    What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
    You can learn more about DllPath here:
    http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
    If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
    http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106

  • 10G Net Configuration assistant failed in windows Server 2003

    Hi,
    When i try to install Oracle 10g It is installing, But Net Conf Assist Failed stating that there are multiple Oracle Homes.
    Pl advice
    Cheers

    There is a seperate forum for Installation related questions.
    Database Installation

  • Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS

    Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
    Cannot I set up Windows server 2012 R2 as primary DC and DNS  , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)

    You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
    http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • RC-50004: Fatal: Error occurred in ApplyAppsTechStack: While Installatling EBS R12 on window server 2003 SP2

    Hi Mr.Hussain,
    Can you please guide me how to solve this error,
    i am trying to install oracle EBS  R12.1.1 on windows server 2003, i am following your document, installation of EBS R12.1 in windows server 2003 SP2
    i did stage everything going right, even i did md5sums for the extracted file of EBS R12 folder.
    i stated installation, even installation done perfectly at the end of installation 2 Command Prompt windows appear and stopped, i try to open log file from oracle installation folder, i got this message at the end of log file
        3% completed       RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
    RC-50013: Fatal: Failed to instantiate driver c:\oracle\PROD\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
    Cannot execute registration of Applications Techstack
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
        RW-50010: Error: - script has returned an error:   1
    RW-50004: Error code received when running external process.  Check log file for details.
    Running APPL_TOP Install Driver for PROD instance
    can you please guide me how to solve this error,

    This is a generic error so you would need to check the installation log files for details about the error.
    Please see if (Rapidwiz 12.1.1 Fails To Execute Ouicli.Pl During Apps 10.1.3 Techstack Autoconfig (Doc ID 1328464.1)) is applicable.
    Thanks,
    Hussein

  • ERROR FRM-41211 Windows server 2003 64 bits

    I install Forms&Reports 6i patch 17 on windows server 2003 64 bits an i get all times FRM-41211. The report background service is open but i don't see anything in the log.
    I test the call to the report with RUN_PRODUCT and RUN_REPORT_OBJECT and the result is the same.
    Anybody can help me?

    Post Author: ME-DSZ
    CA Forum: Deployment
    Until yet BO doesn't support x64
    http://technicalsupport.businessobjects.com/cs/forums/thread/12284.aspx
    I found in Google following:
    http://diamond.businessobjects.com/node/18657
    http://www.thedatafarm.com/blog/2008/03/18/CrystalREports2008ServicePackProvidesIntegrationWithVS2008.aspx
    Is this correct. Does "Crystal Reports 2008 Service Pack 0" supports (Full) x64 systems??? But i suppose that it will not work in IIS 7.0 on Windows Server 2008 x64!?
    I'm actual works on moving all my reports to Reporting Services, because BO gives no information about the support for x64 Systems. They say, that SP 1 of CR 2008 could support x64. But how long do loyalty customers wait for this? I do wait enough...
    Greetz

  • Steps to Install SAP R3 IDES 4.7 on Win Server 2003 R2

    Hi everyone...
    I need your help to install SAP R3 Ides 4.7 on Windows Server 2003 R2...
    In this moment, i got this:
    DVD SAP R3E 47 SR1 EXPORT 1 TO 16
    CD 6.40 Kernel ORACLE A,L,NT,NTIA64
    GUI 7.10
    SAP NW04 SR1 IGS
    Installation Master 6.206.40 Windows Server on IA32 32bit
    and Oracle (Oracle 9.2 NT 1 to 3, Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT  oracle patch cd)
    Firstly, i had to partition my HD in two parts: drive C (65Gb) and drive D(85 Gb), then i configured a Network Loopback and assign an ip (192.100.10.1), then i copied all the package mentioned above in Drive D (85Gb).
    after that, i assign the Java paths in Environment Variables.
    **I have a cuestion here.... When i gonna install Oracle 9.2NT 1 to 3, ask a location where i wish to install the Oracle software; i pick the Drive D(85Gb) for this... Is this correct or not? --- i always choose drive D for Oracle and SAP.
    When i install Oracle, the next step is - - - Install Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT  oracle patch cd or this is gonna be installed after SAP R3?
    In which order i should to install this package:
    DVD SAP R3E 47 SR1 EXPORT 1 TO 16
    CD 6.40 Kernel ORACLE A,L,NT,NTIA64
    GUI 7.10
    SAP NW04 SR1 IGS
    Installation Master 6.206.40 Windows Server on IA32 32bit
    and Oracle (Oracle 9.2 NT 1 to 3, Oracle 9.2 Patch Set 7 WIN I386 and Oracle 9.2.0.4.1 NT  oracle patch cd)
    Please.. somebody help me with this
    Best Regards
    Santos...

    HI everyone,
    an error appear again!!!
    During the DB Instance i get an error in the log file
    as "already seems to exist a previous run may not have been finished cleanly and possibly corrupted"
    The files are :SAPAPPL1.TSK, SAPAPPL2.TSK and SAPSSEXC.TSK
    ERROR 2008-01-19 18:11:16
    MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPSSEXC.log
    ERROR 2008-01-19 18:11:16
    MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.log
    ERROR 2008-01-19 18:11:46
    MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL2.log
    Cheking the logs of each files that appear with error, show the following message:
    (TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
    a previous run may not have been finished cleanly
    file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK possibly corrupted
    (TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
    a previous run may not have been finished cleanly
    file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL2.TSK possibly corrupted
    (TSK) ERROR: file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPAPPL1.TSK.bck already seems to exist
    a previous run may not have been finished cleanly
    file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB/SAPSSEXC.TSK possibly corrupted
    Can anyone please help me?
    i will appreciate so much!!!
    Best Regards
    Alex

  • Why the RSC can not found my JRE1.6.0.06 on windows server 2003 ?

    I installed the SUN RSC program on my windows server 2003, It required JRE 1,3 or later,then I installed the JRE.16.0.06, I set the JAVA_HOME and CLASSPATH,I can got correct information with java -version commend on cmd,but the RSC still told me that it required JRE 1.3 or later.
    Why ?

    We run our Sun V480s and E250 (Solaris 10) headless, and depend on RSC (both CLI and GUI) to access the consoles from Windows.XP desktop machines.
    We have been using the RSC GUI from the Wintel boxes quite successfully for several years, and appreciate having the RSC devices in our Sun servers. We rely on Sun's RSC software.
    Several days ago we installed the current Sun JRE (1.6.0.06) on the Windows machines. RSC GUI now fails to run on the Windows machines, displaying a message box advising that Java 1.3, or later, is required and directing us to download 1.3 or later.
    Since 1.6 is later than 1.3, it would appear that Sun's current JRE broke the existing Sun RSC GUI app.
    How could Sun do this? WIll they release a fix?
    We will try to open a Service Request, but are having difficulty due to Sun's problems implementing the new Support Contract arrangements, and it is not clear that we can access our support at this time. Sun has physically visited our facility, and given us absolute assurance that they will continue our existing contract for the duration of their difficulties, while simultaneously lapsing our contract when we attempt to access it online. Consequently, we cannot immediately get contractual assistance on this matter, through the normal support channel.
    Thank you.
    DG
    Edited by: david_grove on Jun 4, 2008 5:53 PM

  • Upgrading windows server 2003 domain controller to windows server 2008

    Hello friedns :
    We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
    ( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
    If there is a guide available for it please let me know . (Specially if there is a tip & trick)
    thank you guys.
    Network is my LOVE

    Hi,
    This TechNet online article might be helpful for you.
    How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
    http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
    For your convenience, I have list some general steps for your reference.
    Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
    General Steps:
    =============
    1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
    2. Make the new server become a member server of the current Windows Server 2003 domain first.
    3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
    Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP\adprep.exe /forestprep
    4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
    Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP \adprep.exe /domainprep
    5. Insert Windows Server 2008 Installation Disc in the new server.
    6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
    Please refer to:
    How to Verify an Active Directory Installation in Windows Server 2003
    http://support.microsoft.com/kb/816106
    7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
    8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
    Please note: It will some time to replicate GC between DC, please wait some time with patience.
    9. Disable Global Catalog on the old DC.
    10. Transfer all the FSMO roles from the old DC to the new DC.
    Please refer to:
    How to view and transfer FSMO roles in Windows Server 2003
    http://support.microsoft.com/kb/324801
    11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
    How To: Convert DNS Primary Server to Active Directory Integrated
    http://support.microsoft.com/kb/816101
    Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
    12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
    13. Make all the clients change TCP/IP configuration to point to new server as DNS.
    14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
    Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
    Hope it helps.
    Regards,
    Wilson Jia
    This posting is provided "AS IS" with no warranties, and confers no rights.

Maybe you are looking for

  • Mapping problem: IDOC - XI - File

    Hi, in my scenario (Z-IDOC - XI - File) I have problems with the mapping: Z-IDOC : ZFIBUCH1 _IDOC ___Begin ___EDI_DC40 ___Z1L061 (0..999999999) _____Z1L062 (0..999999999) example L061 18000 DE 0101 23236318 050605 EUR __L062 18000 XXX XXX __L062 1800

  • Adobe photoshop cs5 stroke problems

    Dear Adobe Team, We are using adobe Photoshop CS5 in our HP Workstation machine, but since we changed our OS in windows 7 we are facing stroke problems. Like whenever we draw a straight stroke than it does not go straight it becomes curve type. Pleas

  • Installtion of Informatic Power Center 9.0.1 in Solaris Sprac 64 Bit

    I want to know how to configure and which file required for Informatic Power Center 9.0.1 in Solaris Sprac 64 Bit setup. Please help to how configure server and client in solaris sprac .

  • Using Roxio Media Manager in standalone mode

    I have installed Media Manager with RIM's Desktop Manager, but I only have use for Roxio Media Manager. Is there's a way to just install Media Manager ? Alternatively is it possible to launch Media Manager individually without having to go through th

  • Overtime Amount not to be added as Basic

    Hi All,      Here, at our client, an Infotype is created for Overtime and the amount is paid through IT 0015. While calculating the 'Tax Exemption on HRA' the basic amount is taken as Basic + OT  ( /114 + Approved OT Amount).  But as per the scenario