Installing 10g RAC on laptop
Hi,
Has anybody got a note or a good link of how-to for the installation of 10g RAC on laptop using redhat or suse?
Please provide it as I am looking to start my hands on RAC.
Thanks
Here:
http://www.oracle.com/pls/db102/portal.portal_db?selected=16
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
Similar Messages
-
De-installing 10g RAC on Solaris 10
Hi,
Does anyone knows how to manually de-installing 10g rac on solairs 10?
I did not following the correct steps to de-install RAC from the RAC installation Guide.
I need to reuse this host for non-rac 10gr2 on different ORACLE_HOME.
./localconfig reset $ORACLE_HOME
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
cat ./log/wchost/alertwchost.log
[client(9029)]CRS-1006:The OCR location /oracle/product/10.2.0/cdata/localhost/local.ocr is inaccessible. Details in /oracle/product/10.2.0/log/wchost/client/clscfg_9029.log.
Thanks!
RMetalink Note 239998.1 tells you how to tidy things up after installation and deinstallation problems
-
Configring and instaling 10g RAC on two Nods win 2003 Local Area
All Experts
I want to configure and instal 10g RAC using three database server on difirent network groups (Head office , processing, stitching). i am unable to configure ip etc. ip address is as:
work group ip address computer name
HO 192.168.0.29 maindb
processing 192.168.1.92 procdb
stitching 192.168.1.92 stichdb
Please guide how i can configure and user hosts file in windows\system32\drivers\etc\hosts
Thanks in advanceThanks
i have three server with same subnet mask. save os and db versiong windows server 2003 and 10g on all servers.
server-1
ip address : 192.168.0.29
ubnet mask : 255.255.254.0
computer name : maindb
server-2
ip address : 192.168.0.92
ubnet mask : 255.255.254.0
computer name : procdb
server-3
ip address : 192.168.0.93
ubnet mask : 255.255.254.0
computer name : stitchdb
Please guide me how i can configure system32\dirvers\etc\hosts file.
Thanks in advance. -
Install 10g RAC on solaris10(x86) in VMware,but failed on crs's root.sh
VMware server 1.0.4 build-56528
bash-3.00# uname -a
SunOS rac02 5.10 Generic_118855-33 i86pc i386 i86pc
disk information:
format->partition->print,this is the result
Current partition table (original):
Total disk cylinders available: 3580 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 usr wm 3 - 5 6.00MB (3/0/0) 12288
1 usr wm 76 - 95 40.00MB (20/0/0) 81920
2 backup wu 0 - 3579 6.99GB (3580/0/0) 14663680
3 usr wm 96 - 2000 3.72GB (1905/0/0) 7802880
4 usr wm 2001 - 3579 3.08GB (1579/0/0) 6467584
5 usr wm 6 - 75 140.00MB (70/0/0) 286720
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0
8 boot wu 0 - 0 2.00MB (1/0/0) 4096
9 unassigned wm 0 0 (0/0/0) 0
i want to save ocr and voting on raw partition,ocr on 5(140m) and vot on 1(40m)
then,i do as this,
bash-3.00# ln -s /dev/rdsk/c2t0d0s5 /orac/ora_ocr
bash-3.00# ln -s /dev/rdsk/c2t0d0s1 /orac/ora_vot
bash-3.00# chown -RL root:oinstall /orac/ora_ocr
bash-3.00# chown -RL oracle:oinstall /orac/ora_vot
bash-3.00# chmod 777 /orac/ora_ocr
bash-3.00# chmod 777 /orac/ora_vot
this is the error message:
bash-3.00# /orac/crs/product/10.2.0/root.sh
WARNING: directory '/orac/crs/product' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/orac/crs/product' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac01 node1 rac01
node 2: rac02 node2 rac02
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /orac/ora_vot
CLSFMT returned with error [4].
Failed to initialize Oracle Cluster Registry for cluster
0
What is wrong?
I have other questions,
A.Before install CRS,do i need some packages?SUNWarc SUNWbtool SUNWhea SUNWlibm SUNWlibms SUNWsprot SUNWtoo SUNWi1of SUNWi1cs SUNWi15cs SUNWxwfnt,install guide told me these packages is necessary,but someone told me it wrote for solaris 9
B.How can i use the raw device?
C.Do i need the sun cluster?These machines are in vmware server,and I use "vmware-vdiskmanager -c -s 250Mb -a lsilogic -t 2 "D:\10gRAC\votedisk.vmdk"" to create the shared storage.
-thanks -
Installing 10g rac on Solaris 64-bit Sparc
I ran my preinstallation cluvufy
using ./cluvfy stage -pre crsinst -n racnode3,racnode4 -verbose -r 10gR2
I get failed errors at
1) Node connectivity failed
2) SUNWi15cs and SUNWi1cs- missing
3) Clock synchronization check using Network Time Protocol(NTP) failed
I am so lost as to figure out whats happening. have beenn working on it for two weeks now. Here is the log
Any help would be greatly appreciated
Thanks
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "racnode3"
Destination Node Reachable?
racnode3 yes
racnode4 yes
Result: Node reachability check passed from node "racnode3"
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
racnode4 passed
racnode3 passed
Result: User equivalence check passed for user "oracle"
Version of exectask could not be retrieved from node "racnode3"
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
racnode4 passed
Verification of the hosts config file successful
Interface information for node "racnode4"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
vnet0 10.23.11.127 10.23.11.0 10.23.11.127 10.23.11.1 00:14:4F:FB:A4:A5 1500
vnet1 192.168.2.127 192.168.0.0 192.168.2.127 10.23.11.1 00:14:4F:F8:5A:A3 9216
Check: Node connectivity of subnet "10.23.11.0"
Result: Node connectivity passed for subnet "10.23.11.0" with node(s) racnode4
Check: TCP connectivity of subnet "10.23.11.0"
Source Destination Connected?
racnode3:10.23.11.126 racnode4:10.23.11.127 failed
ERROR:
PRVF-7617 : Node connectivity between "racnode3 : 10.23.11.126" and "racnode4 : 10.23.11.127" failed
Result: TCP connectivity check failed for subnet "10.23.11.0"
Check: Node connectivity of subnet "192.168.0.0"
Result: Node connectivity passed for subnet "192.168.0.0" with node(s) racnode4
Check: TCP connectivity of subnet "192.168.0.0"
Source Destination Connected?
racnode3:10.23.11.126 racnode4:192.168.2.127 failed
ERROR:
PRVF-7617 : Node connectivity between "racnode3 : 10.23.11.126" and "racnode4 : 192.168.2.127" failed
Result: TCP connectivity check failed for subnet "192.168.0.0"
Interfaces found on subnet "10.23.11.0" that are likely candidates for VIP are:
racnode4 vnet0:10.23.11.127
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Result: Node connectivity check failed
Check: Total memory
Node Name Available Required Comment
racnode4 5.75GB (6029312.0KB) 1GB (1048576.0KB) passed
Result: Total memory check passed
Check: Swap space
Node Name Available Required Comment
racnode4 8GB (8388600.0KB) 5.75GB (6029312.0KB) passed
Result: Swap space check passed
Check: Free disk space for "racnode4:/var/tmp/"
Path Node Name Mount point Available Required Comment
/var/tmp/ racnode4 / 11.8299GB 400MB passed
Result: Free disk space check passed for "racnode4:/var/tmp/"
Check: User existence for "oracle"
Node Name Status Comment
racnode4 exists(200) passed
Checking for multiple users with UID value 200
Result: Check for multiple users with UID value 200 passed
Result: User existence check passed for "oracle"
Check: User existence for "nobody"
Node Name Status Comment
racnode4 exists(60001) passed
Checking for multiple users with UID value 60001
Result: Check for multiple users with UID value 60001 passed
Result: User existence check passed for "nobody"
Check: Group existence for "oinstall"
Node Name Status Comment
racnode4 exists passed
Result: Group existence check passed for "oinstall"
Check: Group existence for "dba"
Node Name Status Comment
racnode4 exists passed
Result: Group existence check passed for "dba"
Check: Membership of user "oracle" in group "oinstall" [as Primary]
Node Name User Exists Group Exists User in Group Primary Comment
racnode4 yes yes yes yes passed
Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
Check: Membership of user "oracle" in group "dba"
Node Name User Exists Group Exists User in Group Comment
racnode4 yes yes yes passed
Result: Membership check for user "oracle" in group "dba" passed
Check: Run level
Node Name run level Required Comment
racnode4 3 3 passed
Result: Run level check passed
Check: Hard limits for "maximum open file descriptors"
Node Name Type Available Required Comment
racnode4 hard 65536 65536 passed
Result: Hard limits check passed for "maximum open file descriptors"
Check: Soft limits for "maximum open file descriptors"
Node Name Type Available Required Comment
racnode4 soft 1024 1024 passed
Result: Soft limits check passed for "maximum open file descriptors"
Check: Hard limits for "maximum user processes"
Node Name Type Available Required Comment
racnode4 hard 16384 16384 passed
Result: Hard limits check passed for "maximum user processes"
Check: Soft limits for "maximum user processes"
Node Name Type Available Required Comment
racnode4 soft 16384 2047 passed
Result: Soft limits check passed for "maximum user processes"
Check: System architecture
Node Name Available Required Comment
racnode4 64-bit sparcv9 kernel modules 64-bit sparcv9 kernel modules passed
Result: System architecture check passed
Check: Kernel version
Node Name Available Required Comment
racnode4 5.10-2011.08.23.15.26 5.10-2005.01 passed
Result: Kernel version check passed
Check: Kernel parameter for "project.max-sem-ids"
Node Name Configured Required Comment
racnode4 128 100 passed
Result: Kernel parameter check passed for "project.max-sem-ids"
Check: Kernel parameter for "process.max-sem-nsems"
Node Name Configured Required Comment
racnode4 512 256 passed
Result: Kernel parameter check passed for "process.max-sem-nsems"
Check: Kernel parameter for "project.max-shm-memory"
Node Name Configured Required Comment
racnode4 4294967296 4294967295 passed
Result: Kernel parameter check passed for "project.max-shm-memory"
Check: Kernel parameter for "project.max-shm-ids"
Node Name Configured Required Comment
racnode4 128 100 passed
Result: Kernel parameter check passed for "project.max-shm-ids"
Check: Package existence for "SUNWarc-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWarc-11.10.0-2005.01.21.15.53 SUNWarc-...( sparc) passed
Result: Package existence check passed for "SUNWarc-...( sparc)"
Check: Package existence for "SUNWbtool-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWbtool-11.10.0-2005.01.21.15.53 SUNWbtool-...( sparc) passed
Result: Package existence check passed for "SUNWbtool-...( sparc)"
Check: Package existence for "SUNWhea-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWhea-11.10.0-2005.01.21.15.53 SUNWhea-...( sparc) passed
Result: Package existence check passed for "SUNWhea-...( sparc)"
Check: Package existence for "SUNWlibC-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWlibC-5.10-2004.12.22 SUNWlibC-...( sparc) passed
Result: Package existence check passed for "SUNWlibC-...( sparc)"
Check: Package existence for "SUNWlibm-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWlibm-5.10-2004.12.18 SUNWlibm-...( sparc) passed
Result: Package existence check passed for "SUNWlibm-...( sparc)"
Check: Package existence for "SUNWlibms-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWlibms-5.10-2004.11.23 SUNWlibms-...( sparc) passed
Result: Package existence check passed for "SUNWlibms-...( sparc)"
Check: Package existence for "SUNWsprot-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWsprot-5.10-2004.11.23 SUNWsprot-...( sparc) passed
Result: Package existence check passed for "SUNWsprot-...( sparc)"
Check: Package existence for "SUNWtoo-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWtoo-11.10.0-2005.01.21.15.53 SUNWtoo-...( sparc) passed
Result: Package existence check passed for "SUNWtoo-...( sparc)"
Check: Package existence for "SUNWi1of-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWi1of-6.6.2.7400-0.2004.12.15 SUNWi1of-...( sparc) passed
Result: Package existence check passed for "SUNWi1of-...( sparc)"
Check: Package existence for "SUNWi1cs-...( sparc)"
Node Name Available Required Comment
racnode4 missing SUNWi1cs-...( sparc) failed
Result: Package existence check failed for "SUNWi1cs-...( sparc)"
Check: Package existence for "SUNWi15cs-...( sparc)"
Node Name Available Required Comment
racnode4 missing SUNWi15cs-...( sparc) failed
Result: Package existence check failed for "SUNWi15cs-...( sparc)"
Check: Package existence for "SUNWxwfnt-...( sparc)"
Node Name Available Required Comment
racnode4 SUNWxwfnt-6.6.2.7400-0.2004.12.15 SUNWxwfnt-...( sparc) passed
Result: Package existence check passed for "SUNWxwfnt-...( sparc)"
Checking for multiple users with UID value 0
Result: Check for multiple users with UID value 0 passed
Check: Current group ID
ERROR:
PRVF-5502 : Current group ID check cannot be performed
Result: Current group ID check failed
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/inet/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "xntpd"
Node Name Running?
racnode4 yes
Result: Liveness check passed for "xntpd"
Check for NTP daemon or service alive passed on all nodes
Checking NTP daemon command line for slewing option "'slewalways yes' & 'disable pll'"
Check: NTP daemon command line
Node Name Slewing Option Set?
racnode4 no
Result:
NTP daemon slewing option check failed on some nodes
PRVF-5436 : The NTP daemon running on one or more nodes lacks the slewing option "'slewalways yes' & 'disable pll'"
Result: Clock synchronization check using Network Time Protocol(NTP) failed
Checking Core file name pattern consistency...
Core file name pattern consistency check passed.
Checking to make sure user "oracle" is not in "root" group
Node Name Status Comment
racnode4 does not exist passed
Result: User "oracle" is not part of "root" group. Check passed
Check default user file creation mask
Node Name Available Required Comment
racnode4 0022 0022 passed
Result: Default user file creation mask check passed
Checking consistency of file "/etc/resolv.conf" across nodes
Checking the file "/etc/resolv.conf" to make sure only one of domain and search entries is defined
File "/etc/resolv.conf" does not have both domain and search entries defined
Checking if domain entry in file "/etc/resolv.conf" is consistent across the nodes...
domain entry in file "/etc/resolv.conf" is consistent across nodes
Checking if search entry in file "/etc/resolv.conf" is consistent across the nodes...
search entry in file "/etc/resolv.conf" is consistent across nodes
Checking file "/etc/resolv.conf" to make sure that only one search entry is defined
All nodes have one search entry defined in file "/etc/resolv.conf"
Checking DNS response time for an unreachable node
Node Name Status
racnode4 passed
The DNS response time for an unreachable node is within acceptable limit on all nodes
File "/etc/resolv.conf" is consistent across nodes
Check: Time zone consistency
Result: Time zone consistency check passed
Pre-check for cluster services setup was unsuccessful on all the nodes.
Edited by: Aj05 on Feb 2, 2012 8:26 AMDaniel,
Again ... my initial response was that I was insulted by the implications: Still am.
Perhaps you are hoping someone else will steal that copywrited material and send it to you? Is that what you are asking?I think your initial response is little bit excessive (IMO). OP didn't say that "Somebody steal the content from metalink and send it to me please". He might requesting specific note id for appropriate document which describes installation in "instant" form.
But do you really think, for even one minute, that anyone who has invested many hundreds of hours into creating a training class is going to send you their materials for free?Somebody called "Linus" and many others invested many hundreds of hours to create OS which you are using for free (and you are recommending it in your posts)... ;-)
What if there is some altruist which could provide the such complex paper for RAC?
Your third post is correct and I absolutely agree with you (except last sentence).
Salman,
you can look to get inspired at "DBA" articles on OTN website (http://www.oracle.com/technology/pub/articles/tech_dba.html#linux) or RAC SIG site and compare it with official documentation or metalink notes. Only documentation and metalink notes are 100% assurance that your installation/configuration will be supported. And in case of doubts you still can contact Oracle support and consult planned steps/implementation.
Message was edited by:
Ivan Kartik
s/second post/third post/ -
Hi Folks,
i tried to install 10g RAC on VMWare 4.5.2 for testing.
Hostsystem is XP, ghost system are RedHat-ES-30.
I configured tho 2 nodes with 2 scsi adapters and 2 Network Card and a shared Disk.
I installed ocfs 1.0.12 on both nodes, formated the disk and it seems to be fine.
On the next step ( Installation of CRS ) the runInstaller fails after the node configuration screen with the message:
Oracle Cluster Registry File can only be saved on a shared filesystem file or on a RAW Device.
Any Ideas ?
Thanks
MartinHi Laurent,
Thanks for your reply.
I checked that and i can't find the Processes or any think else witch is discribed in thr article !
The Installer pops a message during the creation of the ocr file.
Have any body tried it with RAW Devices ?
Martin -
10g RAC - should I use RAW, OCFS and/or ASM ?
I am about to install 10G RAC on RHAS3. Options for sharing disk partitions are raw, OCFS and ASM. The OCR and voting files must be raw or OCFS, I would tend to go for OCFS in this case. For the Oracle datafiles, again, I would tend to go for OCFS simply for ease of management since ASM seems to add another layer of complexity, and raw lacks flexibility. OCFS however is also new technology and may still have some stability issues. I'm not yet sure of our disk configuration, but there will be HBA cards in each machine with one or two SAN partitions, so I don't expect some of the ASM features such as mirroring etc. will be required as this will be done in the hardware. Does anyone have any recommendations or experiences(good or bad) in which way to go ?
PhilipWe're using raw partitions for some years now, (since oracle 8i, then 9i and now 10g). It is quite flexible, but you shouldn't use physical partitions but LVM. It's very stable.
Now on 10g we're using ASM on some sites where mirroring is needed. It works, but not so stable as raw. we discover some bugs as well.
We've never used OCFS. I don't like it. To much limits. I belive that special utilities are needed for managing files. I don't like linux system software produced by oracle. -
10G RAC on AIX without ASM & HACMP.
Hi,
I want to install ORACLE 10G RAC on AIX but I dont want ot use ASM or HACMP/GPFC.
Just want to install with CRS and RAW devices.Is it possible to install 10g RAC with CRS and RAW devices.
What is the best approach for this.
Regards
MMUWe're running CRS on AIX. No ASM or HACMP.
We do have the db datafiles on GPFS. We've also got one voting disk on GPFS and two on raw devices. -
CRS-0210: Could not find resource while start ASM on 10G RAC
Dear All
I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
ORA-03113: end-of-file on communication channel
select value from v$parameter where name='instance_type'
ERROR at line 1:
ORA-01034: ORACLE not available
This seems to be due to a failure CRS. The trace file shows:
[Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
[Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
Executing
/u01/app/oracle/product/10.2.0/crs/bin/crs_stat
produces:
NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
Many thanks
PaulIt all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
-Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
If the above does not work
-Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
Always a good practise to take a backup of status quo before you restore from the backups.
It would be interesting to know what lead to your disk mapping problem in the first palce.
Good Luck! -
10g RAC with linux 3 AS+ocfs
Hi:
Is anyone install 10g RAC on linux 3AS with ocfs successfully?
I am having problem with CRS installation where installer ask to run root.sh. My first node finished root.sh without any problem but not second node it give me "Failure at final check of Oracle CRS stack." error. Moreover, I found "ERROR: clssnmconnect: failed, rc = 3, node samurai (1), (ADDRESS=(PROTOCOL=tcp)(HOST=racs01-priv1)(PORT=49895))" error in ocssd2.log file. However, I can ping privet and public ip/hostname without any problem. Any input or suggestions are welcome!Did you ever get a responce to this?
I'm having the very same issue, which I can not find a work around.
Documents for the 10g install have been very few and far between, so any help would be the greatest! -
Not able to access the 10g RAC DB
Hi All,
I have installed 10G RAC on WIN2K box with 2 nodes. The installation was fine. I created a database with name "test". It created 2 instances "test1 on node1" and "test2 on node2". Now if i am trying to connect to "test", it fails. but if i use "test1" i am able to connect. How does the failover come into picture when i am using the instance "test1" which is running on node1 and it(node1) goes down. I am new to these, please help me.
Thanks in advance
Regards
KavithaAll connections should be using the failover TNS entry which should look something like this in your tnsnames.ora file:
TEST=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=test1-vip.us.oracle.com)(PORT=1521))
(ADDRESS=(PROTOCOL=tcp)(HOST=test2-vip.us.oracle.com)(PORT=1521))
(CONNECT_DATA=
(SERVICE_NAME=TEST)
When you do a tnsping of the service, you should see the failover configuration, similar to:
tnsping TEST
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=test1-vip.us.oracle.com)(PORT=1521)) (ADDRESS=(PROTOCOL=tcp)(HOST=test2-vip.us.oracle.com)(PORT=1521)) (CONNECT_DATA= (SERVICE_NAME=TEST)))
There are many different configurations for RAC failover and TAF. This is a basic example.
Marg. -
Document on 10g RAC setup on solaris using vmware
Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal ReddyRefer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM -
Question to Oracle about 10g RAC
Hi:
Does Oracle had installed 10gRAC on Redhat3.0AS either using ocfs or raw successful before the software got released?It is indeed successful. We've installed 10g RAC with ocfs/ASM on different storage devices such as SAN's and SCSI disk arrays .
-
Oracle-10g RAC on VMware installed on Windows-7(Host)
Hi,
My host OS is Windows-7. Docs. posted on this forum for RAC on VMware says: your Host OS should be Centos OS and in which you will install VMware and Client tools also. In this way u can clone another RAC2 machine.
But I have Oracle VM Virtual Box installed on Windows-7. Another is VMware Player installed on Windows-7.
I want to install Oracle-10g RAC on my Laptop. Please any suggestions or Docs. related to this.
ShakeelHi,
while this is a documentation of 11gR2 it gives enough information on how to setup a RAC in a VBox environment:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Regards
Sebastian -
MULTIPLE USERS 10G RAC ORACLE_HOME INSTALL WITH ASM/CRS
Hi,
We need to install multiple 10g RAC databases on a two node Sun servers. Below is our configuration:
1) Sun Solaris (ver 10) with Sun Cluster 3.2
2) One ASM/CRS install (by 1 OS account)
3) Four ORACLE_HOME 10g database install (by 4 different OS user accounts)
We would like to use one ASM instance for all four databases with appropriate privileges.
OS User: OS Group
======== =========
oraasm dbaasm - (ASM and CRS install owner)
ora1 dbaora1 - first db owner
ora2 dbaora2 - second db owner
ora3 dbaora3 - third db owner
ora4 dbaora4 - fourth db owner
I understand that certain privileges need to be shared between ASM/CRS and DB owners. Please let me know the steps to be followed to complete this install.
Thanks in advance.Hi
Please read that: Documentation http://download.oracle.com/docs/html/B10766_08/intro.htm
- You can install and operate multiple Oracle homes and different versions of Oracle cluster database software on the same computer as described in the following points:
-You can install multiple Oracle Database 10g RAC homes on the same node. The multiple homes feature enables you to install one or more releases on the same machine in multiple Oracle home directories. However, each node can have only one CRS home.
-In addition, you cannot install Oracle Database 10g RAC into an existing single-instance Oracle home. If you have an Oracle home for Oracle Database 10g, then use a different Oracle home, and one that is available across the entire cluster for your new installation. Similarly, if you have an Oracle home for an earlier Oracle cluster database software release, then you must also use a different home for the new installation.
If the OUI detects an earlier version of a database, then the OUI asks you about your upgrade preferences. You have the option to upgrade one of the previous-version databases with DBUA or to create a new database using DBCA. The information collected during this dialog is passed to DBUA or DBCA after the software is installed.
- You can use the OUI to complete some of the de-install and re-install steps for Oracle Database 10g Real Application Clusters if needed.
Note:
Do not move Oracle binaries from one Oracle home to another because this causes dynamic link failures.
. If you are using ASM with Oracle database instances from multiple database homes on the same node, then Oracle recommends that you run the ASM instance from an Oracle home that is distinct from the database homes. In addition, the ASM home should be installed on every cluster node. This prevents the accidental removal of ASM instances that are in use by databases from other homes during the de-installation of a database's Oracle home.
Maybe you are looking for
-
XML Parsing - problem with a value of an element if starting with space
Hi Experts, I need your valuable guidence to get out of a problem in parsing an XML file. An XML file is read into xstring variable and it is processed to be split into the corresponding itab. Please find the code below types: begin of ty-itab,
-
Mobile Account Creation and old topic
http://discussions.apple.com/thread.jspa?threadID=1786733&tstart=1 -- This was never successfully answered and has been archived and marked as so? The problem it turns out, is that Leopard doesn't seemingly like the AD user's home folder location. I'
-
XML value not reading correctly
I am trying to read an XML response after passing data to a 3rd party server and receiving a reply then act appropriately upon the value of a field (response) The problem is that when I have my CFIF statement, the logic seems to be backwards, if it e
-
Portal export - page not found on view log shell script download
We are currently developing with Portal Version: 9.0.2.2.14A on a Solaris box and I am having difficulty exporting to my production servers. I am following the directions in the Metalink document titled "Exporting/Importing in Oracle Portal 9.0.X" (D
-
Still having errors in Backup but this time less.
Still having errors in Backup but this time less. RMAN> backup database; Starting backup at 17-SEP-13 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=26 device type=DISK channel ORA_DISK_1: starting full datafile backup set channel ORA_DISK_1: