Installing 11.5.8 on REDHAT ENTERPRISE LINUX ADVANCED SERVER 3

Hi all,
I am trying to install 11.5.8 on Red Hat Enterprise Linux Advanced Server 3..
Everything is going fine till the system check like space check and JDK availablity check...
After that when RAPID INSTALL is tryig to install...it is giving error...
When I checked in the log..I found the following lines..
===================================================================
Processing DriverFile = /tmp/RapidInstall/template/adridb.drv
Running Instantiation Drivers for /tmp/RapidInstall/template/adridb.drv
Invalid target file name in driver file: <s_com>/admin/out
instantiate file:
source : /tmp/RapidInstall/template/adrun8i.sh
dest : /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh
backup : /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh to /tmp/templbac/adrun8i.sh
Command: su oraprod -c "cp /tmp/adrun8i.sh /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh" FAILED
Creating File /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh FAILED
setting permissions: 755
setting permissions FAILED
setting ownership: oraprod:dba
setting ownership FAILED
instantiate file:
source : /tmp/RapidInstall/template/adrundb.sh
dest : /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh
backup : /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh to /tmp/templbac/adrundb.sh
Command: su oraprod -c "cp /tmp/adrundb.sh /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh" FAILED
Creating File /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh FAILED
setting permissions: 755
setting permissions FAILED
setting ownership: oraprod:dba
setting ownership FAILED
Step 0 of 2
Command: /d02/oracle/proddb/8.1.7/temp/PROD/adrun8i.sh
Step 1 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 1 of 2
Step 1 of 2
Command: /d02/oracle/proddb/8.1.7/temp/PROD/adrundb.sh
Step 2 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 2 of 2
Processing DriverFile = /tmp/RapidInstall/template/adriapps.drv
Running Instantiation Drivers for /tmp/RapidInstall/template/adriapps.drv
instantiate file:
source : /tmp/RapidInstall/template/adrunias.sh
dest : /d01/oracle/prodcomn/temp/adrunias.sh
backup : /d01/oracle/prodcomn/temp/adrunias.sh to /tmp/templbac/adrunias0.sh
setting permissions: 755
setting ownership: applprod:dba
setting ownership FAILED
instantiate file:
source : /tmp/RapidInstall/template/adrunat.sh
dest : /d01/oracle/prodcomn/temp/adrunat.sh
backup : /d01/oracle/prodcomn/temp/adrunat.sh to /tmp/templbac/adrunat0.sh
setting permissions: 755
setting ownership: applprod:dba
setting ownership FAILED
Step 0 of 2
Command: /d01/oracle/prodcomn/temp/adrunias.sh
Step 1 of 2: Doing UNIX preprocessing
Executing: chmod -R 777 /etc/oraInventory
chmod -R 777 /etc/oraInventory has suceeded
Processing Step 1 of 2
Executing: su applprod -c "/d01/oracle/prodcomn/temp/adrunias.sh APPS APPS"
Statusstring Installing iAS - InstantiateFile -d /tmp/RapidInstall/driver/ias/driver/gias.drv
Error occurred during initialization of VM
Unable to load native library: /tmp/RapidInstall/jre/Linux/1.3.1/lib/i386/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Cannot execute install of iAS ORACLE_HOME
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for PROD instance
Database Availability Check
========================================================
Can anyone pls help me.
Ajoy Kumar Thapa

Do you have experience installing Oracle db on UNIX? It seems to me that you did not even create a group and user with proper rights. Those shell scripts couldn't run.

Similar Messages

Unable to install j2sdk-1.4.2 in Redhat Enterprise Linux advanced server v3

When trying to extract j2sdk-1_4_2 on RedHat Enterprise Linux advanced server, I got the message
Do you agree to the above license terms? [yes or no]
tail: bash: No such file or directory
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
The RHEL is with kernel 2.4.21-37. I got the same error message on extracting both binary code and the rpmfile.
Is it because of the command "tail +511 $0 > $outname" ? And any experienses on how to fix it?
Thanks in advance.

checksum have to be exactyly right. Downloading by IE causes often errors - use firefox in downloading and calculate checksum.

Installing OBIEE on 64 bit Redhat Enterprise Linux 5

Hello,
We have a 64 bit Redhat Enterptise Linux 5 box, and I installed on it the 32 bit Oracle Database client as well as the OBIEE software.
The 64 bit installation requirements state: "For 64-bit Linux system installations, you must use the Oracle Database Client 32-bit libraries."
However, the installer never prompted me for the location of the 32 bit Oracle Database Client libraries.
How can I make sure that these libraries were indeed used during the installation?
Thank you very much.
-sb

The installer does not reference any libraries. You will need to place them in the correct or refer to the Database client libraries via your system path for your Server to work correctly.
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
Configuring Oracle Databases BI Server Under UNIX (page 135)

Patches for Installing Oracle 9i on Red Hat Enterprise LINUX 3.0 AS

I recently purchased An Oracle Database Enterprise Edition � Trial License.
I am attempting to install Oracle 9i on Red Hat Enterprise Linux Advanced Server 3 (RHEL AS 3).
After several unsuccessful attempts and consultation with the FAQs available on the Oracle site I have discovered
that it can not be installed without the following patches.
P3095277_9204_LINUX.zip
P3238244_9204_LINUX.zip
P2617419_210_GENERIC.zip
P3006854_9204_LINUX.zip
P3119415_9204_LINUX.zip
Can anyone tell me how I can aquire these patches?
This is for an eval of the product on the platform mentioned above. If I can not complete a successful install,
there is no way for my company to evaluate the product
and eventually purchase it.
You can contact me at this email address [email protected]

Daer suneetkapoor:
I am looking for P3006854_9204_LINUX.zip in order that can be properly able to install oracle9i on Linux AS 3. And I saw you to reply the message on forum that you can share the patch. Would you mind if you can send an email with the patch for me immediately, I will greatly appreciate it.
thanks you
regards
ellery
PS: My email address is [email protected]

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

Problem while intalling oracle 11i(11.5.9) on Redhat Enterprise Linux 3

Dear all,
we are installing oracle 11i ( 11.5.9) one Redhat Enterprise Linux 3
it gives the following error massage .
Error code received when running external process.check the log file for details._
Running Database Install Driver for PROP instance._
Please any suggestion.
Thanks

Hi,
This is a generic error, so please check the installation log files for more details about the error.
Regards,
Hussein

Flash media interactive server with redhat enterprise linux ?

Was wondering if anyone was having issues trying to install
the flash media interactive server on a RedHat Enterprise Linux
machine. It seems that the installer that is packaged with the
program in incompatiable. If so what are you doing to get the
server installed? Thanks for any help

i check the dependencies and noticed that there was one that
was not satisfyied " libasneu.so.1 as it was link to nothing. After
moving the file to the /usr/lib and running the ldd command on the
fmsmaster file i was then able to see the link between the two.
When I try to install the program again I recieve the same error
message
"no package installFMS available"- this happens when i try
using yum to install the program or
ERROR: your distribution, unknown, is not supported by this
Adobe Flash Media Server installer. - happens when ./installFMS is
ran.
anyone else know of any other tricks to get this installed ?
Thanks again for everyone help on this issue.

Guide to installing XE and Apex on Oracle Enterprise Linux 5.3 (64 bit)

I have just been through a time consuming and frustrating process of installing Oracle XE 10gR2 on Oracle Enterprise Linux 5.3 x86-64 and I want to share my experience so that others can benefit from it and overcome the same problems more quickly.
Prior to starting I had installed OEL 5.3 and been using it for a few days. The system I am using is a home built box with an AMD Phenom X4 955 Black Edition, 8 Gb RAM, Highpoint RR2680 RAID controller with 4 1TB disks in a RAID5 array and an additional 320Gb HDD storing the OS. I am using KDE3.5 on the desktop.
The main problem I encountered was with SELinux. As I eventually intend to have this system exposed on the Internet I was reluctant to switch it off despite having read extensively about the issues surrounding it and Oracle. I had several failed attempts at the installation process before succumbing to the reality that SELinux and Oracle are not happy bedfellows. I decided to switch SELinux to permissive mode having followed the advice here.
I found a very helpful guide to installing XE on Linux here as part of the installation of an application called Spacewalk. Note that you do not need to complete the whole Spacewalk installation, but just follow the instructions in the linked page.
Before you start you need to ensure that the UID of your oracle user is less than 500. Mine was 500, so I used the following commands to fix this:
usermod -u 250 oracle
find / -uid 500 -exec chown oracle {} \;
These change the oracle UID to 250 (but check that isn't already used first!) and the find command searches for all files that were owned by oracle (but weren't after the usermod cmd) and changes them back to oracle's ownership.
Now follow the Spacewalk instructions until you reach the Server Setup section. Before you do this you need to make a couple of changes to the script /etc/init.d/oracle-xe. I found these changes in various places, such as [link(1)|http://forums.oracle.com/forums/thread.jspa?messageID=1345771&#1345771] and [link(2)|http://dbataj.blogspot.com/2008/08/lblibrarypath-is-not-set-on-startup.html].
Note that in link(1) the oracle-xe-selinux packages installed have the same effect as the chcon command on the shared libraries so it isn't necessary to perform this step.
Open /etc/init.d/oracle-xe in vi (or your favourite editor) and do the following:
line 49: change /bin/su to /sbin/runuser
after line 52 (export PATH...) add the following lines:
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
There are further changes recommended to /etc/init.d/oracle-xe in [this post|http://forums.oracle.com/forums/thread.jspa?messageID=3201491&#3201491] but I haven't done them yet.
Having done the above changes you can now configure Oracle XE by running /etc/init.d/oracle-xe configure (as root!). As I have Apache Tomcat running on port 8080 I changed the default HTTP port to 8500 but kept the listener on its default port of 1521. Once the confuration script is done you will need to change the ports SELinux uses for Oracle as follows:
semanage port -d -t oracle_port_t -p tcp 9000 - deletes port 9000, which is the SELinux default port for Apex
semanage port -a -t oracle_port_t -p tcp 1521 - ensure that listener port is OK (assuming you used default of 1521, change accordingly if you didn't)
semanage port -a -t oracle_port_t -p tcp 8500 - add the new Apex HTTP port to SELinux
After all this running:
semanage port -l | grep oracle
should show you:
oracle_port_t tcp 1521, 8500
I ignored the TNSNAMES.ORA part of the Spacewalk instructions and proceeded with the 'Client setup on 64bit platform' and 'Configuring sqlplus' sections.
For the latter I created a bash script which I have made available in the oracle user and my own user's home directories:
cat > configure_oracle_10g_xe.sh
ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server
PATH=$PATH:$ORACLE_HOME/bin
ORACLE_SID=XE
export ORACLE_HOME ORACLE_SID PATH
LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
I did this as I intend to install other Oracle databases, e.g. 11gR2, on this box later so I didn't want to put the above in .bashrc.
Having done the above you should be able to log into the database using sqlplus and the XE setup is complete.
The upgrade of Apex 2.2 to Apex 3.2.1 was fairly painless so I won't go into much detail about it - just follow the instructions provided by Oracle.
The only issue I had was right at the end of the process and is documented and answered in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=958611&tstart=0].
That's it - I hope somebody will find this useful.

On Oracle Metalink site, there are many documents which says that Oracle 32 bit software works on 32 bits OS and 64 bits software works on 64 bits OS. Official support is only in those combination....
So there is no good way to help you in your case-XE is 32 bit application with hard codded compiled libraries which most of them would not work on 64 bit OS.
Sorry
8(
Hope this helps

Running ocs10g services on Redhat Enterprise linux v4.0

Hello,
How can i run Collaboration Suite Services from linux Redhat Enterprise Linux v4.0?
Thanks
Khaled Fahmy

Can you be more specific?
Do you have a working installation? Is the manual not explaining situations that you are in?
OCS does run on RH 4.
cu
Andreas

Forms 10g certification on Redhat Enterprise Linux 5 ??

Is Forms 10g certified on Redhat Enterprise Linux 5 ??

I don't think. of sure RHEL 5 is not certified for DB 10gR2 and even for OAS 10g.
Even if I have made an installation of DB 10gr2 for RHEL 5 with xen and it's work, meanwhile OAS 10 didn't work!
Anyway,Try to search for certification matrix on Oracle site

Exception signal: 11 (SIGSEGV) on RedHat Enterprise Linux

Oracle 10g XE running on RedHat Enterprise Linux.
Certain operations (in this case a delete) cause Oracle instance to die with Exception signal: 11 (SIGSEGV).
Anyone have any ideas? How do I troubleshoot this, or is it obvious from the trace file entry below that there's a configuration problem?
THANKS FOR ANY HELP!
Relevant section from trace file:
PARSING IN CURSOR #5 len=66 dep=0 uid=36 oct=7 lid=36 tim=1217282870362781 hv=13
17951628 ad='4727614c'
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
END OF STMT
PARSE #5:c=1000,e=49,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1217282870362779
EXEC #5:c=0,e=240,p=0,cr=1,cu=8,mis=0,r=2,dep=0,og=1,tim=1217282870363056
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
1080, PC: [0xa2c6b92, kpoal8()+4230]
Registers:
%eax: 0xffe5b890 %ebx: 0x00000000 %ecx: 0xf7b604a4
%edx: 0x00000000 %edi: 0x00000000 %esi: 0x00000000
%esp: 0xffe59724 %ebp: 0xffe599b4 %eip: 0x0a2c6b92
%efl: 0x00210246
kpoal8()+4217 (0xa2c6b85) je 0xa2c6b8c
kpoal8()+4219 (0xa2c6b87) mov 0xc(%edx),%edx
kpoal8()+4222 (0xa2c6b8a) jmp 0xa2c6b98
kpoal8()+4224 (0xa2c6b8c) mov 0x15c(%ecx),%edx
kpoal8()+4230 (0xa2c6b92) mov 0x1080(%edx),%edxkpoal8()+4236 (0xa2c6b98) mov 0x18(%eax),%ecx
kpoal8()+4239 (0xa2c6b9b) mov %edx,0x14(%ecx)
kpoal8()+4242 (0xa2c6b9e) jmp 0xa2c6690
kpoal8()+4247 (0xa2c6ba3) movzb 0xc2b9a63,%edx
*** 2009-07-01 18:20:59.254
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [kpoal8()+4230] [SIGSEGV] [Address n
ot mapped to object] [0x1080] [] []
Current SQL statement for this session:
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+27 call ksedst1() 1 ? 1 ?
ksedmp()+557 call ksedst() 1 ? 3038 ? F7000000 ?
F7CECF88 ? FFFFFFFF ?
F7CECF80 ?
ssexhd()+863 call ksedmp() 3 ? A2C6B92 ? 616F706B ?
2928386C ? 3332342B ? 30 ?
kpoal8()+4230 signal 00000000 B ? F7CEEC8C ? F7CEED0C ?
opiodr()+835 call 00000000 5E ? 17 ? FFE5B890 ?
ttcpip()+1839 call 00000000 5E ? 17 ? FFE5B890 ? 5 ?
opitsk()+1027 call ttcpip() C6E6D80 ? 5E ? FFE5B890 ? 0 ?
FFE5AD6C ? FFE5B9A0 ?
opiino()+821 call opitsk() 0 ? 0 ?
opiodr()+835 call 00000000 3C ? 4 ? FFE5C460 ?
opidrv()+466 call opiodr() 3C ? 4 ? FFE5C460 ? 0 ?
sou2o()+91 call opidrv() 3C ? 4 ? FFE5C460 ?
08288137 call sou2o() FFE5C444 ? 3C ? 4 ?
FFE5C460 ?
main()+111 call 082880C2 2 ? FFE5C490 ?
__libc_start_main() call 00000000 2 ? FFE5C554 ? FFE5C560 ?
+220 638810 ? 0 ? 1 ?

Sanjay --
I don't know what "set all ORACLE variables" means. Is there a manual page somewhere that explains this? I mean, there are a LOT of variables.
This XE installation works 99.99% of the time, involving hundreds of tables and a large variety of queries, functions, packages, triggers etc. Only this one transaction causes the error, so I'm not sure what additional ORACLE variables would need to be set or modified.
Also, what's the procedure for submitting an SR to Oracle? Do you have a link? I looked at the Oracle site and it seems to require the user to have a commercial support level before anything can be submitted.
Thanks.

Installing LIS 2.1 on SUSE Enterprise Linux 11

I try install LIS 2.1 on SUSE Enterprise Linux and I have received the next error:
whdvlxdisney07:/opt/linux_ic_v21_rtm # make
Building all modules...
make -C /lib/modules/2.6.32.24-0.2-pae/build SUBDIRS=/opt/linux_ic_v21_rtm/src modules
make[1]: Entering directory `/usr/src/linux-2.6.32.24-0.2-obj/i386/pae'
make -C ../../../linux-2.6.32.24-0.2 O=/usr/src/linux-2.6.32.24-0.2-obj/i386/pae/. modules
CC [M] /opt/linux_ic_v21_rtm/src/BlkVsc.o
CC [M] /opt/linux_ic_v21_rtm/src/osd.o
/opt/linux_ic_v21_rtm/src/osd.c:469:41: error: macro "INIT_WORK" passed 3 arguments, but takes just 2
/opt/linux_ic_v21_rtm/src/osd.c: In function Ã¢WorkQueueQueueWorkItemÃ¢:
/opt/linux_ic_v21_rtm/src/osd.c:469: error: Ã¢INIT_WORKÃ¢ undeclared (first use in this function)
/opt/linux_ic_v21_rtm/src/osd.c:469: error: (Each undeclared identifier is reported only once
/opt/linux_ic_v21_rtm/src/osd.c:469: error: for each function it appears in.)
/opt/linux_ic_v21_rtm/src/osd.c:487:41: error: macro "INIT_WORK" passed 3 arguments, but takes just 2
/opt/linux_ic_v21_rtm/src/osd.c: In function Ã¢QueueWorkItemÃ¢:
/opt/linux_ic_v21_rtm/src/osd.c:487: error: Ã¢INIT_WORKÃ¢ undeclared (first use in this function)
make[4]: *** [/opt/linux_ic_v21_rtm/src/osd.o] Error 1
make[3]: *** [_module_/opt/linux_ic_v21_rtm/src] Error 2
make[2]: *** [sub-make] Error 2
make[1]: *** [all] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.32.24-0.2-obj/i386/pae'
make: *** [all] Error 2
Can you help me?

Are you sure? SP1 is not in this list: http://technet.microsoft.com/en-us/library/dn531027.aspx
I am seeing the same issue on SUSE 11 sp1 on HyperV 2012 R2, HyperV prompts me to install an Integration Disk:
"The mouse in unavailable in the Remote Desktop Session when virtual guest services are not installed in the guest operating system."

Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER -PATCHES

HI
Can some one help me out,
is Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER , is having some patch
set to work on Developer2000,
if so,please let me know where in we get the same
tks
narayana rao

hi,
I am trying to install oracle 9i rel2 on red hat adv server 2.1
Installation and Linking looks fine and during configuration ,
the database configuration assistant fails with 'End of Communication channel'.
This makes the software not usable as we get the same error while trying to connect to the database too..
any ideas?Check the "Oracle Installation Errors" section at
http://www.puschitz.com/OracleOnLinux.shtml
In this section I explain what I did about the
"end-of-file on communication channel" error
on RH AS.
Any feedback on this problem and solution is appreciated.
Werner

Installing Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1

Hello,
how the subject says I'd like to install Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1. Can anybody of you say me where to find a good HOWTO/Documentation?? It would be nice if you help me!
Konstantin

This install is not on a Pentium 4
I'm trying to install on pentium III
Memory 512Mo
Hard Disk 20 Go
Thanks again

OSP support for Red Hat Linux Advanced Server 5.0

Wondering, if anybody tried to install Red Hat Linux Advanced Server 5.0 with N1 SPS OSP? Does it work as with Red Hat Linux Advanced Server 4.0?
Thorleif Wiik

The current official GA date for SPS 6.0 is Aug 20. There is a follow-on release for plug-ins and the MS/CLI on Windows. This is currently scheduled for some time in September.

Installing 11.5.8 on REDHAT ENTERPRISE LINUX ADVANCED SERVER 3

Similar Messages

Maybe you are looking for