Installing 11gr2 and 11gr2 on same laptop

I have 11gr2 on my laptop now i want to install 11gr1 also for some R&D. I am not expert in this area, i need a step by step document for this, can some one help me in this respect, i shall be very thank full.........
I am using linux as OS
Edited by: malhi on Feb 17, 2011 8:38 PM

Hi,
What is your OS version?
Go to http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html and download the software for your OS and after downloading, there will be a quick installation guide document for your OS, just follow that and it is quite simple. In case of any problem, just ask on this thread.
Salman

Similar Messages

  • How to Install Discoverer and Reports in same Laptop

    Does anyone knows how to install Discoverer 4.1 and Reports 9.1 in the same machine?

    Hi Ricardo,
    Not sure of the Discoverer version. Does Discoverer 4.1 come with Oracle9iAS? If yes, just go ahead and install Oracle9iAS, because Reports9i is part of Oracle9iAS.
    If in doubt about the Discoverer version, you might also want to ask this in the Application Server General Forum:
    Oracle Application Server - General
    Navneet.

  • I have install 11gR2 on my laptop getting error

    I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
    I getting this error
    ORA-01503: CREATE Controlfile / Failed
    and
    ORA-01158: Database already mounted
    i need to set up a database a 3 different schema
    because i am doing a install of Hyperion Share service, Essbase and Planning
    this is the first install on my laptop !!!!!!!!!!!!!
    can I get the detail process on setting up an Database and schema
    Please advise

    You have already asked the same question but never replied - 11gR2 Error when installing a database essbase on install of 11.1.2.1
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Is it OK to install BW and BO in same server

    Is it OK to install BW and BO in same server ?
    BW 3.5
    BO XI 3.1 SP2 FP2.9
    Is there any known issue in this approach ?
    What is the recommended system requirement for it ?

    I would do it only if it is on Unix and the H/W is powerful enough.
    Keep in mind that when you shutdown/reboot you are taking offline 2 systems at once.
    In 64bit Windows there are conflicting versions of the required rfc libraries (32bit and 64bit) which are not easy to resolve and will affect the MDX parser.
    Regards,
    Stratos

  • MSA and MSE in same laptop ?

    Hello all,
    I would like to know if is possible (any limitation or impediment) to install in the same laptop, the MSA (Sales) and MSE (Service) Mobile Applications ?
    Rgds,
    Fábio

    Answered in Mobile Forum

  • Just want to install PS and Bridge on the laptop...

    I own a license for CS6 Production Premium. On my new Mac Book Air(256 GB Drive) I would like to just install Photoshop and Bridge. How do I custom install. When I start the download I get the entire CS6... Where is the custom install window? Do I install everthing and then remove the unwanted progams? I have the same issue with my license of CS5 Design Premium... I just need InDesign on the MBA
    Thanks
    Ross

    The custom install will come after you enter you serail number and login with the Adobe ID.wherein you can select which application you want to install.
    http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-cs5-cs5-5.html (the link is for CS5 but the sequence is same for the CS6)

  • I want to install DEV and QAS on same Server

    Hello all,
    Can anybody tell the step by step procedure to install dev and qas on the same server, i have installed Dev with win 03 server and oracle as a DB.
    Now what to do? please provide some document or note to do this.
    I am waiting for ur reply, its urgent....
    Jitender

    Hello Mr.X,
    SAP suggests that even for a single system installation data files,redo log files and back up of log files should be placed on different hard disks. So it makes sense to do the same for different instances as well. Going to ORA_HOME you need mutiple ORA_HOME.
    For mutiple ORA_HOME please check this link :
    http://www.lc.leidenuniv.nl/awcourse/oracle/em.920/a96697/moh.htm.
    System number definitely have to be different. System number will also influence the ports.
    Also check the SAP installation guide for installation of 4:6C on unix/oracle platform. It discusses this mutiple database instance concept.  Other higher release installation guides also do that.
    Please award points for useful answers.
    Regards.
    Ruchit.

  • Need to install CRM and ECC in same server

    Hi Experts,
    I want to install CRM and ECC server in a single server. (Win2003/MS SQL server)
    I think we need more space (Sizing).
    Apart from this, i have couple fo questions in my mind..
    1,Which server should i install first.?
    2,Does it use the same Database for both servers (CRM and ECC) installation?
    3,I know that SID is differ for both server, does it use the same kernel for Both.
    4, What are the dependent and independent files ?
    5, How the database wil behave when i stop/start one server ?
    Could someone help me the stpes.
    Thanks and regards
    Thirumal

    1,Which server should i install first.?
    Doesn't make any difference... you can start with either of them
    2,Does it use the same Database for both servers (CRM and ECC) installation?
    Yes, It will create separate instances on the DB.
    3,I know that SID is differ for both server, does it use the same kernel for Both.
    No.. they'll have separate kernel directories.
    4, What are the dependent and independent files ?
    Files will be all independant, beside the hosts and services files.. but sap wise everything should be under different SID's (as far as i remember)
    5, How the database wil behave when i stop/start one server ?
    You have to be carefull with this one... if you stop the DB it will affect both systems... so when stopping the system make sure you use stopsap/startsap r3
    Regards
    Juan

  • Can we install labview and labcar in same PC?

    HI,
        Can we install labview in same PC where LabCar is installed?

    Be more specific:
    Do you mean this: http://www.kineticcity.com/labcar/
    Or this: http://www.etas.com/en/products/applications_ecu_development-testing-labcar_component_overview.php
    Or this: http://www.mathworks.com/products/connections/product_detail/product_35658.html
    I prefer the first myself.
    Two different applications. Like having Word and Photoshop installed.

  • How to Install XI and EP on Single server

    Hi,
    How to install XI and EP on same server. I tried to install XI then EP . After EP installed then iam not able to access XI j2ee engine . I think some where port conflicts . I gave system number for XI : 00 and EP : 02
    Can any one help for this. Where did i made mistake.
    Thanks
    Kristene

    Hi Kristene,
    I have installed XI and EP on the same server (for test purposes) without any problems, so it should be possible. I installed them in a different order (first EP then XI), but I don't think that matters much.
    The only real difference is that I kept the system number the same.
    What do you mean exactly with not being able to access the XI j2ee engine? How did you try to access it?
    Regards,
    Martin

  • Configuration Failed after Installing 11gR2 Forms and Reports.

    Hi all Gurus,
    I have installed following successfully:
    1. Weblogic Server 10.3.6.
    2. JDK 7 64-bit.
    3. Oracle Database 11gr2 64-bit.
    4. Windows Server 2008 Ent 64-bit.
    When I install 11gr2 Forms and Reports, it installed successfully,
    after that I click “Configure”, then it open another window as “Configuration Progress”, which shows following modules to be configure:
    Creating Domain
    Creating Managed Server: WLS_FORMS
    Creating Managed Server: WLS_REPORTS
    Deploying Enterprise Manager
    Restarting ApplicationServer
    etc.
    At very first “*Creating Domain*”, it shows “*Failed*", same with other modules
    There is also no space or () in “Path Enviromental System Variable”.
    Pl guide me !
    Thanks in advance.
    Edited by: Sukhvinder on Nov 29, 2012 7:53 PM

    I don't fully understand your reply. If you do not understand how to identify whether or not the machine where you are installing the product uses a static IP or not, please consult with your Network or System admin if you have one. In short, your Windows 2008 machine cannot use DHCP for obtaining its address, regardless of what the resulting address is.
    As far as new failures, this is likely the result of you not completely cleaning up the earlier failed attempts. Before attempting to run the installation again, uninstall and delete all previous attempts. This means:
    1. Uninstall FMw. Depending on how far the installation ran, you may find a Windows shortcut to launch the installer. If not, just delete the directories.
    2. Uninstall WLS. This can be done from the "Programs and Features" panel on the Windows Control Panel.
    3. After uninstalling the products, do one last scan of the file system to ensure that you have removed all related directories. Be sure to also delete C:\bea as it belongs to the WLS installation.
    Once you have fully removed the installations, reboot the machine before attempting to reinstall.
    Once the machine has been rebooted and you have logged in, ensure that you have accomplished the following before retrying:
    1. You are a Windows user with "Administrator" permissions
    2. The machine is not configured to use DHCP
    3. The system PATH and CLASSPATH do not include parentheses symbols (e.g. (x86)) - I mentioned this earlier.
    4. Ensure that you have reviewed the Sys Requirements doc and comply with its recommendations:
    <blockquote>http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-requirements-100147.html</blockquote>
    5. Read the Installation Guide:
    <blockquote>http://docs.oracle.com/cd/E24269_01/doc.11120/e23960/toc.htm</blockquote>
    Specifically, be sure to review the Troubleshooting section.
    If after following these instructions you cannot install the product, I would recommend that you contact Oracle Support

  • I have firefox 5 but I want to install firefox 4 as well on the same laptop because I need to take an online exam and the software does not suppot Firefox5. Can I do it and if Yes how/where?

    I have firefox 5 on my laptop.
    I dont have any problem with that, but I need to take an online exam and the software I am going to use does not support Firefox5, only 4.
    The question is can I install firefox4 on the same laptop? Where can I find a copy?

    Hi arpriltime,
    Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
    Hopefully this helps!

  • Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

    Update 11.1.4 failed on WVista and windows 7 laptops. ITunes do not work on either computer. I re-installed it on Windows 7 and again got same message"Error 7(windows error 126).

    Hello notime4,
    The article linked below details some useful troubleshooting steps that can help stabilize iTunes on your computer.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/TS1717
    Cheers,
    Allen

  • Error installing 11gR2 on windows 8

    I downloaded oracle database 11gR2 software for windows X64 platform from OTN.  it contains two distinct zip files(file1 and file2).  the first file extracted but couldn't do the same for the second file. It keeps telling me zip file is empty. I decided to go along and install but after 40% (copying file), I got an error saying the file path was not found
    ' File not found C:\app\Chike\product\11.2.0\dbhome_2\owb\external\oc4j_applications\applications\WFMGRApp'
    pls I need possible solutions to solve this.
    thanks Guys

    First, Win 8 is not a certified OS to install 11gR2 - Oracle Database Preinstallation Requirements
    Which version of Win 8 ? If you have Pro or Enterprise, you will have to install 12c - Oracle Database Preinstallation Tasks
    Home versions of Windows are not certified for any Oracle installs.
    You will need to download both zip files, then unzip both into a single directory before running setup.exe. Your unzip issue indicates that the second zip file is corrupted.
    HTH
    Srini

  • Install 11gR2 RAC Database Problem: Invalid source path /.../Datafiles

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 VMs (rac1 and rac2) whose OS are Oracle Linux 5.6 in VMPlayer according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    I have just finished installing Grid infrastructure and start to install RAC database 11gR2.
    I have downloaded 2 files from https://edelivery.oracle.com as below:
    V17530-01_1of2
    V17530-01_2of2
    When I start to install the RAC database using the above 2 files but get the error below:
    [ora11g@rac1 V17530-01_1of2]$ ls
    database
    [ora11g@rac1 V17530-01_1of2]$ cd database
    [ora11g@rac1 database]$ ls
    doc install response rpm runInstaller sshsetup stage welcome.html
    [ora11g@rac1 database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking Temp space: must be greater than 120 MB. Actual 5028 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 2224 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-03-06_11-08-23AM. Please wait ...
    Invalid source path '../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles' specified for unzip. Unzip command failed. Please check oraparam.ini and specify a valid source path.
    : No such file or directory
    [ora11g@rac1 database]$
    As we see the output above, the error is Invalid source path /../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles.
    My questions are:
    First, are the files V17530-01_1of2 and V17530-01_2of2 the correct files for 11gR2 RAC database ?
    Second, how to solve the issue "Invalid source path /../stage/Components/oracle.jdk/1.5.0.17.0/1/DataFiles" ?
    Thanks.

    Folks,
    Hello. thanks a lot for replying.
    I go up one level ( / ) and run the command again as below:
    [root@rac1 /]# du --max-depth=1 -h
    Its output:
    8.0K ./srv
    83M ./sbin
    9.0G ./tmp
    4.9G ./usr
    157M ./var
    20M ./boot
    8.4M ./bin
    3.3G ./u01
    252M ./lib
    8.0K ./selinux
    12K ./mnt
    16K ./lost+found
    164M ./dev
    0 ./misc
    29M ./lib64
    8.0K ./u02
    100K ./tftpboot
    12K ./media
    0 ./proc
    248K ./root
    0 ./sys
    117M ./etc
    3.3G ./home
    3.5M ./opt
    25G .
    [root@rac1 /]#
    As we see the output above, it seems that 25GB disk space is used and /tmp occupies 9GB.
    I have remove the files under /tmp but after reboot OS, the same files come up again under /tmp.
    Some folks use 12GB for each of their VMs and is enough to install Grid and RAC Database.
    My questions are:
    Why my VM with 30GB disk space does not have enough disk space to install RAC database ?
    Can any folk help to solve the issue ?
    Thanks.

Maybe you are looking for