Installing 2 ssl certificate on one machine with two virtual hosts

Hi,
If you have a managed server in a cluster that has two virtual hosts running
on it how can you intsall the ssl certificates for both virtual hosts, in
the admin console.
any help would be great!

OK....I figured it out.
I was able to set the IPV4 properties on the ones needing filtering to use the IP or OpenDNS as the primary DNS and my server address as the secondary and that works.
I removed OpenDNS forwarder from the server, flushed dns on all machines and so far it's working perfectly. The machines that are not going to be filtered just go through the server for DNS.
Hopefully, after a while it doesn't break down!

Similar Messages

Installing SSL Certificate for ITS WGate with sapgenpse

Hello.
We have setup Web Dispatcher and ITS WGate on the same host. Dispatcher accepts connections from 443 and ITS accepts connections from 8000.
We have done SSL Settings for Web Dispatcher with sapgenpse successfully.
But as WGate is running on Microsoft IIS Server, we couldn't install the same certificate response to Microsoft IIS. Is there a way to install certificate for ITS Server with sapgenpse tool or IIS Server's tool?
Or should we demand another SSL response from CA generated from Microsoft IIS Server?
Thanks in advance.
Edited by: teknikdanisman on Jan 15, 2010 10:42 AM

I have solved the problem. I have exported the SSL key with sapgenpse in format P12 and imported from IIS.

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot

Hi All, I have two questions. First of all my CS3 is saying that it is installed on more than one machine, is there a way of seeing what machines my serial number is registered to? If i want to buy another CS3 serial number how do i go about it? I cannot afford to move to the creative cloud.....

there's no way for you to identify which machines have or had cs3 activated, and you can no longer purchase a cs3 license from adobe.
you can request an activation count reset (Contact Customer Care) and deactivate your cs3 on all your computers. you can then install and activate on up to two computers.

Unable to install SSL Certificate - ADMIN4118: Only one server certificate can be installed at a time

Hi,
We are trying to install SSL certificate (Verisign Class 3) on iPlanet Web Server (version 7). However, at the final step we are getting the error "ADMIN4118: Only one server certificate can be installed at a time"
We are following the below steps,
Under "Server Certificates" tab,
     -> Click on "Install" button.
     -> On "Select Configuration" click on "Next" button.
     -> On "Select Tokens and Passwords", select default token as "internal" and click on "Next" button.
     -> On "Enter Certificate Data", select option as "Certficate File" and give path to the certificate file which is having .p7b extension
     -> On "Certificate Details" we are getting warning as "Duplicate Server Details Found" and it's by default using the existing certificate's nickname.
     -> On "Review" page after clicking "Finish" button, an error is displayed saying "ADMIN4118: Only one certificate server can be installed at a time"
There are multiple sub-domains availble and the new certificate we want to install contains one more sub-domain.
So, say currently the subdomains present are,
1.abc.com
2.abc.com
so on...
and now we are trying to install a SSL certificate having one more subdomain say 10.abc.com.
Please let us know if you have solution to this problem.
Thanks,
Rajesh

Hi Rajesh,
That error is most commonly seen when you are trying to install a certificate chain into the Web Server.
The chain should be installed using the "Certificate Authorities" tab per the following steps:
1) Login to the Admin Console.
2) Click Edit Configuration from Common Tasks > Configuration Tasks.
3) Click the Certificates > Certificate Authorities tab from the Configurations page.
4) Click the Install... tab from the Certificate Authorities (CAs) page.
An Install CA Certificate Wizard opens. The wizard guides you through the settings available for installing a Certificate Chain. Select Certificate Chain when prompted for Certificate Type.
You should then see the CA and intermediate certificate(s) listed in the security database.
If you have access to MOS, more details can be found in the MOS KM Note:
   Oracle iPlanet Web Server - 'ADMIN4118: Only one server certificate can be installed at a time' When Installing Certificate Chain (Doc ID 1925025.1)
regards
Tracey

How do we sync contacts and calendars (ONLY) between two iCloud accounts, two iPhones and one iMac with two user accounts?

This is complex. Until today we had one iMac with two user accounts - one for me and the other for my wife. We sync'd our calendars and contacts between our two user accounts using my iCloud account, thereby keeping our schedules coordinated and our contacts information always the same between us. Also, as I had an iPhone, I sync'd my phone with my iCloud account, thereby keeping the contacts and calendars in the two user accounts on the iMac AND my iPhone sync'd. (I also sync'd other things, like Notes and Mail and Safari settings, between my iPhone and my user account on the iMac, but my wife did not want to be burdened with all my emails showing up in her email account and I wasn't interested in hers, etc., so we didn't sync anything between us other than calendars and contacts.)
We've finally bought my wife an iPhone and set up an iCloud account for her. And of course she now wants to sync several items from HER account on our iMac to HER iPhone, but I don't want them, just as she doesn't want all of my other stuff. But we still want our mutual calendars and contacts to sync to HER new iPhone, just like they already do to mine. But I can't figure out how to CHANGE her iMac user account from using MY iCloud account on the iMac to using HER new iCloud account, and then having HER iCloud account speak to MY iCloud account but share JUST our calendars and contacts.
Originally I tried a workaround by simply having her iPhone log into my iCloud account. That works great for the calendars and the contacts. But...she can't sync anything else from her iMac account to her new iPhone because she's presently "forced" to use my iCloud account. And neither of us want to sync our other things to each other's iMac accounts or iPhones. Also as we're both using my iCloud account, in things like the Find My iPhone app, the Cloud is seeking two phones labeled with my name and none with her's. So we definitely don't want this as the set-up and communications network between our devices.
We want to set up our users on the iMac to sync to our SEPARATE AND DIFFERENT iCloud accounts and then have those iCloud accounts sync calendars and contacts (ONLY) between themselves, and then push that data to our separate iPhones (or the other way, from either of our iPhones to the individual accounts on our iMac and the other person's iPhone). Does this description make sense to you? I've diagramed it nicely using Keynote, but even thiough I can draw it, I can't figure out how to set up and configure all the devices to make it work. If you would like me to send the Keynote slides (just two of them - the current and desired configurations - please send your email address to me at [email protected] and I'll be happy to forward it to you.
If anyone can help me set this up I'd be most appreciative! Thanks so much. Merry Christmas and Happy New Year to all readers in this community!

BobT.
I had the same problem, and decided to look into it last night.
First of all, the solution I would like to have is for Apple to allow for selection of iCloud accounts per application, i.e. Contacts to one, Photo Stream to another. I believe this would be the most straight forward solution for the problem we are facing.
Since this is not an option I came up with a workaround. I was most interested in solving this for Contacts, so this is what I tested for. Now I have all 3 devices with the same contacts.
1) Turn off iCloud for Contacts on all devices. On the device that has the Contacts list that you would like to propagate to all others select to keep the contacts, and on the others select not to keep them.
Note that the current backups still exist on iCloud, so in case something goes wrong you can still turn the iCloud for Contacts back on to get your current Contacts back.
2) In iTunes, sync All Contacts with the phones, starting with the one with the Contacts content you chose to keep.
From this point on, the 3 devices should sync contacts with each other.
This, of course, will stop your iCloud backups of Contacts, but I don't think this is really needed. You are already storing copies of your Conacts on 3 devices, which for good parts of the day are likely not all co-located. You also potentially have Time Machine backups turned on, which would mean there is a 4th copy there as well. For the case of Contacts iCloud only complicates matter ... that is until Apple implements the solution I first wrote about.

Problem in Rmi in machine with two IP local & internet

I am having problem in Rmi in machine with two interfaces local & internet
i.e..
if I set property java.rmi.server.hostname+ to the one with internet ip address using System.setProperty()
I can not access Rmi through local LAN
if I do not set the property Everything works fine in LAN but I can not access the RMI from Internet
Pls tell me the solution

Consider the code Here and if you can suggest in this code what changes I have to make ,I will be thankful to you
// Class MyHelloServer
package rmi.server;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.Inet4Address;
import java.net.InetAddress;
import java.net.MalformedURLException;
import java.net.NetworkInterface;
import java.net.SocketException;
import java.rmi.*;
import java.rmi.server.ServerNotActiveException;
import java.util.ArrayList;
import java.util.Enumeration;
import javax.swing.JOptionPane;
import rmi.bl.HelloImpl;
 public class MyHelloServer
 static public ArrayList hostList = new ArrayList();
 static String hostname=null;
 static String SERVER_PORT="9999";
 static String MULTIPLE_BIND="true";
 static{
 startTest();
 public static void startTest(){
 try {
 Enumeration enum1= NetworkInterface.getNetworkInterfaces();
 while(enum1.hasMoreElements()){
 NetworkInterface networkInterface = (NetworkInterface)enum1.nextElement();
 Enumeration enum2 = networkInterface.getInetAddresses();
 while(enum2.hasMoreElements()){
 Object obj = enum2.nextElement();
 if(obj instanceof Inet4Address){
 if(!hostList.contains(((Inet4Address)obj).getHostAddress())){
 hostList.add(((Inet4Address)obj).getHostAddress());
 if(networkInterface.isPointToPoint()){
 hostname=((Inet4Address)obj).getHostAddress();
 }catch (SocketException e) {
 e.printStackTrace();
 if(hostname!=null){
 System.setProperty("java.rmi.server.hostname", hostname);
 System.out.println(System.getProperty("java.rmi.server.hostname")+"<<<<<< New");
 public static void main(String args[])
 try
 HelloImpl storeServer = new HelloImpl();
 int port=Integer.parseInt(SERVER_PORT);
 String host=InetAddress.getLocalHost().getHostAddress();
 java.rmi.registry.LocateRegistry.createRegistry(port);
 if(MULTIPLE_BIND.equals("true")){
 for (int i = 0; i < hostList.size(); i++) {
 System.out.println(hostList.get(i).toString() + " <<<<IP" + i);
 Naming.rebind("//"+hostList.get(i).toString()+":"+port+"/STORESERVER", storeServer);
 }else{
 Naming.rebind("//"+host+":"+port+"/"+"STORESERVER", storeServer);
 MyHelloServer.MyThread thread= new MyThread(":"+port+"/"+"STORESERVER", storeServer);
 System.out.println("Remote Server started.....");
 catch (java.net.MalformedURLException me)
 System.out.println("Malformed URL: " + me.toString());
 System.exit(0);
 catch (RemoteException re)
 System.out.println("Remote exception: " + re.toString());
 System.exit(0);
 catch (Exception e)
 System.out.println("Error: " + e.toString());
 System.exit(0);
 static class MyThread extends javax.swing.JPanel implements ActionListener{
 String str="";
 HelloImpl impl;
 public MyThread(String text,HelloImpl storeServer){
 this.impl=storeServer;
 str=text;
 int timetoWaitForCheck=15000;
 javax.swing.Timer timer = new javax.swing.Timer(timetoWaitForCheck, this);
 timer.start();
 public void actionPerformed(ActionEvent ae)
 startTest();
 // Rebind
 for (int i = 0; i < hostList.size(); i++) {
 try {
 Naming.rebind("//"+hostList.get(i).toString()+str, impl);
 } catch (RemoteException e) {
 e.printStackTrace();
 } catch (MalformedURLException e) {
 e.printStackTrace();
}

Entire environment on one machine with zones

I've been pondering some of what zones can do, and it occurred to me that one could build an entire reasonably secure environment using one machine with multiple zones...
* Global zone with no network ports active, console only
* One zone for firewall, heavily ipf'd - mapped to external and internal network ports
* One zone for webserver - mapped to internal network port
* One zone for fileserver - mapped to internal network port
* Other zones as needed - probably all mapped to internal network ports
* All zones secured with ipf to allow very little access, particularly from firewall zone
It seems like this would allow a very flexible environment, and would give the security of having multiple boxes.
Thoughts/Comments?

I've been pondering some of what zones can do, and it
occurred to me that one could build an entire
reasonably secure environment using one machine with
multiple zones...
* Global zone with no network ports active,
ve, console only
* One zone for firewall, heavily ipf'd - mapped to
to external and internal network ports
* One zone for webserver - mapped to internal
nal network port
* One zone for fileserver - mapped to internal
nal network port
* Other zones as needed - probably all mapped to
to internal network ports
* All zones secured with ipf to allow very little
tle access, particularly from firewall zone
It seems like this would allow a very flexible
environment, and would give the security of having
multiple boxes.
Thoughts/Comments? You are definately on the right track. If I haven't said it before, I will say it now - All services that can be, should be run in a zone. That means web servers, DNS servers, LDAP, file servers, etc. Between zones and least privilege (you are using least privilege aren't you), you can create a very secure and contained service environment.
Imagine the surprise of a script kiddie when by pure luck they compromise your zone, but sadly they can't install their favorite rootkit because /dev/kmem, /usr, /devices, etc. are completely off limits no matter how much they scream about having UID 0. Remember, this is even more secure than having multiple boxes; this is like having multiple boxes where root ain't root. The best part is that zones are cheap. You can create them at will without performance impact, and can limit resource usage via a number of different means.
There is a new paradigm in town and it's name is Zones. Use zones and use them often. This is a no lose proposition.
Happy zoning.
Thanks,
Jarod

Install SSL certificate - OS X Server 10.8.2

Greeting All,
I am using OS X Server 10.8.2 with Server.app 2.2 and self-signed SSL sertificate. And I try use CA form Verisign.
I already success create CSR and get trial SSL certificate form Verisign. But I found I can't install SSL certificate correct and made it use in Profile Manager 2. When I check Profile Manager 2 in Server.app 2.2. I only see self-signed intermediate CA.
I check Apple on line guide and support site of Verisign but not found any latest guide of how to install it in Server.app. Any advice is welcome.
Thanks,
Spin

If you purchased the SSL certificate, you have to convert the certificate to "PEM"
https://www.sslshopper.com/ssl-converter.html

Any easy way to install SSL certificates

Hello
is there a easy to install SSL certificate on ASA, rather than enroll with a public CA? ASDM has a place to import certificates. Can I just upload a SSL certificate I got from my CA to ASA, withou setup CA enrollment? And if yes, how can I generate a SSL certificate request from my ASA 8.2?
Thanks a lot

Hi,
As for generating a certificate signing request, you might want to check the following:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00808b3cff.shtml
HTH

Can I install ssl certificates in Firefox for android 4.0 tablets?

I need to Know if I can install ssl certificates in Firefox for android 4.0 tablets?
I did it with the laptop Firefox for windows 7 and I am using al time but I need to travel with my samsung tablet and use my ssl certificate to acces my bank account. I dont know if the android version of firefox have advance options to configure my certificate.

Visit a website that provides the cert and then you should be prompted to install it. As of right now the feature is in Firefox Beta from the Play Store if you want a more polished version.

Installing SSL certificate on SAP J2EE Engine 6.4

Hi SDN,

We want to install SSL cetificate on one of our portals. What are the steps to be done? How do we go about this??

regards
Brahmachaitanya

Hi,
Before answering to your doubts,
Have you tested your SSL as per Page No:26 from the above document.
If It's positive, then your SSL is fine..no need to worry about anything.
You can customize the SSL connection across engine and subsequent navigation
as per page no:17 in the same doc.
after being done all the above positively
1) I am not able to find in the Trusted CAs, the private key that i created.
I'm afraid to answer this.however.... you said "I have also sent the CSR to the Certifiying Authority and I have got the Signed certificate back (i.e. .crt file)."
So, I assume that your SSL test works fine
may be you might need to check other section(like Trusted CA ..some other diffrent name) in the same Key Store for your private key info.
2) I have created the private key once and generated the CSR from it. I have also sent the CSR to the Certifiying Authority and I have got the Signed certificate back (i.e. .crt file). Now please tell me, DO I NEED THE PRIVATE KEY IN THE FUTURE FOR ANY OTHER PURPOSE?????
You don't have to know about private key in the future.
You just have to make sure that SSL certificate is appears during navigation in the browser for you to click "Yes". still if you want to know what is your private key, I think You need to try out fresh SSL config in any other system/engine.
( to get know more about SSL, visit SAP documentation in my first answer )
Hope that solves your doubts.

I need to share my Itunes library on one computer with two user accounts

I have one computer with two IPODS. I would like to share the music I already have stored on one library with another user library. How do I do this?

See if this helps: iTunes - How to share music between different accounts on a single computer
There are a few different ways to use two iPods with one computer, have a look at this help page for suggestions: How to use multiple iPods with one computer

HT201317 How do I use ICloud Photo stream on one computer with two differenet Apple Id's. My husband and I each have seperate ID's but one computer.

How do I use ICloud Photo stream on one computer with two differenet Apple Id's. My husband and I each have seperate ID's but one computer.

You have to have an iOS device (iPhone, iPad, iPod Touch) or Mac to create an iCloud account. However, if you tell your friend to create a shared photo stream and turn on Public Website, he/she will then be able to send you a link that will allow you to view the photos on the internet using your web browser. You would not be able to comment on the photos as this requires an iCloud account, but you would be able to view them.
You can refer your friend to this link for assistance with this: http://help.apple.com/icloud/#mmc0cd7e99.

Share calendar on two Ipads (one Imac with two users)

Hi community,
I'm looking for some help and where to look for if not here. Let me quickly describe my setup at home and what I try to achieve.
My partner and I have both their own iPad and iPhone. There is one iMac where we live. We are using it together but each of us has it's own user account on it and therefore it's own Itunes library. Both of us are using the iCal calendar on the iMac which we sync with our iPad and iPhone.
So there is one iMac with two users on it. Each user syncs his iCal with his iPad and his iPhone. What we would like to achieve though is that we can cross-share our iCal calendar. So that my partner can see my calendar items on her iPad and iPhone and vice versa.
We do not have a google mail (calendar) account nor are we using iCloud.
Every help is very much appreciated.
Legerea

Dear Dah,
I now have two iPads, which I also (need to) have separate AppleID's for. I understand I can share apps between them if I authorize iTunes on my iMac with both ID's, but I am not quite sure about the correct way to do that. I already have the iMac authorized for AppleID#1. If I go into iTunes and click on Store/Authorize this Computer... and enter my AppleID#2 information into Account name and Password boxes, does this authorize my iMac's iTunes for BOTH ID's or does it just change the authorization from ID#1 to ID#2?
If the former is correct, I understand the way to proceed is to xync up both iPads to iTunes and then I can drag and drop apps from one iPad's library listings to the other, right?
If this is not the correct way to get dual authorizations, what is?
Thanks!
pax / Ctein

Can we perform two actions with one button with two clicks one after other?

Sir,
can we perform two actions with one button with two clicks one after other?
I want that when I click an Add Button first time it add data to the database and when I click again this button it clear the form data to empty fields.
Regards
Tanvir

In code it should be easy.
The following code adds a button called butman with a text "ADD".
It then registers a listener that will be called if the button is clicked.
This listener then calls the runAddData method if you clicked on butman while it contained the "ADD" text and it will call the runClearData method otherwise.
Therefore it will swap the button's functionality between ADD and CLEAR on every click.
final Button butman = new Button("ADD");
butman.setOnAction(new EventHandler<ActionEvent>() {
 @Override
 public void handle(ActionEvent t) {
 if (butman.getText().equals("ADD")) {
 butman.setText("CLEAR");
 runAddData();
 } else {
 butman.setText("ADD");
 runClearData();
 } // END IF-THEN
 }});I hope this is what you wanted.
Some extra food for thought.
You might want to run the ADD and CLEAR methods in their own threads so that it can run in the back ground, without slowing down your user interface.
I also like to rather reuse one button for multiple functionality in stead of making an application with hundreds of nodes only used rarely with masses of code to show and hide them if needed.

Installing 2 ssl certificate on one machine with two virtual hosts

Similar Messages

Maybe you are looking for