Installing 3rd party backup client on 7310 with Fishworks

Greetings!
I am, admittedly, brand new to the Unified Storage platform. In fact, I don't even have the hardware fully up and running yet. However, one of my requirements for this system is backup. The backup solution at our institution is provided by Tivoli. My question is thus:
Is it possible to install a third party application that performs network backups on the Fishworks system? I've heard from product engineers at Sun that by doing so, we could potentially violate licensing agreements. I do know that they (Sun) don't generally allow the users to root these Fishworks systems. Anyone have any experience with either rooting the Fishworks box or installing third party apps?
Thanks in advance!
-Kermit Short

These storage appliances support the NDMP protocol (http://en.wikipedia.org/wiki/NDMP).
There is support for this in Tivoli too.
This probably would be the easiest solution without the need to mess with the warranty.

Similar Messages

Install 3rd Party Vendor Certificates for use with WebVPN - ERROR

I have windows 2008 R2 as CA Standalone Root. when i am generating the certificate request from cisco ASA and importing it in CA SERVER i am getting this error. please tell me i am using asa image 8.0.2 doing it in GNS3 and i have to implement it. however in windows 2003 servers the same request is importable.
ERROR: asn1 bad tag value met asn 267

hey guys the above issue was resolved. now i have following error.
1- anyconnect popup with WARNING MESSAGE: Warning: "The following Certificate received from the Server could not be verified: "
2- on asa i can see following debug messages.
CRYPTO_PKI: Sorted chain size is: 1
CRYPTO_PKI: Found ID cert. serial number: 02, subject name: cn=admin
CRYPTO_PKI: Verifying certificate with serial number: 02, subject name: cn=admin, issuer_name: cn=ciscoasa, signature alg: SHA1/RSA.
CRYPTO_PKI(Cert Lookup) issuer="cn=ciscoasa" serial number=02 | .
CRYPTO_PKI: Invalid cert.
do let me know why is this happening. i have installed both CA and Indetity certificates on cisco asa 8.4.
my client OS is Win7.

How can i install 3rd party software into my Mac with OS X Mountain Lion

Dear Experts,
I wish to install a software downloaded from a broadband service website (Yes, 4G broadband from Malaysia) for my 4G dongle to be able to work with OS X (10.8.1). But the system stopped me from installing it, as it said 'the installation file is not downloaded from App store and my security preference has stopped it'?!
I have my 4G broadband with me but can not be used :-(
**It works with my Macbook Air (OS X 10.6.8)

Right-click it and press Open to install that application

Can't sign in using any 3rd party email client with my iCloud account on any Mac. Tried every settings, My iCloud only works with Mail.app

Can't sign in using any 3rd party email client with my iCloud account on any Mac or any other Mac. My iCloud will only work with Mail.app. All the clients I tried work perfectly well as long as I sign in with somebody else's iCloud account. But mine won't work no matter the client (Postbox, Unibox, Airmail...) and no matter the computer.
I can access my account on iCloud.com, but I can't use email clients without getting error messages prompting me to check my password or login.
I was able to use those clients in the past but a couple of months ago I got logged out of Airmail and the issue started just like that!
I tried every possible mail server settings including the following:
IMAP information for the incoming mail server
Server name: imap.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 993
Username: The name part of your iCloud email address (for example, emilyparker, not [email protected])
Password: Your iCloud password
SMTP information for the outgoing mail server
Server name: smtp.mail.me.com
SSL Required: Yes
If you receive errors when using SSL, try using TLS instead.
Port: 587
SMTP Authentication Required: Yes
Username: Your full iCloud email address (for example, [email protected], not emilyparker)
Password: Your iCloud password

Those are the correct settings, and they work with any email client that supports Imap.
Try again.

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama).

After power down and a cold restart, I automatically restart in my Administrator Account. Running 10.8.4 with one Administrator account, one user account and one guest account. Recently downloaded and installed 3rd party software (Panorama). Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software. I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required. I deleted the Other account, powered down and restarted with the same result - opened in Administrator. I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
Any suggestions? Any thoughts? Much appreciate any help you might offer.
jtsinphl

Welcome to Apple Support Communities
Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login"

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

10.6.8 won't run on a PowerPC Mac.
10.6.8 also won't run the latest Java. Here's what version of Java you can run:
https://discussions.apple.com/docs/DOC-5532

Install 3rd party PDF iFilter for index PDF file as attachment in e-mail (msg)

I have called Microsoft Permium Support, base on the reply, SharePoint 2013 does not support to index a PDF file attachment in E-mail (msg) except 3rd party iFilter installed. And they finally told me how to edit Windows Registry for install the Adobe iFilter.
But, the Adobe iFilter is too weak to call large PDF files. So, I would like to install and try the Foxit PDF iFilter, but I cannot find an installation guide for this 3rd party ifilter with SharePoint 2013.
Does anyone here have the experience for Foxit PDF iFilter with SharePoint 2013 can help me?
I am not sure it is bug or feature in SharePoint 2013, but in case I still have to install 3rd party iFilter for index PDF file. I have no idea what is the out of box pdf file indexing support for.

You ca plan to use Foxit.
steps are nearly the same which we use in sharepoint 2013
1. We need to update registry for pdf . Registry value is {987f8d1a-26e6-4554-b007-6b20e2680632}
2. we need to install the foxit ifilter
Here are steps for same
http://support.microsoft.com/kb/2293357
3. run below command:
net stop spsearch4
net start spsearch4
net stop osearch14
net start osearch14
Check below:
http://bjarnegram.wordpress.com/2011/07/13/installing-foxit-pdf-ifilter-on-sharepoint-server-2010/

Why to use 3rd party ftp client

why not using the one in iweb?

There are 3 reasons to use a 3rd party ftp client:
1 - if you intend to use the freeiWeb SEO Tool to add Google Analytics, image alternate titles or other metadata to the site's files. This requires publishing to a folder first and you'll need a 3rd party ftp client to upload from there.
2 - if you intend on using a web site optimizer like Web Site Maestro which also requires publishing to a folder first.
3 - if you experience problems using iWeb's built in client. Some users have reported problems with iWeb's client and switching to a 3rd party client like the free Cyberduck solved their problem. Just a matter of need.
If you don't need to add metadata or optimize your site and iWeb performs as it's intended then there's no reason to use a 3rd party client.
OT

Prevent shockwave player from trying to install 3rd party software?

I am a sysadmin for a relatively small-ish enterprise (around 50-ish PCs). We have scripts which push out shockwave player to all our systems but when a user loads a page which requires shockwave, they get a UAC prompt because the player is trying to install 3rd party software (usually Google Chrome browser). How do I stop this from happening? Is there a command line argument I can set (preferable method) or some other centrally-managed method for turning this off? Thanks in advance.
M

I guess I am not explaining myself very well.
I am currently using the EXE full installer from the distribution page. The installation works very well and I can get it to run in "silent" mode to avoid interaction with the user. Once the installation finishes, and I load a web page which requires Shockwave player, I get prompted at that point to download/install Chrome. That is the part I would like to know if it's possible to stop, because all our users are getting UAC prompts and it's always because Shockwave wants to run some installer after loading. I had hoped that going to the distribution version (as opposed to the straight download from the Adobe.com home page) would resolve this but they seem to be the same version, which makes me wonder why I bothered to sign up for it in the first place.

What's the standard way to install 3rd party classes?

Hello,
Let's say I install my SDK in c:\jdk1.3_02.
Could anyone tell me the standard way to install 3rd party classes or sources so that I can import them in my source codes please? Thank you so much!

most of the projects I've seem organize source, binaries etc. in the following directory structure:
lib - external libraries
src - the actual source code
conf - configuration files
dist - created distributables
let's say you have everything in the d:\projects\myproject directory.
-> compile with
javac -classpath d:\projects\myproject\src
-> run classes with
java -classpath d:\projects\myproject\src

Where to install 3rd party packages

Good evening...
i just downloaded the regex package from jakarta (jakarta-regexp-1.2) and un-zipped to some directory on my harddrive.
but is that really what i wanted to do? where do you usually install 3rd party classes and their documentation?
i realize for distribution my application jar will have to include the jakarta-regexp-1.2.jar; this question is more about what's the best way to set-up the development environment. just wondering if there's some standard that i should adhere to make my life easier when using other people's libraries.

There are 2 jre's, C:\jdk1.2.2\jre is the one you want to develop with. The othere one is for windows and ie when they need to run a java program (don't worry about this one).
To setup the development environment, make sure that javac and java are in your PATH variable. I suggest making an environment variable JAVA_HOME=C:\jdk1.2.2 and setting your path to PATH=%JAVA_HOME%\bin;%PATH% . If you need an applet to use the 3rd party package, it's better to use the plug-in and point it to use the C:\jdk1.2.2\jre.
Good luck,
Bud

3rd party backup for EBS

Hi hussein,
Have you heard about 3rd party backup software that caters all kinds of apps and databases? It is working on the O.S. side
and does not interacts with RMAN. I am just wondering how can it be effective or reliable without using RMAN?
Are 3rd party OS backups supported by Oracle?
The name of the software is ecostream and its kinda cheaper backup solution. Something like 8,000USD.
Your comments is very much appreciated.
Thanks a lot,
Ms K

Hi,
What I mean is it is not same sa veritas, Is is a disaster recovery software. It copies the apps and db folder to another
server using OS copy then they can open the EBS at the other server just like Oracle DataGuard.Does it simply copy the files and let you open the application/database on the target nodes with no additional setup? I suspect there is any software in the market that can do this as there are other steps need to be followed before and after copying the application/database tier files to have a Data Guard.
They also use veritas for backup purposes but no RMAN. Have you heard something like this?This is possible (RMAN is mainly required for hot database backup).
Thanks,
Hussein

Bea Portal: Installing 3rd Party Portlets / cms portlets

Hi there,
I hope this question is not too silly, but I am new to Bea Portal
Server. How do I properly install 3rd party portlets, e.g. the
cmsportlets available for download on the developer page ?
I extracted the zip files and then there is an Ant-Script where one's
supposed to change some parameters according to ones installation. I did
this and then I ran Ant, which actually copied the files to the portlets
directory. This is already strange to me: can the EBCC just create new
portlets or can it do something like "import" resources that someone
else has developed?
Well, so even after running ant, the portlets can be seen in EBCC, but I
an not add them to my page.
Any idea how to move on ?
Thanks
Hinrich

Hi,
Did you have a chance to look into WebLogic Portal 8.1 SP3? Check out the new Library Services features, which includes versioning and simple approval:
http://e-docs.bea.com/wlp/docs81/adminportal/help/CM_MAN_LifecycleOV.html
We also provide a few ootb portlets that allow users to interact with the CM system. Let us know if you have additional questions.
Best Regards,
--alex

Installing 3rd Party Drivers

Is it possible to install 3rd party drivers during a Safe Boot?
If so, is it better?
I'm having trouble with drivers loading sometimes, and other times not ... seems to be having problems "around" "Login Window".
I use auto Login on Startup and Restarts.
Wondering if this could be a "when and where of installation" issue.
Guessing ... apologies for being vague ... particulars can be found on M-Audio's site Forum (if you're really interested):
http://forums.m-audio.com/showthread.php?t=3856
Stumped again ... this is a new replacement PCI audio card.

I got a Rev B Replacement card from M-Audio. It behaved the same way as before under 10.5.6, until I ran AppleJack.
I believe that cleared up the problems: M-Audio's v2.0.8 drivers don't install properly under 10.5.6... As I understand things, Ownership and Permissions need to be changed, and caches needed to be rebuilt. AppleJack under auto pilot did this relatively fast ... compared to how long its taken to arrive at a solution ...
Read more on my woes and Solution (page 5) at:
http://forums.m-audio.com/showthread.php?t=3856&page=5
Also replaced the PRAM battery.
Up and running fine to date with the Sonnet Tango USB/FW and Rosewill NIC PCI cards alongside.
Perhaps AppleJack could solve other 3rd parties driver's installation woes?

Authentication on PocketPC through 3rd Party SSO client

Dear community,
I am currently investigating into the possibility of authenticating a user on a PocketPC device through a 3rd party SSO client.
Does anyone have any experience in this ? What is the configuration effort is and what product was used ?
Thank you very much, best regards
Jochen

as an addendum to my post, I've seen that this can be done.
http://www.hardcopy.de/hardcopy/english/bsp_sap_neu_kz.php3

Installing 3rd party backup client on 7310 with Fishworks

Similar Messages

Maybe you are looking for