Installing 5.3 lightroom update error: check available space and write privileges etc

I have lightroom 5.2 installed without problems but when trying to install 5.3 update I get the above error message???

Elements install issues where are you choosing to install Photoshop Elements 13 too? What operating system are you using? How much disk space do you have available?

Similar Messages

CS3 Installation "check disc space and write privileges" message

I recently purchased a new desktop. I deactivated CS3 from my old computer (Windows Vista OS) and downloaded CS3 to the new(Windows 7 OS), After it shows 100% extraction, I get a "A problem occured while extracting some files. Check available space on your computer and write privileges for destination folder." Not sure what to do from here and Adobe does not offer any phone support for my archaic version of PS.
I tried out copying the downloaded ADBEPSHPCS3_WWE file to C:\ as suggested in a previous post, however to no avail.
Many thanks in advance to whomever might be able to offer assistance.

Thanks again for the replys....
Like I said, my desktop is new--I'm not a techno geek just yet, but it's an ASUS, Intel dual core, I've got 340GB of 372GB available on C:\ and 550GB of 550GB on D:\ ...Would space be an issue with these stats?? The product is downloaded, and when I go to start the instal, it looks like it's doing well at extracting the files and indeed I can access the setup.exe file, but when I try to open it, I get the Windows "Do you want to allow this program to make changes to this computer?" When I click yes, that window goes away, but nothing else seems to happen??

I am unable to install the creative cloud update - error 43 comes up at around 77%

I am unable to install the creative cloud update - error 43 comes up at around 77%. I'm a relatively new user.

WIthout proper system info and the detailed error report nobody can say much. Most likely you run out of disk space.
Mylenium

HT4623 im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

im having a problem updating my phone. it downloaded the first part but then when i hit install it says software update is not available at this time. what do i do ?

Does it say Try Again Later? If so, try again later. Worked for me on one device, later! 2 of my devices are being a bit more stubborn!

HT1688 I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.

I just tried to install the latest software update for an iPhone 5, and now the phone is stuck in recovery mode. Are there any options available to avoid going through with the recovery. This seems really lame.

No.
You must restore.

HT4623 This is the message I get when u try and install it. The update was made available at around 11 a.m today Wednesday September 18th I am on a wifi network and i took the time (about 20 or so minutes) to install, it seemed like everything was install

This is the message I get when u try and install it. The update was made available at around 11 a.m today Wednesday September 18th I am on a wifi network and i took the time (about 20 or so minutes) to install, it seemed like everything was installing but after the long installation wait it wouldn't allow me to download it

I had better success doing this:
Download iTunes 11.1. Connect your device to your computer and open iTunes. Select your device under the Devices heading in the iTunes' sidebar. Click on the Summary tab in iTunes' main window. Click on the Update button.

My hard drive icon has gone from finder. how do i check available space?

I normally check my available hard drive space by clicking on the icon hardrive in finder window. However in Lion its not there. where is it? How do i check available space?

Go to Finder Preferences (in the Finder menu) > General tab, make sure the item "Hard Disks" is checkmarked. Once it is, your hard drive's icon should appear on the desktop in the rightmost column.
You can also maintain a quickly viewable summary. In Finder, go to the View menu and select Show Status Bar. That will add a narrow area at the bottom of each Finder window. In that area will be shown the amount of free space remaining on the drive, as well as the number of items in that folder.

Authorisation error : Check user id and password

Hi,
Just out of the blues our production box started giving out this error " Authorisation error : Check user id and pwd" ..All the users are valid users and SLD and RWB in the Java GUI but the IR and ID do not log in...Has anybody faced this error before ..Any advise please..
-Teresa

> Hi,
>
> Just out of the blues our production box started
> d giving out this error " Authorisation error : Check
> user id and pwd" ..All the users are valid users and
> SLD and RWB in the Java GUI but the IR and ID do not
> log in...Has anybody faced this error before ..Any
> advise please..
>
> -Teresa
Hi Guys,
I restarted the J2EE and it solved all these issues..But my question is what would have triggered this as I haven't upgraded or added any patches...The only activity we did was to recycle our entire box recently..Thanks for the suggestions..I can't find the points icon..I would like to award you some..
-Teresa

I am trying to update Lr with but says ck disk space or write privilege.

Need to install new updates for light room so that I may move pictures from light room into Photoshop. But because I work with raw I need to install new updates 5.8, 5.9 so that I can move photos in and out of Photoshop from light room to work with them. But when I do I did reject a problem occurred while extracting some files check available space on your computer and the right privileges on destination folder. Can anybody assist me with installing the updates. What I have this same kind of problem if I went to the Adobe cloud cc? Is it allow you to see you are worth the time and money when you don't have a good constant Internet connection every day?
Thank you to anybody and all those it supply me with some assistance in this problem

Hi,
Cool, great place to live.
Just open the "This PC" or Explorer Icon and right -click on the "Desktop" Icon, click on the "Security" Tab and make sure that SYSTEM, Your User ID, and Administrators all have "Full Control".
Also, you will need at least 2GB of disk space spare to install, that takes into account the extracted msi's and the installation.
The other thing is, if it is the CC version, have a look at Error: "Failed to install" | Creative Cloud Desktop

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

I have a Mac book pro with 750 gigs of space but when I check the memory available it's telling me that I have 1.5 gigs of available space and that my scratch hard drive is full. When looking in the color code of storage it's all other consuming the space

Ok so I have a MacBook Pro that has 750 gigs of space but I keep getting an error message that my scratch hard drive us full. When I look at the storage it's saying that I have 1.5 available gigs of space and when I dig deeper it shows that it's not video, audio or document but it's other. What can it be and what can I do about it?

See here for answer about the OTHER which is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
See Kappys excellent note on the rest of “other” files taking up your space:
What is "Other" and What Can I Do About It?

Error: Check that sender and reciever has same contract and the same bindin

Hi,
I created a client proxy for a dot net web service. Configured logical port in soamanager tcode. Then tested the client proxy using the report program. It gives an error response like this:
- <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
- <s:Body>
- <s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/ws/2005/05/addressing/none">a:ActionNotSupported</faultcode>
<faultstring xml:lang="en-US">The message with Action 'http://tempuri.org/GetData' cannot be processed at the receiver,
due to a ContractFilter mismatch at the EndpointDispatcher. This may be because of either a contract mismatch (mismatched
Actions between sender and receiver) or a binding/security mismatch between the sender and the receiver. Check that sender
and receiver have the same contract and the same binding (including security requirements, e.g. Message, Transport,
None).</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
I recorded the request/response in SICF tcode. I took the request that is recorded there in SOAP UI tester, I get the correct response there. Only when i run the client proxy from SAP it gives the above error.
it would be great if any one has solved this before.
thanks in advance.
Regards,
Suresh.

Hi Selva,
Depending the ECC version you're on & the SP level, SAP note 1229690 resolves this problem.
Regards, Trevor

Can't update Photoshop CS5, Camera Raw, etc. after photoshop reinstall. Every time I try to update recive information - during download this update error apear. Finish and try again later. What to do, without Camera Raw update can't open image from my cam

As I mentioned, there is an error while trying to update photoshop, camera raw, etc. I receives message when you try to download the update, an error occurred. Exit and try again later.
What to do? Without Camera Raw update I can't open Raw files from my cameras. Guy from chat on adobe website just give me link for support website, it's ridiculous.

abdzi schrieb:
Hi,
Finally I made an update. I used download files from Adobe update pages (the same websites that were offline for few days), I couldn't do it automatically from PS CS5 application. Last problem is Adobe Extension update, can't do it automatically and manually becouse there are no update files for Adobe Extension CS5 for Windows (only for Mac). Most important is that my Camera Raw can open files from my cameras now. Thank You for your help.
Hey abdzi could you give a short explanation were you found which download files?? I have the same problem and realy need the Camera Raw update. Please!! Thank you

Help! I downloaded and installed the a security update for safari last night and after it rebooted my system quit recognizing my password and quit working, taking me to a utilities window.

I let my system download and install the latest security update for Safari yesterday, 28 Apr 14, and when it rebooted, it wouldn't let me login. Instead it took me to a utilities windown that allowed me to verify my h/d then told me it couldn't be repaired so I would need to save all of my documents (not sure how since it won't boot up) and reinstall OS X. Help!

terrelld,
if you’ve been making regular backups to date, then you could just restore from the last update which you’d made before installing the most recent Safari update. If you haven’t been making regular backups to date, you can try the method provided on this Apple page, in the “Instructions for backing up to an external hard disk via Disk Utility” section. If you’re not already making regular backups, then I’d highly recommend purchasing an external disk for use as a Time Machine backup destination once you’ve gotten this resolved, so that this sort of problem would be more easily resolved in the future.

Pls Help - ClassNotFoundException error - custom activity space and control

I am encoutnering the following error when I deploy and run my custom
Login Activity Space and Control to the Java 5.0.2 Portal. I have created a custom Java project and built successfully(I think) using Ant and have modified the customactivityspaces.xml file appropriately. I have checked that the custom jar file is in the portal.war and PORTAL_HOME\lib\java\ folder. Any help with this would be extremely appreciated.
Please let me know if I can provide more info.
Thanks.
46323     07-20     14:16:24     Fatal     UI Infrastructure     6000     5880 (main)     com.plumtree.uiinfrastructure.activityspace.ASManager.InternalLoadClasses(ASManager.java:497)     Fatal Exception loading lib file: stapleskiosklogin_java.lang.ClassNotFoundException: com.my.kiosk.login.KioskLoginControl_     at java.net.URLClassLoader.findClass(URLClassLoader.java:241)_     at java.lang.ClassLoader.loadClass(ClassLoader.java:516)_     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:460)_     at java.lang.ClassLoader.loadClass(ClassLoader.java:448)_     at java.lang.Class.forName1(Native Method)_     at java.lang.Class.forName(Class.java:142)_     at com.plumtree.openfoundation.util.XPDynamicDiscovery.GetClass(XPDynamicDiscovery.java:344)_     at com.plumtree.openfoundation.util.XPDynamicDiscovery.GetClassesForWar(XPDynamicDiscovery.java:266)_     at com.plumtree.openfoundation.util.XPDynamicDiscovery.GetInstancesFromLib(XPDynamicDiscovery.java:121)_     at com.plumtree.uiinfrastructure.activityspace.ASManager.InternalLoadClasses(ASManager.java:490)_     at com.plumtree.uiinfrastructure.activityspace.ASManager.LoadCustomClasses(ASManager.java:437)_     at com.plumtree.uiinfrastructure.application.AppWarmUp.Init(AppWarmUp.java:442)_     at com.plumtree.portal50.application.AppWarmUpServlet.init(AppWarmUpServlet.java:109)_     at javax.servlet.GenericServlet.init(GenericServlet.java:256)_     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:935)_     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:823)_     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3421)_     at org.apache.catalina.core.StandardContext.start(StandardContext.java:3609)_     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:821)_     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)_     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:579)_     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:700)_     at java.lang.reflect.Method.invoke(Native Method)_     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:252)_     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)_     at org.apache.commons.digester.Rule.end(Rule.java:276)_     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)_     at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1403)_     at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1550)_     at org.apache.xerces.framework.XMLDocumentScanner.scanElement(XMLDocumentScanner.java:1809)_     at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:949)_     at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:381)_     at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)_     at org.apache.commons.digester.Digester.parse(Digester.java:1567)_     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:385)_     at org.apache.catalina.core.StandardHost.install(StandardHost.java:803)_     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:442)_     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:399)_     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:718)_     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:358)_     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:166)_     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1196)_     at org.apache.catalina.core.StandardHost.start(StandardHost.java:738)_     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1188)_     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:347)_     at org.apache.catalina.core.StandardService.start(StandardService.java:497)_     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2190)_     at org.apache.catalina.startup.Catalina.start(Catalina.java:512)_     at org.apache.catalina.startup.Catalina.execute(Catalina.java:400)_     at org.apache.catalina.startup.Catalina.process(Catalina.java:180)_     at java.lang.reflect.Method.invoke(Native Method)_     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:203)

Thanks a lot for your help Julie! That worked.
I have a followup question. Now, I get the Login view even though I didn't include a login view in my custom activity space.
I am trying to develop the custom login activity space and don't want to display the default loginview and want to auto login. So I have created a custom activity space and a custom control. I am not sure if I have everything coded correctly yet. How do I make sure I don't display the login view if I go to my custom space directly?
What's the best way to do this? I am still trying to go through the PT code and understand it. Any pointers would be very helpful.
Additionally, for the custom activity space: do I need to extend PlumtreeAS or AActivitySpace ?
I have my code listed below:
package com.my.kiosk.login;
import com.plumtree.portalpages.common.uiparts.*;
import com.plumtree.uiinfrastructure.activityspace.*;
import com.plumtree.xpshared.htmlelements.*;
* Activity Space for Kiosk login.
public class KioskLoginSpace extends AActivitySpace // AActivitySpace or PlumtreeAS ??
     public static final String STR_MVC_CLASS_NAME = "KioskLogin";
     * @see com.plumtree.uiinfrastructure.activityspace.IManagedObject#Create()
     public Object Create()
          return new KioskLoginSpace();
     * @return
     public String GetName()
          return STR_MVC_CLASS_NAME;
     * @see com.plumtree.xpshared.activityspace.AActivitySpace#Init()
     public void Init()
          super.Init();
          //RegisterPage(new LoginDP());
          //RegisterModel(LoginModel.STR_MVC_CLASS_NAME);
          //IModel myModel = GetModel(LoginModel.STR_MVC_CLASS_NAME);
          //RegisterView(LoginView.STR_MVC_CLASS_NAME, myModel);
          // Register the control in this space
          RegisterControl(KioskLoginControl.STR_MVC_CLASS_NAME, null);
     * Determine whether or not the current user has the security
     * privileges necessary to view the requested page.
     * @see com.plumtree.uiinfrastructure.activityspace.AActivitySpace#CheckBasicAccess(String, String, boolean)
     public boolean CheckBasicAccess(String strPage, String strControl,
                                             boolean _bSameSpace)
          // All users are allowed to access this space
          return true;
     /* (non-Javadoc)
     * @see com.plumtree.uiinfrastructure.activityspace.AActivitySpace#GetStyleSheetLinks()
     public HTMLElementCollection GetStyleSheetLinks() {
          // TODO Auto-generated method stub
          return null;
package com.my.kiosk.login;
import com.plumtree.debug.*;
import com.plumtree.openfoundation.util.*;
import com.plumtree.openfoundation.web.*;
import com.plumtree.portalpages.browsing.myportal.*;
import com.plumtree.portalpages.browsing.myportal.mypages.*;
import com.plumtree.portalpages.common.login.*;
import com.plumtree.portaluiinfrastructure.login.*;
import com.plumtree.server.*;
import com.plumtree.uiinfrastructure.activityspace.*;
import com.plumtree.uiinfrastructure.application.varpacks.*;
import com.plumtree.uiinfrastructure.login.*;
//import com.plumtree.portalpages.browsing.login.*;
* This class handles the control logic for Store Kiosk login.
public class KioskLoginControl implements ILoginControl, IHTTPControl
     /** object name */
     public static final String STR_MVC_CLASS_NAME = "KioskLogin";
     /** Query String parameters */
//     public static final String PARAM_CREATE_ACCT = "createacct";
     /** MVC Objects */
     private AActivitySpace m_asOwner;
//     private LoginModel m_asModel;
     /** these need to be nulled out after execution. */
     private IWebData m_WebData = null;
     private IXPRequest m_xpRequest = null;
     private IPTSession m_userSession = null;
     * @see IHTTPControl
     * @param r
     * @param pageData
     public void SetHTTPItems(IXPRequest r, IWebData pageData)
//          In a given request, this method is called first.
          m_xpRequest = r;
          m_WebData = pageData;
     * @see com.plumtree.xpshared.activityspace.ILoginControl#SetRedirectForUseAfterLogin(Redirect)
     public void SetRedirectForUseAfterLogin(Redirect r)
          // In a given request, this method is called second.
          return;
     * @see com.plumtree.xpshared.activityspace.IControl#execute()
     public Redirect CheckActionSecurityAndExecute(XPHashtable arguments)
          // In a given request, this method is called third.
          if (PTDebug.IsDebugTracingEnabled(Component.Portal_Browsing))
               PTDebug.Trace(Component.Portal_Browsing, TraceType.Error,
                    "KioskLoginControl CheckActionSecurityAndExecute() creating redirect to the Kiosk subportal");
          // In a given request, this method is called third.
          if (PTDebug.IsInfoTracingEnabled(Component.Portal_UI_Infrastructure))
               PTDebug.Trace(Component.Portal_UI_Infrastructure, TraceType.Error,
                              "GuestSubportalLoginControl Execute() creating redirect to MarkAsGuestControl.");
          // Redirect to the MarkAsGuestControl to mark this session as a guest user.
          // redirect to myPage
          Redirect myRedirect = new Redirect();
          myRedirect.SetLinkCreateNewSpace(MyPageAS.STR_MVC_CLASS_NAME,
               m_asOwner);
          myRedirect.SetControl(SetPageControl.STR_MVC_CLASS_NAME);
          //int iId = mySession.GetSessionInfo().GetCurrentUserID();
          IPTSession mySession = (IPTSession)(m_asOwner.GetUserSession());
          int iId = mySession.GetSessionInfo().GetCurrentUserID();
          iId = -1 * iId;
          String sId = XPConvert.ToString(iId);
          myRedirect.AddControlArgument(SetPageControl.STR_PAGE_ID, sId);
          // Make this use a true 302 redirect
          myRedirect.SetIsHTTPRedirect(true);
          return myRedirect;
          //return null;
     * This method is used to determine if the guest user should
     * be redirected to their default page or to the login page
     * if a space is not specified.
     * @param RequestData
     * @return boolean true implies the guest should redirect to
     * login if no space is specified. Login is default.
/*     private boolean IsRedirectOnLogoutEnabled()
          ConfigVarPack vpConfig = (ConfigVarPack) m_asOwner.GetApplication().GetVarPackManager().GetVariablePackage
               (ConfigVarPack.VARPACK_ID);
          String strGuestRedirect = vpConfig.GetConfigValueAsString(
               ConfigConstants.AUTHENTICATION_SECTION, "RedirectOnLogout",
               ConfigConstants.VALUE_ATTRIBUTE);
          // default value
          boolean bResult = true;
          if ((strGuestRedirect != null) && (!"".equals(strGuestRedirect)))
               if (XPConvert.ToInteger(strGuestRedirect) == 0)
                    bResult = false;
          return bResult;
     // IMVCObject
     * @see com.plumtree.uiinfrastructure.activityspace.IManagedObject#Create()
     public Object Create()
          return new KioskLoginControl();
     // Methods from ILoginControl
     * @see com.plumtree.xpshared.activityspace.ILoginControl#DoGetSession()
     public boolean DoGetSession()
          // The interpreter should ask us for the session.
          // In a given request, this method is called fourth.
          // Attempt to login as the custom guest user here, rather than in GetSession()
          // so that if we are unable to connect, we can abort the login attempt.
          // Otherwise, we have no way of knowing in the PEI whether or not login
          // has previously failed, and we can get in an infinite loop.
          try
               //Add code to derive Kisok user name after Store lookup
               String strKioskUserName = "kiosk0000";
               String strKioskUserPassword = "";
               // Look at the request URL to determine what URL this user
               // is trying to access.
               // Switch strCustomGuestName to your first custom guest here
/*               if (XPStringUtility.IndexOf(m_asOwner.GetCurrentRequestURL(),
                                                       "firstsubportal") != -1)
               // Switch strCustomGuestName to your second custom guest here
               else if (XPStringUtility.IndexOf(m_asOwner.GetCurrentRequestURL(),
                                                            "secondsubportal") != -1)
               // Connect as the custom guest user
               m_userSession = PortalObjectsFactory.CreateSession();
               m_userSession.Connect(strKioskUserName, strKioskUserPassword,
                                        null);
          catch (Exception e)
               if (PTDebug.IsErrorTracingEnabled(Component.Portal_UI_Infrastructure))
                    PTDebug.Trace(Component.Portal_UI_Infrastructure,
                                   TraceType.Error,
                                   "Unable to connect to Kiosk user.", e);
               m_userSession = null;
               // Since we are unable to connect to our custom guest user, we do not
               // want to login right now.
               return false;
          return true;
     * @see com.plumtree.xpshared.activityspace.IControl#GetName()
     public String GetName()
          return STR_MVC_CLASS_NAME;
     * @see com.plumtree.xpshared.activityspace.ILoginControl#GetSession()
     public Object GetSession()
          // In a given request, this method is called fifth.
          if (null != m_userSession)
               LoginResult rReturn = null;
               try
                    // Login the custom guest user. This calls the login PEIs.
                    rReturn = LoginHelper.INSTANCE.AttemptLogin(m_userSession,
                                                                           m_asOwner,
                                                                           m_xpRequest,
                                                                           m_WebData);
               catch (Exception e)
                    if (PTDebug.IsErrorTracingEnabled(Component.Portal_UI_Infrastructure))
                         PTDebug.Trace(Component.Portal_UI_Infrastructure,
                                        TraceType.Error, "AttemptLogin() failed.", e);
               if (!rReturn.m_bSuccess)
                    if (PTDebug.IsErrorTracingEnabled(Component.Portal_UI_Infrastructure))
                         PTDebug.Trace(Component.Portal_UI_Infrastructure,
                                        TraceType.Error,
                                        "KioskLoginControl AttemptLogin() failed: " +
                                        rReturn.m_strError);
               if (null != rReturn.m_Redirect)
                    if (PTDebug.IsErrorTracingEnabled(Component.Portal_UI_Infrastructure))
                         PTDebug.Trace(Component.Portal_UI_Infrastructure,
                                        TraceType.Error,
                                        "KioskLoginControl AttemptLogin() return redirect ignored.");
          IPTSession userSession = m_userSession;
          // Null out the IHTTPControl data so we don't retain the memory after the
          // request is done (i.e. leak the memory)
          m_xpRequest = null;
          m_WebData = null;
          m_userSession = null;
          return userSession;
     * @see com.plumtree.xpshared.activityspace.IControl#Init(IModelRW)
     public void Init(IModel model, AActivitySpace space)
//          m_asModel = (LoginModel) model;
          m_asOwner = space;

Installing 5.3 lightroom update error: check available space and write privileges etc

Similar Messages

Maybe you are looking for