Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

This is related to another discussion that had a solution of using an unofficial 64-bit Apache, which is not permitted in my situation. The discussion is here: http://forums.adobe.com/message/3580001.
I’m having trouble running the Apache and ColdFusion services after connecting the two with wsconfig. I’ve tried replacing the 64-bit mod_jrun22.so with the 32-bit equivalent and the Apache service will then start, but the ColdFusion services error when loading the jvm.dll.
Anyone familiar with this?
Apache Web Server 2.2.22
ColdFusion 9
Thanks.

Looking into the same issue myself. Can you elaborate on this? Which version of the JVM did you upgrade to and did you configure it in the CF Admin to use that jvm?
Using the web connector, I get an error message that the mod_jrun22.so is not a valid win32 application.
Thanks

Similar Messages

Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
The server is brand new and it's a fresh install of Apache and ColdFusion 9.
Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
On closer examination of the Windows error log, I saw the following error:
The Apache service named reported the following error: >>>
httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
Any help would be much appreciated. I have spent hours trawling the Web for solutions.

I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
OK. Simple solution to this. I'll put it here for other peoples' reference.
To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
Hope this helps someone else out.

I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.

Bei aktalisierung erfolgt das download, nach ende Download kommt Fehlermeldung fehler beim Download (Installation nicht möglich, Versuchen Sie es später noch einmal.
Kennt jemand das Problem, was kann ich tun?
Harald Bässle
Emailaddresse: [email protected]

Hello,
I installed the newest Application Manager some updates seems to be installed now but extension manager CS5 5.0 update is not successful > error code U43M1D207. What I must do?
I this the right way t answer?
Whating for reply
Thanks
Harald
Von: R_Kelly
Gesendet: Freitag, 29. August 2014 03:41
An: Harald Bässler
Betreff: I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
I installed First time Photoshop CS5 on my new PC (operation system windows 8.1, 64 bit). Sie prpram runs without problems so far, only the update is not possible.
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in Photoshop for Beginners - View the full discussion <https://forums.adobe.com/message/6683157#6683157>

OBIEE 11.1.1.5 on windows 2003/2008-64 bit &certification matrix confusion

Dear Friends,
Please let me know that whether OBIEE 11.1.1.5 can be installed on windows 2003/2008 (64 bit) servers?
The reason is I could see 11.1.1.5 downloads for Windows/ Linux/solaris ...
But in the certificatiomn matrix (excel file - bi-11gr1certmatrix-166168.xls) when I look for 11.1.1.5+ i could see the supported platforms are solaris,HP-unix and Exa logic
but for 11.1.1.3+ i could see the supported platforms are windows/linux/solaris/HP-unix....
Same thing for supported browsers
11.1.1.3+ supports IE,Firefox whereas
11.1.1.5+ supports only safari
I really what to know where does the OBIEE 11.1.1.5 version fits in
11.1.1.3+
(or)
11.1.1.5+
which one i have to consider?
Please clarify
Regards,
DB

Hi,
OBI 11.1.1.5 is certified for Windows 2003/2008 64bit. The + (plus sign) must be interpreted as 'and above'. So Windows 2003 64 bit is certified for 11.1.1.3 and above (like 11.1.1.5).
With the release of 11.1.1.5 additional platforms are certified (like Solaris), those are listed as from 11.1.1.5 and above.
Regards

Error 0xE0000235 when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.

Unfortunately, Error 0xE0000235 occurs when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
I am installing the GV 800 GeoVision 32/64Bit 16CH Video Capture Card onto the server.
Please urgently assist.
Answer in clear English. Cryptic answers not welcome. Yes...I know you are an intelligent, highly valuable expert on the world's leading edge technology.

Hi, I'd like to inform you that the error code 0xE0000235 refers to "Error in WOW64". This can be caused by corrupted or incompatible driver of the Video Capture Card. Similar issue may also occur on other driver on other operating system and I don't think
this can be caused by SBS2008 blocking the driver.
I suggest you contact with GeoVision Technical Support (http://www.geovision.com.tw/english/4_0.asp) and see if their driver should work on SBS2008 and make sure that you have downloaded
latest driver from their site:
http://www.geovision.com.tw/english/5_2.asp
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps!
Sean Zhu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problem with inbuilt Solaris Apache Web Server v 2.0.58

Hi,
Set-up:
We are working on a custom application which works with the inbuilt Apache Web Server on the Sun Solaris platform. Here are the details of the versions of the various components involved:
Apache Web Server: Version 2.0.58
Platform: SunOS 5.10 Generic_127111-03
Our application is in the form of a shared library(.so binary) which is loaded into the Apache Web Server by mentioning the following directive in the Apache Web Server's configuration file (httpd.conf).
LoadModule at_module "/var/apache2/logs/sample/sample.so"
where, sample.so is our application's binary
and at_module is the name of the module.
httpd.conf file has been attached for your reference.
Attachments:
httpd.conf - Apache Web Server's configuration file.
sample-apache.cpp - Sample program which is showing the problem.
httpd.h - Apache Software Foundation's file which contains the structure "request_rec" that represents the current request.
Problem summary:
For each request to the Apache Web server, the server maintains a table of type "apr_table_t" which contains the header environment from the request. There is a structure "request_rec" maintained in the httpd.h file:
/** A structure that represents the current request */
struct request_rec {
/** The pool associated with the request */
apr_pool_t *pool;
/** Request method (eg. GET, HEAD, POST, etc.) */
const char *method;
/** MIME header environment from the request */
apr_table_t *headers_in;
In our case, when we try to retrieve the address of "headers_in", we get a NULL Value. Please refer to the attached "sample-apache.cpp" program. In this program, inside the access_checker() method, we try to retrieve the address of "headers_in" and get that as NULL:
extern "C" int access_checker(request_rec *r)
     FILE * fp;
     fp = fopen("/var/apache2/logs/sample.txt", "a");
     fprintf(fp, "\n r->headers_in = %u, r->method = %s", r->headers_in, r->method);
     fclose(fp);
     return OK;
Here is the output of the sample program after accessing the main page of the Web server:
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
r->headers_in = 0, r->method = GET
Though we are able to retrieve one member of the structure request_rec (method), we are not able to retrieve the address of the other member (headers_in).
Observation:
We made an interesting observation that when we used the same sample program with the inbuilt Apache 2.0.52 Web Server on Solaris, we were able to successfully retrieve the address of headers_in. Here are the details of the set-up which is working fine:
Apache Web Server: Version 2.0.52
Platform : SunOS 5.10 Generic_118822-30
Thus, there is something different which has happened between the Sun's Solaris Apache Web Server's versions 2.0.52 and 2.0.58 which is making it unable to retrieve the address of the request headers (headers_in).
I am requesting someone to kindly shed light on this difference and let us know if we need to change the way of retrieving the request headers for Solaris Apache 2.0.58.
Thanks,
Atul.

The only way you can achieve it is by running the web server to listen on port 80
Please change the port in your httpd.conf file for the webserver and restart it.
If any other processes are running/using on port 80 on that machine, then please stop them, otherwise you will not be able to achieve your requirement.
Arun

Installing Sun Directory Server on Windows Server 2008

Has anyone tried installing Sun Java System Directory Server in Windows Server 2008? I am trying to do this but get an error stating that nss3.dll is missing at configuration time.

Windows 2008 is not a supported platform for any DSEE release. Even if you get it working, Sun Support won't be able to help if you have issues.
This issue seems to have been reported on Windows 2000 with DSEE 6.0 too and one workaround is to remove the nss3.dll from c:\winnt\system32 or equivalent directory. Please note this workaround is not targeted at Windows 2008, so use at your own risk.
http://sunsolve.sun.com/search/document.do?assetkey=1-1-6680728-1
Winodws Native DS6.0/ISW6.0 Zip:error could not locate nss3.dll
Edited by: etst123 on Jan 29, 2009 10:39 AM
(added link to bug report)

Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT

Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software Engineer

Hello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve.

LCES 8.2 Turnkey Install on "Intel Core i7 CPU 920 @2.67GHz 3GB Ram Windows Vista Home 64 bit"

Installed Java 1.5 SE (jdk-1_5_0_16-windows-amd64.exe) then set JAVA_HOME in system variable and set path to JAVA_HOME\bin etc.
During the Turnkey installation process in the LC Configuration Manager screen, process gets stuck with ACL-LCM-999-032 error.
Log from Configuration Manager is below:
Also I can not start the Windows service from Services , tried to set user too to use to start the service but no success please help, I can not proceed further.
Note: I downloaded jboss-4.2.0.GA fresh just to check if I can atleast start the default Jboss container on this machine and I can "run -c all" with no error.
Thanks
-yog
[2008-11-28 21:18:34,910], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [57%, Verifying ports required by service JBoss for Adobe LiveCycle ES are available]
[2008-11-28 21:18:41,925], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [59%, Starting service JBoss for Adobe LiveCycle ES]
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express mode processing complete
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express task finished, true:false
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[100, 1/2 Express steps complete]
[2008-11-28 21:18:52,189], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[0, ]

I able to successfully installed LCES 8.2.1 on i7 CPU 920 @2.67GHz 6GB Ram Windows Vista Ultimate 64 bit with Oracle 10g (on same PC)
it takes about 6 min to start the JBoss ( I wonder why 6 min but happy atleast passed the installation step) without BAM deployed.
Yog

Need Help: TS130 Server and Windows Server 2008 R2 64 Bit Problems

I have 2 TS 130 Lenovo Servers with Xeon 3.2 Ghz CPUs and 16GB of memory. Installing ANY version of Windows 64 Bit after a couple of reboots will cause the system to blue screen. Once it blue screens it is impossible to get back into Windows.
Get this. Installing ANY version of Windows 32 bit works just fine on either machine. I have swapped out ram, hard drives, raid on raid off, updated BIOS etc and the same exact issue on both machines. I have swapped out media thinking maybe it was just a bad disk, but after 3 copies of Server 2008 R2 64 and 2 copies of Windows 7 Ultimate 64 and 3 copies of Windows 7 Professional 64 bit and THEN the same problem occurring over and over on BOTH servers.. well needless to say I am pulling mu hair out. These are ALL OEM copies by the way not burned copies.
I called Lenovo Thinkserver support as we are a partner, and their only suggestion was changing some legacy settings in the BIOS which of course has done nothing. I have changed every setting in the BIOS that I feel it could possibly be and still no joy.
Thinking it MAY have been a video problem, I have even went so far as to add new video cards to both machines and the problem still exists on both machines. All drivers are latest versions, and I am getting tired of getting everything setup, and then BAM BSOD.. I have been a tech for 25 years, and I have NEVER seen this issue on any machine ever..
As far as the BSODs, one time it will be the language pack error, next time something else, and the next time something else.. no way to nail down the problem.
I KNOW its a machine error, especially when 32 bit runs fine on either machine, but what it is I have no clue.
I am hopeful someone here has had the same issue and can tell me what they may have done to solve the problem. It is absolutely driving me up the wall....
Thanks in advance for ANY help or suggestions.
Mike at Mitek Computers

Never mind.. FINALLY found the problem. Even though I swapped out media etc as far as Server 2008 went, I always used the same COA key.. guess what... English media and Japanese key.... snafu on our OEM vendors end I suppose.
Anyway I was issued a new product/virtual key through Microsoft and it resolved the issue.... stupidest thing I ever saw...
Mike at Mitek

HT5634 I am running windows 7 home premium 32 bit and now how should i upgrade it to windows 8 pro 64 bit

I Am running windows 7 home premium 32 bit on my MBP late 2011 15".. But now i want to upgrade windows 8 pro 64 bit .. I got upgrade pack windows 8 pro with 32 bit and 64 bit .. As we all know that new boot camp only support windows 64 bit ... Soo how can i upgrade my windows 7 32bit to windows 8pro 64bit ... When i insert dvd it says that u r running 32bit of windows 7 and u can't upgrade to 64bit windows 8pro plz insert 32bit windows 8pro and reboot ...... Plz help me otherwise my windows 8 will be useless

Thanks for reply... But when i am trying clean install of windows 8pro 64 it says dat u can only upgrade it from the previous versions of windows ... As i told that i got an upgrade pack of windows 8pro ... Soo how can i install it directly ???

How To Install E-Business Suite Release 12.1.1 Media Pack On Windows Server

Hi Every body,
I am trying to install Oracle E-Business Suite Release 12.1.1 Media Pack on Windows Server
and hope to find guidance and answers to some points
1- which Windows Server Version would be better for this installation Windows Server 2003 or 2008?
-- Currently I have Windows Server Enterprise Edition 2008 SP2 32-Bit Update (2010-12-15).
2- Is it possible to run the installation on Windows 7?
-- My knowledge is that Oracle certified Windows 7 as an EBS client machine (means IE8) and Oracle certifies Server systems to run Oracle server applications and Databases.
and certifies desktop machines to run the client side applications So >>
3- If I do not need the Oracle support over my EBS , then is that means that I am free to successfully install and run the EBS on my desired system? or what is the importance of Oracle systems certification any way ? 4- I need a step by step installation guide for the version you recommend ?. -- >(The MOST important Point)
-- I am new to EBS world
5- If I completed the installation successfully then would I be able to login to EBS from the same machine ?
-- I am trying to install EBS on my Toshiba L500 Laptop which its resources is
(Processor Core(TM) i3 M330 @ 2.13 GHz
RAM 4 GB
HD 320 GB). and I want this Installation for both functional and technical learning.
I know guys this questions may cause headache to answer but I'd really appreciate your patience.

1- which Windows Server Version would be better for this installation Windows Server 2003 or 2008?
-- Currently I have Windows Server Enterprise Edition 2008 SP2 32-Bit Update (2010-12-15). The list of supported OS can be found in (Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]).
2- Is it possible to run the installation on Windows 7?
-- My knowledge is that Oracle certified Windows 7 as an EBS client machine (means IE8) and Oracle certifies Server systems to run Oracle server applications and Databases.
and certifies desktop machines to run the client side applications So >> No -- Windows 7 is certified as a client tier only (Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]).
3- If I do not need the Oracle support over my EBS , then is that means that I am free to successfully install and run the EBS on my desired system? or what is the importance of Oracle systems certification any way ? Certification means running your application/database on a combination of OS/Hardware so whenever you have an issue, Oracle support will be able to help in troubleshooting -- You need to run your application on a certified OS.
Current E-Business Suite Technology Stack Certifications
http://blogs.oracle.com/stevenChan/certifications.html
4- I need a step by step installation guide for the version you recommend ?. -- >(The MOST important Point)
-- I am new to EBS world Install 12.1.1 as per the document referenced above. Also, refer to:
Oracle Applications Installation Guide: Using Rapid Install
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121oaig.pdf
You can upgrade to 12.1.3 once you are done with 12.1.1 installation (12.1.3 cannot be installed from the beginning, and in order to have this release you need to install 12.1.1 first).
Oracle E-Business Suite Release 12.1.3 Now Available
http://blogs.oracle.com/stevenChan/2010/08/ebs_1213_available.html
5- If I completed the installation successfully then would I be able to login to EBS from the same machine ?
-- I am trying to install EBS on my Toshiba L500 Laptop which its resources is
(Processor Core(TM) i3 M330 @ 2.13 GHz
RAM 4 GB
HD 320 GB). and I want this Installation for both functional and technical learning. You can access the application from the same machine as long as you are using a supported OS (please see the two docs referenced above for the supported OS and browsers). All Oracle Apps 12.1.1 documentation can be found at:
Oracle Release 12.1 Documentation Library
http://download.oracle.com/docs/cd/B53825_03/current/html/docset.html
Thanks,
Hussein

What is required to install in remote desktop server services - windows server 2008R2 for VMs internet access ?

Hi!
I have a lab with a hyper-v host with windows server 2012 R2 (in workgroup).
I have many vms since Windows Server 2003 including WS 2012 R2.
My colleagues an I wan't to acess lab vms from desktop (windows 7 e 8) trought the internet.
My understanding this can be accomplished with remote desktop server services. What I need minimum
to install in version Windows Server 2008 R2 sp1 (enterprise edition) 64 Bits ? Best Regards
Best regards

you need a small VM, 2-4GB RAM that's internet facing in order to host RDWeb role which runs on IIS. users connect to the web page portal and login, and can launch an RDP session to whatever VMs you have. this requires you to obtain RD CALs.
you can also go with the RDGateway route but it's somewhat more complicated, requiring certificates.
in either case, you need a server with specific port forwarding to the internet through whatever firewall/proxy you have and licensing to go along with it.
it's much easier to just setup a VPN in my opinion.

Problems with RDP/RDC from Mac OSX to Windows Server 2008 on External IP

We have a customer that is using Mac and Microsoft's RDC for Mac to their servers.
They've just upgraded from Windows Server 2003 to 2008 and can't connect through RDP to their TS server on external IP.
Their servers is not in any domain and it work for them to connect to another Windows Server 2008 that is located in their office when they use internal IP.
The problem is that when using RDC to the external IP they get bellow:
"Remote Desktop cannot verify the identity of the computer you want to connect to. This problem can occur if:
The remote computer is running a version of Windows that is earlier than Windows Vista.
The remote computer is configured to support only the RDP security layer.
Contact your network administrator or the owner of the remote computer for assistance."
From here they can choose "Connect" as they did on the Server 2003 but now they get: "Remote Desktop Connection cannot verify the identity of the computer that you want to connect to.Try reconnecting to the Windows-based computer, or contact our administrator."
and is only able to choose "Ok".
I've changed the settings on the "configuration for host server for remote desktop sessions" under General from "RDP-Security Layer" to "Negotiate" and in this case I get a logon windows where i type in all my information click logon. Here I get another
error message which says something like: (We get it in Swedish). "Connection to the windows-based computer broke since there was a problem associated with the licensificationprotocol... Try to connect again" Where I can choose "Cansel" or "reconect"
but it just keeps poping up if i chose reconnect.
I've tried all settings in the TS server and there is not much to change on the RDP client. We have installed the server certificate on the Mac client but it didn't help.
We've also tried with CoRD and it works fine as RDP from a normal Windows based computer.
The only solution I've found on google is to use CoRD instead but we got problems with that connection since it keep crasching on our computer.
In my eyes the problem is on the security requirements that the RDC for Mac needs but I can't find any inforamtion on MS sites about it.
Greatfull for all tips and trix!

I too was having the problem same as everyone else. However, for me the problem all started when I replaced my SSL certificate that was used/selected in the Remote Desktop Session Host Configuration utility, connections, RDP-TCP Properties. The security
layer is negotiate and the certificate is the one selected on that screen. It was not licensing related.
The certificate had expired and I didn't believe I needed it. But turns out I did, so I had to generate and validate a new one using GoDaddy (though they specifically were not part of the problem). As my Terminal Servers (Remote desktop servers)
do not have IIS installed, I was a bit stumped on how to create a new certificate request. I finally found some instructions on how to create a certificate request using the MMC snap-in, advanced operations, create custom request. The template
chosen was "legacy key", and without boring the rest of the details that part was the root cause of my problem. The legacy key was not able to be processed correctly by the Mac RDC client. Neither the official 2.1.1 client or the 2.1.2 download.
The Terminal Server system event log was showing the following two errors, 36874 and 36888. The first one contained the best details and said: "An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites
supported by the client application are supported by the server. The SSL connection request has failed." Upon searching the internet for that, I found this page which described the legacy key problem:
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/3a2d2eec-000d-432a-abd7-6b965268c671
So, my solution most familiar to me was to use IIS and create the SSL certificate request, process that with my 3rd party CA, export the certificate with private key and then import that certificate into all of my terminal servers. Then using the session
host configuration tool, pick the new certificate and the problem was now solved.

Printing problem with Konica Minolta BizHub282 using RDP on Windows Server 2008 R2

Hello,
I have an office setup as follows: Local office IP adress scheme 192.168.201.x. There is a Konica Minolta BizHub 282 printer connected to the 192.168.201.x network as well as around 10 workstations running Windows 7. There are also about
10 additional teleworkers WHO DO NOT NEED print access to the Minolta 282. All of their data is on a cloud server. I have them setup to first connect to the cloud server using a RRAS PPTP VPN and then to start an RDP session to the separate
RDP server. The Konica Minolta works ??okay?? with the easy print services and until now, we have just dealt with the lack of features and the occasional print job that goes crazy and prints out 400 blank pages (btw, this is usually on Excel) or a job
that cuts off the margins even when you have it set to "fit to page" (this usually happens in Adobe.) When I originally set this up, I tried loading the native Konica drivers on the server, but there was no joy because I couldn't get it to
work using the native drivers. The problem at hand is a feature called "account track." This feature authenticates your print job by using an account code. If there is no code, the job just disappears. When I load the native
Konica driver, the ability to turn on this feature is greyed out (see below):
When I use easy print, the codes seem to go through, but as I mentioned earlier, sometimes the print job just goes insane. After researching this, it seems to me that there are two ways to overcome this if we can't turn off the account track feature:
1) Overcome the driver problem. I've tried both of their current drivers without success: VXL and Visual Postscript. When I login to RDP, the (redirected) Konica 282 printer is listed, but when I try to print, it fails due to the missing account track code.
I'm hoping that there is a registry hack to turn this feature on by default with the code or a driver version that works with RDP. They have a WHQL driver available, but it didn't work any better. Is there a way to report this issue to the WHQL labs? Maybe
I can light a fire under Konica's rear end and motivate them to fix the driver.
2) I saw one discussion where the guy installed the printer out in the clouds as a local printer. He seemed to have a site-to-site VPN, not a client-to-site VPN, so this worked. Is there a way to do something similar when the customer connects to the
VPN through standard "connect to workplace" setup? I tried pinging the Konica 282 from the server while logged into the VPN, but the printer could not be found.
3) I considered setting it up as a google cloud print prnter, but that would require everyone to setup a google account and add a layer of complexity.
Anyone else run into this and have a solution? If not, does anyone have any ideas on a solution or workaround?
Thanks,
Jeffery Smith

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Installing 64-bit ColdFusion with 32-bit Apache web server on Windows Server 2008 64-bit

Similar Messages

Maybe you are looking for