Installing 700 kernel - looking for Note
Hello all,
I want to install the latest version of the SAP kernel on a BASIS 700 system (not java!). I'm familiar with the process for 4.6/640 systems but just wanted to check for any notes in case there's anything different.
For the life of me I can't find any notes for 700. I'm after the equivalent to Note 664679 - Installing 6.40 kernel in SAP WEB AS 6.10/6.20 (https://websmp106.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=664679).
Any suggestions, or is the procedure still same as for the versions I mentioned?
Cheers!
Hi,
Yes, still the same...see also note 19466.
No SAP note specifically on installing 7.00 Kernel.
cheers,
Vincent
Similar Messages
-
Agent 10.2.0.3 install on OEL5 looking for OEL4 packages?
We are trying to install Oracle grid control management agent 10.2.0.3 on OEL5 x86_64. The install is looking for packages which are not contained in OEL5. It is looking for pdksh, openmotif21, xscreensaver. These packages are available for OEL4. How do I install the agent?
Please check the metalink certification.10203 agent is not supported against 64 bit OEL, it certfied only on 32 bit OEL.
-
Looking for note taking software to use with a graphics tablet
Hello folks,
I am trying to find a software that would allow me to interchangably use typing and writing/drawing on a graphics tablet smoothly.
I'm looking for something that would essentially provide a 'blank sheet of lined-paper' where i can quickly type what my professors are saying, as well as easily draw whatever they are drawing. Also, since I am studying engineering, I would need something that I can easily write math symbols and equations so I can use it as scratch paper.
At the same time, I am looking to save trees and money, as well as keep organized and simplicity when it comes to archiving.
I have tried Microsoft Word 2008's notebook view, and this is currently the closest thing to what I want, but it favors mostly the text side of what I want (of course), and isn't very good in the drawing part. It also isn't very smooth when I try to do practice math/physics/engineering problems on it, nor is it very good at drawing molecular structures (O-Chem)... but for the most part, it gets the job done. It is also a headache because when you zoom in a lot to make it easier to write (mind you, I am using a tiny macbook screen..), the title bar also zooms in, and ends up taking half of the screen, making zooming in practically useless. (the title bar is also locked, so even as you scroll down, it stays in the top half.)
I have also tried Adobe Acrobat Professional 7, where I simply made a blank notebook from some image online, and I use it as scratch paper. When it comes to drawing, it is very smooth, but it's a headache sometimes, because after writing something and pausing for a second or two, the pen tool automatically becomes a 'selector' tool, and so if i want to draw over what I previously wrote, it changes to selector and instead of writing over, it drags and drops the object around a bit. The tolerance for that is really high too, and i'd have to bring the pointer about half an inch or so before I can start writing something again. I also haven't given the text a try yet, but it lets me make collapseable text boxes, so that is good for further annotating my equations and drawings, but isn't very useful for a full-lecture class (i.e. biology)
I also don't even want to consider photoshop, because it's basically too powerful, and I don't want my laptop fans going off in-class (its SUPER loud when it happens...) and I need it to last the day.
So just a sum up:
I'm looking for a good note-taking software (for mac) that will allow me to smoothly use my graphics tablet AND be able to type.
MS Word '08 and Adobe Acrobat are close... but aren't quite to what I want exactly...
I have a Wacom Bamboo tablet and an '09 Intel-based MacBook.
Thank you in advance!I have had this same issue and found this program called NoteBook that allows you to type, and draw (write) notes on a variety of paper types, (lined, graphing, engineering,etc.) and it uses the .nb file type that allows you to save multiple "pages" inside one file in a sort-of "notebook" if you will. It works great, but has several minor disadvantages. I can't change the ink color, I can't change the tip thickness (other than the pressure sensitive option with my wacom graphics tablet), and it doesn't allow you to open pdfs or other documents to inscribe upon. All around though it has been wonderful. There are really no good note taking apps out there...
-
My boyfriend will be leaving for med school at the end of next month. I want to get him an iPad as a gift but before I buy it I want to know if there is an app that will work with a stylus for note taking. Specifically, I would like him to be able take digital notes while he is in class. Also the professors will email the pictures from the lecture so it would be nice to add the picture to the app and be able to sketch and make notes directly next to the picture. Does anyone know if there is an app that will do this?
Hi and welcome..
Handwriting recognition software but not sure if it's compatible with a stylus.
http://itunes.apple.com/us/app/writepad/id293033512?mt=8
Take a look at Evernote here too.
http://itunes.apple.com/us/app/evernote/id281796108?mt=8
Video re iPad 2 here available March 11th.
http://www.apple.com/
Carolyn -
Installing New Color Looks for Color 1.5 - Invalid Location?
Hi I downloaded the New Looks for Color 1.5 that Apple provided, which are basically new boxes for the Color FX tab in Apple Color 1.5.
In the installation instructions, it says to copy the folders into this location: /Users/username/Library/Application Support/Color/Effects/
The problem is, this location doesn't seem to exist. There isn't a folder called "Library" in the Users/username folder. When apple sent out Lion, did they change the way this path is structured or something?
I do find a "Library" folder in the root level of my boot drive. And it does have a folder in it called "Application Support," but there isn't a "Color" folder in it. Does anyone have any ideas where the real location is to install these files?
Incidentally, I did try looking in the Color FX Bin tab inside the Color FX room in Color for information. I tried searching in finder for any of the pre-existing Looks that are listed there, but they don't come up anywhere on my system...though they are there in the application. Perhaps the real file name is something different than is listed there?
Thanks!Click on the GO menu when in the FINDER. Between VIEW and WINDOW. Now, while clicking on that, press and hold the OPTION key. You will see LIBRARY APPEAR. Choose it.
-
Install gets stuck looking for /global/scripts/ac_media.js
My dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
JulieMy dad is older and has moved into a retirement home. He gave us his iMac G4. We have all of the original install discs (including the Mac OS X 10.2 operating system). My first problem is that he can't remember his password (even when we share his "hint" with him). Through a general Google search and on the Apple support site, I have read that I can restart the computer with the OS disc in it, holding the C key down and it will reinstall the OS and I can create a new password. My problem is when the install starts running, it seems to open the IE and the status bar indicates that the G4 is accessing the Apple site to search for files. The process gets stuck when looking for /global/scripts/ac_media.js. I downloaded that file from Apple onto a thumb drive, but didn't know where to copy it into my G4. Can anyone help me?
Thanks,
Julie -
Install freezes at Looking for OSX....
I'm tying to update a G5 PPC from 10.3.9 to 10.4. I purchased an general update DVD commercially but when I start the installation process the computer stalls out at "looking for OSX on this computer".
Disk utilities etc. check out fine & the computer meets all the requirements for Tiger so far as I can tell.
Thanks in advance for any suggestions.Thanks Paul, yes that should upgrade from 10.3.x to 10.4.
2Z691-5341-A
Compatibility eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD)
http://www.welovemacs.com/m9639za.html
But I wonder if yo might have a 2004 G5!?
Apple Icon at top left>About this Mac>More Info...>Hardware, list like this but not the Serial#...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1 -
Forte install hangs when looking for Java2 SDK
When running the "Forte for Java 4, Community Edition Setup" program under Windows ME, the installation gets as far as "Searching for suitable Java 2 SDK. Please wait .." then hangs.
I have the Java 2 SDK version 1.3.1 and Java 2 Runtime Environment Standard Edition 1.4.0 installed.
Any suggestions?
Thanks,
JohnGo to the Sun One Studio page here http://forte.sun.com/ffj/index.html and look in the FAQ/Installation for the solution to the hang.
-
Installed 12i DEV, Planning to install Vision Demo:Looking for Instructions
Hi Friends
We successfully installed 12.1 dev on Linux. Planning to install Vision Demo. Looking some instructions from experts
1) Current 12.1 dev installed with applmgr user.
2) Planning to install Vision with Oracle user.
3) Created corresponding folders etc.
4) Is it required to stop all the services with applmgr user?
5) Any suggestions from experts.
Edited by: sk123 on Dec 20, 2009 5:53 AMHi;
We successfully installed 12.1 dev on Linux. Planning to install Vision Demo. Looking some instructions from experts
1) Current 12.1 dev installed with applmgr user.If you will make vision demo installation on same machine you can create one other user as applvis
2) Planning to install Vision with Oracle user.You can make installation as root user.Can create oravis user for db tier
3) Created corresponding folders etc.You can create folder as /u01/DEMO and give 777 to DEMO for installation
4) Is it required to stop all the services with applmgr user?If you are going to make installation on same linux server yes its better way to stop dev instance for make new installation more fast, other way you can have some performance problem
Regard
Helios -
Looking for Notes linked to a CustomObject1 return nothing
I am trying to get the notes linked to a CustomObject1, and I get only empty results.
I have created a note linked to a CustomObject1.
I have Exported it, in order to check that it was properly created and to get the row id.
I have Created a SOAP request like below:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns7742="http://tempuri.org"><SOAP-ENV:Body><NoteWS_NoteQueryPage_Input xmlns="urn:crmondemand/ws/note/"><PageSize>100</PageSize><ListOfNote><Note><NoteId>='AEFA-74XW77'</NoteId><OwnerId></OwnerId><ParentNoteId></ParentNoteId><ReadFlag></ReadFlag><SourceName></SourceName><SourceId></SourceId><SourceType></SourceType></Note></ListOfNote><StartRowNum>0</StartRowNum></NoteWS_NoteQueryPage_Input></SOAP-ENV:Body></SOAP-ENV:Envelope>
and I have received the following response:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns:NoteWS_NoteQueryPage_Output xmlns:ns="urn:crmondemand/ws/note/"><ns:LastPage>true</ns:LastPage><ListOfNote xmlns="urn:/crmondemand/xml/note"></ListOfNote></ns:NoteWS_NoteQueryPage_Output></SOAP-ENV:Body></SOAP-ENV:Envelope>
I have tried to use as filter the Subject and the OwnerId with the same empty results.
Could you please give me any suggestions
ThanksHi Enzo,
I think it's best if I reply to your previous message point by point:)
Thank you very much for your feedback, I think your point of view is pretty clear.
Moreover Your assumption is perfect and correct beside the very last two words, my idea consists in specifying the CO1Id value instead of the NOteId one.
[SD] Sorry about that
Actually I am a little bit disappointed because it is not possible to get every kind of Note.
[SD] Understood, we are working towards expanding our field and object coverage for WS
Anyway I have tried several tests just to try to understand how NoteQueryPage ws works.
1. Sending a note to a CRM user via message center (I was able to see the note via ws)
2. Replying back to the previous user (I was not able to see the note via ws)
3. Replying back again to the previous user (I was able to see the note via ws with ParentNoteId filled properly)
So I do not know why test 2 failed.
[SD] Which credentials did you use for this test? Perhaps you used the credentials of the user that was replying? If so, I don't believe you would see the Note.
4. adding a note to a SR (I was not able to see the note via ws)
5. subscribing to the SR note I have tryied again to create a note (I was not able to see the note via ws)
6. to the SR I have attached another note using a different user (I was not able to see the note via ws)
Basically, I was never able to see a note with fields: SourceName, SourceId and SourceType filled.
[SD] I was able to do this successfully, please try the following steps:
Login as UserA
1) Create a new CO1 record called MessageCenterTest1. Save.
2) Press the Subscribe button on CO1 record named MessageCenterTest1.
3) Add a note to MessageCenterTest1.
4) Query for all Notes (you should not see this note in the results, nor should you see it in your message center via the UI)
5) Logout.
Login as UserB
6) Add a note to CO1.
7) Query for all Notes (using UserA credentials), this note should now appear in the result with the SourceName, SourceId and SourceType fields filled.
QUERY:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns7742="http://tempuri.org"><SOAP-ENV:Body><NoteWS_NoteQueryPage_Input xmlns="urn:crmondemand/ws/note/"><PageSize>100</PageSize><ListOfNote><Note><Subject></Subject><NoteId></NoteId><OwnerId></OwnerId><ParentNoteId></ParentNoteId><ReadFlag></ReadFlag><SourceName></SourceName><SourceId></SourceId><Note></Note><CreatedBy/><SourceType></SourceType></Note></ListOfNote><StartRowNum>0</StartRowNum></NoteWS_NoteQueryPage_Input></SOAP-ENV:Body></SOAP-ENV:Envelope>
RESPONSE (trimmed a bit for brevity):
<?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns:NoteWS_NoteQueryPage_Output xmlns:ns="urn:crmondemand/ws/note/"><ns:LastPage>true</ns:LastPage><ListOfNote xmlns="urn:/crmondemand/xml/note">...<Note><NoteId>1QA2-RRF8C</NoteId><OwnerId>1-CWTEQ</OwnerId><Note>Added by userB</Note><ParentNoteId>1QA2-RRF8B</ParentNoteId><CreatedBy>UserB, 12/10/2009 22:11:32</CreatedBy><ReadFlag>N</ReadFlag><Subject>TestNote2</Subject>*<SourceName>MessageCenterTest1</SourceName><SourceId>1QA2-RRF6Y</SourceId><SourceType>Custom Object 1</SourceType>*</Note></ListOfNote></ns:NoteWS_NoteQueryPage_Output></SOAP-ENV:Body></SOAP-ENV:Envelope>
8) Query for all Notes (using UserB credentials), you should not see this note in the result set.
if there is not a way to get values for fields SourceName, SourceId and SourceType why they are defined in the wsdl?
[SD] See above steps
For these reasons I am saying the NoteQueryPage ws seems having bugs.
On web services documentation I did not find a word saying only a notes subset is accessible via Note ws.
[SD] From the WS User Guide (emphasis added by me):
"The note object stores information about *the notes available in the Message Center* in the Oracle CRM
On Demand application. The *notes can be sent from users or can store extra information (as a note)
on a parent object.* This allows employees who are working on a particular record to add extra
information as they see fit. For example, when talking to a contact, an employee might notice that
the contact is not happy with a service provided. The employee can record this information in a note
so that any other employees who talk to the contact are aware of the contact’s dissatisfaction.
The note object has no child components."
Finally I really do not understand why only some notes should be accessible via ws.
[SD] I think the source of the confusion is that the Note WSDL is actually an interface for Message Center specifically. There are other parent objects (i.e. Account) which do have a ListOfNote child which exposes all of their child notes via WS.
BTW: the message center is working perfectly...
[SD] Glad to hear it. One thing that I'd like you to consider is whether you see any discrepancies between the result set you are seeing via WS and the set of notes you see in the Message Center in the UI. These two sets of records should be the same. -
hi all
can someone send me the notes reagarding to cofiguration and how to use mrp.
i'll realy appriciate it
thanxHi Iqbal,
If by 'notes' you mean 'documentation', here is the standard SAP ERP documentation on MRP
[MRP|http://help.sap.com/saphelp_erp60_sp/helpdata/en/d0/7b528355af11d1a6280000e83235d4/frameset.htm]
Configuration documentation mostly exists within the IMG itself in the current versions of SAP ERP. However, version 4.6C R/3 has the IMG help online. MRP configuration hasn't changed all that much since 4.6C, so the following link would be a good starting point for you.
[MRP Settings|http://help.sap.com/saphelp_46c/helpdata/en/4c/72369adc56d11195100060b03c6b76/frameset.htm]
Regards,
DB49 -
Error when installing new iTunes, looking for administrator - but I am the administrator?
error 2426 appears, saying please log on as admin. I am the admin!
Hi,
Weird thing about outlook 2010 which I discovered is that it runs in less than an administrators permission. You have to right click on the icon and look inside to make it run as an administrator and you can make that permanent but it has some drawbacks. I assume that you are trying to delete or do something with the contacts that icloud couldn't sync. When you try to move them or delete them it says you don't have the permission. I ws working on another problem when I learned this by trial and error. Remember that Outlook can also run in safe mode by itself.
Anyway I don't know if that will help.
GR -
I have been using Dreamweaver for a short time now and
absolutely love it. Okay I've been looking for sometime now and
cannot find what I am looking for not sure if I'm just not looking
in the right place and could use some help and advice. I my
maincontent div area I would like to add something that I can post
news, either weekly or a daily basis I have found alot of weblog
programs, but what I am looking for is something simple. Hopefully
someone will be able to help me out here.
Thanks in advance for any info.>>the beer is optional :-)
Sez You!
Walt
"Nancy O" <[email protected]> wrote in message
news:g4r4d9$76$[email protected]..
> Not sure what you mean exactly.
> 1) Do you want to create and publish RSS feeds which
people can subscribe
> to?
> Or 2) do you want to have other people's RSS news feeds
appear on your web
> site?
>
> If 1)
> How to Create an RSS Feed with Notepad, a Web Server and
a Beer - the beer
> is optional :-)
>
http://www.downes.ca/cgi-bin/page.cgi?post=56
>
> RSS Specifications - everything you need to know about
RSS:
>
http://www.rss-specifications.com/display-rss.htm
>
> FeedForAll - feed generating software for win/mac:
>
http://www.feedforall.com/
>
> If 2)
> Feed Roll - javascript generator for including news
feeds in websites:
>
http://www.feedroll.com/rssviewer/
>
> Google Ajax feedfetcher - requires you to have a Google
API key#
>
http://www.dynamicdrive.com/dynamicindex18/gajaxrssdisplayer.htm
>
>
> --Nancy O.
> Alt-Web Design & Publishing
> www.alt-web.com
>
>
> "jvulga" <[email protected]> wrote in
message
> news:g4r2eu$rjm$[email protected]..
>> I have been using Dreamweaver for a short time now
and absolutely love
>> it.
> Okay
>> I've been looking for sometime now and cannot find
what I am looking for
> not
>> sure if I'm just not looking in the right place and
could use some help
> and
>> advice. I my maincontent div area I would like to
add something that I
>> can
> post
>> news, either weekly or a daily basis I have found
alot of weblog
>> programs,
> but
>> what I am looking for is something simple. Hopefully
someone will be able
> to
>> help me out here.
>>
>> Thanks in advance for any info.
>>
>
> -
I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.
I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on. -
I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.
Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.
Maybe you are looking for
-
When adding a new connector view I am receiving the following error message in the Meta-Directory console: Invalid directory server. Meta-Directory requires Sun ONE Directory Server 4.1 or higher. Please install and specify the correct version We are
-
Why can I no longer use an image for my signature on forms? The only option I have now is "use a certificate". It was never like this until today.
-
Oracle net manager in oracle 10g
Hi expert How can I define the odbc connection - host/access right, in oracle 10g? Like as in oracle 9i, it have orahome to set the odbc connection.. and then setting the net manager So how can I do the same way, to connect to oracle server via windo
-
Error when Call DS Smoke Test from Siebel.
Hi , I am trying to test the DS Smoke test from Siebel. I have configured as per the document. but when I click the Button "DS Smoke Test" button I am getting below error Error invoking service 'Policy Automation Determination Server', method 'Assess
-
I recently got notification that I have 4 app updates but when I try to update it says to verify my credit card information which I do but says it comes back as declined. Why would it try to pull funds for free app updates?