Installing 8i, Developer2000, Designer Failled again Help

I installed 8i on NT with Svc pack4. No Problem.
Installed Developer, added the IFWCM60.dll to orant/bin from the extras on the CD to fix a SVC pack 4 problem.
Problem - forms will not always respond. I am starting to think that Forms 6 does not work.
I started again, clean NT machine, Installed 8i, developer 6, patch 1 6.05.29.4. Made sure my TNSnames were OK and placed the same copy in orant/net80/admin, Changed SQLnet to OLD. When I try to invoke forms directly sometimes it connects sometimes it doesnot. If I bring up procedure builder first it will likely start when I click on Forms.
Installed designer, Installed the repository, everything works great except forms. Can not generate a module, Can not call forms from run with out the nt machine hanging up. When I generate a module, the generator never gets past initialization.
It all seems to point to forms can anyone point out that I am making an error or that I just does not work!
JJ
null

Hi,
If I've understood you correctly..you did install oracle 8i first...
If so..probably wrong.. see my reply to dave in Forms6i
First install Developer and Designer. Finally Oracle 815.
HTH
Martin

Similar Messages

  • Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I

    Can someone please help me re-install my Creative Design 5.5 on my Mac?  My MacBook Pro recently crashed and had to have the hard drive replaced.  The back up from Time Machine is not reinstalling the program.  Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

    Hi bodegakc,
    If you have the serial number then please use the below mentioned link to download the product you are looking for .
    CS5.5
    Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
    You can also use creative cloud cleaner tool before installing.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Thanks
    Nikhil Gupta

  • Hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,,

    hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say,, u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

    I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

    -> [[Firefox is already running but is not responding]]
    -> Profile in use
    * http://kb.mozillazine.org/Profile_in_use
    Check and tell if its working.

  • Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

    Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
    If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
    Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
    Hope this helps.
      Windows XP  

  • I want to delete OS X Lion and install OS X Snow Leopard again, can anybody help me with this?

    I want to delete OS X Lion and install OS X Snow Leopard again, can anybody help me with this?

    See Kappy's going back to SL from Lion guide.

  • Installed Adobe dlm add-on and now Firfox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME!

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/793259]''
    I installed Adobe dlm add-on and now Firefox will not open. I see the process starting in Task Manager but no window opens. Unistalled Firefox then re-installed but still no luck. HELP ME! I do not want to use IE! I presume it has something to do with Adobe DLM as ever since then it is not working.

    I had this problem for a couple weeks as well and it was extremely frustrating considering we use firefox for all our company tasks. Here is the solution:
    First of all if you have no bookmarks you want to save, then go directly to step 7. If you want to save your bookmarks first, then follow these steps.
    1. Shut down the computer
    2. Reboot and open firefox
    3. Go to Task Manager, right click firefox.exe, and click END PROCESS TREE
    4. WAIT 30 SECONDS! Then Double-click the shortcut to try and open firefox again
    5.Repeat steps 3 and 4 until firefox finally opens (trust me, eventually it will)
    6. Once it finally opens, backup your bookmarks,
    7. Download a copy of firefox from there website
    8. Uninstall from programs menu and make sure to check the box REMOVE ALL COMPONENTS
    9. install the new copy and BOOM! it works
    If it doesn't work, you're an idiot. If you don't want to reinstall firefox, then you're out of luck. Good Luck!

  • Can't install the sharepoint designer 2013 (32 or 64 bits) because of the "Office 15 click-to-run extensibility component"

    Hi there,
    I have a problem installing sharepoint designer 2013 which I downloaded .
    When I try to install the 64 bits installation program it it comes up with a popup that there are 32 bits programs found on my laptop. (Office 15 click-to-run extensibility component)
    When I try to install the 32 bits program of sharepoint designer it gives the same popup only that it found a 64 bits office program (Office 15 click-to-run extensibility component).
    What can I do to resolve this strange problem?
    I have a windows 8.1 laptop and use office as part of office 365.

    Hi GerritAikema,
    According to your description, my understanding is that you got an error when you installed SharePoint 2013 Designer 64-bit.
    Please uninstall the Office 15 Click-to-Run Extensibility component, then install SharePoint 2013 Designer 64-bit, compare the result.
    For uninstalling the Office 15 Click-to-Run Extensibility component, you can refer to the link:
    http://lennytech.wordpress.com/2013/08/10/uninstalling-the-office-15-click-to-run-extensibility-component/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Windows XP Clean Install – What I discovered and the help I need

    Windows XP Clean Install – What I discovered and the help I need
    I previously had a problem with my Laptop dying randomly you can read about it in the thread entitled Computer dies Randomly (Battery also dead) click to view
    Before I realised the solutions, I thought that maybe my Laptop had become infected with a Virus and decided it would be prudent to do a clean install of the Windows XP operating system.
    Everything went perfectly and thought a clean install was a good opportunity to download the “XP Service Pack 3” SP3 and did so, it seemed very quiet though and that’s when I realised I had no sound…
    I downloaded all of the sound drivers I could find on the Lenovo site for 3000 N100 (I knew from previous experience that the “SOUNDMAX” driver is the only one that actually works with this 3000 N100) in order to install this you have to install the Realtek HD audio driver, but in order to install that you have to install some other Driver/Soft that only works with SP1 or SP2 if you try to install it with SP3 it will say that you don’t need the file as your Service pack is newer than the file you want to install, this is understandable as SP3 is not final as of yet (but it’s good to know).
    My next problem was that my extra RAM was not detected, this was fixed by updating the BIOS, after installing all of the System updates, PC Doctor, everything I could find for 3000 N100 I decided to rest, I pushed the Lenovo care button and it did not work, I found a hot key driver and installed it but still the Lenovo care button does not work, previously when I pushed this button it would bring up the Lenovo menu but now it’s just a dead button, Does anyone know how to get this button working again?
    I am pretty sure that everything else is working fine now, just that button not working is very annoying, is there a set routing of installs you must do to get everything working, i.e. bios 1st audio 2nd system update 3rd etc...
    Please help, I hope I have helped you...
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Message Edited by DrunkenNinja on 05-07-2008 03:38 AM
    Solved!
    Go to Solution.

    Ok first everything works now... except the Lenovo Care button, I just posted the other stuff cause it might help other members,  I have searched the forum for an anwser to this problem but there was only one anwser (suggesting to uninstall the driver restart and re-install it) and it did not result in a working Lenovo Care button...
    I don't beleive the Lenovo keyboad drivers are in any way related to the Service pack 3 as they do not use the Service pack files, to back this up I also had the same problem when Service Pack 2 was installed...
    The Lenovo Care button works fine on Boot up screen to access the rescue and recovery software (So the mechanics of the button are fine) but once Windows XP loads it is just a dead button, I remember it used to open up the Lenovo Care Start bar, I got it working once in the past but I can't remember what I did, I thought someone here might know the anwser...

  • Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

    HELP!!!  I can't connect my iphone 3gs or my ipad2 since the 10.5 upgrade.  When I connect either of the devices my PC says the driver is being installed but then it fails.  HELP HELP HELP HELP!!! 

    Hi Tom,
    it's very well possible that something is wrong with the amount. I have 4 different DIMMs installed: 64, 128, 256 and 512MB. The one of 256 MB might be the problem, so I've decided to take it out and we'll see what happens.
    Meanwhile, I have to explain that my G4 has to 2 HDs, the original HD w/ OS 9.2 and a second bigger one w/ OS 10.5 (which doesn't want to start up again).
    With the original HD as startup disk, I can still boot in OS 9.2 and that gave me the opportunity to check on the memory. Well, what I found out is that the RAM-disk was turned OFF (for both HDs). At the same time I remember that in OS 10.3 I had a problem with time/date reset, something that always would occur after unplugging the power cable. I always assumed it was a dead battery but today I had the battery checked and it's still ok, so I figure it must be something else. Perhaps the RAM disc that is turned off? Shouldn't it be on?

  • Install extension to Design studio

    Hi
    I would like to know the install extension to design studio link under the design studio- Tools, when I select its popping up with choose installation source
    Location:HTTP://
    What is this Location? What we have to give here and why?
    Please help me out.
    Regards,
    Ramesh

    Hi Ramesh,
    add the below link to install sdk.
    http://www.mikehowles.com/designstudioutilitypack1.3
    Kind Regards
    MAD

  • ERROR: DW050:  - Acrobat Professional : Install failed (CS6 design

    ERROR: DW050:  - Acrobat Professional : Install failed (CS6 design & web Premium) win7 64bits
    ***************************************error message after installation failure***************************
    Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW065, DW066 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 3 error(s), 2 warning(s)    WARNING: DW065: Display requirements not met for {402F6F2E-5683-491C-977D-0CA599A07CAF} CS6 Design and Web Premium 6.0.0.0  WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0  ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------  ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.  ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.    ERROR: DW050: The following payload errors were found during install:  ERROR: DW050:  - Acrobat Professional: Install failed  ------------------------------------------------------------------------------------- 
    System Requirements

    Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  • Installing Light Weight Designer for ODI 10.1.3.4 on Linux

    Experts
    We have installed ODI 10.1.3.4 on Linux and we want the ODI Light Weight Designer setup part of it. We have deployed the application in a OC4J instance and updated the repository.xml , web.xml and snps_login_work.xml with the right JDBC datasource & work repostiroy details
    On launching http://<hostname>:7777/oracledilwd and trying to login with SUPERVISOR/SUNOPSIS we see below warning and we are unable to login further
    java:comp/env/jdbc/ORACLE_MASTER not found in Oracle Data Integrator LightWeight Designer
    Further in the opmn logs below error is seen:
    javax.naming.NameNotFoundException: java:comp/env/jdbc/ORACLE_MASTER not found in Oracle Data Integrator LightWeight Designer
    Please let help us here !
    Shankar

    Try to modify the data source definitio to remove the leading java:comp/env - this may resolve the issue.
    I kniow, that makes it non-standard JNDI, but sometimes, that's what has been implemented.

  • I can't seem to be able to re-install Elements 7. Can Anyone help me through this?

    Using Windows 7.  My software was corrupt (so I thought) so I uninstalled it ... and tried to re-install (several times).  It appears to install - although very quickly .... but it is not fully installed. Can anyone help me with this?

    I never got an error message.  I am using windows 7 .... un-installed by going to the control panel and using the un-install feature.  Whewn that didn't work ... I went to Computer/ OS(C)/Program Files(x86)/Adobe   ..... and deleted all remnants of Photoshop 7.
    I inserted the program software disc ... entered my serial number .... re-installed .... and it went through some sort of process .... put up a wierd icon on my desktop .... and when I click it ... it says ...
    Windows is searching for Photoshop Elements 7.0.exe.  To locate the file yourself , click Browse."
    I could not find a Photoshop EXE on my computer. 
    I ALSO tried to un-install (whatever was there .... and there were some files ... but no exe) .... using the installation disc to un-install.  Tried re0installing once again .... but no luck .... kept getting the same message.
    I  use Photoshop Elements DAILY .... and I thought it was corrupt because after taking a LONG time to load in my photo ...  it just wasn't working the way it should ...  this went on for a few days ... I re-booted my computer .... even turned it off completely for an hour or two ... hoping things would correct itself when I re-booted .... but it didn't.

  • Error encountered installing flash player, please try again later.

    MacBookPro 13" OS10.7.5    Have done 4 separate downloads over a couple of weeks, and get the same response each time I try to install. I have looked at help document and it has been no help. I currently do not have flash player installed. Tried to do the right click thing but show contents did not appear like Adobe showed. So I am stuck. Looked at response showing the mach kernel thing, do not know if that applies to me and seems beyond most average users of the computer. I am understanding why Steve Jobs stayed away from this mess. Thanks for any help you can give me.

    Hi sorry to hear you are having an issue with our website.   I would recommend clearing the cache and cookies in your web browser. 
    If you are using IE you can do the following
    1.  Open IE
    2. Click on Tools
    3. Select Internet Options
    4.  Then click on <delete> under browsing history, and put a check in all the boxes
    After it completes re-open IE and try it again.  
    Shamika_Vz Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Maybe you are looking for