Installing 9.2.0.1 on RedHat 9
Please can some one help me to find a step by step installation guide for Oracle 9i Standar on RedHat9.
And also here. It's not step by step, but does list the workarounds for all issues you are likely to encounter.
www.puschitz.com
Similar Messages
-
How Install Oracle 8.1.7 on RedHat 7.3
Hello!
I want install Oracle 8.1.7 on RedHat 7.3. I follow the steps in book InstallGuid, but when I run runInstaller, I get the error: map failed.
How can I install Oracle 8.1.7 on RedHat 7.3.
My email is: [email protected]
Thanks,
David Lin<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matt:
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<HR></BLOCKQUOTE>
I think 6.2 is easier, just follow read me instruction, on redhat 7.0 you must run patch to downgrade glibc from 2.2 to 2.1
null -
Problem in installing Oracle 8.0.5 in RedHat 6.1
Hi there,
Did any body installed Oracle 8.0.5 in RedHat linux 6.1. successfully
Its hell man.
1. I am not able to visit Oracle Web site, however I could able to visit all other web site
2. at the time of oracle installation, it gives error message unable to run svrmgrl
Any help is greatly appreciated
thanks
siva
nullHallo !
Three weeks ago I had successfully installed Oracle 8.0.5 on RedHat 6.1; some tips:
As described in ftp://ftp.oracle.com/pub/www/otn/linux/README download the five compaitibility RPMS
compat-binutils-5.2-2.9.1.0.23.1.i386.rpm
compat-egcs-5.2-1.0.3a.1.i386.rpm
compat-egcs-c++-5.2-1.0.3a.1.i386.rpm
compat-glibc-5.2-2.0.7.1.i386.rpm
compat-libs-5.2-1.i386.rpm
(I have got them from
ftp://ftp.tuwien.ac.at/opsys/linux/redhat.com/dist/old-releases/redhat-6.0/i386/RedHat/RPMS/
and install them.
The glibcpath.tgz is available from OTN. Install it as described in the ORACLE RAEDME.
Good luck !
Heinz -
Why can't install Oracle 8.1.7 in Redhat 7,1
Please see this page first: http://linuxfab.cx/indexEasy.php
if you really want to install, please run these files first:
compat-glibc-6.2-2.1.3.2.i386.rpm
compat-egcs-c++-6.2-1.1.2.9.i386.rpm
compat-libs-6.2-3.i386.rpm
compat-egcs-6.2-1.1.2.14.i386.rpm
and try again.Here's the easy way to do it.
1. Install EVERYTHING into your drive from Redhat 7.1; that's right choose 'EVERYTHING' when prompted at the 7.1 install.
(You need about 2GB to fit the 7.1 install plus the additional 2GB for oracle)
(Make a user named 'oracle' who will load and administer the database)
2. Type the following at the root command prompt:
groupadd oinstall
groupadd dba
groupadd oper
useradd oracle -g oinstall -G dba,oper
passwd oracle (it will prompt you for the password)
3. (Now let's make the directories and assign ownership starting from the root directory)
cd /
mkdir oraclestage
mkdir orahome
mkdir ora1
mkdir ora2
mkdir ora3
(the ora1,2,...etc should be mount points on different physical disks, but just make directories if you only have one disk)
4. (Now assign ownership to the directories)
chown oracle.dba /oraclestage
chmod 775 /oraclestage
chown oracle.dba /orahome
chmod 775 /orahome
chown oracle.dba /ora1
chmod 775 /ora1
chown oracle.dba /ora2
chmod 775 /ora2
chown oracle.dba /ora3
chmod 775 /ora3
(Next log out as root and log in as oracle using the password you assigned)
5. (Now set up environmental variables IF YOU SCREW THIS UP IT WONT WORK!!!SO PAY ATTENTION)
(Go into the place where user oracle's environment variables are kept...)
cd /home/oracle
more .bash_profile
(look at your .bash_profile file. You're going to replace it with the one below...
the easiest way to do this is to copy the contents of this file into Linux and save it as 'myfile', then place it in the /home/oracle directory. Then type:
cp myfile .bash_profile
at the command prompt. Say yes if asked to replace file)
Here's the file contents:
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
#PATH=$PATH:$HOME/bin
#BASH_ENV=$HOME/.bashrc
#export BASH_ENV PATH
#unset USERNAME
export LD_ASSUME_KERNEL=2.2.5
./usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
ORACLE_BASE=/orahome; export ORACLE_BASE
ORACLE_HOME=/orahome; export ORACLE_HOME
ORACLE_SID=ORCL; export ORACLE_SID
PATH=$PATH:/orahome/bin; export PATH
CLASSPATH=:/orahome/jdbc/lib/classes111.zip; export CLASSPATH
LD_LIBRARY_PATH=/orahome/lib; export LD_LIBRARY_PATH
umask 022
ORA_NLS33=/u01/app/oracle/product/8.1.7/ocommon/nls/admin/data; export ORA_NLS33
NLS_LANG=american; export NLS_LANG
5.1(notice the following lines:
export LD_ASSUME_KERNEL=2.2.5
./usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
These are designed to make oracle compatible with LINUX. The ./usr/i386...etc. is a script that has to fire off to make oracle 817 run off a backward version of the glibc library. If this script fails when logging into the box as user oracle, then run it from the command line after you get into the box. You may have to run it from root, but fire it off.
6. Get your oracle817 tar file and copy it to the 'oraclestage' folder. Log in as root and untar it to expand it. The command is:
tar xvf linux*...etc (whatever...)
7. Next get the jdk118_v3 file from http://java.sun.com and put that on in your user/local directory. As the root user, untar it and make a symbolic link as follows:
ln -s /usr/local/jdk118_v3 /usr/local/java)
8. Go back to the /oraclestage as user 'oracle' and do a 'cd Disk1' at the command prompt and then do a './runInstaller' from the prompt. Keep in mind that you have to be in xwindows for the latter to work. Put oracle into the 'orahome' directory. You don't need all the obnoxious 12-mile-long path statements, just put the thing into orahome.
That will get oracle817 going on your Redhat 7.1 box. It works for me. You don't have to deal with all that 'compat-glibc' loading shit. Just do an 'everything' install and it will work. Beside, what if you want to start using the box as a Linux box also? Do you want to keep searching for *.rpm files when you need extra functionality? Just throw them all in when you install.
null -
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matt:
Hi,
I am a newbie and would like to install Oracle 8.1.7 on RedHat Linux,
so RedHat 6.2 or RedHat 7.0
which one is the easier installation for
me(both new in Oracle & Linux)?
Many thanks,
Matt<HR></BLOCKQUOTE>
I think 6.2 is easier, just follow read me instruction, on redhat 7.0 you must run patch to downgrade glibc from 2.2 to 2.1
null -
Solution: Installing Oracle 8.1.7 on RedHat 7.1
I was having problems installing from the JRE included in the download so I
began to hunt around and to make a long story short, I've been able to launch
the installer using JDK 1.2.2. Below you will find the command line that I used.
First, the preconditions:
1) the JDK is installed at /usr/local/jdk122
2) the 8.1.7 tar is expanded to /oracle/tmp
The command line:
/usr/local/jdk122/bin/java -Doracle.installer.library_loc=/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/bin/linux -Doracle.installer.startup_location=/oracle/tmp/install/linux/.. -Doracle.installer.nlsEnabled="TRUE" -Doracle.installer.unixVersion=2.4.17 -mx100m -cp /tmp/OraInstall:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/OraInstaller.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/InstImages.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/InstHelp.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/oracleice.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/help.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/ewt.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/xmlparser.jar:/oracle/tmp/stage/Components/oracle.swd.oui/1.7.1.8.0/1/DataFiles/Expanded/lib/swingaccess.jar oracle.sysman.oii.oiic.OiicInstaller -scratchPath /tmp/OraInstall -sourceLoc /oracle/tmp/stage/products.jar -sourceType networkHello,
I tried to install Oracle 8.1.7 on Redhat Linux WS 2.1 and here is the make.log
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome1
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome1/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome1/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome1/lib ;\
/usr/bin/ar rv /home/oracle/OraHome1/lib/libn8.a /home/oracle/OraHome1/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
Any idea? -
Installing Oracle 8.1.7 on RedHat 7.2
Hi
I can't install Oracle 8.1.7 on RedHat 7.2 the machine I want to install it on is a P4.
when I execute runInstaller nothing happens
Please help meHi,
I found this reply which seems to address this issue, but I do not have time to try it out.
Can you try it and please let me know if it worked ?
The message is at :
Re: Some entries in update or insert missing
Regards
Kent -
Installing Oracle 8.0.5 on RedHat 7.0
Has anyone encountered problems installing Oracle 8.0.5 on Redhat 7.0. RedHat 6.2 installation works.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by david walker ([email protected]):
Has anyone encountered problems installing Oracle 8.0.5 on Redhat 7.0. RedHat 6.2 installation works.<HR></BLOCKQUOTE>
Should be OK. I was running that combination for a while and can't recall any serious issues during install.
I am currently running 8.0.5.1 on a Mandrake 7.2 PC. The install was pretty straightforward :
- Install compatability RPMs (I used slightly higher versioned RPMs than listed in the Oracle documentation);
- Install 8.0.5.1 s/w;
- Apply Oracle patch;
- Create dbs;
- Configure listener;
- Create the startup/shutdown rc script and links.
That's about it for the installation.
I haven't put the database to much use yet, so there may be other issues ahead :)
Oh, one thing to note on that last point is that you should have a look at how the /etc/rc.d/rc file operates.
Under Mandrake 7.2 it will look for a file in /var/lock/subsystem that has the same name as the /etc/init.d script before running the stop script correctly.
This differs slightly from what I see in the *8.1.7* documentation, so might be due to a difference between mandrake and the other distributions.
FWIW here is my /etc/init.d/oracle file.
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle databases
# Source function library.
. /etc/init.d/functions
CWD=`pwd`
# See how we were called.
case "$1" in
start)
su - oracle -c '. $HOME/.oraclerc && dbstart && lsnrctl start'
touch /var/lock/subsys/oracle
stop)
su - oracle -c '. $HOME/.oraclerc && dbshut && lsnrctl stop'
rm -f /var/lock/subsys/oracle
restart)
cd $CWD
$0 stop
$0 start
echo "Usage: oracle {start|stop|restart}"
exit 1
esac
exit 0
null -
Installing Oracle 8.1.7 on RedHat Linux WS 2.1
Hello,
I am trying to install Oracle 8.1.7 on Linux WS 2.1 and I am getting an error saying Error in invoking target ´ntcontab.o´ of makefile
and if I try to ignore I am getting a whole of error along these lines .. Please let me know how to resolve this issue. see below for my make.log file
Your help is highly appreciated!
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennfgt > nnfgt.c ;\
cc -c nnfgt.c ;\
rm -f /home/oracle/OraHome2/lib/nnfgt.o ;\
mv nnfgt.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/nnfgt.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nnfgt.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [nnfgt.o] Error 127
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome2/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
/usr/bin/make -f ins_precomp.mk links
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLDA.H)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.COB)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.COB)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SQLCA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f ORACA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f BNDDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; rm -f SELDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.h SQLCA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.h ORACA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlda.h SQLDA.H)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.cob SQLCA.COB)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.cob ORACA.COB)
(cd /home/oracle/OraHome2/precomp/public ; ln -s sqlca.for SQLCA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s oraca.for ORACA.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s bnddsc.for BNDDSC.FOR)
(cd /home/oracle/OraHome2/precomp/public ; ln -s seldsc.for SELDSC.FOR)
/usr/bin/make -f ins_net_client.mk nnfgt.o ORACLE_HOME =/home/oracle/OraHome2
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/gennfgt > nnfgt.c ;\
cc -c nnfgt.c ;\
rm -f /home/oracle/OraHome2/lib/nnfgt.o ;\
mv nnfgt.o /home/oracle/OraHome2/lib ;\
/usr/bin/ar rv /home/oracle/OraHome2/lib/libn8.a /home/oracle/OraHome2/lib/nnfgt.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nnfgt.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [nnfgt.o] Error 127
/usr/bin/make -f ins_nau.mk nautab.o ORACLE_HOME=/home/oracle/OraHome2 NAU_ADAPTERS="KERBEROS5 IDENTIX SECURID RADIUS "
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome2/bin/genautab "KERBEROS5 IDENTIX SECURID RADIUS " > nautab.c ;\
cc -c nautab.c ;\
rm -f /home/oracle/OraHome2/lib/nautab.o ;\
mv nautab.o /home/oracle/OraHome2/lib ; fi)
/bin/sh: cc: command not found
mv: cannot stat `nautab.o': No such file or directory
make: *** [nautab.o] Error 1
/usr/bin/make -f ins_rdbms.mk part_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kkpoban.o
make: /usr/bin/ar: Command not found
make: *** [part_on] Error 127
/usr/bin/make -f ins_rdbms.mk sdo_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kxmwsd.o
make: /usr/bin/ar: Command not found
make: *** [sdo_on] Error 127
/usr/bin/make -f ins_rdbms.mk ctx_on ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: /usr/bin/ar: No such file or directory
/usr/bin/ar cr /home/oracle/OraHome2/rdbms/lib/libknlopt.a /home/oracle/OraHome2/rdbms/lib/kciwcx.o
make: /usr/bin/ar: Command not found
make: *** [ctx_on] Error 127
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/home/oracle/OraHome2
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/home/oracle/OraHome2
/home/oracle/OraHome2/bin/genclntsh
/home/oracle/OraHome2/bin/genclntsh: ld: command not found
genclntst: error: could not locate /home/oracle/OraHome2/lib/clntsh.map
please generate the client shared library first
/home/oracle/OraHome2/bin/genagtsh /home/oracle/OraHome2/lib/libagtsh.so 1.0
/home/oracle/OraHome2/bin/genagtsh: ld: command not found
/usr/bin/make -f ins_sqlplus.mk install ORACLE_HOME=/home/oracle/OraHome2
rm -f sqlplus
Linking sqlplus
rm -f sqlplus
gcc -o sqlplus -L/home/oracle/OraHome2/sqlplus/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/sqlplus/lib/s0afimai.o -lsqlplus -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm -lpthread `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lpthread
/bin/sh: gcc: command not found
make: *** [sqlplus] Error 127
/usr/bin/make -f ins_oemagent.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o dbsnmp s0nmi.o -lclntsh -lvppdc \
-lnmi -lnmd -lnms -lnmsp -lpeer \
/home/oracle/OraHome2/network/lib/libtcl.a /home/oracle/OraHome2/rdbms/lib/defopt.o /home/oracle/OraHome2/rdbms/lib/ssdbaed.o -lclient8 \
-ltrace8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lcrypt -ldl -lm -lm
/bin/sh: gcc: command not found
make: *** [dbsnmp] Error 127
/usr/bin/make -f ins_precomp.mk relink ORACLE_HOME=/home/oracle/OraHome2 EXENAME=ott
Linking ott
/bin/sh: gcc: command not found
/bin/chmod: getting attributes of `ott': No such file or directory
make: *** [ott] Error 1
/usr/bin/make -f ins_net_client.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
/home/oracle/OraHome2/bin/echodo gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o trcasst /home/oracle/OraHome2/network/lib/s0nue.o -lntal8 \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib /home/oracle/OraHome2/rdbms/lib/defopt.o
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib -L/home/oracle/OraHome2/network/lib -o trcasst /home/oracle/OraHome2/network/lib/s0nue.o -lntal8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib /home/oracle/OraHome2/rdbms/lib/defopt.o
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [trcasst] Error 127
/usr/bin/make -f ins_plsql.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f wrap
Linking wrap
gcc -o wrap -L/home/oracle/OraHome2/plsql/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/plsql/lib/s0plsw.o -lpsa8 -lpls8 -lplp8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm /home/oracle/OraHome2/lib/libplc8.a -lpls8 -lclient8 -lnl8 -lnro8 -ln8 /home/oracle/OraHome2/rdbms/lib/kpudfo.o -lmm -ltrace8 -lgeneric8 -lcommon8 -lslax8 -lcore8 -lnls8 -ldbicx8 -lcore8 -lsql8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm
/bin/sh: gcc: command not found
make: *** [wrap] Error 127
/usr/bin/make -f ins_ldap.mk toolsinstall ORACLE_HOME=/home/oracle/OraHome2
rm -f ldapadd ldapbind ldapcompare ldapdelete ldapmodify ldapsearch ldapmoddn ldifwrite oidpasswd oidreconcile ldapaddmt ldapmodifymt
rm -f datagen bulkmodify
Building client shared library libclntsh.so ...
Call script /home/oracle/OraHome2/bin/genclntsh ...
/home/oracle/OraHome2/bin/genclntsh
/home/oracle/OraHome2/bin/genclntsh: ld: command not found
genclntst: error: could not locate /home/oracle/OraHome2/lib/clntsh.map
please generate the client shared library first
Built /home/oracle/OraHome2/lib/libclntsh.so ... DONE
gcc -o ldapadd -L/home/oracle/OraHome2/ldap/lib/ -L/home/oracle/OraHome2/lib/ -o ldapadd -L/home/oracle/OraHome2/ldap/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/ldap/lib/s0gslmod.o -lncrypt8 -lldapclnt8 -lncrypt8 -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [ldapadd] Error 127
/usr/bin/make -f ins_net_server.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
/home/oracle/OraHome2/bin/echodo gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -Wl,-rpath,/home/oracle/OraHome2/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -o tnslsnr /home/oracle/OraHome2/network/lib/s0nsgl.o /home/oracle/OraHome2/network/lib/snsglp.o \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -lpeer -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
gcc -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -Wl,-rpath,/home/oracle/OraHome2/lib -L/home/oracle/OraHome2/lib/ -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/network/lib/ -o tnslsnr /home/oracle/OraHome2/network/lib/s0nsgl.o /home/oracle/OraHome2/network/lib/snsglp.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -lnonc8 -lnl8 -ln8 -lnlsnr8 -lnlsnrc8 -lnsgr8 -lnmd -lnms -lncm8 -lnmsp -lpeer -lnro8 -ln8 -ltrace8 -lnl8 -lnonc8 -lnlsnr8 -lnlsnrc8 -lnmd -lnms -lncm8 -lnmsp -ln8 -lpeer -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [tnslsnr] Error 127
/usr/bin/make -f ins_rdbms.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f oracle mig dbv tstshm maxmem orapwd dbfsize cursize svrmgrl extproc hsalloci hsots hsdepxa osh sbttest imp exp sqlldr rman kgmgr loadpsp /home/oracle/OraHome2/rdbms/lib/ksms.s /home/oracle/OraHome2/rdbms/lib/ksms.o
rm -f /home/oracle/OraHome2/rdbms/lib/nmliblist
/bin/sh: /usr/bin/ar: No such file or directory
/bin/sh: cc: command not found
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [home/oracle/OraHome2/rdbms/lib/config.o] Error 127
/usr/bin/make -f ins_nau.mk install ORACLE_HOME=/home/oracle/OraHome2
chmod 755 /home/oracle/OraHome2/bin
rm -f oklist okinit okdstry
/home/oracle/OraHome2/bin/echodo gcc -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist snauk5pt.o s0nauk5l.o nauk5zl.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
gcc -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist -L/home/oracle/OraHome2/network/lib/ -L/home/oracle/OraHome2/lib/ -o oklist snauk5pt.o s0nauk5l.o nauk5zl.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 -lnbeq8 -lnhost8 -ln8 -lncrypt8 -lnidx8 -ln8 -lncrypt8 -lnus8 -ln8 -lncrypt8 -lnk58 -ln8 -lncrypt8 -lnldap8 -lldapclnt8 -lnsslb8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnoname8 -ln8 -lncrypt8 -lnrad8 -ln8 -lncrypt8 -ln8 -lncrypt8 -lnsid8 -ln8 -lncrypt8 -lntcp8 -lntcps8 -lnsslb8 -lnent8 -lntcp8 -lntns8 -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -ldl -lm -lpthread -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/home/oracle/OraHome2/bin/echodo: gcc: command not found
make: *** [oklist] Error 127
/usr/bin/make -f ins_otrace.mk install ORACLE_HOME=/home/oracle/OraHome2
- Linking otrcfmt
rm -f otrcfmt;
gcc -o otrcfmt -L/home/oracle/OraHome2/otrace/lib/ -L/home/oracle/OraHome2/lib/ -o otrcfmt -L/home/oracle/OraHome2/otrace/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/otrace/lib/otrcfmt.o -ltracefe8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 \
`cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -ltracept8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 /home/oracle/OraHome2/rdbms/lib/defopt.o \
-lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm /home/oracle/OraHome2/rdbms/lib/libknlopt.a -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [otrcfmt] Error 127
/usr/bin/make -f ins_rdbms.mk utilities ORACLE_HOME=/home/oracle/OraHome2
- Linking Import utility (imp)
rm -f /home/oracle/OraHome2/rdbms/lib/imp
gcc -o /home/oracle/OraHome2/rdbms/lib/imp -L/home/oracle/OraHome2/rdbms/lib/ -L/home/oracle/OraHome2/lib/ /home/oracle/OraHome2/rdbms/lib/impdrv.o /home/oracle/OraHome2/rdbms/lib/ssdbaed.o /home/oracle/OraHome2/rdbms/lib/defopt.o /home/oracle/OraHome2/rdbms/lib/libdbtools8.a -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` `if [ -f /usr/lib/libsched.so ] ; then echo -lsched ; else true; fi` -ldl -lm -ldl `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `sed -e 's/-ljava//g' /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lsql8 -lsql8
/bin/sh: gcc: command not found
make: *** [home/oracle/OraHome2/rdbms/lib/imp] Error 127
/usr/bin/make -f ins_rdbms.mk ioracle ORACLE_HOME=/home/oracle/OraHome2
/bin/sh: cc: command not found
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [home/oracle/OraHome2/rdbms/lib/config.o] Error 127
/usr/bin/make -f ins_ctx.mk install ORACLE_HOME=/home/oracle/OraHome2
gcc -o ctxload -L/home/oracle/OraHome2/ctx/lib/ -L/home/oracle/OraHome2/lib/ -o ctxload -L/home/oracle/OraHome2/ctx/lib/ -L/home/oracle/OraHome2/lib/ drz.o -lctxs8 -lctx8 -lzx8 -lgx8 -lctx8 -lzx8 -lgx8 /home/oracle/OraHome2/rdbms/lib/defopt.o -lclntsh /home/oracle/OraHome2/rdbms/lib/kpuadef.o `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lwtc8 -lmm -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lnro8 `cat /home/oracle/OraHome2/lib/ldflags` -lnsgr8 -lnzjs8 -ln8 -lnl8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -ltrace8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 -lclient8 -lvsn8 -lwtc8 -lcommon8 -lgeneric8 -lnls8 -lcore8 -lnls8 -lcore8 -lnls8 `cat /home/oracle/OraHome2/lib/sysliblist` -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib -lm `cat /home/oracle/OraHome2/lib/sysliblist` -ldl -lm -Wl,-rpath,/home/oracle/OraHome2/lib:/lib:/usr/lib
/bin/sh: gcc: command not found
make: *** [ctxload] Error 127Hello,
I tried to install Oracle 8.1.7 on Redhat Linux WS 2.1 and here is the make.log
/usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/home/oracle/OraHome1
(if [ "compile" = "compile" ] ; then \
/home/oracle/OraHome1/bin/gennttab > ntcontab.c ;\
cc -c ntcontab.c ;\
rm -f /home/oracle/OraHome1/lib/ntcontab.o ;\
mv ntcontab.o /home/oracle/OraHome1/lib ;\
/usr/bin/ar rv /home/oracle/OraHome1/lib/libn8.a /home/oracle/OraHome1/lib/ntcontab.o ; fi)
/bin/sh: cc: command not found
mv: cannot stat `ntcontab.o': No such file or directory
/bin/sh: /usr/bin/ar: No such file or directory
make: *** [ntcontab.o] Error 127
Any idea? -
Install Oracle 8.0.5 on Redhat 7x
Is it possible to install Oracle 8.0.5 on RedHat 7x? I see lots of posts for Oracle 8.0.5 on RedHat 6x, and Oracle 8i on Redhat 7x. Can it possibly be so simple that no discussion is needed? ;^)
cheers,
paulYes.
You need compat library rh 6.2
regards
peco -
Installing Apache-Weblogic Plug-in on RedHat 7.0
I am trying to install the apache-weblogic plug-in on redhat 7.0
I modifed my httpd.conf with the following lines:
LoadModule weblogic_module /usr/lib/apache/mod_wl.so
AddModule mod_weblogic.c
<Location /weblogic>
SetHandler weblogic-handler
PathTrim /weblogic
ErrorPage http://www.yahoo.com
</Location>
<Files *.jsp>
SetHandler weblogic-handler
</Files>
<Ifmodule mod_weblogic.c>
WebLogicHost 10.0.0.3
WebLogicPort 7001
</IfModule>
When I try 10.0.0.3/weblogic/ I get nothing!
Looking in my httpd logs it prints a 302 error!
Help
Kevin<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by david walker ([email protected]):
Has anyone encountered problems installing Oracle 8.0.5 on Redhat 7.0. RedHat 6.2 installation works.<HR></BLOCKQUOTE>
Should be OK. I was running that combination for a while and can't recall any serious issues during install.
I am currently running 8.0.5.1 on a Mandrake 7.2 PC. The install was pretty straightforward :
- Install compatability RPMs (I used slightly higher versioned RPMs than listed in the Oracle documentation);
- Install 8.0.5.1 s/w;
- Apply Oracle patch;
- Create dbs;
- Configure listener;
- Create the startup/shutdown rc script and links.
That's about it for the installation.
I haven't put the database to much use yet, so there may be other issues ahead :)
Oh, one thing to note on that last point is that you should have a look at how the /etc/rc.d/rc file operates.
Under Mandrake 7.2 it will look for a file in /var/lock/subsystem that has the same name as the /etc/init.d script before running the stop script correctly.
This differs slightly from what I see in the *8.1.7* documentation, so might be due to a difference between mandrake and the other distributions.
FWIW here is my /etc/init.d/oracle file.
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle databases
# Source function library.
. /etc/init.d/functions
CWD=`pwd`
# See how we were called.
case "$1" in
start)
su - oracle -c '. $HOME/.oraclerc && dbstart && lsnrctl start'
touch /var/lock/subsys/oracle
stop)
su - oracle -c '. $HOME/.oraclerc && dbshut && lsnrctl stop'
rm -f /var/lock/subsys/oracle
restart)
cd $CWD
$0 stop
$0 start
echo "Usage: oracle {start|stop|restart}"
exit 1
esac
exit 0
null -
Installing sun apps server 7 on redhat 7.3
Firstly I have redhat 9 so can I install the sunapps server 7 on redhat 9 ?
secondly
can I install sun apps server 7 on atleast redhat 7.3?
the document with sun apps says that I can install sun apps server 7 on 7.2
regards
MishraHey Paul,
I'm having problems just installing SUN ONE AS Standard Edition 7.0 on my Redhat 7.2 as ROOT. Did you not get any problems even starting it. It installed okay, but when I initially ran the script to start it (./asadmin start-appserv)... it kept crapping out. I did notice some JMS errors in the log, but I haven't come across any documentation on possible bugs. Thanks in advance,
Tak. -
Installing 10.2.0.1 on REDHAT 5.3 64 bit
Hello All,
What am I doing wrong with this installation? This is a straigh forward install, and for whatever reason, after I apply the 10.2.0.4 update (64 bit) I cannot get the listener to start at all.
Also, I attemped to install 10.2.0.1 on redHat 5.2 and I'm getting an unsupported platform message while OUI is doing it's pre-req checks.
Could use somehelp..
THX
RBThanks so much for your response. I did try to create using netca, same results. This is s true mystery. If I proceed and install 11g on the same server, create a test database, all works fine. When I install 10.2.0.1 and apply the 64 bit 10.2.0.4 patch, create the db, I get the following message when I try to start the listener:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=doc1.ccr.com)(PORT=1521)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
We are running this on VMware. I believe there is another person on this board going through the same thing. It's not VM, because I can revert back to a clean
Redhat 5 install and install 11g with none of these petering issues. What is wrong with 10.2.0.4? Installed on a clean redhat 64 bot host?
Robb -
HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!
I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
nullI'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null -
I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.
pls send the solution ASAP to my email id - ([email protected])Make sure you have IBM's Java 1.1.8 JRE/JDK installed on your server and $JAVA_HOME set. Check the Oracle installation instructions. One other problem with Red Hat 7.0. is that
there is a libc library incompatibility problem with Red Hat linux 7.0 and Oracle 8i. The database will not start after you install it. Go to MetaLink (if you have support) and search for document # 121176.1. Basically, you have to download an older version of glibc, modify your Oracle link environment files, re-link the database executables and all will work normally. I did it on my Red Hat Linux 7.0 server two weeks ago and everything is working fine. Only other alternative is downgrade to Red Hat 6.2. -
I am running my system with RedHat Linux 7.0 and tried to install Oracle 8.1.5.
I extracted jre required files and when i tried to start ./runIns.sh from install/linux directory it is giving me an error Unable to initalize threads: cannot find class Java/lang/Thread
Could not create JVM
i tried 3 times and i ended up here and i need instruction to sort out the problem as earlier as possible.pls do advice me in this.Oracle 8i is not compile/link time compatible with glibc 2.2. It
requires the glibc 2.1 compatibility SDK, i386-glibc-2.1-linux.tar.gz,
to install under systems based on glibc 2.2, like RedHat 7.0.
RedHat 7.0 ships with glibc 2.2. Oracle compiles with glibc 2.1. See the problem here? The good folks at valinux.com have created a compatiblitly SDK that will "fix" Redhat so you can install Oracle 8i. Go to the following link to learn more:
http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/readme.Oracle8i - This is the instructions for installing the patch. Return to this document at Step 4, where they tell you to "Install Oracle 8i." http://ftp.valinux.com/pub/support/hjl/glibc/sdk/2.1/i386-glibc-2.1-linux.tar.gz - This is the actual SDK.
null
Maybe you are looking for
-
How to Dynamically Hide-Unhide Report Details
Is there a technique to hide/unhide data? I am creating a report that summarizes transaction data. The users want the opportunity to review the details behind the summary as the report is being reviewed. Is there a way to hide the detail data while p
-
Mail Server suddenly stopped working
My mail server has stopped working, and I can't figure out why. This is a brand new MacMini with the latest Maverics Server (preinstalled) that I just setup last month. (We migrated from an Xserve running 10.6.) Up to this point, mail has worked flaw
-
I lost my zoom with 5 and can't get it back on 4; How do I fix this.
Firefox did an automatic downgrade to 5 which is unusably bad. I have corrected this problem by changing the update options and rolling back to 4 but my web pages will no longer zoom either from the view menu or from the mouse wheel or from the contr
-
Where or from which country should I buy an unlocked iPhone 5 that I would be able to use in Kenya and all other parts of the world? I am dying to get one, just don't know where to buy it from? (many threads here say most are unlocked for specific co
-
MonitorFor Processed XML Messages
Hi Eveybody, I have a little problem with my message. I uploaded my xml with Transaction CG3Z from my directory to SAP system. I saw the xml in AL1. After a few minute it disappears and when I go to SXMB_MONI and I execute for check the process. The