Installing 9.2.0.5 patch using new 10.1.0.2 installer

I'm installing the 9.2.0.5 Database patch on AIX 5.2. One of the requirements for installing this patch is to install the new version of the Universal Installer 10.1.0.2. When I install the new installer, it is put in the Database software home directory rather than the common directory used by the older installer version (2.2.0.18). My question is this, is the installer supposed to be installed in the same ORACLE_HOME as the database software, is it supposed to be installed in a new ORACLE_HOME, or is it supposed to be installed where the old installer resides on the server?

I scratched my head for a while and decided to put it into the old 9.2.0 ORACLE_HOME.

Similar Messages

Install RAC 11gR2 and Apply Patches with OUI New Software Updates Option

Has anyone tried the installation with the New Software Updates Option?
I will install 11gR2 RAC Grid and I plan to do the following steps:
1) Install Oracle Grid Infrastructure Patchset 11.2.0.2
2) Do all the configuration with OUI
3) Create ASM disks
4) Install Oracle Database 11.2.0.2 Software Only
5) Apply Oracle Recommended Patches 11.2.0.2.2 (12311357) and 12431716. (ref. MOS doc [ID 756671.1])
6) Create RAC Database (advanced option) with DBCA
With these steps:
Grid and ASM disks would be configured without the recommended patches, but the database will be created with the patches applied.
I would not like to do a "Software only" install of GI and then apply the patches because later I would have to manually do all the configuration steps.
If I use the OUI Software Updates Option to apply the patches, will OUI do all the patching and then let me configure GRID with OUI ?
Quote from Oracle® Grid Infrastructure Installation Guide 11g Release 2 (11.2) for Linux - Part Number E17212-11:
" Use the Software Updates feature to dynamically download and apply software updates as part of the Oracle Database installation. You can also download the updates separately using the downloadUpdates option and later apply them during the installation by providing the location where the updates are present."
I could not find more detailed information about this feature on documentation and MOS .
Thanks

Hi,
You can download Latest Updates And Patches Using using option -downloadUpdates
./runInstaller -downloadUpdatesYou can use this note:
*How To Download The Latest Updates And Patches Using 11.2.0.2 OUI [ID 1295074.1]*
Don't miss it ..
*Error: INS-20704 While Installing 11.2.0.2 with "Use pre-downloaded software updates" Option [ID 1265270.1]*
Note : Please make sure that user downloading the patches updates have the proper/correct permission to download the patch updates from MOS ( My Oracle Support).
Do not use the /tmp/oraInstall* directories for the download location. Unpublished bug 9975999
Documentation explaining ...
4.5.1 Running Oracle Universal Installer
Downloading Updates Before Installation
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH
Regards,
Levi Pereira

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?

Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown

I have an older MacBook Pro using 10.4.11 and want to use new operating system to use the latest iLife. Can i install 10.7 on an external hard drive and use the external hard drive to run new system while leaving my old system intact?

I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?

Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

The CC version will not activate with your perpetual CS6 license. Download the version from here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Your number should work with this version.

I have iTunes installed on a laptop that I use for work, but it's owned by my employer. A new policy my have them deleting iTunes from the machine. If that happens, will I lose all my music? I am an iCloud user and pay for iTunes match.

I have iTunes installed on a laptop that I use for work, but it's owned by my employer. A new policy my have them deleting iTunes from the machine. If that happens, will I lose all my music? I am an iCloud user and pay for iTunes match.

If they just delete iTunes, the music files should still be there. I suggest making a backup of them though. Locate your iTunes folder (The one that contains your library file) and just copy the whole thing to your Documents folder or wherever you like (Just not in the same directory of the original folder otherwise the computer will get confused and could confuse your iTunes library). Then you will have a backup of all your music, plus if you purchased it from iTunes, you will still have it linked to your Apple ID so you can re-download them to any computer with iTunes on it when you feel like it.

How to use new patch updates in track

Hi All,
I am a developer working in NWDI. We have everything in place and working fine upto now.
SAP has release a patch for the software component i am using in a track. Basis guys have updated the track and they confirmed the patch is updated successfully.
Now when ever i rebuild my DC, the changes are not effected as per the new patch. Please let me how I will be able to use new patch updates in my DC(In NWDS I can see the old source code only, I did all SYNC's and refresh but didnt worked, even NWDI is restarted)
How I can confirm that the patch is updated to track successfully, from a developer point of view.
I have access to CMS and CBS.
Regards,
Sateesh Chandra

Did you update your configuration in the studio?
--MLS

OutOfMemory while applying patch using OPatch

I`m apply patches...
About 10 of patches was successfully applyed...
But when I apply one patch I have an exception java.lang.OutOfMemory
does any have this trouble?
i have installed Oracle 9i Rel 2 on Linux

Hi Muba,
While applying this patch 16784403 & follow the post install task Step 4.1: Redeploy the new Forms EAR file (Conditional) of note 437878.1 after application of this MLR patch,4.2 Regenerate JAr files
do i need to stop all application services? as of this is OPatch, dont need to stop the application while applying this patch & post install step.
Please stop all application services and apply the patch. It is not mandatory you shutdown the DB, but if possible recommend to shutdown DB as well, and apply patch.
Then as post installation, regenerate JAR files using adadmin.
Thanks &
Best Regards,

Network admin install Adobe Acrobat X and patches

Ok so i have a brand new AIP. I run the Quarterly patch 10.0.1 by running the command: msiexec /a "D:\Adobe\AcrobatX10\AcroPro.msi" /p "D:\Adobe\updates\AcrobatUpd1001_Tier1.msp" next i try to run the patch for 10.1 and it says that the upgrade patch cannot be isntalled by the Windows installer service becasue the program to be upgraded may be missing or the the upgrade patch may update a different version of the program. this happens if I try the Q patch 10.1 right on to my newly created AIP. I followed the steps here exactly so what gives?
8 Administrative Installation Points — Enterprise Administration Guide

You are attempting to use the "old" Acrobat 9.x AIP logic of applying each update in order. That is no longer the logic used for AIP starting with Adobe Acrobat X and continuing with Adobe Acrobat XI. With Acrobat X and Acrobat XI now you install the base 11.0.0 and then apply the latest Quarterly Update (at this time those are versions 10.1.12 and 11.0.09).
Have a look at the ETK for more information on Enterprise level installation use cases and other very useful valuable information: Acrobat-Reader Enterprise Toolkit Home

SAP 720 - Use New Editor Problem

Hello Experts;
Today I installed sap gui 720 on my computer. I want to use special development properties at SAP when abap development. For example : Bold Select statement or case-when macros or yellow break-point etc.
But Now I'm not using new abap editor. I uploaded sap 720 4.patch and installed my computer. But nothing didnt change.
What will I do?
Thanks.

hello,
have you activated the new ABAP Editor? You can do this in SE80 via Utilities --> Settings --> ABAP Editor --> Editor. There you have to activate the radiobutton "Front End Editor (new)"

Installing ODBC requires newer version of the Univeral Installer

Hi, I need to install a newer ODBC driver for 3rd part software to connect to our new UTF-8 version of the database. I downloaded the version of ODBC I need, but when I try to install it I get an error saying I need a newer version of the Universal Installer. I've looked all over the site and cant' find a place I can just download a new version of the OUI. Any suggestions?

What version of the Oracle client are you using and what version of the Oracle ODBC driver are you trying to use?
I expect that the problem you're having is that Oracle changed the way that ODBC driver updates are packaged a couple years ago. Rather than being separate downloads, they included the ODBC driver updates in the Oracle client patchsets you can download from Metalink. That simplified life in that organizations that apply the full client patchset didn't have to separately install the ODBC driver updates. It complicated life in that if a client patchset updates the version of the OUI that is installed, the stand-alone install you can download from OTN requires the patched OUI which you only get by installing the client patchset from Metalink or getting a later version of Oracle that happens to include the later version of the OUI. Assuming your organization has a valid support contract, getting the client patchset from Metalink is most likely the way to go.
Justin

Guide to installing XP on your Mac without using Bootcamp (kinda)

Installation instructions for bootcamping your mac with XP
This method does not use the bootcamp utility in OSX
What you need:
A working bootable version of Windows XP SP2 ( see note below ) + product key
Bootcamp 2.1 drivers for Windows ( can be installed / copied from the original leopard installation disk under windows )
Windows XP SP3 installer
Apple HFS+ drivers for XP
note:          Using a clean version of the XP installation disk is preferable.. specifically the version that came with Service Pack 2 ( saves time installing services packs later ). Trying to use a unattended slipstream install of XP can result in a disk that cannot be read by OSX bios at boot. So save yourself some time and use a vanilla version.
warning:      Follow these instructions at your own risk. Any loss of data, bricking your computer or any other form of meyhem originating from using these instructions are at entirely your own risk. Have fun!
OK! lets get started!
Burn your windowsXP.iso to a CD/DVD using diskutil application under OSX
choose open ISO image in diskutil
right click loaded image and select burn ISO
( optional step ) reboot while holding down the 'option' key and confirm that OSX can read your newly created boot
Using diskutil partition your OSX hard drive
select the main partition and click the "+" to add a new partition
adjust the size of the partition as needed
set to format the partition to 'fat'
name parition 'Windows HD'
apply changes
Insert XP install disk and reboot
hold down the 'option' key as your mac chimes on restart
wait until your boot options are display ( you will see the Macintosh HD disk, Windows HD disk, and the XP installation disk )
using the arrow keys on the keyboard select the XP installation disk and hit enter
hit any key when the XP installation prompts you to begin installation
Proceed through the installation process
when prompted for installation location browse for the newly created partition from step 2 ( usually identified by partition type.. eg: fat, and size of the partition )
do not reformat the partition..   use it as is.
during the installation XP will reboot several times.. make sure you hold down the option upon each reboot of you mac.. however from now on select the Windows drive
enter in your product key when prompted.
complete installation and boot into XP for the first time.
Install XP Service Pack 3 ( proceed to step 6 if this installs correctly )
          note:           if you are prompted 'not enough space to install' do as below:
Click Start, click Run, type “regedit” (without quotes) and then click OK.
Locate and then click the following registry subkey:    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup
On the Edit menu, point to New, and click String Value.
In the text box under the Name column, type "BootDir" (without quotes) and press ENTER.
Right-click the name BootDir, and then, click Modify.
In the Edit String Value dialog box, type the drive letter for your system drive, and then click OK.   For example, if your system drive is C: then, type "C:\" (without quotes).
Close Registry Editor and restart the computer.
Install Windows XP Service Pack 3 that you downloaded.
note:           x86 folder is for 32-bit Windows
x86_64           folder is for 64-bit Windows
6.   Install bootcamp 2.1 drivers
note: you can also find the drivers on any original leopard OSX installation disk.. just insert into you CD/DVD drive under windows and the installation will start automatically
7.   Update bootcamp twice ( reboot after each update )
8.   Install the Apple HFS+ drivers for XP to gain 'read-only' access to your OSX HFS partition
          a. Copy AppleHFS.sys & AppleMNT.sys to C:\Windows\System32\drivers\
          b. Merge Add_AppleHFS.reg
          c. Restart
At this point you are done.. final things you can do is to set bootcamp to always boot into Windows first ( no need to hold down the option key ) and install any newer drivers.. i.e. graphics drivers.. other than that.. you can go ahead and enjoy XP!
Message was edited by: Jamie Telford

Having just put a 1TB hard drive in my MacBook Pro(late 2008) running Mountain Lion. I, being greedy, wanted partition the drive and have Mountain Lion and Snow Leopard (to run legacy apps) and Windows XP(currently running under Fusion) available on boot.
My main partition is ML. I repartitioned the 1TB drive and installed SL. SL Boot Camp won't let you install XP unless the SL partition is the one and only. So I followed your excellent instructions to set up XP having created a 100GB FAT partition. I didn't reformat the partition as per your step 4b (unlike the Boot Camp instructions page 8 step 2). However on rebooting into the XP drive it halts with a "hal.dll" error. ["i'm sorry I can't do that Dave" - 2001 A Space Odyssey]
Other options I've tried have been:
1 to format as NTFS at step 4b
2 to use a 32GB FAT partition as recommended in the Boot Camp guide.
Nothing has worked
Thought of trying to wipe all partitions and install SL as main OS. Then use Boot Camp to install XP. Finally to add partition for ML and install.
Maybe no!
cheers
Dave

My ipod 4th gen screen kept jumping this morning. Had to do a restore on it and it is working fine now. However, when I did the restore it did not load the Nike app that was factory installed on my ipod. I use this app daily. Any idea how to get it back

My ipod 4th gen screen kept jumping this morning. Had to do a restore to factory conditions and it is working fine now. However, it originally had a factory installed Nike+ app on it and it did not install with the restore. I use this app daily with the running chip to log my workouts. Anyone know how to get this app back from Apple? Loading the Nike app from the app store is not the same thing as you need gps running continually for it to work (as with an iphone). Can't have that with my ipod unless I'm connected to wifi. Help?? Thanks.

If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod

Installing 9.2.0.5 patch using new 10.1.0.2 installer

Similar Messages

Maybe you are looking for