Installing 9i database
Hi guru,
I have downloaded the oracle 9i installation. However when I click on the setup icon, I received the following error message:
Java RunTime Environment was not found at c:\....\jrew.exe. Hence, the oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or higher.
I copied jrew.exe to the stated path. But my Universal Installer still cannot be launched. Please advice. Your advice is greatly appreciated. Thanks.
Kelly
Java RunTime Environment was not found at c:\....\jrew.exe. Hence, the oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or higher.
assuming the path is some temporary path i had the same prob.
copying the jre there wont help because the installer copies its ofn jre into a different temporary dir every time u launch it.
in the installer dir there is some .ini file that specifies where to find the jre (within the installer). check if all files exist and if all paths are correct. i installed on linux but some things were wron so i assume it might be the same prob with your installation.
hth
I copied jrew.exe to the stated path. But my Universal Installer still cannot be launched. Please advice. Your advice is greatly appreciated. Thanks.
Kelly
Similar Messages
-
Cannot execute Install for database ORACLE_HOME
Dear ALl,
EBS 11.5.9 with Windows 2003, during multi-node installation error.
log file
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.9.21
>> Install session started : Fri Jul 25 17:41:05 GST 2008
>> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : sysd.apps.com
Host Operating System : Windows 2000
User running Install : applmgr
=================================================================
InstUpgPanel - User chooses to Install Oracle Applications
NumNodesPanel - Multi-node Selected
SIDSeedPanel - The PROD database is set to PROD fresh install database
ProductPanel - The following are the selected Product Groups for instance PROD
Basic
E-Business Intelligence
Marketing
TeleSales
Field Sales
Order Management
Inventory Management
Purchasing
Discrete Manufacturing
Process Manufacturing
TeleService
Service Contracts
Project Costing
Project Billing
Financials
Human Resources
ProductPanel - The following are the selected Product for instance PROD
0
160
190
265
601
174
175
690
874
709
454
452
450
558
451
530
517
520
549
670
691
882
521
676
880
696
697
660
522
544
869
676
279
697
660
702
401
665
673
401
665
201
202
250
401
702
703
704
705
706
712
550
551
552
553
554
555
556
557
514
511
542
862
696
872
170
866
518
515
510
870
524
542
275
275
101
140
200
222
240
260
600
8400
8401
8450
8901
231
673
800
804
8301
8302
TerritoryPanel - The following are the selected settings for instance PROD
LanguagePanel - The following are the selections from the Language Panel:
US - American_English
US - American_English
US7ASCII
US7ASCII
AMERICA
MultiNodePanel - Selected nodes:
[Ljava.lang.String;@eddac
[Ljava.lang.String;@7b7565
[[Z@583cf4
QuickPanel - Empty Fields were encountered. Number of empty Fields:1
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory created:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.apps.com
Ping request could not find host sysm.apps.com. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
appsa.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME available:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory available:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.appsa.com
Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
Ping statistics for 208.87.33.150:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 295ms, Maximum = 295ms, Average = 295ms
host.domain ping has suceeded
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Install Oracle 9i technology stack for PROD.
Install Oracle Applications Database Seed for PROD.
DoInstallPanel - User continued install at warning dialog.
DoInstallPanel - Beginning install for all users.
Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
APPL_TOP location: e:\oracle\prodappl
Database ORACLE_HOME: e:\oracle\proddb\9.2.0
Database SID: PROD
Database Context Name : PROD_sysd
Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Total number of processes in Current Install 3
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
"Database ORACLE_HOME installation succeeded"
e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please guide.Hi,
Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
------------------------------------------ -
Error while installing Oracle Database Lite 10.2.0.1.1 for Win
Hello,
I am trying to install Oracle Database Lite 10.2.0.1.1 on Windows XP. I am going according screens on this page:
http://www.oraclebrains.com/2008/07/installing-oracle-database-lite-10g-release-3-mobile-server/
But at Step:12 - Mobile Server repository Wizzard after password enter I get error --- Io exception: The Network Adapter could not establish the connection. May I insert specific password for Username SYSTEM? Or where is problem?
Thanks for hint
DavidHi,
I have the same problem but, how can i know what my SID is ? i am trying with "ORCL" and it doesnt work.
Do you know in which file i can get it ? in the documentation of the installation i found this:
"If you are not sure of the values to enter for the URL, then you can query the data dictionary to obtain these values.
Connect as SYSTEM and run the following queries.
To retrieve the SID, execute: select instance_name from v$instance;
If you need to retrieve the port number, check the listener.ora file on the
back-end database."
But how can i query the database if i have not finished to install it yet and where is located the listener.ora file ?
I hope you can help me.
Thank you. -
Can not Install Oracle Database 11g Release 2
This will be my second time trying to install Oracle Database 11g Release 2 on my Computer. I have Windows 7 x64 and when go through the setup phase, I receive numerous errors stating that files are missing and it will never get past that stage. I downloaded both folders for the database:
Oracle Database 11g Release 2 (11.2.0.1.0) for Microsoft Windows (x64)
win64_11gR2_database_1of2.zip (1,213,501,989 bytes) (cksum - 3906682109)
win64_11gR2_database_2of2.zip (1,007,988,954 bytes) (cksum - 1232608515)
Can anyone tell me what I am doing wrong?Pl post the complete error message. Have you unzipped the two files into the same directory ?
Oracle 11g R2 Windows Installation issue
Re: 11g R2 install failure
Srini -
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit
Can we install Oracle Database 10g 32 bit on Windows 2008 64bit will there be any disadvantages, will all the features of Oracle database work ( Like Data Guard , OEM, Grid Control).
Solution will be appriciated.Hi,
If it is true can you please give me some reference doc, as per my knowledge installing Oracle Database 10g 32 bit on Windows 2008 64bit must be possible.
Thanks & Redards -
How to install Oracle Database 10.2.0.3
Hi,
I need to install Database 10.2.0.3 in a Windows Server 2003 R2, but I don`t kown what is the best opcion:
a) Install directy Database 10.2.0.3 that I have downloaded from Oracle web http://www.oracle.com/technology/software/products/database/index.html
At this web, it recomends install 10.2.0.3 in Windows Vista ONLY!!!!!!
b) First, install base version 10.2.0.1 and yhen apply patch number 5337014.
How must I Install RDBMS 10.2.0.3 in Windows Server 2003 R2????
ThanksYou have wasted your bandwidth by downloading a 'Windows Vista ONLY' version, It is clear why.
You must install the 10.2.0.1.0 for windows on your Windows 2003 and once it is installed, just perform a second install from the stage area where the 10.2.0.3.0 patchset was uncompressed. Detailed instructions can be found within the companion readme file. You must make sure all related services have been shutdown prior to apply the patch. Once the patch has been applied database upgrade step takes place, only if you currently have databases running on 10.2.0.1.0.
~ Madrid -
How to install oracle database 11g express edition on Windows 7
Hi Guys,
i am trying to download and install Oracle database 11g express edition on windows7 and i can't seem to get it right. i did get the download but when i try to install, it keeps saying it appears to be an invalid archive.
Please help..Action - Refer to the logs or contact OracleFinding the problem is the key. "Refer to the logs" is the only option, XE has no oracle support offerings.
Which plugin failed, and why did it fail will be important clues. There should be error messages in the log that will be helpful.
Otherwise, we don't have much help to offer. Fixing a problem means identifying the problem and performing steps to correct it, if there a fix is available.
A MOS lookup on the ins-20802 error has snippets from one installer session, this one is from an x64 install. Not x86. To paraphrase the details:
... Created a new file <drive>:<OH path>\cfgtoollogs\configToolAllCommands
SEVERE: java.io.IOException: Access is denied
...So from those symptoms, the user trying to run the installer does not have appropriate rights on that drive and/or folder. The fix for that particular problem is adding the user to the local administrators group. And rerunning the install. After running the deinstall steps to clean up the installation. As specified in the XE install guide for Windows.
http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm
Also note the System Requirements, it specifies a System architecture Intel x86, which is not X64. There is no X64 installer for XE on Windows. So it might work. Or it might not if your host is x64.
So if that is your particular error, verify that your user is in the local admins group. Either use the local users and groups applet (Start/Run/lusrmgr.msc) and open up the Administrators group. Click the Add button. Find your user. If your OS user is a windows domain user, be sure you have authenticated to the domain.
Try the `net ...` list of the adminis group, that should reveal whom is indeed in the local administrators group:
net localgroup administrators
Administrator
<domain>\Domain Admins ... # ??? is the host in windows domain ???
<domain>\Local Admins
<domain>\<user1>
<user2>
<user3>
echo %USERNAME%
# if relevant:
echo %USERDOMAIN%Like it also states in the Windows install guide, under Permission Required quote:
... must be a member of the Administrators group on Windows to install Oracle Database XE. -
SAPINST failed step "Install Oracle Database (post processing)"
i will install ep6.0 with oracle database 9.2.0.4 on sun solaris.
the SAPINST failed at the step "Install Oracle Database (post processing) with follow error.
the oui - installer (runinstaller) finished sucessfully.
ERROR 2004-08-31 16:05:17
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: ORA-01501: CREATE DATABASE failedORA-01101: database being created currently mounted by some other instance
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning optionJServer Release 9.2.0.4.0 - Production. SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
no user is logged on the Database. Database is not running (is shutdowned and unmounted). No Oracle process is running.
pleas help.
thanks
armin hadersbeckHi Armin,
We're going to install EP 6 stack3 with Oracle 9.2.0.4 and Solaris 9. We have exactly the same error as you during sapinst.
How do you solved that ?
Thanks a lot for your help,
Regards from Mexico,
Diego -
Error in installing sap database
hello sir
i have a problem in installing sap database instance .
error message :-
an error occured during the installation of component SAP R3E 4.7*200 SR!>ABAP System>non-unicode> Install a database instance
error:
ERROR 2010-07-08 18:19:31
MSC-01015 Process finished with error(s), check log file E:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPREPOS.log
ERROR 2010-07-08 18:20:01
MSC-01015 Process finished with error(s), check log file E:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPAPPL2.log
ERROR 2010-07-08 18:20:01
MSC-01015 Process finished with error(s), check log file E:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPINDTE.log
Edited by: jasleen kaur on Jul 9, 2010 12:19 PM> an error occured during the installation of component SAP R3E 4.7*200 SR!>ABAP System>non-unicode> Install a database instance
> error:
> ERROR 2010-07-08 18:19:31
> MSC-01015 Process finished with error(s), check log file E:\Program Files\sapinst_instdir\R3E_472SR1_ABAP_NUC\DB/SAPREPOS.log
I always wonder why people post such kind of messages without having a look into those files before posting...
Markus -
Installing Oracle Database Express Edition 11g on UBUNTU
Hello everyone,
I want to install Oracle Database Express Edition 11g on UBUNTU. I followed the steps from this link created by Dude:
https://forums.oracle.com/thread/2303639?start=0&tstart=0
My problem becomes when I type in from the terminal:
sudo /etc/init.d/oracle-xe configure
I followed the instructions there, agreeing t HTTP port 8080, port database listener 1521, specifying a password for my database account, and wanting Oracle Express to be started on boot. This is what I'm getting:
Starting Oracle Net Listener...touch: cannot touch `/var/lock/subsys/listener': No such file or directory
Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
I have no idea what this means, so I went into the log's location and I found 4 of them, so I clicked on each of them, and this is what I'm getting:
1. cloneDBCreation.log:
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
Create controlfile reuse set database "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system enable restricted session
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database "XE" open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database rename global_name to "XE"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system switch logfile
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter system checkpoint
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
2. CloneRmanRestore.log
ORA-00845: MEMORY_TARGET not supported on this system
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
declare
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
3. postDBCreation.log
begin
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
File created.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00845: MEMORY_TARGET not supported on this system
select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN utl_recomp.recomp_serial(); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
4. postScripts.log
CREATE OR REPLACE LIBRARY dbms_sumadv_lib AS '/u01/app/oracle/product/11.2.0/xe/lib/libqsmashr.so';
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_datapump_utl.replace_default_dir; END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
create or replace directory XMLDIR as '/u01/app/oracle/product/11.2.0/xe/rdbms/xml'
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ORACLE_OCM_CONFIG_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY ADMIN_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
DROP DIRECTORY WORK_DIR
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
BEGIN dbms_swrf_internal.cleanup_database(cleanup_local => FALSE); END;
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
commit
Can somebody that knows this, or has installed Oracle Express on Ubuntu, to please explain it to me what does it mean and why am I getting those errors. Please explain thoroughly as if I am an amateur person, IN DETAIL, STEP-BY-STEP. I want to run it and make it work! I heard that it encourages people to answer for points. I am open for your suggestions and experiences, as long as it's not 'use common sense', 'you're dumb', or an answer that is vaguely explained. Thank you for those that take the time to read it.
ec557fac-f825-4356-a220-1ec941ce7cd0Hi Pradeepcmst,
Thanks for your suggestion, but I found it sometimes misunderstanding on what he's trying to say - his instructions are not step-by-step and precise. Instead, I found this link that helped me a lot:
Installing Oracle 11gXE on Mint and Ubuntu | The Anti-Kyte -
Can't succesfully install Oracle Database 10g Express Edition on Ubuntu
Hi,
I've been trying to install Oracle Database 10g xe on Ubuntu 10.04 and when I execute the .deb package (oracle-xe-universal_10.2.0.1-1.0_i386.deb) I get a quick installation that doesn't ask me for any configuration settings. When the installation is finished I don't get any menu in my Applications menu named "Oracle Database 10g Express Edition" as specified in Getting Started Guide (I only get some items grouped into an category called "Other" (Backup Database, Get Started, Get Started With Oracle Database 10g Express Edition, Go To Online Forum, Read Documentation, Read Online Help, Register For Online Forum, Restore Database, Run SQL Command Line, Start Database and Stop Database). As a consequence I can't access the Oracle Database Home Page.
In addition when I click on Start Database I get the following message: "Operation failed. josep is not member of 'dba' group".
I've tried to re-download the packages and to configure it by editing /etc/init.d/oracle-xe but this doesn't solve my problem.
can you give me some help?
Thabk you in advance!Markus Waldorf wrote:
Did you run the post-installation?
$ sudo /etc/init.d/oracle-xe configureYes I've done it but it doesn't seem to work... -
The problem of installing oracle database 9.2.0 on Redhat 7.2
Hi, there,
I meet an error when I want to run runInstaller to install oracle database 9.2.0 on Redhat 7.2 at the Oracle Database Configuration Assistant step:
ORA-03113:end-of-file on communication channel.
the installer report every other things are installed successfully except Database Configuration Assistant. but after I try to connect to database using sqlplus:
sqlplus /nolog
connect / as sysdba
after a very long responding time, there is an interior error. I don't know how to fix it. do I need reinstall the oracle or mannully configure the database? how to do that? my machine is P2 266 with 128M memory. the harddisk is 30GB. I don't know if this problem is caused by memory limitation?
besides, who knows any other forums or website about oracle database installed on linux? I found there is very limit resource about this content on oarcle website.
any hint will be great appreciated!It could be because of the memory. Oracle 9.x requires 512 MB minimum on Linux. Also the only Red Hat Oracle is now supporting is Advanced Server. But there are workarounds.
There is an excellent web site for installing Oracle on Linux, but it has been down for the last week or two. But try it maybe next week:
www.puschitz.com -
Re: Not able to install oracle database 11.2.0.2.0 in Windows 7
Hello,
I too am facing a similar issue while installing Oracle 12c Datbaase on a Virtual box machine with Windows 2008 R2 OS Image.
Cause - Failed to access the temporary location.
Action - Ensure that the current user has required permissions to access the temporary location.
Additional Information:
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
My HOst machine is windows 7 and I have allocated 4GB of physical memory and 4 Processors to the Virtual Machine.
I believe this is a decent config for Oracle 12c Database. M also logging on to this system with a Admin Rights User and invoking the Installation using this User.
Earlier I had Oracle 11g Database installed on this along with Enterprise Manager 12c Cloud Control.
Recently I wanted to upgrade to Oracle 12c Database for which my multiple upgrade attempts failed with the above error. So I thought the system might be requiring some minimum. spare on the C Drive.
I decided to go ahead with Oracle 11g De-install and further attempted to install 12c Database. However the problem still persists .
Any help and clues on how to Resolve this issue is highly appreciated.
Regards,
Nayan Tejani
+91 98333 02666Sorry missed to put across the error log. here it is from the recently failed installation
~~~
Using paramFile: E:\Oracle12cDatabase\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
The commandline for unzip:
E:\Oracle12cDatabase\database\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.6.0.37.0\1\DataFiles/"*.jar" -d "E:\TEMP\OraInstall2013-09-04_07-16-57AM" INFO: Loading data from: jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/E:/TEMP/OraInstall2013-09-04_07-16-57AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:config-data]
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:id in the bean:configcmd
INFO: Setting value for the property:platformcmdmap in the bean:configcmd
INFO: Setting value for the property:configcmds in the bean:configcmdmappings
INFO: Inventory exists: true
INFO: oraInst.loc does not exist
INFO: Gathering system details...
INFO: Registering setup bean
INFO: Building Flow
INFO: No global condition definition found.
INFO: Building the flow graph
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state finishupdates
INFO: Building the flow graph
INFO: Loaded state prepInstall
INFO: Loaded state decideOCMInstall
INFO: Loaded state autoupdatesDecider
INFO: Loaded state preAutoUpdates
INFO: Loaded state AutoUpdatesOptionsUI
INFO: Loaded state UpdatesListUI
INFO: Loaded state supportedOSCheck
INFO: Loaded state getOCMDetails
INFO: Loaded state mtsDialog
INFO: Loaded state installOptions
INFO: Loaded state getWindowsSecureOptionDetails
INFO: Loaded state getSystemClass
INFO: Loaded state DBTypeSelectionPage
INFO: Loaded state RACDBTypeSelectionPage
INFO: Loaded state nodeSelectionPage
INFO: Loaded state upgradeValidation
INFO: Loaded state installType
INFO: Loaded state quickInstallPage
INFO: Loaded state productLanguage
INFO: Loaded state inventoryPage
INFO: Loaded state getOracleHome
INFO: Loaded state dbEdition
INFO: Loaded state configurationType
INFO: Loaded state dbIdentifier
INFO: Loaded state configurationOption
INFO: Loaded state managementOption
INFO: Loaded state storageOption
INFO: Loaded state recoveryOption
INFO: Loaded state selectASMDiskGroups
INFO: Loaded state schemaPasswordDialog
INFO: Loaded state getPrivilegedOSGroups
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state performChecks
INFO: Loaded state showSummary
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=supportedOSCheck
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[DBTypeSelectionPage]: route=rac_dbcreate; to=RACDBTypeSelectionPage
INFO: State[DBTypeSelectionPage]: route=rac_no_dbcreate; to=nodeSelectionPage
INFO: State[DBTypeSelectionPage]: route=si_dbcreate; to=installType
INFO: State[DBTypeSelectionPage]: route=si_no_dbcreate; to=productLanguage
INFO: State[RACDBTypeSelectionPage]: route=admin; to=nodeSelectionPage
INFO: State[RACDBTypeSelectionPage]: route=policy; to=installType
INFO: State[UpdatesListUI]: route=success; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_DISABLE; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=AUTO_UPDATES_STATE_SKIP; to=supportedOSCheck
INFO: State[autoupdatesDecider]: route=success; to=preAutoUpdates
INFO: State[configurationOption]: route=success; to=storageOption
INFO: State[configurationType]: route=success; to=dbIdentifier
INFO: State[dbEdition]: route=oraclehome_location; to=getWindowsSecureOptionDetails
INFO: State[dbIdentifier]: route=success; to=configurationOption
INFO: State[decideOCMInstall]: route=ignoreOCM; to=autoupdatesDecider
INFO: State[decideOCMInstall]: route=requireOCM; to=getOCMDetails
INFO: State[getOCMDetails]: route=success; to=mtsDialog
INFO: State[getOracleHome]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[getOracleHome]: route=advanced_yes_inventory_no; to=inventoryPage
INFO: State[getOracleHome]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=advanced_yes_upgrade_yes; to=prereqExecutionDecider
INFO: State[getPrivilegedOSGroups]: route=success; to=prereqExecutionDecider
INFO: State[getSystemClass]: route=desktop_class_yes; to=getWindowsSecureOptionDetails
INFO: State[getSystemClass]: route=server_class_yes; to=DBTypeSelectionPage
INFO: State[getWindowsSecureOptionDetails]: route=basic_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=desktop_class_yes; to=quickInstallPage
INFO: State[getWindowsSecureOptionDetails]: route=success; to=getOracleHome
INFO: State[installOptions]: route=advanced_yes_softwareDB_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=migrate_yes_clusterware_no; to=upgradeValidation
INFO: State[installOptions]: route=migrate_yes_clusterware_yes; to=DBTypeSelectionPage
INFO: State[installOptions]: route=system_class; to=getSystemClass
INFO: State[installType]: route=advanced_yes; to=productLanguage
INFO: State[installType]: route=basic_yes; to=getWindowsSecureOptionDetails
INFO: State[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: State[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: State[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=advanced_yes_createDB_yes; to=configurationType
INFO: Condition of state[inventoryPage]: route=advanced_yes_softwareDB_yes; to=prereqExecutionDecider
INFO: Condition of state[inventoryPage]: route=basic_yes; to=prereqExecutionDecider
INFO: State[managementOption]: route=success; to=recoveryOption
INFO: State[mtsDialog]: route=success; to=autoupdatesDecider
INFO: State[nodeSelectionPage]: route=create_and_configureDB; to=installType
INFO: State[nodeSelectionPage]: route=software_onlyDB; to=productLanguage
INFO: State[nodeSelectionPage]: route=upgradeDB; to=upgradeValidation
INFO: State[performChecks]: route=success; to=showSummary
INFO: State[preAutoUpdates]: route=success; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=DOWNLOAD_UPDATES_ONLY; to=AutoUpdatesOptionsUI
INFO: State[prepInstall]: route=success; to=decideOCMInstall
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=performChecks
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=showSummary
INFO: State[productLanguage]: route=productlanguage_yes; to=dbEdition
INFO: State[quickInstallPage]: route=basic_yes_inventory_no; to=inventoryPage
INFO: State[quickInstallPage]: route=basic_yes_inventory_yes; to=prereqExecutionDecider
INFO: State[recoveryOption]: route=asm_chosen_asm_not_present; to=schemaPasswordDialog
INFO: State[recoveryOption]: route=asm_chosen_asm_present; to=selectASMDiskGroups
INFO: State[recoveryOption]: route=asm_not_chosen; to=schemaPasswordDialog
INFO: State[schemaPasswordDialog]: route=success; to=prereqExecutionDecider
INFO: State[selectASMDiskGroups]: route=success; to=schemaPasswordDialog
INFO: State[setup]: route=success; to=finish
INFO: State[showSummary]: route=success; to=setup
INFO: State[storageOption]: route=success; to=managementOption
INFO: State[supportedOSCheck]: route=success; to=installOptions
INFO: State[upgradeValidation]: route=success; to=productLanguage
INFO: State[AutoUpdatesOptionsUI]: route=NO_AUTO_UPDATES; to=finishupdates
INFO: State[AutoUpdatesOptionsUI]: route=success; to=UpdatesListUI
INFO: State[UpdatesListUI]: route=DOWNLOAD_UPDATES_FINISHED; to=finishupdates
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Loading beanstore from a given input stream
WARNING: Unable to create xml tag for the key:CommonProgramFiles(x86)
WARNING: Unable to create xml tag for the key:ProgramFiles(x86)
INFO: Translating external format into raw format
INFO: Loading flow data beans
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Setting value for the property:RootConfigurationSettings in the bean:DBSetupBean
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_db_StorageType in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseFileSystemForRecovery in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_UseSamePassword in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_ConfigTabSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_CharSetOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_InstallOptionSelected in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_managementOption in the bean:DBInstallSettings
INFO: Setting value for the property:oracle_install_db_SuperAdminPasswords in the bean:DBInstallSettings
INFO: Setting value for the property:DBInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:CentralInventorySettings in the bean:DBSetupBean
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:AutoUpdatesInstallSettings in the bean:DBSetupBean
INFO: Setting value for the property:OCMSettings in the bean:DBSetupBean
INFO: Setting value for the property:WindowsSecureOptionSettings in the bean:DBSetupBean
INFO: Set value for bean DBSetupBean
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Loading beans from Properties Bean Store. [BeanStoreName:beanstore]
INFO: Setting value for the property:oracle_install_autoupdates_myOracleSupportCredentials in the bean:AutoUpdatesInstallSettings
INFO: Setting value for the property:oracle_install_autoupdates_httpProxySettings in the bean:AutoUpdatesInstallSettings
INFO: Loading beans from Xml Bean Store. [BeanStoreName:beanstore]
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.WindowsSecureOptionUI viewId: WindowsSecureOptionUI uiType: null]
INFO: oracle.install.ivw.db.view.WindowsSecureOptionUI added to View Type Registry with the key as [WindowsSecureOptionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBTypeSelectionGUI viewId: DBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.DBTypeSelectionGUI added to View Type Registry with the key as [DBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RACDBTypeSelectionGUI viewId: RACDBTypeSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.RACDBTypeSelectionGUI added to View Type Registry with the key as [RACDBTypeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Adding View[type: oracle.install.ivw.common.view.AutoUpdatesOptionsUI viewId: AutoUpdatesOptionsUI uiType: null]
INFO: oracle.install.ivw.common.view.AutoUpdatesOptionsUI added to View Type Registry with the key as [AutoUpdatesOptionsUI]
INFO: Adding View[type: oracle.install.ivw.common.view.UpdatesListUI viewId: UpdatesListUI uiType: null]
INFO: oracle.install.ivw.common.view.UpdatesListUI added to View Type Registry with the key as [UpdatesListUI]
INFO: Adding View[type: oracle.install.ivw.common.view.FinishUpdatesUI viewId: FinishUpdatesUI uiType: null]
INFO: oracle.install.ivw.common.view.FinishUpdatesUI added to View Type Registry with the key as [FinishUpdatesUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
AutoUpdatesInstallSettings oracle.install.ivw.common.bean.AutoUpdates
InstallSettings@78216b59
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
CentralInventorySettings oracle.install.ivw.common.bean.CentralInve
ntorySettings@3241b635
DBInstallSettings oracle.install.ivw.db.bean.DBInstallSettin
gs@1f635484
DECLINE_SECURITY_UPDATES false
FROM_LOCATION E:\Oracle12cDatabase\database\install\../s
tage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD *Protected value, not to be logged*
MYORACLESUPPORT_USERNAME
OCMSettings oracle.install.ivw.common.bean.OCMSettings
@3fd83cf4
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME NTEJANI-VBOX2
PROXY_HOST
PROXY_PORT
PROXY_PWD *Protected value, not to be logged*
PROXY_USER
RootConfigurationSettings oracle.install.ivw.common.bean.RootConfigu
rationSettings@54be8c3e
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
UNIX_GROUP_NAME
WindowsSecureOptionSettings oracle.install.ivw.common.bean.WindowsSecu
reOptionSettings@d89d7eb
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_IsBuiltInAccount false
oracle_install_IsOracleServiceUserExists false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_ProductName
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_autoupdates_httpProxyPort 0
oracle_install_autoupdates_httpProxySettings oracle.install.ivw.common.bean.HttpProxySe
ttings@5fb7565
oracle_install_autoupdates_myOracleSupportCredentials oracle.install.ivw.common.bean.MyOracleSup
portSettings@5a0eddac
oracle_install_db_ASMSNMPUserPassword *Protected value, not to be logged*
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_ConfigureAsContainerDB false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_SID
oracle_install_db_ServerPoolCardinality 0
oracle_install_db_SetOracleBase false
oracle_install_db_SkipHARegistration false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords *Protected value, not to be logged*
oracle_install_db_SuperAdminSamePasswdForAll *Protected value, not to be logged*
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
oracle_install_db_isRACOneInstall false
oracle_install_db_managementOption DEFAULT
oracle_install_db_omsPort 0
oracle_install_db_racOneServiceName
oracle_install_rootConfiguration_ExecuteRootScript false
INFO: Launching Oracle Database 12c Release 1 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@e235e9d
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state mtsDialog
INFO: Completed executing action at state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <mtsDialog>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <mtsDialog>
INFO: Completed validating view at state <mtsDialog>
INFO: Validating state <mtsDialog>
INFO: Completed validating state <mtsDialog>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state autoupdatesDecider
INFO: Completed executing action at state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <autoupdatesDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <autoupdatesDecider>
INFO: Completed validating view at state <autoupdatesDecider>
INFO: Validating state <autoupdatesDecider>
WARNING: Validation disabled for the state autoupdatesDecider
INFO: Completed validating state <autoupdatesDecider>
INFO: Reading shiphome metadata from E:\Oracle12cDatabase\database\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.OUIMetadata from file:/E:/Oracle12cDatabase/database/install/../stage/shiphomeproperties.xml
INFO: Loading beans from Xml Bean Store. [BeanStoreName:oui-metadata]
INFO: Setting value for the property:properties in the bean:oui-metadata
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state preAutoUpdates
INFO: Completed executing action at state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <preAutoUpdates>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <preAutoUpdates>
INFO: Completed validating view at state <preAutoUpdates>
INFO: Validating state <preAutoUpdates>
WARNING: Validation disabled for the state preAutoUpdates
INFO: Completed validating state <preAutoUpdates>
INFO: Verifying route success
INFO: Get view named [AutoUpdatesOptionsUI]
INFO: View for [AutoUpdatesOptionsUI] is oracle.install.ivw.common.view.AutoUpdatesOptionsUI[,0,0,0x0,invalid,layout=java.awt.FlowLayout,alignmentX=0.0,alignmentY=0.0,border=,flags=9,maximumSize=,minimumSize=,preferredSize=]
INFO: Initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed initializing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed displaying view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed loading view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Completed localizing view <AutoUpdatesOptionsUI> at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state AutoUpdatesOptionsUI
INFO: Completed executing action at state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <AutoUpdatesOptionsUI>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <AutoUpdatesOptionsUI>
INFO: Completed validating view at state <AutoUpdatesOptionsUI>
INFO: Validating state <AutoUpdatesOptionsUI>
INFO: Completed validating state <AutoUpdatesOptionsUI>
INFO: No updates will be downloaded or applied
INFO: Verifying route NO_AUTO_UPDATES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state supportedOSCheck
INFO: Completed executing action at state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <supportedOSCheck>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <supportedOSCheck>
INFO: Completed validating view at state <supportedOSCheck>
INFO: Validating state <supportedOSCheck>
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Verifying setup for installer validations
INFO: Overall status of CVU API call:OPERATION_FAILED
SEVERE: [FATAL] [INS-30131] Initial setup required for the execution of installer validations failed.
CAUSE: Failed to access the temporary location.
ACTION: Ensure that the current user has required permissions to access the temporary location.
*ADDITIONAL INFORMATION:*
- Framework setup check failed on all the nodes
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
Summary of the failed nodes
ntejani-vbox2
- Version of exectask could not be retrieved from node "ntejani-vbox2"
- Cause: Cause Of Problem Not Available
- Action: User Action Not Available
~~~ -
Installing Oracle Database 11gR2 on Linux with Unbreakable Ente. Kernel
Hello,
I have Oracle Linux 5.5 with Oracle's Unbreakable Enterprise Kernel.
what do I need to have/prepare to install Oracle database 11gR2 on it?
the hardware part and the partitions are done!
1-
Do I need to install/run Oracle Validated Configuration RPM? even if I have Oracle's Unbreakable Enterprise Kernel?
if yes does in means the Oracle's Unbreakable Enterprise Kernel does not prepare/configure the system to host database?
2-
With any of the above
do I still need create or edit the /etc/sysctl.conf file, and add or edit lines similar to the following:
fs.aio-max-nr = 1048576
fs.file-max = 6815744
kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 9000 65500
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
I saw allot of docs out there, but none answered these questions!
so please do not post docs or links to a general sites!
Thank you for the helpDude wrote:
The intention of Oracle UEK is quite obviously Oracle specific, so I think it is legitimate to ask why not to include the Oracle specific kernel configuration file. The UEK is a drop-in replacement for the existing kernel. Why would we include the oracle-validated configuration options into the kernel package when we already have a perfectly good oracle-validated RPM that can be used with both kernels? Also, the UEK may be Oracle specific, but it's not database specific. Keep in mind that Oracle has thousands and thousands of products. :) I run the UEK on lots and lots of servers, many of which don't run database and many of which have completely different /etc/sysctl.conf configurations.
The list of available packages and add-on's at http://public-yum.oracle.com/repo/OracleLinux/OL5/5/base/x86_64/ is growing. So perhaps it's just a matter of continued development.
Not sure what the point of this statement is: there are no plans to incorporate the oracle-validated configuration into the kernel, as it already exists in oracle-validated. -
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
DYou can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist. -
I have Installed Oracle Database 10g Express Edition so i have Problem.....
Hello Friends
I have Installed Oracle Database 10g Express Edition in "Ubuntu Linux" but i have Following Problems:
1.) After i installed Oracle Database 10g Express Edition i gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Run SQL Command Line"
SQL Window has been opened there i have typed "SELECT * FROM tab;" here i got Warning Messg of
"SP2-0640: Not connected"
2.) From There i have Again gone to
"Application" -> "Oracle Database 10g Express Edition" -> "Start Database"
i got Warning Messg of "Operation Failed. venu is not a Member of DBA Group"
3.) Finally i want Solution For "How to get Connected in "Oracle Database 10g Express Edition"
Please Post the Answer As Soon As Possible ...
From Venu(INDIA)Was the oracle-xe configure completed successfully?
Are the pmon and listener processes running ... set your environment and connect via sqlplus if so. If no processes, the instance needs a startup.
$ ps -ef |egrep pmon
oracle ... ora_pmon_XE
$ ps -ef |egrep lsnr # can also check the listener status, see below
oracle ... /usr/.../tnslsnr ...
$ lsnrctl status
Endpoints Summary ...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=<your hostname>)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=http) ... (PORT=8080)))
...In the ORACLE_HOME/bin directory there is a shell script you can source to set up your environment variables for connecting to the database. The full path to the .sh should be revealed by the tnslsnr process, /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
$ /usr/.../oracle_env.sh
$ sqlplus /nolog
SQL> connect system
Password: ...
Connected.
SQL> select status from v$instance;
STATUS
OPENThe oracle user created by the configure won't have a known password set. Set it and switch user to the oracle login. If you don't want to muck about with the oracle user, at least add your user to the dba group so that you can connect with the sysdba privilege when needed.
Edited by: clcarter on Feb 22, 2011 7:06 AM
Maybe you are looking for
-
WEBGUI is not working in portal
Hi I had conected to production server and created Transactional Iview with SAPGUI for WINDOWS and running it successfully. My aim is to make use of SAPGUI for HTML in the place of SAPGUI for WINDOWS. So i had activated ITS services successfully and
-
Itunes won't open-error-says Itunes has stopped working
I can't open Itunes--it keeps saying it has stopped working and it tries to find a solution. Then it shuts down and nothing happens. I have uninstalled and redownloaded it but same problem.
-
Macbook Problems: Hard Drive Failure or Bad Ram?
I bought a used Black Macbook several months ago. Everything was fine until recently I ran into some problems. It wouldn't boot one day at all, so I wiped the drive clean and reinstalled Snow Leopard. Once again everything was fine for a while until
-
I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs. The first step in the wrapper is to create a Transcript file using following code if ($Host.na
-
Hi I got the following the error message: <!-- Call Adapter --> - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand=""> <SAP:Category>XIAdapter</SAP:Category> <SAP