Installing 9i on win2003 server and patch 9.2.0.6

Hi,
here's my problem:
I want to install the Oracle 9i DB Standard Edition on a win2003 server.
In the download page, I have the following options:
1) Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
http://www.oracle.com/technology/software/products/oracle9i/htdocs/win2k3soft.html
2) Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP
http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html
In the option 1) it states "...dard/Personal/CLIENT Edition ..." Even though the OS is the appropiate one, it seems that this download refers to the client tools.
In the option 2) it states "for Windows NT/2000/XP" and then I don't know if it is valid for a win 2003 OS.
And then I would like to update the 9.2.0.1 installation to a 9.2.0.6 using a Patch set referred as Patch 3948480 and called "Oracle9i Patch Set Notes
Release 2 (9.2.0.6.0) Patch Set 5 for Windows (32-Bit) ".
From this i understand that is the right patch for my OS but it doesn't work.
So, 2 question:
1) which download should I install? the one for the win NT/XP and so on OR the one referred to the win 2003 os
2) and secondly, why does not the patch set work properly on my win 2003 OS?
Thanks in advance.

Hi.
I don't think that is entirely correct. I believe that I have been involved in either installation of 9.2.0.1 on 2003 server with standard patching all the way up to 9.2.0.7 using the Win-32bit software available from technet and metlink.
From what I can see from the release notes from Technet on 9.2.0.3, this is simply a standard patchset that you could have found on metalink. Probably Oracle has only certified version 9.2.0.3 or higher for 2003 server. The following is written in the release note:
This patch set has the following system requirements: Item Requirement
Hardware Platform Intel Pentium
Operating System Windows 2000(Service Pack 2), Windows NT 4.0 , Windows 98(Client only), Windows XP Pro
RDBMS Baseline Release 9.2.0.1.0
This very same patchset is available from Metalink if you search for 9.2.0.3 for windows 32-bit.
So if I were you I know what I would have done. This is stated earlier:
Install latest full version from technet (9.2.0.1).
Apply patchset 9.2.0.7 from MetaLink.
Or you could as you suggested, install 9.2.0.1. Apply patchset 9.2.0.3 and furher apply patchset 9.2.0.7.
Good luck
Rgds
Kjell

Similar Messages

Launch Console fails: the vnc viewer is not installed on the manager server and no local vnc viewer is found.

Hello,
I have created and started a VM image and try to configure this image, but when launching the console I get the error:
"the vnc viewer is not installed on the manager server and no local vnc viewer is found."
I've read the vnc console does not rely on a local version of the vnc client, but uses the java vnc. From the java log I get:
Java Web Start 1.6.0_43
Using JRE version 1.6.0_43-b01 Java HotSpot(TM) Client VM
User home directory = C:\Users\kgraaf
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.RasProxyApplet main
INFO: ServiceType : VNC
28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
INFO: Os is : windows 7
It is not clear to me yet what is expected to be running where. My configuration is:
- VM Server 3.1 on Linux host A
- VM Manager 3.1 on Linux host B
- Connected via Windows 7 64-bit client via a browser to the Management Server. Let's call this host C
When launching the console it tries to connect to 127.0.0.1:60505 so to localhost and a port#.
- Given this information I would expect it tries to launch the vncviewer from my management server (host B).
- /usr/bin/vncviewer is installed on host B, but this appears not to be used.
- We see java vnc is started on my Windows 7 client (host C) and it tries to connect to 127.0.0.1 (localhost on my Windows client??) and not to the remote management server (host B)!?
Questions:
1 - Can someone explain what exactly is being executed (from where and to which host) when launching the console?
2 - Is this a java version / Windows 7 related configuration issue? How to fix this?
Thanks,
Klaas.

Per Oracle's website - RAN into this a few hours ago...Do it as ROOT on the VM Manager Host
http://docs.oracle.com/cd/E26996_01/E18548/html/BABFBEIF.html
It is preferred that you install either TightVNC on the Oracle VM Manager host computer. You can get the latest TightVNC package from:
http://oss.oracle.com/oraclevm/manager/RPMS/http://oss.oracle.com/oraclevm/manager/RPMS/
Install TightVNC with the command:
# rpm -ivh tightvnc-java-version.noarch.rpm

No Protection Tools! I have enabled enhanced security. This is Acrobat XI on Windows 7 64-bit. Did same install on a Win8 server and it's fine.

I just want the protection tools to show on the Tools dropdown! So I can use them...

Hi Sara,
Thanks for putting me in the right place. I'm not much of an
online-community person!
Here's what happened after your email:
1. I went into Acrobat and clicked the down arrow as you described. I
previously had been clicking in the View menu. I saw the Protection
tools and I was so excited.
2. So then I clicked on "allow multiple panels open" whereupon the
Protection tools disappeared! They did not reappear when I unclicked the
"allow multiple panels open".
3. Remembered that I hadn't reinstalled the updates after reinstalling
Acrobat in hopes that would fix this problem, so I installed the
updates. I'm now on 11.0.07.
Sadly, still no protection tools appearing in either the View-> Toolsets
or the down-arrow in the upper-right corners of the Tools panel. Bummer.
This is so strange, since the same installation worked great on our Win8
server!
PNG Karen
On 2014-06-11 15:14, Sara.Forsberg wrote:
NO PROTECTION TOOLS! I HAVE ENABLED ENHANCED SECURITY. THIS IS ACROBAT XI ON WINDOWS 7 64-BIT. DID SAME INSTALL ON A WIN8 SERVER AND IT'S FINE.
created by Sara.Forsberg in Acrobat Installation & Update Issues - View the full discussion

Install both Sun Application server and Jboss application server- Can I?

Dear all,
I am programmer and want to test for something.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?
Is there any special attention I need to take?

I am programmer and want to test for something.Allowed.
Is it possible to install sun application server and jboss application server in the same computer (Windows XP Professional)?Why do you think it may not be possible ?
Is there any special attention I need to take?just the way the URL is populated.

Oraperf.dll and openfcfg not installed to 10g Win2003 server

I'm unable to configure the db account used by the performance counters because the pieces described in the documentation are not on the database server: the MMC assistent is there but there's no Performance item; openfcfg.exe is not there and I don't see the keys in the registry that you'd expect. oraperf.dll is also not on the machine.
This makes me wonder if I'm supposed to install the client to the database server machine, as these pieces seem to come with the client. I started to do that but stopped when I wasn't sure how this would affect the software already updated using patch set 1 (to 10.1.0.3).
Thanks for your suggestions.
PS: the machine is also our web server which needs access to the database; that also suggests that the client should be installed. But I wait to hear what you think...

Hola, hablas español?
thank you for your reply...
whenever i try to connect to test2 by EM it sends me straight to http://my:5502/em/console/database/instance/repDown
i created yesterday test3 DB, and it is working!!!!
my 4 DBs work... but EM+test2 doesn't!
4 ODBCs working...
i can connect to all of my DBs by Toad... SQL*Plus too...
so?
what could it be?

Help for install NW04s SR2 + win2003 server 64bit

I use following S/W and H/W condition to install a NW04s SR2 (ABAP + Java) central system.
S/W: Win 2003 standard x64 edition, SP2. SQL 2005,
H/W: CPU:Intel Xeon*1, RAM: 4GB, virtual memory: 20GB.
JDK: 1.4.2.14, 64-bit version.
But, install procedure fail on 'Start java engine', error message is
ERROR 2007-06-23 19:01:43
CJS-30150 Java processes of instance PD1/DVEBMGS03 [ABAP: ACTIVE, Java: UNKNOWN] did not reach state PARTRUNNING after 20:30 minutes. Giving up.
ERROR 2007-06-23 19:01:43
FCO-00011 The step startJava with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_StartJava|ind|ind|ind|ind|4|0|startJava was executed with status ERROR .
I found no process exist on 'J2EE Process Table' tab in the sapmmc, but ABAP instance running perfectly.
Therefore, I follow notes 723909 to modify server's JVM parameter through J2EE configtool.
-Xmx2048m
-Xms2048m
-XX:NewSize=320m
-XX:MaxNewSize=320m
-XX:MaxPermSize=256m
-XX:PermSize=256m
Any suggestion would very appreciate.

I use Oracle DB, but I have the same problem.
The Server do not start.
I can see this error in file dev_bootstrap:
[Thr 2420] JLaunchIStartFunc: Thread 2420 started as Java VM thread.
[Thr 2420] *** ERROR => DlLoadLib: LoadLibrary(jvm.dll) Error 193 [dlnt.c       237]
[Thr 2420] *** ERROR => Can't load VM shared library (jvm.dll) (rc=-2) [jhvmxx.c     1576]
[Thr 2420] **********************************************************************
ERROR => Cannot load the Java VM shared library.
Please see SAP Note 943602 , section 'Java VM shared library issues'
for additional information and trouble shooting.
[Thr 2420] *** ERROR => Cannot load DLL for Java VM [jlnchxxi.c   717]
[Thr 4944] Fri Feb 08 07:52:12 2008
[Thr 4944] JLaunchCloseProgram: good bye (exitcode = -2)
Note 943602 or 940893 do not help me.
Any suggestion?
thanks.
Giorgio Peressin

New gauge installed ... restart server and ... always old gauge

Hello,
I want to modify the specfic gauge as described in the following link:
http://www.adobe.com/devnet/flex/articles/customized_gauge.html
In this tutorial, author speak to restart server to take into account new files.
I restart J2EE server ... and i see always the old gauge ...
Any suggestions ?
Thanks
Rodolphe

Hi Govindu,
This tutorial works only with compiler Flex 1.5.
With Flex 2.0 i have the old basic gauge.
I think there are other files which control the gauge with Flex 2.0 ... and where there are ?
Thanks
Rodolphe.

Can't install 9i to Win2003

I have a set of Oracle 9i Database, and I want to install it into Win2003 server. Why can't I install it? After the I click the setup icon, it get no response.

The newest version on the download page is 9.2.0.2 for Windows Server 2003 64-bit. If you have downloaded this, you must really have Windows Server 2003 (not Windows 2000 or XP) on your machine and it must be the 64-bit version. Otherwise the installation will fail. If you have Windows Server 2003 32-bit on your machine, you must download 9.2.0.1 for Windows Server 2003 32-bit and if you have Windows 2000 or XP, you must download 9.2.0.1 for Windows NT/2000/XP .

Not able to install IIS on Windows Server 2012

I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.

Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

How to install PEAR on Linux server

Hi
I have PHP installed on one linux server and developers are using it already. I have been given the task to get the oci8 (oracle connectivity) done on this same server. I can not do the reinstall of whole PHP again. During the install of OCI extention I got many errors for missing PEAR files.
So I went through the PEAR document and found "php go-pear.php" command to install the PEAR package. This command fails with below error.
download of http://pear.php.net/get/PEAR?uncompress=yes failed: Failed to parse address "" (0)
The problem is this Linux box does not have direct internet connectivity so I had to download all the required packages as per go-pear.php on my local machine and I am FTPing them to this linux box. I have kept the "PEAR-1.8.1.tar" file in the same directory where go-pear.php file exists but still the above command tries to download it from internet.
Could you please tell me how can I overcome this problem. Please let me know if there are any RPM's that I can use to install PEAR rather that "php go-pear.php" command.
Thanks
Shelly

Hi CJ.
It has been more than 4 weeks that I am strugling to get PHP-Oracle work on my system. You are the only hope right now. I have gone through so many articles and white pages that I am totally confused and starting to hate PHP or actually Suse Linux. :-)
Below are the details of my system.
more SuSE-release
SUSE LINUX Enterprise Server 9 (i586)
VERSION = 9
PATCHLEVEL = 4
rpm -qa php* No results
rpm -qa ph* --No results
rpm -qa oracle*
oracle-instantclient-devel-10.2.0.4-1
oracle-instantclient-basic-10.2.0.4-1
* which php*
*/usr/bin/php*
* php -version*
PHP 4.3.4 (cli) (built: Jan 17 2008 09:55:23)
Copyright (c) 1997-2003 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2003 Zend Technologies
This is what I see on my system
*/usr/bin> ls -l |grep php*
-rwxr-xr-x 1 root root 100308 2008-01-17 05:03 asp2php
-rwxr-xr-x 1 root root 1392441 2008-01-17 04:55 php
-rwxr-xr-x 1 root root 684 2008-01-17 04:55 php-config
-rwxr-xr-x 1 root root 593 2008-01-17 04:55 phpextdist
-rwxr-xr-x 1 root root 2082 2008-01-17 04:55 phpize
/usr/bin> whereis php
php: /usr/bin/php /etc/php.ini /usr/lib/php /usr/include/php /usr/share/php /usr/share/man/man1/php.1.gzI see that PHP is already installed on my system which is version PHP 4.3.4.
Question.
1) Do i have to upgrade the PHP version to the latest to get OCI8 configured?
2) If the answer to the above question is Yes than could you point me to any reference doc?
3) If the upgrade is not needed, how can I configure PHP to use OCI8 to connect to database?
Thanks in advance
Shelly

Connection between oracle 9i server and oracle 9i client

hi there,
i have installed both oracle 9i server and oracle 9i client in my system.how can i connect these two to have connection between these server and client?
Because i was using only 9i server for creating database and for other purposes.i have not used 9i client yet.
Please write me the answer.
Thanks in advance.

Hi Balu,
If you have the Oracle 9i Client, you can just edit your TNSNAMES.ora file of your client to have a TNS Entry for your new Database & try connecting it. You just need to try TNSPING & ensure that you can reach the Listener.
Are you facing any specific problems ?
Regards,
Sandeep

Business Process Repository Server and Business Process Publisher

Hello,
How to install "Business Process Repository Server" and "Business Process Publisher"?
Tanks
Daniela

Hi,
Both business publisher and process repository are available in CD2 of BPA Suite complete (for windows OS).
Important step before installing the business process repository is that you must have installed the database. Or else you must have installed BPA with OracleLite or XE database. At the time Business process repository installation you need to choose the database option 1 if Oracle enterprise data base is installed, else you may choose option 2 which says you already have BPA installed with database.
regards,

How to utilise forms installed in Oracle9i Application Server from client

Dear Friends,
I have installed Oracle 9i Application Server and Forms 5.0 Reports 3.0 in the application server. How to make use of application server so that forms installed in it available to end users, the client. What are the steps i need to do. Please explain.

Forms 5 & Reports 3 in Developer 2.1 have been desupported for a number of years now. If you haven't already figured out how to get it working on the web, download the Forms & Reports Services Standalone version of the 10g Application Server. It has Forms & Reports properly configured after the instalaltion. Just look under the Demonstrations tab of the home page and click to run either Forms or Reports on the web. You can customize your setup afterwards for your application. Of course you'll need to upgrade your application.
You can find this download at:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
under "Forms & Reports Services Standalone"
It is a 1 CD download.
Cordially,
Steve

How to integrate Apache Web Server and Apache Tomcat 4.0 ?

<pre>
Hi All,
Can anyone give me a detailed description(or url that tells so) of how to install the Apache Web Server, Apache Tomcat Server4.0 and Integrate both of them.
Still now I am using Apache Tomcat 4.0 as a standalone application and now I want to learn how to install,use Apache Web Server and integrate this with Apache Tomcat.
Please point me to exact location,url to download the recent Apache Web Server and,
Can I use my existing Standalone Apache Tomcat 4.0 to integrate this with Apache Web Server that I am going to download.
A detailed explanation of how to integrate both is very helpful.
Thanks in advance.
<pre>

The way to integrate Apache Web Server & Apache is very easy. The first step is download the library to connect both servers. This library can be download from http://jakarta.apache.org/builds/jakarta-tomcat-4.0/release/v4.0/bin/webapp-module-1.0-tc40-windows.zip.
Copy the files to APACHE_HOME\modules and open httpd.conf to change any lines:
You find the section "LoadModule" and you add the next lines:
LoadModule webapp_module modules/mod_webapp.so
AddModule mod_webapp.c
And the end of the file you must add these lines:
WebAppConnection conexion warp localhost:8008
WebAppDeploy examples conexion /examples
The first parameter -2nd line- (examples) is the URL name application, the second is the connection's name and the last parameter is the application's name. This name is the same which in servlet.xml.
At last you can add one more lines to check the module's configuration:
WebAppInfo /webapp-info
If you visit http://<yoor_host>/webapp-info you can see the configuration.

Building Flex Application with Flex Builder installed in a remote server

Building Flex Application with Flex Builder installed in a remote server and different developers accessing it via VNC etc
I have a requirement as below..........this is mainly to look for a solution where we can see a environment.............where we can stop developer to install flex builder locally, download/check out code locally and work locally ..............Please have a look ........
1. There is Remote Server hosting our source code say 1st Remote Server
2. There is another 2nd Remote Server which support workspace for each user
3. Flex Builder installed in the 2nd Remote Server
4. Each Developer connects to the 2nd Remote Server via VNC etc log in to their workspace
5. Each developer check out code in their workspace by connecting to 1st Remote Server.
6. Start Flex Builder instance which is running in the 2nd Remote Server
5. Each developer open source code modifies, build application in their workspace and check
Do anyone have any idea whether this kind of environment is possible in Flex or can anyone suggest something which is almost close to this ? I heard Cloud Computing is something that world is looking to represent this kind of solution .............not sure though

Hi
The concept of cloud computing is not even very clear to me
I think this is what I understood about it ...........from this link http://communication.howstuffworks.com/cloud-computing.htm
It says
"Instead of installing a suite of software for each computer, you'd only have to load one application. That application would allow workers to log into a Web-based service which hosts all the programs the user would need for his or her job. Remote machines owned by another company would run everything from e-mail to word processing to complex data analysis programs. It's called cloud computing, and it could change the entire computer industry"
"There's a good chance you've already used some form of cloud computing. If you have an e-mail account with a Web-based e-mail service like Hotmail, Yahoo! Mail or Gmail, then you've had some experience with cloud computing. Instead of running an e-mail program on your computer, you log in to a Web e-mail account remotely"
My issue is not with the license. The solution that I am looking for is
1. Don't want the developer to download the source code in any fashion either checked out or anything else in the local machine
2. Want the developer to work directly on the server
3. Looking for a solution where each developer is not required to install Flex Builder locally and the developer can use Flex Builder that is installed on the server and in his workspace and create/modify build on the server itself
Hope I could make you understand this time ................
Regards
Biswamit

Installing 9i on win2003 server and patch 9.2.0.6

Similar Messages

Maybe you are looking for