Installing 9i on windows 2003 server

i am trying to install oracle 9i on windows 2003 server, but i got an error message, like the following...
"There are no patches that need to be applied from the patch set Oracle 9iR2 Patch set 9.2.0.3.0."
i can't find a version(9.2.0.3) for windows 2003 server(32bit) on oracle download section. I think that windows 2003 server doesn't support the Oracle 8i(8.1.7), either.
can someone help me install Oracle 8i or 9i on windows 2003 server?
Thanks...

I'm not sure there is a supported version for your O/S but if there is you will find it by going to the downloads page at http://otn.oracle.com.
If there isn't I'd recommend going with a currently supported version of the product rather than one whose full support has ended.

Similar Messages

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Can't install ITunes on Windows 2003 server (WHS box)

Hi,
I can't install the latest ITunes because it incorrectly mistakes my Windows 2003 server as Windows XP. So after search I find that I can change the MSI files as according to this thread: http://discussions.apple.com/thread.jspa?threadID=2154140.
This seems to work for all MSI file sin the ITunes etup exe except for this: AppleMobileDeviceSupport.msi. If I change the MSI LaunchConditions it gives my error 2229 no matter what.
So I'm stuck. Should I call Apple next?

I can't help you with the error you get, but just to clarify while iTunes isn't "officially" supported for use on Server 2003, it does work. Sort of. iTunes 8 could be installed by editing the MSI, iTunes 9 however while this method is still required you'll run into a problem with iPodService.exe crashing, and iTunes refuses to finish the install until that service is up and running.
There are a few topics on here that detail what you can do to get around this problem. I believe currently the only tried and tested method is to use the iPodService.exe from iTunes 8, doing a swap trick when the iTunes 9 service crash occurs so that you can at least get the application to install.
I can't be bothered to go to the trouble though. I'm interested in seeing if Apple will silently stop with the BS and just fix the installer's version mismatch errors (easily done), and fix iPodService.exe. The reason why the service crashes, according to what I've read, is because it seemingly misidentifies Server 2003 and similar OS's as Vista or Windows 7, and then begins calling functions for those OSs from ntdll.dll - which causes the crash.
As for your error, presumably that is with Orca. All I could find relating to the errors is something about transforming the MSI and language translations. It could also be because of an older version of Orca. Perhaps try and re-download iTunes, and extract the MSI packages again. But you should only need to edit the LaunchCondition for AppleMobileDevice.msi - and you don't need to delete the table either, you can simply change the number in NTVersion from 501 to 502, save the package and it'll all work. It did for me when I first tried it anyway.

Install R12 on windows 2003 server 64bit

Hi Experts,
I need to install Oracle Apps R12 on windows 2003 server 64Bit.
what are all the steps should be followed to install Apps R12 on win 2003 server 64bit,
Please help me to do this,
Thanks
Sundaravel.R

Oracle E-Business Suite R12 Installation on Windows 2003
http://onlineappsdba.com/index.php/2007/02/20/prepare-for-oracle-apps-r12-installation/
HTH
Aman....

Install ECC6 in Windows 2003 server Spanish

opinion about install ECC6 in windows 2003 standar in spanish.
thanks.

Hi Consultor
I'm from mexico, an our experience is:
1) Install in english language as default
2) With the Transaction code I18N and SMLT, you could add the spanish language.
3) Set default language as Spanish in the profiles
Check the parameters: zcsa/installed_languages and zcsa_system_language
Please reward points if helpful
Regards

LJ P2055dn install crashes on Windows 2003 server

Trying to add LJ P2055dn printer into our Windows network, need to load it onto a terminal server. However, PCL6 driver downloaded from HP keep crashing during install. Please help.

Oracle E-Business Suite R12 Installation on Windows 2003
http://onlineappsdba.com/index.php/2007/02/20/prepare-for-oracle-apps-r12-installation/
HTH
Aman....

Problem in installing Oracle 9i R2 on Windows 2003 Server Enterprise

We are having problem installing the Oracle 9i R2 Server on Windows 2003 Server Enterprise Edition. During installation, it generates error saying "The IP Address of the machine not found". When clicking the "Continue" button, it tries to install other things but few minutes later it asks to stop complete installation or installation of that feature.
But when we installed it on Windows XP it works fine and we have no problem in configuring it. What's the problem with Windows 2003 Server?
If we drop the idea of installing it on Windows 2003 Server, can we make Windows XP maching as a Server?

ORACLE asumes that the first network device you have on your server has a fixed IP address.
Is this the case?
If not so you should install a loopback adapter as network device with a fixed IP.
Does this help?
Regards,
Lutz

Installing Photoshop in a Windows 2003 server

Although Adobe only supports PS installation on Windows XP or Vista, is there a way to get it installed on a Windows 2003 Server operating system?

Search the forum. There's a hack that's been discussed. Don't expect any
support for it though.
Bob

Installin Oracle 10g rel 2 on windows 2003 server

Hi
I am trying to install oracle10g on windows 2003 server standard edition SP1. When i run the OUI i get the following error.
OUI-10133:Invalid staging area. There are no top
level components for Windows Nt or Windows 2000 area. And i am not able to install.
Can somebody help in this.
Thanks

This is a problem with the media.
I suggest copying all the files to a local hard disk and running the installer from there. I don't have good luck installing from CD with Oracle's databases - not sure why. I never have a problem (and it's WAY faster) installing from disk. You can erase the 800 MB of files after the install if you need the space.

QT 7.1 fails on windows 2003 server. REVERTED NEEDED.

Tried to update to Itunes 6.0.5, and I've been to ****, and reverted.
Quicktime 7.1 does not install proberly on windows 2003 server.
MORE IMPORTANTLY: it will not properly uninstall.
When using the Itunes/quicktime combo, all you get is a lot of errors at restart (call MS and ask for the stack traces with Itunes in them
If you install using the standalone, then you need get the following error:
error number 0x80040707
description: DLL function call crashed: QTInstallCode.QuickTimePortInstallProc
This occurs after the dialog which lets you set the file and mime types appears.
Windows 2003 server, dual processor (not dual core), 4 gigs ram, intel sata raid
Other OS Windows 2003 Server

Not sure if you realize this is a user-to-user board.
Contact the QT folks here
http://www.apple.com/quicktime/feedback/

RoboHelp X5 and Windows 2003 server

Does enyone know if I have to change some robohelp settings
when robohelp is installed on a windows 2003 server?
I'm working on merged htm help files and since we moved all
files to a windows 2003 server, I noticed that the index and the
search function of the newly compliled files don't work anymore.
The search displays the message 'No topics found' when I perform a
search action in a newly compiled project
The index only displays the index keywords of the main
project and not the index keywords of the linked projects.
I'm looking forward for any suggestion to fix this
problem.

Welcome to the forum.
I hope you mean when robohelp output is published to a
server, rather than robohelp itself being installed on a server.
If that is what you meant, look at Snippet 57 on my
site.

OUI-25031 Cluster Configuration Assistant Fails Windows 2003 server RAC

Hi All
I am installing RAC on Windows 2003 Server X64, Dell PowerEdge 2950 Servers with iSCSI Storage.
I have 3 Network cards on each node which are configured like this
# Public
10.2.0.8 USTISDB-1.USTIS.Brgpoint.com USTISDB-1 --- in DNS
10.2.0.9 USTISDB-2.USTIS.Brgpoint.com USTISDB-2
#Virtual
10.2.0.10 USTISDB-1-vip.USTIS.Brgpoint.com USTISDB-1-vip --- in DNS
10.2.0.11 USTISDB-2-vip.USTIS.Brgpoint.com USTISDB-2-vip
#Private
192.168.2.2 USTISDB-1-priv.USTIS.Brgpoint.com USTISDB-1-priv --- in Hosts file
192.168.2.3 USTISDB-2-priv.USTIS.Brgpoint.com USTISDB-2-priv
#iSCSI Storage
192.168.1.2 Storage --- in DNS
Everything Pings everything.
When I start the installation , it installs clusterware and completes the remote operations but fails at cluster configuration window.
After checking the logs I found the list of failed commands and it says
INFO: Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
and then I checked E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands and i says
rem Copyright (c) 1999, 2005, Oracle. All rights reserved.
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
E:\oracle\product\10.2.0\crs/bin/racgons.exe add_config USTISDB-1.USTIS.Brgpoint.com:6200 USTISDB-2.USTIS.Brgpoint.com:6200
E:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:public "private"/192.168.2.0:cluster_interconnect
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "USTISDB-1,USTISDB-2" -nodevips "USTISDB-1//255.0.0.0/public,USTISDB-2//255.0.0.0/public"
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/cluvfy.bat stage -post crsinst -n "USTISDB-1,USTISDB-2"
Please help, Any help will be highly appreciated.
Edited by: user651560 on Nov 13, 2008 3:24 PM

E:\Staging\102010_win64_x64_clusterware\clusterware\cluvfy>runcluvfy stage -pre crsinst -n ustisdb-1,ustisdb-2 -verbose
The system cannot find the file specified.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "USTISDB-1"
Destination Node Reachable?
ustisdb-1 yes
ustisdb-2 yes
Result: Node reachability check passed from node "USTISDB-1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
ustisdb-2 passed
ustisdb-1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "ustisdb-2"
Interface Name IP Address Subnet
public 10.2.0.9 10.0.0.0
private 192.168.2.3 192.168.2.0
san 192.168.1.6 192.168.1.0
Interface information for node "ustisdb-1"
Interface Name IP Address Subnet
public 10.2.0.8 10.0.0.0
private 192.168.2.2 192.168.2.0
san 192.168.1.5 192.168.1.0
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
ustisdb-2:public ustisdb-1:public yes
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
ustisdb-2:private ustisdb-1:private yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
ustisdb-2:san ustisdb-1:san yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) ustisdb-2,ustisdb-1.
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
ustisdb-2 public:10.2.0.9
ustisdb-1 public:10.2.0.8
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
ustisdb-2 private:192.168.2.3
ustisdb-1 private:192.168.2.2
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
ustisdb-2 san:192.168.1.6
ustisdb-1 san:192.168.1.5
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
ustisdb-2 Windows Server 2003 Windows Server 2003 passed
ustisdb-1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
ustisdb-2 15.99GB (16771724KB) 512MB (524288KB) passed
ustisdb-1 15.99GB (16771724KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
ustisdb-2 17.4GB (18241648KB) 1GB (1048576KB) passed
ustisdb-1 17.4GB (18241648KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
ustisdb-2 64-bit 64-bit passed
ustisdb-1 64-bit 64-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.UST\LOCALS~1\Temp\1" dir
Node Name Available Required Comment
ustisdb-2 23.7GB (24848248KB) 400MB (409600KB) passed
ustisdb-1 23.65GB (24797157KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent

I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
     at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
     at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
     at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
     at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
     at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
     at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andy

sorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures

Install oracle E-business suite on windows 2003 server

hi ,
i am trying to install oracle EBS on windows 2003 server enterprise edition , i have installed these prerequisites :
1 - MKS Toolkit version 7.0
2 - JDK 1.3.9
3 - Visual C++ 2005 express edition
while checking the system with the startup disk , it is giving me an error :
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VC
D:\rapidwiz>echo off
'which' command is not available. Check MKS installation
ERRORCODE=1 ERRORCODE_END
Error- System Utilities Availability test has returned an error: 1
anybody can help please
Regards,
Chady

What is the application release you are trying to install? Please note that 11.5.10.2 RapidWiz automatically installs JDK 1.4.2 on the Solaris, Linux, and Windows operating systems.
system utilities check : - check system for make , id , ar , and cc
system utilities check : command : cmd.exe/c D:\rapidwiz\bin\checkutil.cmd C:\program files\mkstoolkit C:\program files\microsoft visual studio 8\VCInstall all pre-req. software (i.e. Visual C++, MSK, Gnumake, ..etc) in directories which contain no space in name (i.e. C:\VC, C:\MKS, ..etc. Do NOT install it under C:\Program Files). Also, when RapidWiz prompt to enter MSK directory, type "C:\MKS\mksnt".

Installing 9i on windows 2003 server

Similar Messages

Maybe you are looking for