Installing 9iAS 1.0.2.2.2 with 9iDB9.0.1.1?

Did you have successful experience installing 9iAS 1.0.2.2.2
with 9iDB 9.0.1.1 on Win2k prof SP2?
Thanks.

below are some steps you need to make to install 9iAS 1.0.2.2.1,
some of the steps are not needed for 1.0.2.2.2
install 9iAS v1.0.2.2.2 in Oracle 9i Environment (windows 2000)
9i DB <OH>: d:\oracle\ora90
9iAS <OH>: d:\oracle\iSuites
1. Delete the spfile.ora. Go to the d:\oracle\ora90\database and
delete the file spfile.ora OR you can rename it.
2. Modify the following init.ora parameters
a. db_cache_size=33554432
b. open_cursors=300
c. java_pool_size=67108864
d. large_pool_size=67108864
e. processes=200
f. O7_dictionary_accessibility=true
g. job_queue_processes=3
3.Restart the database
4. Use the JDBC lib files from the 9i Database environment to
iAS home d:\oracle\ora90\jdbc\lib to d:\oracle\iSuites\jdbc\lib
5. Remove the Oracle HTTP server from the Oracle database home
6. Resize the database tablespaces
INDX: 50 MB
SYSTEM: 550 MB
UNDOTBS: 150 MB
USERS: 200 MB
TEMP: 100 MB
Regards,
--Tao

Similar Messages

Installing 9iAS 1.0.2.2.1 with 9i Db 9.0.1

After installing 9i Db, when installing 9iAS, after the Component Configuration and Startup screen, the installation starts thens hangs with the message 'Enterprise Manager Common files Missing Dependices' Missing oracle.swd.jre1.1.8.10.0.
Any ideas, I have cleaned out my system for a restall in cluding the registries but the same problem reappears.
Any help would be greatly appreciated.
Regards Stu.

Hi Stuard,
You may want to follow the following steps to install 9iDB with 9iAS 10221.
You can also refer to the early msg disussion in this forum on the same subject.
Thanks,
Yuning
==============
below are some steps you need to make to install 9iAS 1.0.2.2.1,
some of the steps are not needed for 1.0.2.2.2
install 9iAS v1.0.2.2.2 in Oracle 9i Environment (windows 2000)
9i DB <OH>: d:\oracle\ora90
9iAS <OH>: d:\oracle\iSuites
1. Delete the spfile.ora. Go to the d:\oracle\ora90\database and
delete the file spfile.ora OR you can rename it.
2. Modify the following init.ora parameters
a. db_cache_size=33554432
b. open_cursors=300
c. java_pool_size=67108864
d. large_pool_size=67108864
e. processes=200
f. O7_dictionary_accessibility=true
g. job_queue_processes=3
3.Restart the database
4. Use the JDBC lib files from the 9i Database environment to
iAS home d:\oracle\ora90\jdbc\lib to d:\oracle\iSuites\jdbc\lib
5. Remove the Oracle HTTP server from the Oracle database home
6. Resize the database tablespaces
INDX: 50 MB
SYSTEM: 550 MB
UNDOTBS: 150 MB
USERS: 200 MB
TEMP: 100 MB

Problems installing 9iAS on NT4 SP 6

I'm trying to install 9iAS on an NT4 SP6 platform, with the database (Oracle 8.1.7) on a Sun Solaris platform.
Immediately after the installation program creates the wireless account on the database, the install just stops and doesn't launch the Configuration Tools program or remove the "Install Oracle 9I AS" icon from the Startup folder. Also, there also doesn't appear to be any component of the "Oracle HTTP Server" in the NT Services
Had posted this originally on Metalink, but was told since I downloaded the iAS from Technet (4/26/01), I need to post questions to this forum. SO: Was told "The hang after the wireless install completes is a know issue. Unpublished Bug: 1643172 ". What do I need to do to work around this bug?
Thanks,
- Bill Waye
DBA
null

In looking at the inventory via Oracle Universal Installer, it's 1.0.2.1.0.
Thanks much,
- Bill

Problems with installing 9ias infrastructure

Iam trying to install oracle 9ias application server on a windows 2000 professional edition.
so before installing application server iam trying to install 9ias infrastructure.
my initial attempts have failed so iam trying to reinstall it again after deinstalling the existing infrastructure.
the error iam getting is that the user who installed earlier is different from current user.
i use only one account on the machine. how can i correct the problem.
thanks
chakri

The server has 2 500mhz Pentium Processors.
Actually, I was able to bypass the issue by forcing the OUI to use 1 processer (Note 229478.1), but I am now having issues with the Infrastructure Schema Configuration Assistant. Even though it says it succeeded, the log says otherwise.

Succes installing 9iAS R2 (release 2) on RedHat Linux 7.3

I had success installing 9iAS release 2 on RedHat Linux 7.3. I used the instructions on http://www.puschitz.com/OracleOnLinux.shtml.
At first, I tried this on RedHat 8.0. Funny thing is: installation of infrastructure failed even though I followed the instructions. Then I downloaded 7.3, followed EXACTLY the same instructions and voila, works like a charm.
Puschitz' instructions are for 9i and not for 9iAS though. Some additions:
1) One of the pre-installation steps there says to set some environment variables, one of them being the SID. It's set to 'test', but of course with standard settings the sid of the database that comes along with 9iAS has a SID of 'iasdb'.
2) Also what I did, was to downgrade the binutils package to the version provided by Oracle here: http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html. As an alternative, Puschitz says to change some makefiles. I didn't try this.
3) I then installed the infrastructure. When finished, I exited the installation and rebooted. After the reboot:
4) I changed to the /bin directory and typed (as root):
ln -s /sbin/fuser
5) Changed back to user 'oracle' and started the infrastructure with:
$ORACLE_HOME/bin/sqlplus
connect / as sysdba
startup
exit
$ORACLE_HOME/bin/lsnrctl start
$ORACLE_HOME/bin/oidmon connect=iasdb start
$ORACLE_HOME/bin/oidctl connect=iasdb server=oidldapd instance=1 start
$ORACLE_HOME/opmn/bin/opmnctl startall
6) Then started the installer and did the middletier installation. Rebooted.

Following your instructions i've also succesfull installation of ias9iR2 Infrastructure on Redhat7.3. Checked the database Iasdb and Enterprise Manager Website (on http://liminwang:1810), everything works fine. Hence i try to install Portal & Wireless on the same machine on a different Oracle_home (but on the same Oracle_base) according to the installation guide. The installation stuck when i've chosen the Portal and Wireless option. I get a warning that the Enterprise Manager Website Process is still running and it must be stopped to proceed the stallation. So i stopped this process by: $oracle_home/bin/emctl stop
Still i get the same warning. Stopping the database also doesn't help. Even when i deinstalled the Enterprise Manager Website component i get the same warning.
Please help!

Installing 9iAS 1.0.2.2 (Portal) on 9i database

Installing 9iAS 1.0.2.2 on 9i database and getting an
error: "ORA-04031: unable to allocate 40972 bytes of shared
memory ("large pool","unknown object","koh-kghu sessi","pl/sql
Errors encountered in the Install process. Installation
Aborted."
Error occured on 49% of installation process of Portal
configuration!!!!
Anyone have any ideas?
Thanks,
Janez

I had the same problem. Try this:
Please see if the Windows NT 4.0 Option Pack is installed. You can normally see
this in Control Panel, Add/Remove Programs.
There are two solutions/workarounds:
Solution One: Make a Registry Export
1. Start REGEDIT. Navigate to the key HKEY_LOCAL_MACHINE\Software\
Microsoft\Transaction Server\Setup(OCM)
2. Choose Registry, Export Registry File. Select to export the current branch.
3. Enter a filename, e.g. pre-ias.reg
4. With 'Setup(OCM)' highlighted, press the Delete key. At the 'confirm key
delete' prompt, answer Yes.
5. Install the 9i Application Server.
6. Re-establish the registry key by double clicking the filename you created.
Solution Two: Uninstall the Option Pack
This solution takes more time, but if you don't need the Option Pack you can
remove it.
Remove the NT Option Pack, install 9iAS, then you can install the Option Pack
again.
Explanation
It appears that the Universal Installer hangs on a specific registry key that
belongs to a component of the Option Pack.
null

EXPERIENCE Installing 9iAS r2 on RH 7.3 or Suse 8 ?

Hi:
Anyone have experience installing 9ias r2 on RH7.3 or Suse 8 ?
I would prefer RH 7.3!
If anyone know the tricks and steps to get it installed please post them here gently :)))
Thanks in advance.

Hello
I did a clean install with suse 8.0 . This is my configuration and basic installation steps.
Installed suse8 with pdksh (k shell, will not install by default )and Swap space 1GB
The hostname and IP adrress was in /etc/hosts file (Some shell scripts hardcode IP, Lot of problems when try to change IP address after installation)
Created iasdba group (didnt use the oracle user comes with suse)
Created ias user (made the home directory as /u1/ias , u1 is another mount point or can be a subdirectory under root )
logged in as ias user and set all env variables (created a shell script called set_ias_inf and put everything in it)
Install the infrastructure first (watch for the creation of genclntsh in $ORACLE_HOME/bin directory, as soon as it created from installation , made the following modification in the line starting with SYSLIBS, added the following line after -lc ,
-lgcc -L/usr/lib/gcc-lib/i486-suse-linux/2.95.3/
Installation completed and all required services started without any problem
To check did http://server:1810 and connect to em with ias_admin and passwd
stop the em from the suse box
emctl stop
Login as ias and created another shell script called set_ias_as (copied from the previous one and change the ORACLE_HOME to /u1/ias/90200/as for AS installation
Completed the AS installation with everything and did the same change as INF installation
Select the default character set
select the instance as instance2
Completed the installation
All services started successfully
HTH
Santhoshkumar M Nair

Very urgent plz installed 9ias but shows nothing

dear fellow i have installed 9ias on win2k adv server member server of a domain
when installing system has stoped after having 100% i restarted the system and it started again installtion and completed successfully but it did not do any thing when i start run form from the web it
says http 404 file not found error of iis please tell me what to do.
when i create sevice from isuite---> NETWORK ADMIN --> NET8 EASY AND CREATE A SERVICE AND TEST IT IT SAYS CONNECTED BUT WHEN USE SQL IT SAYS TNS COULD NOT RESLOVE SERVICE NAME ANY HELP
PLZ
forms config file says
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory E:\Oracle\806\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory E:\Oracle\806\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory E:\Oracle\806\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory E:\Oracle\806\JINIT.
plz tell me where to find these variables so i can set them
thanx
at least tell me why jinit did not call why it gives me blank page

imran thanks for ur invaluable i help
i did what u told and see
Error: The requested URL was not found,
or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
when i go to services and try to start service for report it gives me error
The oracle report server (rep60_<machine> service returned >service specific error 186
i have created a service throu start program isuite >net8easyconfig and tested that service come with success and then copied that tnsname to 806 net80 folder but in no vain any help Ms. Geeta Kapoor....
Yes, obviously you will get this "Error: The requested URL was not found, or cannot be served at this time" as the service is not ready to serve your request.
I never told you to create a TNS Name/service name ........ At the time of installation of the Application Server the Universal Installer creates a service name for Reports Server and stores it in the tnsnames.ora of the 9IAS ORACLE_HOME which is, for eg. c:\iasora\app\oracle\product\9ias\6iserver, but the actual $ORACLE_HOME is c:\iasora\app\oracle\product\9ias\ when you start the reports server it will look in the tnsnames.ora in c:\iasora\app\oracle\product\9ias\6iserver\network\admin folder, when it checks for the service name it will not find it and gives an error.
So for this purpose I asked you to copy the parameter in the Reports c:\iasora\app\oracle\product\9ias\6iserver\network\admin\tnsnames.ora and paste it in c:\iasora\app\oracle\product\9ias\network\admin\tnsnames.ora
Did you edit your $ORACLE_HOME/6iserver/conf/6iserver.conf and specified to process the reports by rwcgi60.
Regards,
Imran Hakeem

Error while installing 9iAS

I tried to install 9iAS-Infrastructure first. Installation completed but hanged while linking.
Later decided to install J2EE & Web Cache option of 9iAS with out the infrastructure.It stopped while setting up install types after 23% of progress, with message:'An error occured while trying to determine the running process'. I hit continue and a dependencies screen came up with a following message : ' oracle 9iAS installation has detected that the Enterprise Manager website is running on this system. Install cannot continue unless it is shutdown. Unset ORACLE_HOME and run the command emctl stop under the bin directory of the 9iAS infrastructure home directory...' I did not type exactly but that is the main point.
But Infrastructure installation did not go through and i have completely removed all the files from the location where it placed files during its installation.
I am not sure from where Installer is finding this Enterprise Manager website and the emctl command.
I did unset ORACLE_HOME env variable before starting the installation.
Any idea how to clean up.
Thanks
RK

Sorry for the delay in replying. I am trying to install 9iAS on Red Had Linux 8. I looked into /var and i don't see anything related to oracle. the directory under which 9iAS infrastucture was being installed, i removed the entire directory in the process of cleaning up. Still not able to install ias & web cach option.
Can i try to download Red Hat 9 and do a fresh install. I saw few people have sucessfully installed it.
Or should i have to go for the Advanced server which is a bit costly for me. I know that is what Oracle recommends to use or on the SuSe flavor.
Thanks - RK.

Problem install 9iAS -

Hi All,
I am trying to install 9iAS (9.0.3) on my win2k Pro machine - and got weird problem.
First time I installed, everything went ok and worked fine. - However, since I have Oracle8i installed before and somehow Toad was screwed after 9iAS installation, I de-installed 9iAS (using Universal Installer come with 9iAS CD)
Weird problem happens ever since - it always pop up error (at 30% of "Setting up Install Types" bar):
All Oracle9iAS installations on a host must be installed by the same operating system user. The initial Oracle9iAS installed at ... was installed by a different operating system user. .....
The problem is that I definetely used same user name (indeed, besides admin, I am the only user who can login to this machine)
Any suggestions will be appreciated!
Warren

I cleaned registy many times using regedit (deleted anything related to 9i)- no use
I have 8.1.7 installed, and when install 9ias, error message says there's a previous 9i installation at my 8.1.7 directory (C drive) by different user - not make sense
because (1) the first time I install 9i, I put 9ihome in D drive. (2) I install 8.1.7 using same username
The only thing changed is the user password to login to my computer. It's really weird.

Trying to install 9iAS 1.0.2.2.1 on Win2000

Universal Installer cant install the product. We are getting an
error like: "cant find oracle.swd.jre 1.1.8.10.0" But on the CD1
there is oracle.swd.jre 1.1.7.30. Can anyone help us?

Better yet: I found this from one of the forums, it has
something to do with the 9iAS using an older version of 'jre
something' than the 9i database... here it is: I am going to
try it myself....
Title : error installing 9ias using 9i database O/S : MS
Windows
Author : Mark Hartmann Type : Answer
Date : Nov 22, 2001 06:39 PT
POST :REPLY (W/QUOTE)
Hi !
I had the same problem before I had a look into this forum. But
it seems i found a way around this problem:
1. I have all the required files copied from CD to my harddisk
(disk1, disk2 and disk3).
2. I copied the required "jre_1.1.8"-files from the Oracle9i-DB
CD 1 stage directory into the stage directory of "Disk1" and to
be sure to the other stage dir in the "install" directory.
3. I use the OUI 2.0 which has been installed with the database.
With this I got around this message. Hope this helps anyone.

Install 9iAS 1.0.2.2.a on XP

hi,
anybody has success with AS installation on XP? i cannot see the point why should i install db at least twice (9.x, 8.1.7, 8.0.6, ...) and why is j2sdk, jre is need to be installed multiple instances.
- oracle agent cannot srart up (no SNMP master, what's missing?)
- there is two HTTPD
- cannot set the DAD connect string for 9iAS
i was reading hundreds of pages, mainly preinstallation tasks. trying to deinstall and reinstall after and have to clean up the registry manually (and the folders as well).
so the Q is: is there any complete book (howto) about to install a 9iAS on my XP which includes all the steps suggestion, and not like this, enter "DAD name:", and the help says ("enter the DAD name").
thx

Better yet: I found this from one of the forums, it has
something to do with the 9iAS using an older version of 'jre
something' than the 9i database... here it is: I am going to
try it myself....
Title : error installing 9ias using 9i database O/S : MS
Windows
Author : Mark Hartmann Type : Answer
Date : Nov 22, 2001 06:39 PT
POST :REPLY (W/QUOTE)
Hi !
I had the same problem before I had a look into this forum. But
it seems i found a way around this problem:
1. I have all the required files copied from CD to my harddisk
(disk1, disk2 and disk3).
2. I copied the required "jre_1.1.8"-files from the Oracle9i-DB
CD 1 stage directory into the stage directory of "Disk1" and to
be sure to the other stage dir in the "install" directory.
3. I use the OUI 2.0 which has been installed with the database.
With this I got around this message. Hope this helps anyone.

Help: problem trying to re-install 9iAS Infrastructure

I'm using Windows 2000.
A while ago I installed 9iAS Infrastructure, and later I deleted the entire installation.
Since then, I have changed my computer's name. Now, when I try to re-install the Infrastructure, I'm getting an error message which says that I must use the same user login to install the Infrastructure as I originally used. I'm getting this message even though I deleted all the files (that I'm aware of) associated with the original installation, so, clearly, my computer still has a "memory" of the deleted installation somewhere.
Can you please tell me which additional file or files I must delete from my system to destroy this trace of the original installation? Please note that I am using the same downloaded files now to try to perform the installation as I originally used.
Thank you for your assistance.
Hugh

Hugh, here's the info you wanted:
PURPOSE
This article describes the procedure how to manually perform the actions to
create a "clean machine" on Microsoft Windows 95/98/NT/2000/XP and how to
manually remove all Oracle components (e.g.: oracle RDBMS database server,
IAS, OEM, client installations, etc) and services from your computer.
SCOPE & APPLICATION
This article is intended for DBA's on the Microsoft Windows platform.
WARNING:
1. Remove all Oracle components from your computer only as a last resort,
and only if you want to remove ALL Oracle components from your system.
2. These instructions remove all Oracle components, services, and registry
entries from your computer. In addition, any database files in the
subdirectories under ORACLE_BASE\ORADATA\ are also removed.
3. These procedures will also remove Oracle network configuration files,
user written scripts and any other user generated files that may be stored
in Oracle_Base directories.
4. Exercise extreme care when removing registry entries. Removing incorrect
entries can severely compromise your computer.
MANUALLY REMOVING ALL ORACLE COMPONENTS AND SERVICES FROM YOUR COMPUTER
Section A (steps 1-6) describes the removal of all Oracle components on
Windows NT,2000 and XP.
Section B (steps 1-4) describes the removal of all Oracle components on
Windows 95 and Windows 98.
A. Removing Components on Windows NT/2000/XP.
To remove all Oracle components from a computer on Windows NT/2000/XP:
1. Check privileges:
1.a. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle services (if any are running):
2.a. NT: Choose Start > Settings > Control Panel > Services.
2000,XP: Right click My Computer > Manage > Services and Applications >
> Services
2.b. If any Oracle services (their names begin with Oracle) exist and have
the status Started, select the service and click Stop.
2.c. Click Close to exit the Services window.
2.d. Close the Control Panel/Computer Management window.
3. Remove the entries in the Windows registry:
3.a. Start the registry editor:
Choose Start > Run > regedit
Note: On Windows NT you can use regedt32 instead. The searching
capabilities of regedt32 is limited compared to regedit. It will be
needed to be able to edit 32-bit entries in the registry. Since we
are not going to update any 32-bit entry it is not needed.
3.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the
Oracle Universal Installer (OUI). The default location is
C:\Program Files\Oracle\Inventory. If this value is different, make
note of it, so we can delete these files later.
Delete this ORACLE key.
3.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver"
3.d. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services and remove
all keys under here that begin with ORACLE or ORAWEB.
3.e. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\...
...\Application and remove all keys under here that begin with ORACLE.
3.f. Go to HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\...
...\Uninstall and remove any entries related to Oracle.
3.g. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
3.h. Close the registry.
4. Clean up the environment settings:
4.a. NT: Choose Start > Settings > Control Panel > System > Environment tab
2000,XP: Choose Start > Settings > Control Panel > System > Advanced tab >
Environment variables.
4.b. At "System Variables" click on the variable PATH in order to modify
the value. For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;C:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN
4.c. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
4.d. If JRE was installed by Oracle, remove the JRE path.
4.e. If there is a CLASSPATH variable under "System Variables", first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
4.f. Check if there are any other Oracle variables set in "System Variables",
ORACLE_HOME, ORACLE_SID, TNS_ADMIN, JSERV or WV_GATEWAY_CFG. If these
exist, delete them also.
4.g. Click on APPLY and OK.
4.h. Close the Control Panel window.
5. Delete the software and icons:
5.a. NT: Choose Start > Programs > Windows NT Explorer.
2000,XP: Choose Start > Programs > Accessories > Windows Explorer.
5.b. NT: Go to %SystemDrive%\WINNT\PROFILES\ALL USERS\START MENU\PROGRAMS
2000,XP: Go to %SystemDrive%\DOCUMENTS AND SETTINGS\ALL USERS\...
...\START MENU\PROGRAMS
Note 1: These locations depend on whether OS was upgraded from NT, or
this was a fresh install of 2000/XP.
Note 2: To locate your System Drive, type in DOS-box: echo %SystemDrive%
and delete the following icons:
- Oracle Installation Products
- PRODUCT_NAME - HOME_NAME e.g.
Oracle for Windows NT - Dev6i
Oracle Reports 6i - Dev6i
Oracle Olap Client 2.2 - Dev6i
Oracle9i Lite
Oracle - OraHome92
5.c. Go to %SystemDrive%\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 3.b. and delete this directory.
Note: In order to successfully delete all files, you may have to reboot
your computer first, in order to clear Operating System locks
on those files.
5.d. Go to the temporary directory and delete all files and directories in here
(see note in 5.c.).
NT: %SystemDrive%\Temp
2000,XP:
%SystemDrive%\Documents and Settings\<username>\Local Settings\Temp\
5.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive (see note in
5.c.).
5.f. Close the Windows Explorer / Windows NT Explorer.
6. Finish the removal:
6.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin.
6.b. Reboot your computer.
6.c. Optionally: If you are on Windows 2000 or XP run the System Defragmenter
utility:
- from Control Panel, select Administrative Tools > Computer Management
- expand Storage, then select Disk Defragmenter
- highlight each virtual drive, in turn, and click Defragment
- reboot your computer when finished.
B. Removing Components on Windows 95 or Windows 98.
To remove all Oracle components from a computer on Windows 95/Windows 98:
1. Remove the entries in the Windows registry:
1.a. Start the registry editor at the MS-DOS command prompt:
C:\> REGEDIT
1.b. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
Note the value of the key INST_LOC, this is the location of the Oracle
Universal Installer. The default location is
C:\Program Files\Oracle\Inventory
If this value is different, make note of it, so we can delete these files
later. Delete this ORACLE key.
1.c. Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC and expand all subkeys and
remove all keys under here which are related with the
"Oracle ODBC Driver".
1.d. Go to:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall
and remove any entries related to Oracle.
1.e. Go to HKEY_CLASSES_ROOT, remove all keys that begin with Ora or ORCL
(e.g. Oracle..., ORADC..., ORAMMC..., OraOLE..., OraPerf... and ORCL...).
1.f. Close the registry.
2. Clean up the environment settings:
2.a. Open your AUTOEXEC.BAT with an editor to modify the PATH variable.
For example, you may see a path similar to this one:
C:\ORACLE\ORA81\BIN;G:\PROGRAM FILES\ORACLE\JRE\1.1.7\BIN .
2.b. If an %ORACLE_HOME% was installed, remove this %ORACLE_HOME%\BIN path.
2.c. If there is a CLASSPATH variable set in the AUTOEXEC.BAT, first make note
of the path defined, then delete it. This variable can be added back at
a later date if needed.
2.d. If JRE was installed by Oracle, remove the JRE path.
2.e. Save the AUTOEXEC.BAT file and close the edit.
3. Delete the software and icons:
3.a. Choose Start > Programs > Windows Explorer.
3.b. Go to SYSTEM_DRIVE:\WINDOWS\START MENU\PROGRAMS
and delete the following icons:
- Oracle - HOME_NAME
where HOME_NAME is the previous Oracle home name.
- Oracle Installation Products
3.c. Go to SYSTEM_DRIVE:\Program Files\Oracle or the location of INST_LOC as
noted earlier in step 1.b and delete this directory.
3.d Go to SYSTEM_DRIVE:\Temp and delete all files and directories in here.
3.e. Go to the drive where the Oracle software is installed on your machine
and delete all ORACLE_BASE directories on your hard drive.
3.f. Remove any Oracle-related .INI files that may exist in the Windows
directory. The Windows directory may be found by entering
"echo %WINDIR%" from a command prompt.
Typical Oracle .INI files include ORADIM73.INI, ORADIM80.INI,
ORACLE.INI, ORAODBC.INI
3.g. Close the Windows Explorer.
4. Finish the removal:
4.a. Empty the recycle bin
Right click on recycle bin > Empty Recycle Bin
4.b. Reboot your computer.
RELATED DOCUMENTS
Oracle Installation Guides for Windows.
SEARCH WORDS
WIN95, WIN98, WINNT, WIN2000, Windows95, Windows98, WindowsNT, Windows2000,
de-install, deinstall, re-install, reinstall
Copyright (c) 1995,2000 Oracle Corporation. All Rights Reserved. Legal Notices and Terms of Use.

Installing 9iAS

Pls anyone can Shed light on this.
The question i am going to ask is very stupid but i am confused
that's why i am asking it.
I have ORACLE 9i AS and OS is WINDOWS 2000 PROFESSIONAL.I wantt to load the 9i . Is it necessary to have any database first on my PC. I already have a database on 8i. Is 8i compatiable with 9i. If i load 9i without having a database will 9iAS will create any database on it's own when installing 9iAS. Pls ..... tell me in detail

I know most of your stuff from 8i will work on 9i with out any changes, but not the other way around. if you want to know the compatible level you must go to metalink.
9ias has its own database so you do not need to have any database for 9ias.
But you are not allowed use this for your production database. this db is dedicated for
9ias instance .

Installing 9iAS 1.0.2.2 on 9i database

Installing 9iAS 1.0.2.2 on 9i database and getting an
error: "ORA-04031: unable to allocate 40972 bytes of shared
memory ("large pool","unknown object","koh-kghu sessi","pl/sql
Errors encountered in the Install process. Installation Aborted."
Error occured on 49% of installation process! Anyone have any
ideas?
Thanks,
Janez

Dear Janez,
I understand the disappointment you are going through right now,
because I my self went through the same feeling of frustration
for a long time before I could successfully install Oracle9iAS
1.0.2.2 in conjunction with an Oracle9i 9.0.1 database (on the
Windows platform).
First of all, for some reason (???) Oracle no longer allows any
user to connect as SYS without the "as SYSDBA" clause. The OPCA
wizard requests the SYS password and connect string for the
database where it has to create the Portal Repository. I believe
that the "opca.jar" has the login credentials hard-coded
as "SYS" (without the "as SYSDBA" clause). To work around this,
set the parameter O7_DICTIONARY_ACCESSIBILITY=TRUE in the
database INIT.ORA file.
The next problem I faced was with the Oracle JDBC driver that
was supplied along with the Oracle9i database (release 9.0.1). I
found that I was not being able to establish a simple connection
using the classes111.zip or classes12.zip provided with the
Oracle9i database itself. I then visited the Oracle Technology
Network to search for Oracle9i JDBC drivers and downloaded the
classes12.zip file listed for the Solaris platform (there were
no JDBC drivers listed for the Oracle9i database on Windows
NT/2000, only Oracle8i release 8.1.7).
Then I ran the Portal Configuration Assistant batch file
(launch.bat) after replacing the existing classes111.zip in the
script's CLASSPATH with the classes12.zip I had just downloaded.
Now I was getting the same error message that you have listed.
I then attempted to create the Portal 3.0.9 repository manually
instead of using the Configuration Wizard and was finally able
to do so. I am outlining the steps below that you have to follow
to do the same.
1. With a text editor, open the following file:
<ORACLE_HOME>\portal30\admin\plsql\cat\catload.sql
2. Comment out the following line:
REM spool ..\..\portal30\admin\plsql\cat\catldscr.sql
3. Add a new line to indicate the correct location of
catldscr.sql for a manual installation:
spool catldscr.sql
4. Save and close the file.
5. With a text editor, open the following file:
<ORACLE_HOME>\portal30\admin\plsql\owa\owaload.sql
6. Comment out the following line:
REM spool ..\..\portal30\admin\plsql\owa\wpildscr.sql
7. Add a new line to indicate the correct location of
wpildscr.sql for a manual installation:
spool wpildscr.sql
8. Save and close the file.
9. Open a Command Prompt and set the ORACLE_HOME like:
set ORACLE_HOME=E:\Oracle\iSuites
10. From the %ORACLE_HOME%\portal30\admin\plsql
directory, run the onetime script to install the PL/SQL Web
Toolkit packages:
onetime.cmd -p <SYS_Password> -l onetime.log -c <connect_string>
11. Then run the Oracle9iAS Portal installation script from the
Command Prompt (%ORACLE_HOME%\portal30\admin\plsql\winstall) to
install the Oracle9iAS Portal product. This may take about 2 to
3 hours.
winstall.cmd -s portal30 -p portal30 -u users -t temp -d users -
l users -o portal30_sso -i portal30_sso_ps -r 12345 -c
<connect_string> > winstall.log
12. At a DOS prompt, run the %ORACLE_HOME%\portal30
\admin\plsql\ssodatan script. This script configures your login
via the Single Sign-On (SSO) Server.
ssodatan.cmd -w http://<Machine_Name>:<Port_No.>/pls/portal30/ -
l http://<Machine_Name>:<Port_No.>/pls/portal30_sso/ -s
portal30 –p portal30 -o portal30_sso -d portal30_sso -e
portal30_sso_ps -c <connect_string>
13. Stop and restart your HTTP server:
net stop OracleiSuitesHTTPServer
net start OracleiSuitesHTTPServer
14. In the DOS prompt, run the following two commands to install
the Portal Online Help.
cd %ORACLE_HOME%\portal30\admin\plsql\wwu
contimp.cmd -s portal30 -p portal30 -o portal_help -m reuse –u
database_user -d ..\..\..\doc\site\hlp30ca.dmp -c
<connect_string>
Hope this helps.
Sudip.

Installing 9iAS 1.0.2.2.2 with 9iDB9.0.1.1?

Similar Messages

Maybe you are looking for