Installing 9ias step by step and/or workarounds needed!

Hi:
Is there any document (technet or metalink) explaining step by step instructions and/or workarounds needed to install 9iAS infrastructure and complete ias (forms, reports, portal, wireless) on same machine (WINDOWS 2000)?
I've installed it on one machine but my REPORTS server do not work and i don't know anything else to do to put it working (the reports server startup and after that shutdowns immediatly without any warning).
Is there any issue found after releasing 9iAS for Windows 2000?
Would appreciate any help.

This will definitely be my endgame.
But since this code just came out, I am not willing to jump direct to it, yet.
Also, I haven't found much documentation on how to make this transition, i.e., exactly what settings on the ASA will make it replace the IPN, and if any changes need to be made on the Admin/Policy/MnT server.
Then as soon as I make that transition, I will be able to rebuild the 3315 (have 2) to be failover between the two locations.

Similar Messages

I had a 'dead' iMac repaired and it needed a new HDD & graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I've no idea what this will be. Help please.

I had a 'dead' iMac repaired and it needed a new HDD and graphics card, the repairer installed OSX 10.6.8 and i now need to install other software but I am being asked for 'User' password so I may do this, I have no idea what this will be. can anybody help please?
<Personal Information Edited by Host>

On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
I don't know what to make of this.
Peter R

How do i install windows on the Imac and do i need a seperate disk to install it

I am having trouble installing windows on my imac i really need someone to help me because i have certain downoas and things i need to install in order to go through college please help me!

Welcome to Apple Support Communities
1. Open Boot Camp Assistant and download the drivers
2. Create the partition and insert the Windows disc
3. Your computer will restart into the Windows DVD. Erase BOOTCAMP when it asks for a volume
4. When the install ends, install the drivers
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

9iAS 1.0.2 and Discoverer 3i with NAT IP translation

We just installed 9iAS 1.0.2 and Discoverer 3i on an NT box. We also use NAT IP Translation at our agency. Everything works fine if we're connecting to the Discoverer server using the local IP, but if we're outside the network, we have to connect using the NAT IP and it fails when trying to get to the User panel.
I was told to upgrade to 9iAS 1.0.2.1. I was wondering if this will resolve the NAT IP translation.
Any help will be appreciated. Thanks.

You're probably not going to be able to use Discoverer 3i as an "extranet" solution. This is due, in part, to Discover 3i's use of the IIOP protocol, which isn't optimized for routing of packets outside of the subnet that your Discover box is located. Under the IIOP connections that Discover 3i employs two (I think) disticnt ports are used (can't rememeber what they are off the top of my head) and then as the session continues, random port connections are established. These random port connections are rarely ever the same and even more are opend for additional user connections. To see what I mean, open a cmd session and do a netstat to see what ports are open. As you use Discoverer 3i, keep doing a netstat...you'll see the ports open and then close as the session continues.
Oracle has since implemented "extranet" functionaltiy in Discover 4i. Other than Discover 4i, you're only other solution is to implement a Terminal (or Citrix server) on the same subnet as your Discover 3i box. you can then implement a "published application" with the client piece and setup appropiate firewall/NAT rules to allow users on other subnets to use the application. If you would like more detailed information, send me an e-mail and I will dig up the research I have already performed concerning this situation.
Thanks,
Mike

Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help.

Extend the EPM install to a new EOI and remove the old EOI's (server decommissioning). EPM version 11.1.2.1 and having essbase and planning; I understand removing EOI's is not as simple as 11.1.2.3 but any suggestion/steps would be of great help....

Next time try to create a topic that is not the question.
There was no option to remove epm instances in 11.1.2.1, basically the cloest you get is uninstalling the products on the server and hope that some of the info is removed from the epm registry
Cheers
John

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.

miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot

Unable to install Photoshop Elements 12 due to error with shared technologies. I have tried all troubleshooting steps and am no where. Install logs do not have anything that stands out. Any ideas?

I have tried all troubleshooting steps and am not getting anywhere. Any Ideas?

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

I'm trying to unlock an Iphone 4. The celular company allready unlocked it. and send me an E Mail with the instructions to do it myself. I have done every step, and in itunes apears that my Iphone is Unlocked. But I can not use a sim CArd from another Co

Im tying to unlock an Iphone 4.
the celular company make it by its system, and send me an E mail with the instructions to finsh the process by myself, throug itunes.
I did every step, and at the end appers a message telling that my Iphone is unlocked.
but it does not work with other celular company sim card.
It only works with the original sim Card company.
In the Iphone appears a message teeling that has no service with another company's sim CArd.
I don't know what to do.
I've been doing this, with different Sim cards.
sometimes appears a message informing that the SIM card is locked with a PIN. That i must instal the last itunes version and connect it again.
but every Sim card I have are with PIN.
If you can help me I;ll be very glad.
Thank you very Much.
nicanorfrommon

Chrisj4203, thank you for your kind answer.
I have done a lot of restores to the Iphone, and resets also.
I;ve done holding both buttons as you sugested, but there is no signal appearing.
I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
I don;t knoe what todo.
I have been trying for more than one mont.
I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

TS1538 I have gone through all troubleshooting steps and can't find a solution. My iPhone is no longer showing up in iTunes. Can anyone help?

I have gone through all of the troubleshooting steps and still do not see my iPhone 4 (6.1.3) when I connect with USB to iTunes. Can anyone help?

I'd try removing and then re-installing iTunes. An uninstall will not remove your music etc. That should re-install the usb drivers etc. I don't think you can separately delete and install the drivers.

Canot install 1-Step RoboPDF printer: 1930

I am trying to install RoboPDF from the RoboHelp X5 CD and I
get the error message of: Canot install 1-Step RoboPDF printer:
1930. I have done the uninstall and reinstall but to no avail. The
computer is running Win XP OS. Anyone have any clues?

Welcome to the forum.
I don't recognise the problem but 1 Step was not without
issues. Contact me offline via my site.

Cannot install 1-Step RoboPDF NT-Driver: 126

When trying to install RoboPDF 1-Step from the Trial.exe
(RoboHelp) I'm getting an error during the installation.
Like the subject says: Cannot install 1-Step RoboPDF
NT-Driver: 126
This is persistent. I uninstalled all of Robohelp and RoboPDF
several times.
My system is Windows XP SP2 with all patches.
I'm clueless. I removed all traces of 1-Step-RoboPDF in the
registry already to no avail.

Welcome to the forum.
How's your German?
Click
here.
The only answer I can find is in German but hopefully someone
can help you with that. Also Dirk Bock responded to that post on
the German forum but he also hangs around here so perhaps he will
see this and help you.
Do you have admin rights on the PC to which you are trying to
install? RH will install install without them but not work
properly. Perhaps 1 Step will not install without those rights.
Also, you have problems with the full version of 1 Step, then
Customer Support will most likely upgrade you to FlashPaper which
includes a PDF function.

TS1538 After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any a

After updating my iTunes it no longer acknowledges that my iPod or iPhone is connected so I can't update my music.. I have followed all of these steps and everything is working fine but this new version of iTunes isn't recognizing my devices. Any advice?

I have the same problem. Running Win 8 64Bit, updated to latest ITunes and now will not recognize phone or pad. Followed all advice from Apple (uninstall/restart/re-install, all in exact order) ... nothing. Spoke with Apple tech and walked through the whole process, but no resolution. Tech was trying to be helpful but has no way of addressing issue.

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

I have photoshop elements 10 and when I put the 1st disc in it will not load it just launches. I have gone through the step and troubleshooting in the manual but no dices please help.

Hi,
You can download Photoshop Elements 10 from the link below and Install with the serial number,
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Thank you

Upgrading from 10.4.11 to 10.7. What are the steps and do I also need to pay for 10.5 and 10.6 along the way?

Hi. I wannt to upgrade from 10.4.11 to 10.7.
What are the steps and do I also need to pay for 10.5 and 10.6 along the way?
According to the 10.7 lion page on 'store' it says that you need 10.6 to use it does this mean I'm going to have to do 3 upgrades?
Thanks

Why do yoy want Lion/10.7???
Anyway, if your Mac meets the requirements you can skip 10.5.x, and even 10.6.x if you can afford to erase all your data.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory[14]
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading[14]
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/
What applications are not compatible with Mac OS X 10.7 "Lion"?
http://ow.ly/5Iz09
http://roaringapps.com/apps:table

TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Installing 9ias step by step and/or workarounds needed!

Similar Messages

Maybe you are looking for