Installing A New Hard Drive - Creating A Carbon Copy
Hello and thanks in advance for any help you might be able to give me.
I have a white Intel Macbook 2.1GHz that I purchased in October 2008. I'm about to upgrade it by fitting some RAM and fitting a new hard drive. I have a drive dock for the new 2.5 inch drive that I can connect via USB.
Can anyone recommend the best method of transfering the contents of the old drive and creating a carbon copy of the original, so that when I install the new one, it runs just as before?
Thanks again,
Jonathan.
I recommend SuperDuper because it's easy and it works.
There is also Carbon Copy Cloner but I've never used it.
As far as a method, I use these steps:
1. Put the new drive in the enclosre.
2. Attach the new drive to your MacBook and format it using Disk Utility.
3. Clone your old drive to the new one.
4. Test the new drive by booting your MacBook from it.
5. Switch the drives.
-GDF
Similar Messages
-
I recently installed a new hard drive in a MacBook 2007 and then 10.6.3. I'd like to be able to Sync iCal to the calendars I have created on other devices (new iCloud account and an ME account). I can't upgrade to 10.7 or 10.8 because the MacBook is 32 bit. Just looking for a workaround as this is not a primary device.
You should update to the latest version of Snow Leopard, 10.6.8 - you can download it here; however it's still not compatible with iCloud and though you can connect to access your email you cannot access any other of iCloud's facilities.
However some people have been able to set up calendar syncing by using the method detailed here - this is an unsupported hack and may not be reliable, and may stop working at some future point. I've not tried it: use at your own discretion.
To access the email:
Entering iCloud email settings manually in Snow Leopard or Leopard
Are you sure you can't upgrade to Lion? It requires an Intel Core 2 Duo processor, which you may well have, though it also needs 2GB RAM so you might need to add additional RAM (might not be worth it for what you want). The published specs don't mention 32 or 64 bit. You can buy Lion by ringing the Apple Store at the number at bottom left of this page. -
Installing a new hard drive (hard disk)
Hi. I'm planning to install a new hard drive to my computer. Does anyone know how to install a new HD? Or does anyone know a link or anything? I also need to know if I should back up my original hard drive
Thanks,
Frisbo
G4 Processor Dual 867 MHz Mac OS X (10.4.5) EPSON R300 Photo PrinterHi, Frisbo -
Sorry - meant to address the backing-up issue in my previous post.
In the grand scheme of things working as intended, there should be no reason to have to back up your existing drive before adding a second drive - other than a hardware disaster or a formatting error (picking the wrong drive to initialize), there is little chance the data on the exisiting drive would be affected.
The operative phrase is 'working as intended'. That is why good practice includes maintaining a reasonably current backup of the important (can't afford to lose 'em) files on a drive at all times - things do happen, sometimes bad things or even catastrophies, without warning.
Backing up files was easier in OS 9 and earlier than it is with OSX, although backing up data files is still relatively easy - it is backing up the OS that has become less easy.
Unlike with OS 9, OSX can not be backed up via a Finder copy process (drag-copy). It is necessary to use a utility such as Carbon Copy Cloner in order to clone OSX to another volume in order to create a backup of it. I believe it can also be used to back up the entire drive. -
Greetings everyone
as the title says, ive had to install a new hard drive and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating 8500 music files individually!
Thankyou for taking the time to read my post, any help will be greatly appreciated.Ah, my reply was based on the assumption that you had a default installation of iTunes.
i.e you had all your music in the iTunes media folder inside your iTunes folder.
If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
This complicates you situation considerably.
iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
Step 1
Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
Now open the copy of iTunes Library.xml with WordPad.
Look for lines starting:
Location
These contain the paths to tracks.
You will need to use a find/replace to change the drive letter so that it is correct.
Make sure that you include enough in the "find" so that you only change the right thing.
Maybe /c:/ and replace with /d:/ or whatever.
After that, tell iTunes to use the library on the old drive with a shift key start.
Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
Then use the method in the following article to rebuild your library;
http://support.apple.com/kb/HT1451
Unfortunately the date added will be today for all tracks.
If iTunes works correctly after this, consolidate your library
File>>Library>>Organize>>consolidate
This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
Check that iTunes works OK and then use the first method.
Message was edited by: polydorus -
I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
-SteveBooting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard. -
I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.
Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck -
I'm trying to install a new hard drive on my Touchsmart but the recovery disks won't boot.
The Touchsmart 300-1120 is only 1.5 years old and it's hard drive is already fried. I bought a new hard drive, ordered the recovery disks, and it still won't boot. I've changed the boot order to go from the CD drive first, but all it does is click and then give the same error message it gave when the fired hard drive was in. I checked the diagnostic, and it can see the new hard drive...it just won't boot.
Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck -
Installing a new hard drive--can I use target drive?
I'm about to put a new hard drive in my Pismo, and I'd like to do it this way:
a) back up my current hard drive to a G5 iMac using Ethernet and Carbon Copy Cloner
b) install the new hard drive in the Pismo
c) move the old data back to the new drive by setting the new drive as a "target" drive and using CCC to transfer the data back via Ethernet.
Am I missing anything? And in step C, will I have to/can I format the new drive using the iMac and Ethernet?
Any suggestions and/or cautions would be appreciated.
Pismo 500 MHz, 1 GB RAM, 40 GB Mac OS X (10.3.9)You need to use a FireWire cable and FireWire Target Disk mode to do what you describe. Mac OS X cannot be installed over an Ethernet connection unless one of the two machines is running Mac OS X Server or there is a Mac OS X installation on the target computer in addition to the one you will be cloning. The cloning operation will not erase the destination drive, so it may need to be reformatted first; a Mac OS X installation can only exist on a disk which is formatted as Mac OS Extended or UNIX filesystem, and UFS should only be used if you have a specific reason to do so.
(20387) -
Potential Driver Issues with OS Install on New Hard Drive?
I want to upgrade my laptop's hardrive, but my laptop did not come with recovery discs. I did purchase a full copy of Windows 7 Professional, but I have been saving it...for when all else fails, I suppose. Whether I am able to reinstall Win 7 Home or whether I have to install Win 7 Pro, how can I be sure to reinstall all the necessary HP drivers (e.g. trackpad, cool sense, beats audio, etc.) for my machine? Is it best to download the drivers prior to installing the new hard drive and have them ready on a flash drive; or is there an easier method? Thanks.
This question was solved.
View Solution.Yes that is a very good question.
It's very much advised you do a HDD error check, hard drive test from BIOS and SFC scan lastly.
You can then undergo a disk cleanup and disk defragmentation of the HDD & then proceed with backing up or cloning tools.
I do back up regularly into my 2TB external drive using Macrium reflect, AOMEI back upper and also have all my latest drivers downloaded and copied to another USB along with another bootable USB with Windows OS ISO.
Note: I've already created my recovery media after I setup the laptop first time for additional safety.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
How do i install a new hard drive using time machine
Hi there
I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
ThanksYou haven't inserted your new hard drive yet?.
There's two ways
1. install yourself
2. or pay someone to install it for you.
If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
Its very easy.
1. remove all screws and the lid.
2. remove screws from the black bracket which is holding your hard drive in place.
3. unplug your hard drive.
4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
5. insert these external screws to your new hard drive (there are four screws)
6. insert and plug your new hard drive.
7. screw the black bracket in firmly
8. attach lid and insert all screws firmly. -
Where can I buy a larger hard drive for my late 2008, 15" macbook pro? From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended. But how/where?
Welcome to Apple Support Communities
You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance -
I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
my 5th generation ipod won't sync anymore to my PowerMac G4. It worked fine, but when I installed a new hard drive it won't work anymore. I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod. The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.
Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder. If that doesn't help, try a low level reformat of the drive using the same application. Make sure you choose Mac OS X Extended (Journaled) as the file system format.
B-rock -
What do I need to do after installing a new hard drive?
I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.
https://discussions.apple.com/thread/5210788?tstart=0
At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks. -
I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.
https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
Your old Profile is located here in Win XP and W2K: <br />
''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''
Maybe you are looking for
-
i downloaded the Mavs about 2 days ago. it restarted automatically as it stated... i have not really used it again until tonight. and boy was i so ******! after downloading the new OS update, the list below stopped and wont work properly: Contacts iP
-
IPod 160Gb works with Macintosh, but not with Windows
Hi, My much treasured 160Gb iPod crashed and since then, I can restore it on a Macintosh machine and add music, etc. HOWEVER, as soon as I try it in a Windows PC it tells me I need to re-format it for Windows (expected) goes through the process OK, r
-
Downloading CSI episode, getting disk is full error
i also need help i am trying to download a CSI episode but all it says is:there was a problem......the disk you are attempting to use is full......remove files and clean out recycle bin.....for additional space.I need help!!!
-
I got an issue after upgrade. When I click on external identity sources, then on AD .. the page will freeze and keeps with a message "Loading page..." and never finishes
-
How to separate XML element content
Hi All, How can i separate XML element content in to two strings, where each string will be copied into new variables. For ex: The input I get is <XmLElement>C:/documents/sharedFiles/apple.pdf</XMLElement> now I want to break the content into two par