Installing a new hard drive on a clamshell

I'm thinking about installing a new hard drive on my clamshell, at least a 40gb. I've researched online and it's a little bit overwhelming seeing all the steps required to take one of these apart and put the new hard drive in. Can anyone out there tell me if it's worth it to put the new one in? Is it something that requires a lot of skill? I basically want to know how hard it is to do this.
Also, I was wondering if there was anywhere I could send it to install the hard drive for me. And if so, how much it might cost. Thanks.
-Aaron

The hardware limitation is 128GB to be correct.
The amount of space you can really use when the drive is partioned is about 111GB for a 120GB HD.
If a 160GB hard drive is installed, the Clamshell will only use 128GB, the rest remains unused. If you want to use the full capacity, only a workaround helps.
Place the hard drive in an external enclosure, connect it to a newer G4 Mac and partition it via disc utility. Your partitions can be up to 127.99 GB max. The second partition of a so-called 160GB hard disk (you will never get what you see) would add up to 21 GB.
Then put the drive in your clamshell and install your favorite operating system (Jaguar, Panther or Tiger) The speed tools ATA Hi-Capacity driver for 24.95 $
http://www.speedtools2.com/ATA6.html
is a DMG and the second partion will be accessible in a minute. The drawback: There are some limitations in using OS9 (only Classic mode possible) and harddisc tools.
I have installed a 160GB HD in a Clamshell which i use as a music box, so every GB matters.
You can buy 250GB HDs, but i havn't tried that by now.

Similar Messages

  • I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

    Greetings everyone
    as the title says, ive had to install a new hard drive  and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
    The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating  8500 music files individually!
    Thankyou for taking the time to read my post, any help will be greatly appreciated.

    Ah, my reply was based on the assumption that you had a default installation of iTunes.
    i.e you had all your music in the iTunes media folder inside your iTunes folder.
    If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
    This complicates you situation considerably.
    iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
    Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
    Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
    Step 1
    Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
    Now open the copy of iTunes Library.xml with WordPad.
    Look for lines starting:
    Location
    These contain the paths to tracks.
    You will need to use a find/replace to change the drive letter so that it is correct.
    Make sure that you include enough in the "find" so that you only change the right thing.
    Maybe /c:/ and replace with /d:/ or whatever.
    After that, tell iTunes to use the library on the old drive with a shift key start.
    Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
    Then use the method in the following article to rebuild your library;
    http://support.apple.com/kb/HT1451
    Unfortunately the date added will be today for all tracks.
    If iTunes works correctly after this, consolidate your library
    File>>Library>>Organize>>consolidate
    This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
    Check that iTunes works OK and then use the first method.
    Message was edited by: polydorus

  • How do i install a new hard drive using time machine

    Hi there
    I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
    Thanks

    You haven't inserted your new hard drive yet?.
    There's two ways
    1. install yourself
    2. or pay someone to install it for you.
    If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
    Its very easy.
    1. remove all screws and the lid.
    2. remove screws from the black bracket which is holding your hard drive in place.
    3. unplug your hard drive.
    4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
    5. insert these external screws to your new hard drive (there are four screws)
    6. insert and plug your new hard drive.
    7. screw the black bracket in firmly
    8. attach lid and insert all screws firmly.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

  • I had to install a new hard drive on my computer, when I downloaded itunes back onto my computer, none of my songs were there. how do i get them back??

    I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • HT1338 my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.

    my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.  I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod.  The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.

    Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder.  If that doesn't help, try a low level reformat of the drive using the same application.  Make sure you choose Mac OS X Extended (Journaled) as the file system format.
    B-rock

  • What do I need to do after installing a new hard drive?

    I had a 13" Non-retina MacBook Pro from mid-2012 and I bought it standard, but I upgraded my RAM from 4GB to 8GB, but also while on this website that I bought the RAM modules from, I noticed they sell Solid State Drives and I would have gotten one, but I wanted to upgrade it later on as I didn't have $500 for the 512GB flash drive for it. I need something with storage and 500GB is plenty, but I found a 960GB SSD for $500 on this website. Its a very good website for upgrades for all computers. So my question is, when I install this new hard drive, can I just hold Command+ R to install Mac OS X or do I need to go through a special process to get OS X on the new hard drive? I have an Apple Time Capsule so I have my data backed up and I'll just restore it from a backup. If I need a special cable to boot OS X to the new drive, then so be it.

    https://discussions.apple.com/thread/5210788?tstart=0
    At startup hold down the Command+Option/Alt+r keys until you see a globe on the screen. Then use disk utility to partition and format the drive HSF+ and then select Reinstall Mac OS X. whatever version of OS X that originally came on your system will be installed and then you can upgrade back to Mavericks.

  • I tried to install a new hard drive using Snow Leopard to back up with Time Machine. When I installed the new HD I installed Leopard (10.5) on it and tried to use time machine to restore the backup I had made using 10.6. Kernel panic screen occurred.

    I backed up my system using 10.6 Snow Leopard's Time Machine to an external hard drive. I did this because I purchased a new internal hard drive to upgrade my 2007 White Macbook from 80GB to 320GB. When I installed the new hard drive, I installed 10.4 (Tiger) and then 10.5 (Leopard) and once Leopard was in I tried to use Time Machine to restore my backup from 10.6 (Snow Leopard) and received a kernal panic screen directly after the bootup.
    The screen had code asking for 10.6, so does this mean that the computer is searching for Snow Leopard? If so, how can I do this? Will a bootable drive with Snow Leopard on it be able to solve the issue or will I somehow need to find a way to wipe out this new hard drive?
    -Steve

    Booting From Snow Leopard Installer Disc
    1. Insert Snow Leopard Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    Drive Preparation and Installation
    1. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

  • My laptop harddrive crashed. I have installed a new hard drive. I want to retreive all Firefox bookmarks and History. Is it possible? I use windows XP

    I use a Windows XP Laptop and Firefox browser ( free don't remember the version). My hard drive crashed today 31.07.2011 and I installed a new hard drive with installed Windows XP. I have just downloaded Firefox 5.0.1 ( free version) and would like to retrieve all by previous bookmarks and HISTORY.

    https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Win XP and W2K: <br />
    ''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

  • HT201250 My macbook pro crashed and I had to install a new hard drive. I restored from Time Machine backup all the files from my old hard drive onto my new one.

    Does it really back up the whole new drive or does it only back up what's been added? It seemed like it was doing the whole thing when I tried it. I stopped it. Don't want to use up all the space on my external. Is there something else I need to do or did I mess up by not doing the migrating thing? thanks!

    If you installed a new hard drive, it has nothing on it and yes TimeMachine is going to take forever to restore everything back.
    I guess you'll have to erase and start over again now.
    Too bad, you should have made bootable clones in addition to TimeMachine, they can restore in a hour or two depending upon content, they are also option key bootable.
    TimeMachine has to go through and calculate all the files it needs to bring forward, the files are strewn all over the drive. The read heads are moving all over the platters all the time from fast sectors to slow ones, not matching what's occuring on the internal drive.
    With a clone the files are defragmented and optimized, the drive reads one file, moves the heads a tiny bit and reads the next all the while transferring exactly to the internal drive, they are more in step with one another, thus it's much faster restoring from a clone than TM.
    Most commonly used backup methods

  • I sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

    i sent my 17inch mac pro to apple to install a new hard drive and my mountain lion was not on it when i got it back, using the same apple id i tried to re download it but it says i have to pay

    never mind i got it by going into my account and veiwing hidden items and there it was

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer.  Can I use instillation discs from a 2009 or 2010 MacBook?

    I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer.  Can I use instillation discs from a 2009 or 2010 MacBook?  The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.

    Sometimes they do work - i've done it before.  I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
    Why not just clone your hard drive?  It'll save you a lot of time doing a clone rather than doing a clean install.
    Unless you're having issues with your old set up or  your old hard drive is dead.
    You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
    Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
    Good luck

  • Installing a new hard drive  and want to re-install Photoshop

    I need to install a new hard drive and want to re-install Photoshop. Since I will installing  a new OS, when I deactivate Photoshop from the old hard drive, should I permanently deactivate or suspend activation?

    Help > Deactivate

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

Maybe you are looking for

  • My external hard drive not showing up

    Hello, My external hard drive is not showing up on my desktop. I went to finder & preferences>general and made sure I checked "show these items" and checked hard drives. I even unchecked it because I have 2 other external hard drives. When I checked

  • Ipad using wrong number for imessage

    After upgrade, AT&T ipad selected telephone number from our Verizon iphone for imessages, this number is not associated with our Apple account, I've checked.  How do I change it?

  • Copy of sent emails is sent to blackberry

    I have a pearl.  Company uses Lotus notes and an enterprise server.  When I send an email from Lotus notes on my PC a copy of that email is sent to my BB.  How can I stop this.

  • Duplicate Time Machine Backups

    I went about 3 weeks without connecting my MBP to my Time Machine drive. Last night when I did it it wasn't seeming to update so I clicked on the "Backup Now" button and went to bed. I woke up this morning to find that Time Machine had created a seco

  • Help with 3D pie chart

    I tried to create 3D Pie Chart using the code below but it come back with no chart data available. I tested the select statement in sqlplus, it works. Is there something wrong with my select statement?? SELECT NULL LINK, 'Saturday' LABEL, DECODE(SUM(