Installing a new version of Windows 7
Hi.
I made a mistake when I bought a HP touchsmart with Vista installed with an option of a windows 7 upgrade. Now, whenever I need to do a recovery, I have to reinstall Vista first with all of its updates before I can reinstall Windows 7. Its a 3 hour nightmare process.
My question is this.
If I buy a full version of Windows 7 and install it, will I lose my touchscreen capabilty?????
Anyone have an answer???
Don
Hi
You will not loose your touchscreen capability.
Similar Messages
-
How do I retrieve contacts in windows.old folder after I installed a new version of windows?
how do I retrieve contacts in windows.old folder after I installed a new version of windows?
Skydiver119 wrote:
My situation may be different from yours since all mu music is ripped from cd's not bought from iTunes, but I would think the premise is the same.
Doesn't matter what is in your library.
When I moved computers I literally dragged and dropped the music where I wanted it to be. THen when I opened iTunes I imported the files back into iTUnes
This creates a new library with all the same items but you lose a lot of info: Ratings, comments, date added, custom EQ, playlists, etc.
If you simply copy the entire /Music/iTunes/ folder, it is the exact same library, not a new library. No info is lost. -
[HELP] Can I install a new version of Windows 7 on my Lenovo G550?? (+ One Key Rescue???????)
I bought a Lenovo G550 with 4GB DDR3, T4300, 320Gb. It came with Windows 7 BASIC installed and I'd like to install a version of Windows 7 Professional I have here. I want to do a clean install!
Well, when I started the installation, the disks were partitioned as follows:
1. 200 Mb - System;
2. 233 GB - Hard c: \ (where I believe that Windows 7 Basic is installed)
3. 30.2 GB - Lenovo (here are the drivers, totaling 800MB used!)
4. LENOVO_PART - 14.8GB [OEM] (is a hidden partition! Probably the One Key Rescue. He says CAN NOT INSTALL, OEM is because, for the MANUFACTURER)
The question is: if I delete the first 3 partitions, leaving only the hidden partition (Lenovo_PART-14.8Gb) and install Windows 7 Professional, will work?? If later I want to restore the system using the discs created by One Key Rescue, will work too? That will give an error?
PLEASE HELP! Windows 7 BASIC sucks!
(Thanks to google for the english translation)OK - I was under the impression that you had a brand new machine and did not have to restore any data stored already. If it were me - I would back up all of my data - not with True Image - but just back it up. Then I would do a clean install of Windows 7 (getting rid of all those partitions) and either create one or two. I just use one and then do regular images wtih Acronis True Image - but you could create two - one for the OS and applications and another for all your data directories.
I don't know how you would do a new install while trying to create the partitions exactly the way Lenovo has them when the machine is delivered. (I don't think Lenovo does either) So - I would make it simple and just get rid of them all after your data is backed up. If you have new applications loaded, I would just install them again. Not the most convenient but in the long run you will have an easier system to back up and manage.
I'm not a fan of Lenovo's instant restore proceedure, because A: it is complicatied, and B: it doesn't buy you anything if you crash your hard drive anyway. It is really only good if you A: do regular backups with the instant restore, and B: either have a virus or corrupt some data and need to use it. You can do the same thing by using the Microsoft system restore point proceedure. So - to me it is just a gimick and makes your drive a mess wtih hidden partitions, etc.
That would be my approach. I would NOT try to backup your current configuraton with Acronis before installing a new OS. It can be done - but I think it will be very messy. A much better approach would be just to delete all of those partitions with the Windows 7 install proceedure - then create just one or two new partitions as you install the new OS. Then start using Acronis to do regular images on your drive. You can also do incrementals so it only takes a couple of minutes each day.
Installing Windows 7 is a piece of cake as it finds all the drivers for you. Just make sure you have it connected to an ethernet cable. Then install your applications and then load your data back. Very straigtforward.
The advantages you will get will be: A: You will get use of your entire hard drive space. B: It will be much easier to manage and back up. C: Using Acronis to backup your drive will be simple D: If you ever lose data you can simply use Acronis to restore the directory or data file, or E: If you lose your entire hard drive you simply get a new one and then restore from the Acronis CD and point it to your last backup image.
I hope this helps. Good luck. -
What happens if i boot with windows an install a new version of windows on mac book pro ?
I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?majid khalili wrote:
I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
Give your previous partition layout, you cannot install Windows via Bootcamp, unless you are willing to give up all your extra partitions and go back to EFI, OS X and RecoveryHD only configuration.
i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
the main questions are :
1. does it recognize any of my partition to select for windows installation ?
2. if no , can i format any partition for new partition during windows installation?
3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?
1. Windows installer will not work and you will end up with driver issues.
2. No.
3. You cannot, but if you could, the Apple Bootmanager would be your Boot Manager/Loader. -
When I go to uninstall itunes or install the new version on Windows 7, it keeps telling me the file cannot be found and went through appdata folder and everything and cannot find how to correct this problem. Any suggestions?
That's perfect, thanks.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
I installed the new version of iTunes today. It's 12.1.1. After completing the installation, including restarting my computer, I was no longer able to use Windows Internet Explorer. Has anybody else experienced this? If so, how did you fix Explorer? I was using Explorer 11 and Windows 7, installed on an HP Pavilion g series
Never heard of that being caused by installing iTunes. Try asking on a Windows forum. This isn't a problem with iTunes or any other Apple product. If you believe it is, uninstall iTunes. If the problem persists, you'll have to seek advice on a Windows forum or contact Microsoft for support.
-
Today I think firefox automatically installed a new version and after that it said my adobe flash was old so I had to update that. Now I can't open links in a new window.
Firefox doesn't install new versions of plugins, but Flash may update itself automatically.<br />
You are still one version behind on Flash, current is Flash 10.1 r85<br />
If the Flash player didn't update properly then you need to download the full version and run the installer as Administrator (right-click: Run as ...)
Flash Global Notifications Settings Panel:<br />
*http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.html
You are more versions behind on Java updates with having Java 6 U11, current is 6 U22.
*Java Plug-in 1.6.0_11 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE) -
I have tried to just install the new version of itunes from the apple website, it looks like it downloads but after 5 minutes at the end of the install it says 'old version of itunes cannot be uninstalled, please contact support.'?
Is there anyway I can remove the version of itunes from my computer? i dont mind if i lose the music/content I already have on my itunes. I need to do this as i have just received the iphone 4 and need to install the newest version of itunes.
Many thanksI need to uninstall my old version on itunes and install a new version, i cant uninstall from Programs and Features, a message keeps coming up saying 'The feature you are trying to use is on a network resource that is unavailable.'
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
Dear everyone
I need to configure Acrobat to display PDF files in Safari, but I have a lot of troubles to do it.
I read a european commission document explaining that
http://ec.europa.eu/research/participants/data/support/sep_usermanual.pdf
If Safari does not display pdf forms in the browser window, uninstall all older versions of Adobe Reader and download the most recent one. First close Safari and then install Reader. Launch Safari and you ought to be able to open the pdf files inside the Safari window. If you install Adobe Reader 10.1.x without first closing Safari, Safari will not display the pdf file inside its browser window until it is re-launched. For further help, please see http://helpx.adobe.com/acrobat/kb/troubleshoot-safari-plug-acrobat-x.html
I have OX S yosemite, I unistalled adobe acrobat, I closed safary and I installed the new version of adobe acrobat
but when I open a web page that I need to allow me to display and modify PDF files it is not working.
I checked the following web page
Troubleshoot Safari plug-in | Acrobat X, Reader X
that is recommending the following:
The AdobePDFViewer plug-in is used to display PDF files in Safari using Acrobat and Reader.
This plug-in is installed as part of the Acrobat X or Reader X installation. The location of this plug-in is:
/Library/Internet Plug-ins/AdobePDFViewer.plugin
but after the new installation with this folder is completely empty and I am still
unable to open these pdf.
Does anybody knows anything else I can do?
Best regards
RamonMoving this discussion to the Adobe Reader forum.
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
This is the best method to install a new version of Studio!
Do it cleanly. By this I mean create a new fresh startup disk for the install of Studio. Whether for Studio 1 ,2 or 3, trust me. this method will get you to a really stable FCS system.
1. Backup everything you want to keep if you're using the same drive you've been using as your startup disk. Clone it if you'd like to save time digging around for the files you want to keep. Or buy a new drive for your tower and use it as a startup disk, keeping the earlier one until you've transferred all you need from it. (I have no less than 3 startup disks for my single tower here) One is a 250 gig drive, the other two reside on their own partitions of a second physical drive. I use one system for beta testing, reinstalling the OS each beta test, and one "working" system for daily real work environments, and yet another "backup" system which is there just in case I need it. (but never really do actually).
2. Load your latest OS disk, and restart your computer from it holding down the c key during a boot up, or selecting it from the startup disk control panel in the apple system prefs.
3. Once your computer starts up from the OS disk, select "optional installs" from the button you'll see in the window. From there select "erase and install" and install will begin.
4. After the OS install, run Software update and go all the way with it. There's nada out there that's not OK to install.
5. Install Studio. If it's an upgrade version, no problem to not install the earlier version you're upgrading from. Just have it's serial number handy because FCS will ask for it as well as the upgrade serial number.
6. Run Software upgrade again to make sure all of your FCS apps are up to date. INSTALL EVERYTHING that Software Update proposes to install.
7. You'll be a very happy camper.. it will also feel like your whole computer is faster because of this clean install of the OS you did...
It's not impossible to get a fine upgrade done without doing it as I've described above, but with the latest round of problems being posted about a new install, I gotta say that this clean method will fix all the problems being posted here and elsewhere. Why even bother taking the risk? What I've posted above will be THE WAY to make sure you're system is running right.
I've espoused this method of install any time you upgrade your OS (i.e., Tiger to Leopard or the upcoming Leopard to Snow Leopard upgrades about ready to hit us all) OR any time you install a new version of FCS or even a FIRST install of the studio. It's not all that time consuming, and running pro level software really demands that the system install is totally clean.
I oversee about 75 FCS stations at the Colorado Film School, we do this clean install every semester (4 months) on the systems there, and really have incredibly stable setups. Never really having the problems that get reported all over the forums... not only that, they boot fast, run fast, and just work.
When software companies test new versions of their software in beta, it's always asked by all software manufacturers to install their beta over a clean fresh OS... always... so there's a lesson here to learn from them, and also a hint: nobody chooses the "upgrade" button for a new version of said software, rather they are testing over CLEAN installs only. Makes perfect sense then to install new versions of software as complicated as this is over a clean new OS install.
JerryI fully support Jerry's advice. Though it is a little like the old auto repair manual I once had. If you looked in the section under "clutch replacement", it started out like this ...
*Clutch Replacement procedure.*
• elevate car - be sure to use jack stands to support vehicle
• remove engine
• with clutch pressure plate exposed ....
Of course, they never spelled out all that was involved in the "remove engine" step. So, in the interest of adding more detail to Jerry's advice on the "erase and install" process for those who have not done it before and might be intimidated - read on.
• Make a list of all Applications to install. Which ones do you need? Go through your Applications and Utilities folder and note which ones you'll want to reinstall. Note the version.
(I don't know about you, but I had a shocking number of apps I downloaded, used for a few times and never used again. Forget installing these disused apps.)
• If you are upgrading from a PPC to an intel machine, you'll want to know if the apps are UB or PPC. Upgrading your PPC software to UB can be a significant cost in a PPC to intel conversion. Know what you are getting into - do a search before installation to see if there is a UB version available. You can find out whether an app is PPC or UB by looking in System Profiler>Software>Applications. This window will also tell you the current installed version number. Generate a .pdf file of it and have everything listed for your records.
• In the list, note whether is was a download or you have a disk. If it was a download, find the DMG or installer package and copy it to an external firewire drive. Put it in a folder titled - Apps to be installed - or something easily identifiable.
• If you need to go back to a previous version (e.g. QT 6.5.2) download the dmg file BEFORE you start the installation process.
• In the list, note if the application is a full install or an UPGRADE. If an upgrade, make sure you have the previous version's disks (as well as the serial numbers - see below).
If the UPGRADE version does not require the previous version to be present - eg when installing the upgrade version of FCP 7, DO NOT install earlier software. All you'll need is the previous serial number. The way to figure this out is to try to install the newest version. If it needs the previous version present before proceeding, the install process will tell you that.
Some upgrades will require that a version of the previous app is on the disk. If this is the case, when you install the first version, simply install the minimum so the app will be on the hard drive. You will need to do this because there will be NOTHING on the disk after you do your clean erase.
• Referencing your list, find ALL your disks before you start. This includes previous versions if you are unsure whether they will be needed.
• Spend some time looking through this forum for Professional Application installation issues. The classic example is a conflict between Logic and FCP. Install FCP first and you'll have no issues.
• Sort your list into an installation sequence. Lay out your disks in that order.
• Referencing the list, make sure you have ALL your serial numbers including those you've downloaded. I've purchased a number of programs on line and the only documentation of the serial number was an email. All those are kept in a dedicated folder in Mac Mail. For serial numbers that arrived via electronic means, use cut and paste instead of re-typing whenever possible. This will prevent errors in transcription.
In making the list, TEXT EDIT works ok, (I use Excel). Text edit has the benefit of being easily readable on any mac. Print the list out for reference, put a copy on a flash drive or a firewire drive where you can access it to cut and past serial numbers during the installation process.
• Recognize this is going to take some time. Ranting, drinking too much coffee, swearing, sitting in front of the computer watching the progress bar, etc will not make things go faster. All it will to is put you in a really bad frame of mind. Do it over a weekend when you can be multitasking. While you are cleaning off the mountains of paper on your desk or raking the yard, you can take regular breaks to check on progress.
Process -
• Download Carbon Copy Cloner or one of the other backup utilities and do a full backup of your existing system drive to an external firewire drive. Make the drive bootable. *Do not* cheap out on this as this is your insurance policy. If you forget something or can not find a serial number, you often can find it and copy it from the backup system to the newly installed version. Or, if things go horribly wrong, you can simply copy the old system back to your computer and pick up where you left off.
If you have a MacPro or G5 tower, an alternative to cloning your existing system disk is to pick up a new hard drive to use as the clean new system disk. Your existing system disk will be the clone.
• Once you have gathered and organized all the materials and backed up the drive or installed the new system drive ...
• Insert your OSX installation disk and boot the computer from the disk (Jerry explains how)
• Erase the hard drive. Use the ZEROs option as this will map out any bad sectors. This will take time. See the note above.
• Install the OS. If it is an upgrade install, see the note above regarding upgrade installs. Repair Permissions and then run the updates. Repair Permissions.
• Install your applications following your list. Make sure to Repair Permissions after each install and update..
Have fun, be prepared for a few minor glitches. If you multitask, you can get the garage/ or office cleaned out and your computer rebuilt. In all honesty, this process took all weekend plus time in the next week as I discovered apps that needed additional updates, configuration settings, etc. No doubt it would have been faster if I was sitting at the console the whole time, but I was able to get the office cleaned up and organized (which also makes ME much faster). Overall it was a very slick process.
When you have a fully functioning system again (you have tested all applications and everything works), CLONE the new system and put your info, your notes and the disks in a safe place - once you've done this once, why go through the pain of organizing this stuff again ...
Now, rejoice in a much faster machine with a lot more free disk space.
Cheers,
x -
I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Can't install a new version of iTunes
I upragded my iPod, but now I can't install a new version of iTunes. Always when I'm trying to install it, it says I should write somekind of iTunes.msi path. So what should I do?
And sorry about my bad englishmsi problems can usually be fixed with the Microsoft Installer Cleanup utility.
Unfortunately the Microsoft Installer Cleanup utility has been with drawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
Google msicuu2.exe download
mydigitallife in the above search has a copy of version 3
Check for malware before installing it.
After installing, To run the program – All Programs>>Windows Install
If you get permission denied error, Try Run as Administrator – an option if you right click on the program.
Use the Cleanup Utility to remove any instances of the problem program, i.e. iTunes.
Then try installing itunes. -
Cannot uninstall or install any newer versions of itunes
My laptop recently had to have the registry recovered. I'm sure this problem is related to the registry, but I don't know what key is preventing this from happening. Whenever I try to install any newer versions of itunes I get an error about the apple updater software cannot be uninstalled because the associated .msi can't be found. I even point to the .msi and it still fails. I have even tried to completely remove itunes and I get the same error. First of all, I don't understand why apple has designed the install files to remove previous versions when merely upgrading them would fix any problems like this. So, if anyone knows how to fix this, please help! I am now several versions behind and am getting errors adding music to my shopping cart because of it.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?
Maybe you are looking for
-
BP ID in HR - Hiring for an existing BP ID
Greetings, How could we hire an Employee using an existing BP ID that had been created thru a different system (CM or CRM)? Is there a BAdi that could be implemented to check for duplicate and allows us to use an existing BP ID? Thank you very much f
-
PR deletion - when PO deleted & RFQ not deleted
Dear Gurus, PR created, released and then RFQ created with reference to PR, RFQ Maintained, then PO created with respect to RFQ. Scenario 1: PR>>RFQ>>PO : Delete PR, the system not allowing u2013 Says RFQ exist u2013 100% correct Scenario 2: PR>>RFQ>
-
Activating capacity display in Planning table of MF50.
Hi Experts, I intend to use the MF50 for Planning my FG. My scenario is a normal PP PI and not REM. I am using production version to distinguish the work centre (defined as production place). I want to display the Capacity of the Workcentre on the MF
-
I am trying to get some combo boxes to have their entries populated by a text file. I've read many forum entries about the 'strings[]' property, it but it refuses to work for me. I want the combo box to be modifiable by changing entries in a text fil
-
how can I connect my iphone 4s to 3g in (globe telecom?