Installing Agent Configruation Assistant and get Error ora-02084

Hello
I am installing oracle 9i using oracle universal installer. Everything was going fine until installer tried to configure Oracle Database Configuration and Agent Configuration Assistant. Both failed with error ora-02084 with following details:
Parameter "orahome" = C:\oracle\oracle92
Parameter "nodeinfo" = NO_VALUE
Agent Service Failed.
I looked up the errror message and found
ORA-02084: database name is missing a component
Cause: The complete database name was not provided.
Action: Specify the full database name.
But where do I specify the full db name, is it a folder that i have to rename?
your help will be appreciated.THANKS
JJ

hi,
I just got the same error. I fixed it by choosing CUSTOM install and removing any part of the SID and Repository name that started or finished with a period. On my case something like this was created by the Wizard: OEMREP.mynetworkname.ad.mypcname. I just left OEMREP.

Similar Messages

Uploading a CSV file and getting Error ORA-01403: no data found in V4.1.1.

I have an issue where myself and another user are unable to upload a csv file to my application using the "File Browse" page item in V4.1.1. I get the following error, "Error ORA-01403: no data found".
This function was working perfectly last week prior to the upgrade of our APEX to V4.1.1 from V3. Other users are still able to upload the csv file, so the PL/SQL behind it must be ok.
So here is where I am up to with testing.
Tested the upload using my login on my PC – Fail
Tested the upload using my login on another PC – Fail
Tested the upload using other user’s login on my PC – Success
Tested the upload using other user’s login on another PC - Success
Any help would be greatly appreciated.
Cheers,
Greg

The offending piece of code was in a block of script that I used from an online sample when I was first setting up this upload script. A colleague had the same issue in another application and rewrote the script to resolve the issue, see below.
I'm still perplexed as to why the majority of users could run it ok, and there were only 2 of us that it errored on. But now it's working for all, and I can go back to building some cool stuff in V4.1.1.00.23.
-- Read data from wwv_flow_files
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = :APP_USERID)
and id = (select max(id) from wwv_flow_files where updated_by = :APP_USERID);
-- Rewritten to the following, which works.
select blob_content into v_blob_data
from wwv_flow_files
where id = (select ID from wwv_flow_files
where UPDATED_BY = :APP_USERID
and LAST_UPDATED = (select max(LAST_UPDATED) from wwv_flow_files where UPDATED_BY = :APP_USERID));

USING DISCOVERER DESKTOP CAN'T EXPORT AND GET ERROR ORA-00000

we use a win 2000 server to export discoverer reports by command-line methods.In the past ,everything is ok. But from last week , we found some reports always keep in export phase and can't export anything, also with ora-00000 error.
there are 2 things should be mentioned:
1. in the past , these reports can export without any error
2. we can export the same reports normally on another server(but we don't want to change server for some reason)
I know Oracle suggest we update to discoverer 10g, but it can't tell me why another client can export normally
so where is the cause?
Discoverer Desktop version - 4.1.46.08.00
EBS version - 11.5.9

Hi
Presumably you have tried rebooting?
If you have windows updates set to automatic it is possible that one of the recently applied updates has done this.
Best wishes
Michael

Installing Creative Suite 6 and get error message

"this serial number is not valid for this product." Just bought this. Why isn't it working?

Error "The serial number is not valid for this product" | Creative Suite

Trying to install windows 7 and getting error message windows must be installed to a partition formatted as NTFS

Trying to install windows 7 and getting error message Windows must be installed to a partition formatted as NTFS

Welcome to Apple Support Communities
Boot Camp Assistant creates a Windows partition in FAT32 to make the Windows XP installation easier.
The problem is that Windows Vista, 7 and 8 require a NTFS partition, so the Windows installer gives this error. The only thing you have to do is to choose the BOOTCAMP partition in the installer and go to “Drive options (advanced)” > Format. Finally, install it

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error.

Hi, I have a HP f380 all in one printer. I have installed new black ink cartridge and get error stating please insert black ink cartridge.
Please Help

Make sure it is a genuine HP cartridge. Take it out and clean the contact on the cartridge and in the printer. Try again.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Tried to install lion on Macbookpro and getting a smart error message?

Tried to install lion on Macbookpro and getting a S.M.A.R.T error message, software up to date and enough free memory

Do you have the 10.6.8 (or whatever came with the machine) install DVDs?
If so you need to boot up with those and run Dusk Utility off the DVD. Check the S.M.A.R.T status at the bottom of the Disk Utility window when you have the MBP's disk selected. If the status doesn't say Verified the disk is on its way out its already dead. It needs to be replaced.
If it says Verified then do a Disk Repair on the MBP's disk. Note any errors you get and rerun Disk Repair until you get no more errors. If that doesn't happen the disk needs to be replaced.
All this cos I bought an iPad and wanted to use iCloud!
The install hasn't caused this. The disk was going no matter what. Its a good thing that you did the install and caught the error or else you might have lost your whole system.
regards

HT1338 Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help neede

Macbook pro two days old...bought logic from app store...logic has installed partly each time i open it up it wants to download rest of programme then stops half way thru and gets error message 'logic is unable to continue with download' help needed !

Hello:
I would trot back into the Apple store and have them fix the problem (or call Applecare with a warranty issue). There is no sense in you wasting your time trying to troubleshoot things on a new computer.
Barry

Installing Adobe Extension Manager and get the error message

I am trying to install Adobe Extension Manager and get the error message ' Requires Photoshop 32 version in range of inclusively 13.0 and 13.9' Please help me solve this, not sure how to proceede after getting a message that there is four updates available to download !

Type <b> about:addons </b> in URL
*plugins and extension -> disable adobe reader

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Purchased and downloaded elements one yr. ago. Now new computer. Have CD, tried to install, after entering S/N get error-"not valid number" What can I do?

Go here (You may need to use the chat option.):
Activation & Deactivation Help
This is the Photoshop Forum.
Note to mod: Please move to the Photoshop Elements forum.

Manually starting Intelligent Agent Configuration Assistant and HTTP Listener

I have installed Oracle 9i on Solaris 8 and it stopped with an "Out of Memory" error during the Starter Database creation. I have fixed the memory problem and have now manually started the Database Configuration Assistant manually and managed to install a new database. Now I am trying to start the Intelligent Agent Configuration Assistant and the Apache HTTP Listener, but I cannot find out how to do this so that I can continue on with and complete the installation process from where I left off.
Do anyone know how to do this? I would appreciate any help that anyone can give.
Thanks
Anthony

Lets start with what product you are installing and why. An Oracle database installation, in and of itself, does not install an HTTP server.
Of course one might also wonder why you are, just now, installing software so old it is in desupport.

While installing HANA studio , i am getting Error

Hi Experts,
While installing HANA studio, i am getting Error " Java installation not found" . I have already installed latest JDK, JRE from www.java.com and also set path PATH.
I am on Windows 7 , 64 bit.
Any one have idea how to over come this Error?
Thanks.

Hi Tomas,
I am on windows 7 64 bit. How should i verify if jdk has been installed correctly? how to verify if correct path has been set.
I am using hdbinst.exe file.
Here is log entries
19:02:46.064 - INFO: SAP HANA Studio kit detected.
19:02:46.064 - INFO: Looking for java installations
19:02:54.685 - INFO:   Found 1.7.0 64bit in C:\Windows\system32\javaw.exe ($PATH)
19:03:01.635 - ERR: No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO: -
19:03:05.137 - INFO: Checking configuration of installation (dialog Define Studio Properties)
19:03:05.137 - INFO: -
19:03:05.137 - INFO:   Looking for java installations
19:03:05.137 - ERR:   No proper java installation found (version 1.6 64bit is required)
19:03:05.137 - INFO:   Parameter "TargetRepositoryPath" is not set
thanks

Installing Agent Configruation Assistant and get Error ora-02084

Similar Messages

Maybe you are looking for