Installing Airport extreme card for 2008 Mac Pro

After some searching I finally found which airport extreme card to get for my 2008 Mac Pro that I just purchased recently . According to the the link below in the Apple archives it is part number MB363Z/A. However the link further down in the thread for the instructions on installing the card doesn't seem to work any more. Anyone know where to find another link for some detailed instructions or pics on installing the card. I haven't found any as of yet. I installed the old extreme card in my G5 pretty easily, but this seems a little more involved in the Mac pro from what I've read so far.
thanks, Craig
http://discussions.apple.com/thread.jspa?messageID=6563623

Ok never mind I found the old link seems to work now with detailed pics and instructions. Sounds like it's a bit of a pain but can be done with patience. Just have to get the card now.
http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

Similar Messages

  • What model of Airport Extreme Card for 2007 Mac Pro 2.6GHz

    I am trying to find what model of Airport Extreme Card I need to install into my 2007 Mac Pro 2.6GHz
    I understand that there is a 2008 card which is incompatible, so I don't want to buy the wrong one.
    Any help appreciated.
    Laus.

    Its really confusing when Apple calls their internal wireless card on a Mac an AirPort Extreme card......and they also market an outboard wireless router called an AirPort Extreme.  See info below:
    http://www.apple.com/airport-extreme/
    You posted in the support community for the Apple wireless routers.....AirPort Express, AirPort Extreme and Time Capsule.
    While it is possible that someone here might be able to answer your question, you will likely receive a much faster and more informated response if you post your question again in the support area for the Mac Pro.
    The link to that support area is here:
    Mac Pro

  • Installing Airport Extreme Card in new Mac Pro 2008?

    Hello, I bought the upgrade kit for the airport wireless n up at the apple store and I am trying to install it in my new Mac Pro 2.8 octo.
    I found where to install it and I did install it but Im not getting any connect at all, though it says airport is on. I installed the software on from the CD it came with also. I am using a D-Link Xtreme Router model 655.
    I read on another forum post that you might have to install a wire for the antenna on top of the card. I didn't see any wire when I installed so maybe that applied to the older mac pros..
    any help would be appreciated.
    These cards are compatible with my router right? I know my macbook pro n wireless connects fine.
    Thanks!

    hi kevin.
    I also bought air mac card at apple store of japan.
    And I installed that card at my new macpro by myself.
    Apple store's genius people said to me, its installment takes 30min,so
    I tried intalled airmac card and working normally in now.
    But this is not customer install part.I think. They did not gave any install
    manual for this part.
    So I installed this part at mac but it was not working at that time.
    After googling,I found some miss at my work. That is not connecting cables at network card.
    You have to connect cable at your network card for using.
    Also you can find your conneting cable at your new mac.
    Please find connecting cable and connect to your network card.

  • How do I install a airport extreme card in a mac pro (Intel 2008)

    How do I install a airport extreme card in my mac pro (intel) 2008 computer

    What Wifi Cards Do Mac Pro 2008 model use???
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/

  • How to setup a network setup with an airport extreme card in a mac pro

    I have installled an airport extreme card in my mac pro. Restarted the mac. The AP black triangle appears on right top of the screen. If I activate the AP than the a light grey triangle appears, with grey bars. I can create a network, than the triangle becomes dark grey with an kind of black computer icon in the grey area. The signal strength shows all blue bars.
    I have two other wireless networks (linksys and another for streaming music) both are working and detected by my imac. But the mac pro does not detect these networks.
    I would have thought that the two networks would be detected automatically.
    Please some advice to solve this problem
    Imac G5; Mac pro   Mac OS X (10.4.4)  

    You won't believe this, but the card is a crock. Mine was installed by an Apple tech at an Apple store. He obviously did not check out reception.
    At home, I tried setting this up right next to a Netgear wireless router (2 feet away!), and got no signal bars. Yet I pull the cover off the machine and I get 4 bars and can connect to an 802.11g network. This stinks. What idiot at Apple designed a card where the antenna is a 1" square piece of metal? Could this be an emi cage? Where did they hide the so-called "built-in" antenna. Who knows?
    See if you can aim the back of the machine toward the wireless router. There is a back door into this mother, through the fan(ny) opening.

  • Installing airport extreme card in a macbook pro

    need help replacing the airport extreme card in my macbook pro. need details on how to do it

    Without an airport extreme card, there won't be any Wifi signals going to and from the router (unless you have your machine hooked up via ethernet cable, in which case you don't need an airport card because the signal is transmitted through the cable). Most Macs have a card installed - which Mac do you have?

  • 2nd graphics card for 2008 Mac Pro 3.1

    I need to connect a third monitor to my 2008 Mac Pro 3.1 - 2.8/8 core - so I can view and control Logic from my vocal booth. I don't want a monster card. Just the bare minimum. The monitor will only be on when I'm recording by myself. I appreciate suggestions and any warnings of pssible problems.
    Thanks for the help.

    ATI Radeon 5770
    http://store.apple.com/us/product/MC742ZM/A
    http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
    How To Install and Remove Memory Mac Pro
    https://support.apple.com/kb/HT4433
    2x2GB FBDIMM DDR2 667MHz @ $32http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    Hardware Monitor
    http://www.bresink.com/osx/HardwareMonitor.html

  • New airport extreme card in 2007 mac pro?

    I have a 2.66 mac pro which i purchased in september 2007. I talked to one lady at the mac store in Roseville, MN and she said I needed the old airport card, which she told me is model # MA688Z/A. is this true? or can i use the newer airport extreme card? the old card is hard to find and if i can use the newer card, model # M8881LL/A, that would make my life so much easier. Please advise.

    I've talked to a few more people from different mac stores, and they said that the first person i talked to basically didn't know what they were talking about. they said that the new mac pro and old mac pro both take the same airport card, model MB363Z/A. sorry for all the run-around. can anybody confirm or dis-confirm this info?

  • Airport signal strength for 2008 mac pro

    Hello everyone,
    So, I have a 2008 Mac Pro 3.0Ghz. I read on some of the threads that the airport signal is kind of weak due to the aluminum case. Is this true on all the mac pros, or only on some? I plan to get rid of the USB wireless adapter and use the internal airport option.
    Thanks,

    The internal airport is way better, you'll be a lot happier. I had problems recently when I updated from 10.5.5 to 5.7, but after upgrading my wireless router firmware, I've actually got a stronger signal than before~
    People having issues, should check with their router as well. It's not always the card, even if a different computer is getting a great connection. I think it's a case by case kinda thing.
    Anyway Highly recommended

  • USB3 card for 2008 Mac Pro

    am considering adding USB 3 capability to my 2008 Mac Pro (which still works great ... I had it overhauled last year...)
    I imagine the best way to do this would be a PCI Express card?  I still have two unused slots in the back.
    Can anyone advise which would be be the best card to get?
    I'm currently running Mavericks - currently everything is working, including my four e-SATA ports currently on two PCI-X cards...
    w

    yes! thank you.
    a google search would show lots of options, but for someone like me (who is less savvy than most of the contributors to this discussion board) it's hard to know exactly what card will work with my machine.
    Looking at the Sonnet cards, this one seems like a very good bargain -
    <https://www.google.com/shopping/product/11936350470791125384?q=Allegro+USB+3.0+P CIe&bav=on.2,or.r_cp.r_qf.&bvm=bv.59568121,d.cWc,pv.xjs.s.en_US.1EneOJbgwUk.O&bi w=980&bih=868&tch=1&ech=1&psi=ikrZUv6xAurlsASmpICgCg.1389972106495.5&ei=k0rZUs-N DOKosASy5ICgCg&ved=0CJcEEKYrMAE>
    would this work for me?  the price is less than I expected for real true USB 3.0
    thanks again
    will

  • Help with new video card for 2008 mac pro

    I was looking to upgrade the speed of my 2008 Mac Pro Video
    I currently have a nvidea 8800 512mb
    Looking for any suggestions?
    I need something that will not block the 2nd 2.0 pci slot?
    From my understanding my mac has two 2.0 pci slots and one is used by the video card?

    http://www.ebay.com.au/itm/Nvidia-GTX-780-3-GB-for-Apple-Mac-Pro-/331071998403?n ma=true&si=TLQfb78DRSdpDaz0cZAp4FFlvP8%253D&orig_cvip=true&rt=nc&_trksid=p204767 5.l2557
    this Nvidia GTX 780 is the best your mac can handle safely, the card can work on 1 slot at around 95% according to another site:
    http://www.techpowerup.com/reviews/Intel/Ivy_Bridge_PCI-Express_Scaling/3.html
    this is what i plan to use in my mac pro 3,1

  • Basic video card for 2008 Mac Pro?

    An old question, I suppose, but products change....
    The video card in my Early 2008 Mac Pro seems to be flaking out -- hardware crashes and the like.  I'm just using it as a server, and don't need a particularly high end (= expensive) replacement.  Any suggestions?  Thanks!

    "PC cards flashed to Mac Firmware do not show a picture until Mac OS X is fully up and running, so debugging, alternate booting, running Utility DVD or Recovery HD are extremely difficult."
    Grant is right about many flashed cards. Specifically, flashed 5770 and 5870 cards show no EFI boot screens unless you hapen to use a VGA display connected via lower DVI port. Not very handy.
    Many flashed Nvidia cards DO show the boot screens and thus function like a card you bought from Apple store.
    There are now flashed GT120 cards available as well. You need to be certain that you are clear on whether your Mac Pro is EFI64 or EFI32. (Mac Pro 1,1 ad 2,1 are 32, all of the newer ones are EFI64)
    The EFI64 machines have a much better array of options. If you are unclear, it is always better to ask questions before rather than guess, especially if the ad you are looking at seems ambiguous.
    The screens before the desktop shows up are called the "Boot screens" typically and are there due to EFI drivers on card. From desktop on the OSX drivers take over.

  • Video cards for 2008 Mac Pro with 4 20 inch Cinema Displays

    I have an early 2008 Mac Pro Quad Core with 16GB RAM. I run a 4 (20 inch Mac Cinema Display) monitor configuration off of it. one of my video cards just failed. They were never very good at handling FX in FCP anyway. I want to upgrade and get good cards for 2 displays each and if possible, video cards that will facilitate FCP X as well. What should I get?

    OS X has drivers in 10.6.5
    It is the ROM firmware that makes it work though there is help there too now for PC cards and flashing.
    OWC is over pricing.
    100s of threads asking the same question for the last yr.
    5870 also, but costs $200 more.
    More about using 6870 and others:
    netkas.org
    PS: the 'short' url for the Apple ATI 5770 w/o any user/cid - Product /MC742ZM/A
    http://store.apple.com/us/product/MC742ZM/A
    Radeon 5870 vs 5770 GTX 285 4870
    ATI Radeon HD 5770 - specs etc

  • AirPort Extreme Card for Power Mac G5 (August 2005) 7,3

    I've Power Mac G5 (August 2005) Model 7,3 (Model M9748)
    Is this Airport Extreme Card the right one for my mac:
    1. Airport Extreme Wireless Card 802.11G A1026
    Is there any difference between M8881LL/A A1026 and 802.11G A1026 or are they the same?

    Shree, Welcome to the discussion area!
    Yes that card is what you need. No there is no difference between the cards referenced with those terms.

  • Airport Extreme Card for power mac G5 help!!

    I have a late 2005 Power mac G5. I got an Airport Extreme wireless card. I put the card in there, and there are 2 wires i presume or have read to presume they are used for the antenna. I attempt to put 1 wire in the port on the back of the card. The wire and the port on the back of the card do not match or plug in flush.
    Then i remember I have the "T" shaped antenna and attempt to plug that into the back port of the airport extreme card. again it does not really fit flush in the back of the card.
    What do i need to acquire to connect this card to either the wires or "T" shaped antenna. Ive seen some installation instructions and notice that some of the wires have a more suitable connector. Please help! Thanks, ~adam~

    That computer accepts a combined AirPort and Bluetooth card; the standalone AirPort Extreme card can't be used with it even though it may fit onto the logic board. Click here for more information.
    (44057)

Maybe you are looking for

  • Acrobat X (C6) does not start

    Acrobat X within CS6 does not start. I tried uninstalling CS6 and reinstalling and it still doesn't work. I tried unilstalling just the Acrobat X Pro module.  I'm not sure how to install just this component. I'm running Win7 Ultimate 64-bit on a Dell

  • Have just purchased Face Time and it now appears on the dock but I'm unable to open it.  Error message tells me there is an internal Face Time error. error.

    Have just purchased Fac Time.  it is downloaded and the icon appears on the dock.  When I try to open it i get the message  "An internal Face Time error has ocurred".  Any suggrstions for a novice.

  • Need Help on WorkFlow

    Hi All, How can we hide the "OK" Button in the WorkFlow Notifications Page. Can any one please give us any idea? Thanks in Advance, Dhana

  • Activations Quickly 1-877-800-3701

    After waiting 38hrs and 24min, and reading the forums, I finally called the AT&T activations department at 1-877-800-3701. I was put in contact with a nice person named Elaine, who in a matter of 5 minutes, sent the activation email and unlocked my i

  • Imovie data disappeared

    Hi. Am working on an OSX V10.9.4 and using the newest version of imovie. Spent zillions of hours working on two projects: An imovie film with video clips A slide show with a combination of stills and the odd video clip  The finished film has disappea