Installing an extreem card into G4 12 DVI powerbook 1ghz

I have just installed an extreem card into 12 dvi powerbook and upon startup I get arepeated message that I must restart. startup halts and after repeated attempts still cannot start up
any help would be welcome
Thanks

Either the card is bad or not seated properly. Pull it out and make sure you can still boot and haven't damaged anything. Then shut down and try again making sure it is firmly pushed all the way into the connector and not upside down either!

Similar Messages

HT3024 after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

after installing airport extreme card into g4 ibook 1.07ghz 512 ram it will only boot to open firmware, any ideas why? please help!

Hi David,
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Tried resetting the PMU for PB/iB?
http://docs.info.apple.com/article.html?artnum=14449

Installing PCIe 16x graphic card into XServe

I would like to install another graphic card into a new to buy XServe next to the onboard graphics.
Theoratically, the size dimensions of a standard NVidia GT 240 should fit in physically. Also, I don't think the heat would be an issue. But what I've read in the installation guide, seems like a problem:
About PCI Express Cards for the Xserve
The Xserve accepts cards that meet these specifications:
- x16 PCI-E cards
- 6.6 inch maximum length (slot 1), 9 inch (slot 2)
- 25 W maximum power consumption per card
According to NVidia, the board consumes about 69 Watts maximum. Which is conforming to the PCIe specs (max. 75 Watts).
Thus, why does Apple give a 25 W limit? Is the power consumption the core of the problem that might be overcome by installing two power supply units? Or might it be the riser that defines the limit here?
I would really like to have more CUDA/OpenCL capable GPU's in the system, even if they are not among of the most powerful of their type and a GT 240 would fit perfectly into my needs. But I cannot risk damaging or unstabelizing the system or loosing warranty etc.
Thanks in advance!
TB

Thanks for the reply! Well I think the heat problem would be the best solvable one. By now, the server is planned to be equipped with:
- the dual CPU option
- 12GB RAM
- SSD drive
- 3 or 2 harddisks
- dual power supply.
Yes, there would already be some heat producing stuff in there but the graphics board comes with another active cooling - if this is a pro or a con concerning airflow is another question. At least, the PCIe card is the last in the chain of components the airflow has to cool down. Also, the server would be located in a temperature controlled environment among our other servers.
The workload would most likely not be 24/7, but should hit 100% of each core of both CPU's and (hopefully) both GPU's for quite a long time, hours at least, more liklely some days - well both, CPU & GPU wont be stressed constantly at 100%, more or less alternating though.
Thus, if you expect the heat problem to reason apple to give this wattage limit, it would be most interesting to me, if there is anybody who is running an extension card that defenitely consumes more than these 25 Watts?

Want to install a wireless card in a MDD

hi
i would like to install a wireless card into my powermac G4 MDD.
i bought a an external usb wireless but i could not find a driver for it and had to return it.
what kind of wireless card can i install that will be found by the system or where drivers are easy to get for macs?
also, where does it install, in an available pci(???) slot or somewhere more internal?
the mac is running 10.5.8, i think, im settiung it up for my kids to use
thanks

Hi! Probably depends on whether you are running an "n" network. The old airport card is slow and using a newer pci card that has "n" capability if your router is an "n" router is a lot faster. OWC is a good place to buy Mac stuff and their prices are good also. Though I haven't used one I'd probably try THIS card for its "n" capabilities. I'd probably get a new airport extreme base station but they are about 179 bucks from Apple. Tom

When I install my SD card nothing happens

When I install my SD card into my imac nothing is happening anymore? Any sollutions?

Get the photos off the card and reformat it using your camera's format command
LN

I just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing.

i just got a new iphone 4 for att and my friend installed the sim card in it for me. the imessage function isnt connecting with the my cell number. a while back i had logged into my apple account on someone elses cell phone and their number keeps showing. when i try to just select my number to send and recieve imessages from it will not show up. i can send and recieve regular text but not pictures or imessage. i have tried logging off and restarting and nothing has worked.help please!!

Did you remove your account information from the other person's iPhone?

Installed airport card into my imac G4 flat panel and now it work

I purchased an airport card from Mac-pro as Apple does not sell them anymore. I installed it into my IMAC G4 flat panel as per the instructions. Now, when I turn on the computer the power light comes on, and the screen is black and it really isn't making any noise, as though it is not starting up. It was working just fine before I installed this card!!!! can anyone help??!?!?!?!?

The following Apple article provides the details of
installing an AirPort card in the Flat Panel iMac
G4s. You may want to double-check it to see if you
might have missed something in the the installation
process.
I installed the card properly, as per the instructions you forwarded to me. I did have some trouble getting the card to completly fit into place, one side seemed to go in easier than the other, but it did go in. Is there anyway to get this machine up and running again?

Just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

just installed elements 9 , plugged camera memory card into computer, I see it on my computer but adobe says can't find device ?

Perhaps the type of file on the camera card is not supported by elements 9 (I have elements 12 and all of my pictures are jpegs so I wouldn't know). You might have to save the pictures you want to your computer as jpegs.

Can I install a GPIB-PCII/IIA Card into a windows XP computer and if so how?

Can I install a GPIB-PCII/IIA ISA Card into a windows XP computer? If this is possible can you give me the stsps needed to do so.

Hello,
No, this is not possible. This "old" board isn't supported under Windows XP. Check this site for an overview: http://www.ni.com/support/gpib/versions.htm#pc
Regards,
Luca
Regards,
Luca

Installing Audigy 2 ZS Platinum Pro Card into Dell Inspiron

Hey,
I have tried to install my old Audigy 2 ZS Platinum Pro Card into my new Dell Inspiron 530, from my old PC. Although, the power cables have different pins (the PC has a smaller input). Also, where the SPDIF cable etc. goes into the DVD dri've, there are no available slots. What can I do? Sorry if there isn't enough information, I'm really confused.
Do?newer recording soundcards, such as the elite pro etc. have different cables for newer PC's?

Are you referring to the floppy power connector? If so, you do not need to plug that in unless you are using external peripherals. Also what do you mean by no available slots? Is the SPDIF connector from the DVD dri've plugged into the motherboard? If so then you can unplug it from there and plug it into the sound card instead since you will be using the sound card to output sound now rather than the onboard sound. Perhaps you could show us some pictures of what you are talking about.

How do I install the sim card?

How do I install the sim card on the 5s?

Use a paper clip and push it into that hole on the right side of the phone. The SIM container will pop out. Change the SIM and push it in.

Window 8.1 is not allowing Elements Organizer 11 to import pictures from SD card into Organizer

After installing Windows 8.1, I am no longer able to import pictures from SD card into Organizer as Elements simply stops working after Import from Card reader is selected. Obviously I am shutdown from importing pictures.

Windows 8.1 is not allowing Elements Organizer 11 to import pictures from SD Card in card reader into Elements Organizer. The Elements Program goes to a blue circle and the program times out.
I have:
Tried different SD cards
Tried different card readers,
I can import off files or folders. However card reader does not show up on this menu within Elements.
There is obviously some workaround that could be contemplated BUT Elements Organizer cannot import from SD card in card reader and this is a very inconvenient situation. It worked fine in Windows 8.0.
I would appreciate a reply. Thank you.

Satellite L350-159 - Can I install a graphics card?

Hello everyone, I got a friend to check what graphics card I had the other day, as I play games and noticed that the graphics weren't fantastic. He checked it out and then told me I actually haven't got a proper graphics card!
I'd love to remedy this, but is there any way to get into the laptop to install a graphics card? and if so, what kind of graphics card would you recommend? some are rather big, and i'm not sure they could fit. I noticed some panels on the bottom of my laptop that can be screwed off - do one of those lead to a place to put a graphics card?
Thank for the help,
Michael

Hello
The graphic card cant be exchanged because its soldered on the mainboard. So thats not possible to exchange it.
If you dont believe it, read this interesting Toshiba document:
http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm
As Akuma said the point is that the Satellite L series is not designed for gaming. I have a Satellite L300 and a Qosmio X300. The Satellite L is really great for my work, picture editing, E-Mails and office. The X300 is really perfect for games Its fast enough for all games I have.
Greets

HD video from SD card (SDHC card) into iMovie?

Hi,
It looks like others have had similar problems, but reading various replies, and being new to Mac and video editing, I can't seem to get the info I need.
While on holiday we bought a Sanyo xacti HD1010 camcorder/still camera. All data is on HC SD cards. When I try and transfer to the iMac, everything goes into iPhoto, the video clips with a green tint to them. I downloaded the latest QT which enables me to play the individual clips, and managed to import the clips to iMovie, but iMovie crashes each time i try and play a clip. Other clips, (not HD ones and from a standard SD card) play and edit fine.
Could someone please assist, as I have three 8GB cards to edit!
I'm also going to need some help installing a 500GB external hard drive to store everything. (We already have over 10 000 photos in iPhoto and about three hours of edited video waiting togo onto DVD)
Many thanks,
DH

I have a similar Sanyo ..not your hi-def Xacti HD1010, but the more low-tech standard-def 'waterproof' VPC-CA8EX..
..which also records - like yours - in MPEG-4 AVC/H.264. But yours is proper hi-def AVCHD H.264.
I put my SDHC cards into a fast SDHC USB2 'Christallo' brand card reader, and import the video from there. The card reader shows on my Desktop as 'XACTI', and then when I start iMovie it automatically detects the 'camera' and starts reading the clips from the card and showing thumbnail images. When I click 'Import All' it whizzes through the clips, importing in a tiny fraction of 'real-time' ..about two seconds for a 1-minute clip.. finally reporting that it "..Imported 21 minutes and 44 seconds from 43 clips.." in less than a minute. Then it spends about 2 minutes generating actual thumbnails of these clips in iMovie '08.
(..It's generally, I find, faster to read a camera's, or camcorder's, images through a separate card reader than reading by connecting a camera to the Mac..)
So my clips don't go through iPhoto ..they're - automatically - imported straight into iMovie '08 on an Intel-powered Mac.
(..Ah, no; it's still churning through thumbnail-generation; that was an estimated 2 minutes for just the first day's clips ..but these clips are split over four separate days' shooting ..now it's finished.)
As you're using a similar codec (method of recording) - although in hi-def, with a wider screen format and a great number of pixels - your imports should, I think, behave similarly to mine, though importing may be slower, as you have more info in each 'frame' of video.
If I open iPhoto after connecting the card reader, iPhoto sees a device called 'Xacti', reads and displays all the photos and video clips, and when I click on 'Import' it briskly brings them all into iPhoto, without the time which iMovie spends generating video thumbnails afterwards.
None of the video clips have "..a green tint to them".
If I then start iMovie, I get the message "iMovie needs to generate thumbnails for the videos in your iPhoto library. This process may take several minutes. You can postpone this operation by clicking Later, but your iPhoto videos will be unavailable until the next time you restart iMovie". ..So there it goes, generating its video thumbnails. After one minute, it thinks that it's still going to take a further 7 minutes to do this..
(..Enough time for me to go and have breakfast all over again!..)
iMovie seizes up and becomes completely unresponsive while it's generating the thumbnails which it wants to display for the Xacti clips stored in iPhoto..
My setup is QuickTime Version 7.5.7 (249.30.1) ..also called Version 7.5.7 (995.26.2) and iMovie version ..well; I can't yet tell you what version (..but it's the latest..) because iMovie is unresponsive while it's creating these darned thumbnails! (..Oh; about another "5 minutes" to go.. this really is a slow way round; importing directly into iMovie in the first place, without using iPhoto, was -f-a-r- faster!..)
Meanwhile, about your hard disc;
It ought to be a FireWire-connected disc, not a USB-connected disc, as USB is far slower for continuous data transfer - such as chunks of video while editing - than FireWire, despite what salespeople tell you in shops.
Assuming it's a FireWire disc, it's probably been pre-formatted for use with a PC, not a Mac, so you'll probably need to format it as 'Mac OS Extended' instead of 'PC Exchange - FAT32'. As it's large - 500GB - you'll probably also need to partition it.
Instead of writing out all over again how to do this, I'll just refer you to another thread - read all the way through, including the bits about 'Options' and choosing 'Apple Partition Map' or 'GUID' - here: http://discussions.apple.com/message.jspa?messageID=8542065#8542065
Ah, now: iMovie; "less than a minute" ..till thumbnails are complete. Yup, here they all are, and playing nicely. At last!
So; I can tell you what my Sanyo Xacti (standard-def, 4:3 shaped movies) does ..or rather, how importing works. So it should work just the same - I guess - with yours.
I don't have any conflicting codecs which I could have downloaded and which might interfere with iMovie - do you?
But I would guess that the crashing is more likely related to "..we seem to have used 295 so only 5 G left.." ..ANY Mac is going to have trouble if you're trying to handle hi-def and you've only 5GB of storage space left.
STOP WHAT YOU'RE DOING and configure that external disc, and unload some of your 295GB files onto that to give your Mac at least 10% - i.e; 30GB - "breathing space"!
Then, with a properly-configured external FireWire disc, and 30GB space on your internal disc, try again. Oh, and you may find importing runs faster with a fast external card reader, and by starting up iMovie instead of iPhoto (..disable iPhoto's Preference marked under the 'General' tab "Connecting camera opens: "iPhoto" ..set it to "No application").

Can't install a video card

Built a PC w/KT6 delta mb a week ago. Have been unable to successfully install a video card. Tried ATI 9600SE first. Took that back and got a Diamond S90 w GeForce FX 5200 123 8xAGP. Loaded new chipset drivers and used up to date NVidea drivers. Screen goes blackafter Windows 98 intro screen. Any ideas? I've reinstalled WIN98SE 5 3 times.....no luck.

I had the same problem with new video card in Win XP (and I think this may apply to Win 98 also). I am using a KM2M board with built in video.
After installing drivers for new video card, boot into windows with monitor still attached to built in port. Go to Display Properties (Where you setup screeensavers, etc.) and go to Settings. Set Windows to use your new video card by default and Apply. Screen should go blank. Move monitor cable to new card video port and Windows will return. Set resolution, etc. to desired levels.
P.S. Wonka needs to just tell everyone to get a 400 watt or better PS to solve all problems. Then we poor wogs won't be chastised every day about PS specs.

Installing an extreem card into G4 12 DVI powerbook 1ghz

Similar Messages

Maybe you are looking for