Installing an old version of Flash on a Macbook Air

Hi, I have an old 10.6GHz Macbook Air which I need to install Adobe Flash onto. The newest version requires a 10.83GHz processor or faster. Is it possible to download an older version of Flash that will be compatible with my slower processor?
Thanks

Hello,
I'm thinking you have a few typos.  Do you mean 1.6GHz and 1.83GHz, instead of 10.6GHz and 10.83GHz?  Either way, the latest version of Flash Player will work fine on 1.6GHz. The tech specs list the specs for optimal performance, but if your system is a bit lower than what's listed, it should still work fine.
Maria

Similar Messages

  • How can I download an old version of Flash?

    The newest version of Flash broke my billing system back
    office. The developers of this billing system are based overseas
    and are extremely unreliable so I cannot depend on them to fix this
    in a timely manner. It could be 2 days or 2 months. I just don't
    know.
    In other words, the newest version of flash broke the program
    I need to do my job. I need to rollback to a previous version as
    soon as possible.
    I found a file on this forum called "fp9_archive.zip" which
    contains old versions of flash. However, everytime I try to install
    any version besides 9r124. I get this error:
    "MessageBox: 12582960,"The version of Adobe® Flash®
    Player ActiveX that you are trying to install is not the most
    current version.
    Please visit
    http://www.adobe.com/go/getflashplayer
    to obtain the latest, most secure version."
    Please help me! I am not a developer or an IT guy. I am just
    an accountant who foolishly clicked "update flash" when I was
    spammed to update it. Now I am banging my head against the wall
    because there are no clear and concise directions on how to roll it
    back.

    Jason,
    I am no expert but I was looking to solve a problem I have
    and I ran accross information that may help you.
    How to get previous versions of Flash Player (Note: Adobe
    supports and recommends the latest Flash Player.)
    If you are a Flash developer and require a previous version
    of Flash Player for testing detection schemes, refer to "Archived
    Flash Players available for testing purposes" (
    TechNote
    tn_14266).
    Adobe has made these archived players available for download
    at the request of the Flash developer community. Adobe Technical
    Support does not provide support for the installation or use of
    these old players. These are not intended for general use.
    The following may help you solve your problem.
    Error while installing older version: The version of Adobe Flash
    Player ActiveX that you are trying to install is not the most
    current version
    If you previously installed a later version of Flash Player
    for Internet Explorer, you may be prevented from installing an
    earlier version. For example, if you installed Flash Player
    9,0,115,0, and attempted to install version 9,0,47,0 the
    installation would fail. In this case follow the instructions in
    "Safe versions security restrictions when installing Flash Player"
    TechNote
    kb402435).
    Here is more information I found about unistalling that may help
    you.
    But I would try TechNote kb402435 above first because it
    looks like it is directly related to your problem.
    Uninstall all previous versions.
    Before you install Flash Player for any Windows browser,
    uninstall all previous versions. For instructions on removing the
    player, please see "How to uninstall the Adobe Flash Player plug-in
    and ActiveX control" (
    TechNote
    14157).
    Note: All applications must be closed before you run the
    Flash Player uninstaller. Quit all running applications, including
    all Internet Explorer or other browser windows, and all Instant
    Messenger clients. Check the Windows system tray carefully to make
    certain no applications which might possibly use Flash Player are
    still in memory.
    Good luck.
    Regards,
    Bob

  • Firefox is not allowing me to install the latest version of Flash Player, or older versions that would allow me to open youtube etc. any suggestions?

    Hi there, Firefox not accepting latest version of Flash Player, or older versions that would allow me to open youtube and is continuouing to block it. any suggestions?

    '''''"... Firefox not accepting latest version of Flash Player ..."'''''
    Firefox shouldn't keep you from installing Flash; Firefox needs to be closed before attempting to install Flash - Adobe rules for installing Flash.
    Also, it seems that you have a real old version of Flash installed.
    '''Shockwave Flash 9.0 r45'''
    Two versions of Flash Plugins installed may confuse Firefox as to which version to use.
    You should download and run the Adobe Flash uninstaller program before attempting to install Flash.
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  • I've "successfully" installed the latest version of Flash Player. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon in the trash now? (I am on a Mac) Thank you!

    I've "successfully" installed the latest version of Flash Player, as recommended by Firefox. How do I find where it "lives" so that I'm certain it's in there. Also, do I put the App icon that appears on my desktop, in the trash now? I am on a Mac and I am not technically inclined.
    Thank you!

    Your list of plugins shows that you have installed Flash 10.2 r152 which is the current release version.
    You can also confirm that Flash is installed by visiting this link - http://www.adobe.com/software/flash/about

  • How can I install an old version of the Adobe PDF Reader plug-in/add-on for Internet Explorer?

    I have installed an old version of Adobe Reader (X or 10.1.4), but my Adobe PDF Reader add-on in Internet Explorer remains version 11+...how can I get an old version of this plug-in?

    The new serial number is to the right of your chosen download.

  • Hello. I can't watch videos on dailymotion since I installed the latest version of flash player.

    hello. I can't watch videos on dailymotion since I installed the latest version of flash player.Does anyone know how to fix this?

    Could you please let us know the operating system that you use and browser?
    Please let us know what you see in the following page: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
    Thanks,
    Sunil

  • I have installed an updated version of flash player on my mac but I still cannot view videos on line

    I have installed an updated version of flash player on my mac but I still cannot view videos on line.
    I am running mac os x 10.6.8 i have an inte processor.
    What do I need to do?

    How to perform a "clean install" of Flash Player in Mac OS X

  • Are old versions of Flash Player available?

    Are old versions of flash player available?

    You can get FP 9 by specifying an older OS version at http://get.adobe.com/flashplayer/otherversions/
    Older FP versions can be downloaded from http://kb2.adobe.com/cps/142/tn_14266.html

  • Old version of Flash in Chrome on Mac

    I'm using a Macintosh running Mavericks (10.9.5), Chrome 38.0.2125.122, and according to adobe.com, I have Flash version 15,0,0,223 in Chrome and should have version 15.0.0.242. It sounds like my system is quite a bit behind on Flash versions. I just got back from a cruise where I had very limited internet connectivity -- don't know if that contributed to the problem. I don't remember ever installing any special version of Flash, and don't see any Flash related extensions.

    I tried trashing the google chrome.app from the Macintosh, emptied the trash, and reinstalled google chrome from a download. I see exactly the same thing - same bookmarks, same extensions and -- most importantly, adobe.com still says Flash reader is at version 15.0.0.223; any idea of what's going on?

  • Installing the latest version of Flash Player

    Since installing the latest version of Flash Player I receive a constant "Plug In " failure message. I have re installed, uninstalled, sent error reports, checked my system, followed trouble shooting instructions.  It still does not work. Is the upgrade a dud? Tried to send this message to "contact Adobe three times, Where to from here?

    ATTENTION MAC CUSTOMERS - Flash Player 13 "Plugin Failure" Workaround

  • Have an old version of Premiere Pro 1.5 (windows) i bought a new mac.  i'd like to install this old version to my new computer.  can i get a download program for my mac?  how?

    how can i install my old version of premiere pro 1.5 (windows) to my new Mac computer?  is there a download?

    Unfortunately, older versions of Adobe programs are not supported for platform swaps.  You can read about it on the following page:
    Order product | Platform, language swap

  • I want install an old version of itune since the new version does not sync with my iPhone  but the old version I installed did not play rather it says that it can't read a file itune library .itl written by Newer version what do Ido

    I install an old version of itune since the new version does not sync with my iPhone  but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work

    You need to restore the pre-upgrade backup of the library file in the manner shown in  Empty/corrupt library after upgrade/crash.
    tt2

  • Hi I am trying to install my old version of adobe photoshop 5 onto my new iMac,but it says it is not

    I am trying to install an old version of adobe photoshop 5 on my new imac,it says it is not supported,any ideas !

    No ideas. You need to buy a new version.
    Mylenium

  • What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean?  I am trying to install an old version of Quark on my 2010 Macbook pro.

    What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean?  I am trying to install an old version of Quark on my 2010 Macbook pro.

    jennyba wrote:
    What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean?  I am trying to install an old version of Quark on my 2010 Macbook pro.
    As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
    I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation.

  • Why can't I install the newer version of Flash when I already have the older one?

    My virus software is turned off. I have Flash currently on my computer. In the troubleshooting page I can see the clouds in the picture so I know my current flash is working.  I went into the internet settings for add-ons and the flash is currently enabled.  Why can't I install the newer version of Flash? I tried the run and save option and it still didn't work. I can see the installer in my downloads folder. But, all I get is a black blank box that does nothing. What else can I try to get the installer to actually install the updated version of flash?

    Try the offline installer(s)
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player for Mac OS X

Maybe you are looking for

  • How to use a bind variable in XE for accessing data from different sources

    Hi, I am new to XE and trying to create an application like this: (region source) Select * from v$session@:P1_DATABASE ; My intention is to give the name of the database at runtime to fetch the relevant data. But I am getting error like this 1 error

  • IPod mini causes Windows XP to reboot!

    Within a second or two of plugging my new iPod mini into the USB 2.0 port, my Windows XP system automatically reboots. * iTunes is running. * system is Windows XP * I didn't make any keystrokes or mouse movements/clicks This happens EVERY TIME the mi

  • Bank Account Reconciliation

    FI Experts, client do not have a clearing accoutn set-up for outgoign checks, therefore I am reconciling account manually first, before I introduce them to teh clearing accoutn. I  updated the encashment field for all outstanding checks, now I need t

  • Storer: Error in parsing:Could not process

    ZENworks for Desktops 6.5 SP2 Netware 6.5 SP2 Sybase DB 8.0.2 (4339) ZENworks Agents (still) 4.01xxx ZENworks Inventory Service Console Massages: Starting the Upgrade service. The database has already been set to the Ready state. The Upgrade service

  • Virus Scan for KM

    HI all, i am configuring the Virus Scan for KM. i downloaded the VS Adapter from the SAP and created group,providers and profile in the visual admin. i checked in <server_name>:<serverpot>vscantest its working fine. but i could view that services in