Installing and configuring 2.88MB floppy disk drives

Hi There,
I have couple of questions. So if you can help me with those,
it is greatly appreciated becuase it is extremely hard to find
something on sun's website.
I am running Solaris 2.6 on my intel (x86) machine
(what a rookie? huh).
Questions:
1)- If I get 2.88MB floppy drive, do solaris give
me any problem with that? Which documentation
should I look for this.
2)- Same as question # 1 but I want to install
Iomega ZIP 100.
3)- I want to install a modem on my solaris,
which modem should I choose? Is there any
modem in the market that comes with the
installation manuel for Solaris and initialization
strings, etc.
If you can point me to the right directions with
those questions, that would be really appreciated.
Please "Cc" or "Bcc" your message to "[email protected]"
while replying to this message. I hope you have
a nice day.
PS: Don't tell me to go to access1.sun.com for my
questions, because there is nothing there or there
is something but it is invisable to human eye.
Alptekin "Alp" Cakircali
[email protected]

I can only answer the easiest question, #3. Any external serial modem would be the best solution. There are a good number of interal modems that are not Plug-And-Pray...but if the modem fails, you will have to power down, pop the top on the computer, and switch out the internal modem. I've had that happen twice (yeah, the house I'm renting has bad wiring and it shows it lightning storms). You might end up spending $50.00 more for an external but you will get a sense of security especially with the lights letting you know what's going on. It's just easier to troubleshoot coming from a support point of view.

Similar Messages

  • Install and configuring JDBC Driver in SAP Java stack

    Hi Experts,
    We are fetching data from GRC to BIW, for this we are using UD Connect in biw.
    For this we need to configure and installed the JDBC Connectors.
    Please suggest how to go about this.
    Thanks,
    Vijay

    Hi
    Check this SAP Notes
    1347514 - How to setup and configure the webi/deski JDBC connection for the Microsoft SQL Server 2005 and Oracle 9i&10g Database
    1602614 - How To Install And Configure Microsoft SQL JDBC Drivers
      831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 / PI 7.3 JDBC Adapter
    Check the SCN blog
    Michal's PI tips: JDBC/JMS driver deployment - now more forceMode=true
    Configuring the JDBC Adapter - Advanced Adapter Engine - SAP Library
    Regards
    Ram

  • Floppy Disk Drive for Mavericks

    Hello
    Does anyone know of an FDD for a mavericks mac? I would like to create boot disks for an old mac. Is this a good method to consider? I am not sure how else to go about this. If there is an alternative, whatever it might be, please let me know.
    I apologise for posting here but this relates to older machines in a way.
    Thanks in advance.

    The original system for a PowerBook 2400c/180 was 7.6.1. Other supported systems (according to Apple's technical specifications) were 8, 8.1, 8.5, 8.6 and 9. You would need to purchase an appropriate Apple system CD. Ensure that it is a retail disc (for all models), not a disc for a certain (other) machine.
    You can use one of the Apple CD-ROM drives above, providing that you have the proper HDI-30 cable. See the manual for details about connecting SCSI devices and about booting from a CD.
    If necessary, and if the already installed operating system is working (and you can navigate the Japanese menus), you should at least be able to create a Disk Tools PPC floppy on the PowerBook. Use the Disk Copy 6.3.3 program (the Make a Floppy command under the Utilities menu) for this. I assume that you have the external floppy disk drive for the PowerBook.
    www.info.apple.com/support/oldersoftwarelist.html
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/System/Mac_OS_8.1_Update/Disk_Tools_PPC.img.bin
    http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English -North_American/Macintosh/Utilities/Disk_Copy/Disk_Copy_6.3.3.smi.bin
    One may also want to try to modify a Disk Tools PPC to hold CD-ROM software, thus allowing a CD to be read when the computer is running from the floppy disk system.
    Additionally, since the computer in question has PC Card slots, an inexpensive PC Card adapter for CompactFlash and a CompactFlash memory card can be very useful for file transfers. In certain PowerBook models, such a CompactFlash card (reformatted to Mac) can even act as a startup disk (if it has an appropriate system folder).
    Jan

  • Solaris 8 Floppy Disk Drive Problem

    Hi to all!, I need help with Solaris 8 10/00 Intel. I�ve installed it and everything works fine, but I cant make the system to recognize the floppy disk drive, everytime I do a "volcheck", it just ignores it. Inside CDE happens the same thing, when I do check the floppy, nothing happens. Any clue?. I�m using an AMD Athlon 700, with VIA KT133 chipset. Thank a lot!.

    Try "ftp" + your email address. (but "anonymous" works, too).
    Perhaps a typo or there was some other temporary problem with the
    web site.
    The K7M boards have different bios release numbers, it seems the
    first bios release had a revision number of 1007:
    ftp://ftp.asus.com.tw/pub/ASUS/mb/slota/k7m
    Do you have to boot using the DCA floppy for some specific reason?
    (for example to install using the >32GB ide-drive patch; network install
    and no local cdrom drive; El-Torito CDROM boot does not work at all)?
    Or do you have the system already installed by booting from CDROM,
    and you just want to get usable floppy/serial/parallel ports under
    solaris 8? In that case have a look at http://www.tools.de/solaris/via/. I've written a small driver that attaches to the VIA
    686A SouthBridge PCI/ISA device and it re-enables the Super-I/O
    controller on that chip. The Super-I/O chip is disabled due to the
    solaris ACPI bug and is the reason all these on-board devices do
    not work under solaris 8. According to
    http://www.asus.com.tw/products/Motherboard/SlotA/k7m/spec.html, the K7M uses the same SouthBridge chip, so my driver should work for
    this board, too.

  • Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

    Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
    installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
    BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
    FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
    When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
    I re-partitioned disk to extened/journaled standard, etc.
    Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
    But, it has now been in "preparing" mode in Time Machine for HOURS....
    What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
    Are you trying to make issues with External disks, to drive people to iCloud?  That trick ont work in me. I will not reward bad behaviour Apple.
    Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

    Solved by Pondini, on another thread I opened...
    Answer:
    Sounds like either:
    A directory problem on your internal HD.  Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
    Something in OSX may be damaged.  You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that).  See Installing the ''combo'' update and/or Reinstalling OSX.

  • Accessing physical floppy disk drive from Windows 8.1 host machine to Windows XP SP3 hyper-v?

    Hi there!
    Could someone help up me? I just wanted to ask if it's possible for a hyper-v to access a physical "floppy diskette" drive?
    Here's my setup: I have a Windows 8.1 as my host and Windows XP SP3 as the virtual machine. I would need to access the contents of the physical floppy diskette drive from the Windows XP SP3 vm. This is needed, because, currently our customer is still using
    floppy disk drives, to most of their in-house applications. I tried to open Drive A: inside Windows XP SP3 VM while the physical diskette from the Windows 8.1 is inserted. But then again, it cannot directly access the contents. Also, I tried to use "virtual
    floppy drives" and copy the files from the diskette. But for some reason, their applications do not support it. I did check device manager in Windows XP SP3 vm, but i cannot see the "Universal Serial Bus Controllers" option inside the VM.  
    Please help!!! Thank you!
    All the best,
    MS CAMPer

    HI Carey, thanks for this, But this is under System Center Virtual Machine Manager. I already saw this a while ago.
    Anyway, is there a way for Windows XP VM to access a physical floppy diskette drives inserted to Windows 8.1 host machine? I dont intend to use Virtual floppy disks. Only Physical ones.
    Please please. Need your help guys! :( Thank you!

  • External floppy disk drive

    I have an HP F1059C External Floppy Disk Drive by TEAC that came with a (really) old HP laptop. I have some old research saved to floppy disks I need to access.  Is there a cable that will convert my External drive to a USP port on my present  HP laptop with Windows 8?  Do  I need a new driver?
    Thanks 
    Oxford Designer

     Thank you Dean Huffy. Yes, I recall it was an omnibook.  I loved the compactness of the thing.  And it had enough heft one could throw it like a brick at someone's head if they made fun of it.   Your advice alone is worth the $30 and elegant in its simplicty. 
    If you have the patience, I would add another permutation to my situation.   After the Omnibook's monitor went dark the files were tranferred via it's floppy drive to its desktop successor, for which I ordered a redundant floppy drive for that purpose.  There it rested, with some updates, but unbidden for the past five years until the desktop crashed and I replaced it with the present laptop.  I took the two units to my local computer repair person who neatly transferred most if not all the contents of the former to the latter, EXCEPT THAT, when I try to open the one, much coveted file, I get a message "cannot convert password protected documents".  Okay, so had so much regard for the file I put a password on it, but I can't even get to a point where I can enter a password; and following the Windows advice to "Open and Repair" seems to have no impact.  
    The bottom line is, I am most grateful for your advice on how to recover the file as of 2001 from an old back-up floppy , but would be even more grateful if I can recover the file through its 2009 updates now on my harddrive (and perhaps a back-up CD.)
    Thank you, again.
    Hank

  • How to install and configure NI Visa Server without having to install MAX?

    Hi,
    I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
    Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
    Thanks in advance for any help.

    Hello!
    Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
    Allan S.

  • How would i install and configure HS on windows?

    Hello,
    I would like to explore more about installing and configuring HS on windows box (64-bit).
    I have two questions.
    1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
    2)can some provide me more steps to configure it, if it's possible.
    3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways?
    Thanks,
    Steve.

    For 64bit Windows you need to have a 64bit DG4ODBC - DG4ODBC 64bit for Windows was first released with 11.2.
    1)Is there OD4ODBC software avaliable for 64-bit windows? if not 32 - bit software works with 64-bit windows OS and 11G Database which is also 64-bit?
    => No - only 64bit DG4ODBC is supported - so please use DG4ODBC 11.2
    2)can some provide me more steps to configure it, if it's possible.
    Please have a look at this note: How to Configure DG4ODBC (Oracle Database Gateway for ODBC) on 64bit Windows Operating Systems to Connect to Non-Oracle Databases Post Install          [Document 1266572.1]     
    which is available through My Oracle Support portal.
    3) is there any other way to connect ro MS SqlServer from Oracle other than using ODBC/Gateways? The easiest way is a gateway, but you could use a JDBC driver and load the MS SQL Server JDBC driver into the JVM of the Oracle database, then code the connection.

  • Erasing and re-titling a floppy disk using Disk Utility in OS Tiger

    I am trying to erase and re-title a floppy disk using "Disk Utility." I keep getting an error message that "Disk Utility" cannot open the disk.
    I'm using an external FD drive that plugs into the USB port and is recognized without the use of driver software. When the floppy disk icon appears on the desktop, and I select it, the use of "return" and typing in a new name has no effect. The floppy disk icon reappears named "Untitled."
    Any suggestions?

    Is the disk locked? Haven't used a floppy in quite awhile, but do remember that they had a slider that would lock it.

  • I have an imac i5 and have about 50 floppy disks I would love to read.  I found a Sony 2x fdd floppy that connects via usb.  When I connect it, nothing happens.  Amy I just out of luck?

    I have an imac i5 and have about 50 floppy disks I would love to read.  I found a Sony 2x fdd floppy that connects via usb.  When I connect it, nothing happens. The drive does not show on my monitor.  Any suggestions or  my I just out of luck?

    Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Install and configuration on the SharePoint server 2007 issue

    Hi All,
               I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
              I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
    Please check the Edited install.bat file and error log.
    Install.bat
    set _my_datetime=%date% %time%
    @echo on
    echo Begin Installation at %_my_datetime%
    echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    @echo off
    @SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
    @SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
    @SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
    @SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
    @SET SITEURL="http://sharepoint7:80/sites/DCADC"
    @SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
    REM      cd $(ProjectDir)
    %GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
    pushd %TEMPLATEDIR%\features
          Echo Deactivating LiveCycle Connector feature with WSS
          %STSADM% -o deactivatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Deactivating LiveCycle Workflow feature with WSS
          %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
          Echo Uninstalling LiveCycle Connector with WSS
          %STSADM% -o uninstallfeature -filename  LiveCycle\feature.xml -force
          Echo Uninstalling LiveCycle Workflow with WSS
          %STSADM% -o uninstallfeature -name  LiveCycle/Workflow -force
    popd
          Echo Copying source files to WSS \TEMPLATE directory
          xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
          Echo Copying Feature Resource files to WSS 12\Resources directory
          xcopy Resources %RESOURCESDIR% /e /y /i
          Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
          xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
    pushd %TEMPLATEDIR%\features
          Echo Installing LiveCycle Connector  with WSS
          %STSADM% -o installfeature -filename  LiveCycle\feature.xml -force
          Echo Installing LiveCycle Workflow with WSS
          %STSADM% -o installfeature -name  LiveCycle/Workflow -force
          Echo Activating LiveCycle Connector  with WSS
          %STSADM% -o activatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Activating LiveCycle Workflow with WSS
          %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
    popd
          Echo Restarting IIS worker process
          IISRESET
    set _my_datetime=%date% %time%
    @echo on
    echo End Installation at %_my_datetime%
    @echo off
    Error Log
    E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27 
    Begin Installation at Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Deactivating LiveCycle Connector feature with WSS
    Operation completed successfully.
    Deactivating LiveCycle Workflow feature with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Connector with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Workflow with WSS
    Operation completed successfully.
    Copying source files to WSS \TEMPLATE directory
    TEMPLATE\FEATURES\LiveCycle\Elements.xml
    TEMPLATE\FEATURES\LiveCycle\Feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
    TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
    TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
    TEMPLATE\IMAGES\LiveCycle\createPdf.png
    TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
    TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
    TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
    TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
    TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
    TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
    16 File(s) copied
    Copying Feature Resource files to WSS 12\Resources directory
    Resources\AdobeLiveCycleConnectorCore.de-DE.resx
    Resources\AdobeLiveCycleConnectorCore.de.resx
    Resources\AdobeLiveCycleConnectorCore.en-US.resx
    Resources\AdobeLiveCycleConnectorCore.en.resx
    Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
    Resources\AdobeLiveCycleConnectorCore.fr.resx
    Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
    Resources\AdobeLiveCycleConnectorCore.ja.resx
    Resources\AdobeLiveCycleConnectorCore.resx
    9 File(s) copied
    Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
    App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
    App_GlobalResources\AdobeLiveCycleConnector.de.resx
    App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
    App_GlobalResources\AdobeLiveCycleConnector.en.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja.resx
    App_GlobalResources\AdobeLiveCycleConnector.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.resx
    18 File(s) copied
    Installing LiveCycle Connector  with WSS
    Operation completed successfully.
    Installing LiveCycle Workflow with WSS
    Operation completed successfully.
    Activating LiveCycle Connector  with WSS
    Operation completed successfully.
    Activating LiveCycle Workflow with WSS
    Operation completed successfully.
    Restarting IIS worker process
    Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Internet services successfully restarted
    E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29 
    End Installation at Wed 08/22/2012 14:41:00.29
    Waiting...
    Regards,
    Amol Sahare

    This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
    You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

  • How to install and configure Business objects on a local Maschine

    Hi Experts,
    i am a newbi in BO and would like to work with BO.
    The first thing i learned was to install and configure BO on my notebook.
    I downloaded the followings Tools:
    - CR Report 2008
    - Integration Kit
    - Live office 3.1 Upgrade
    - Web Intelligence
    - XCelsius
    By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
    1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
    2. Before installing Query as a webservice i should first install:
        - BusinessObjects XI Release 2 SP2 Enterprise Edition
        - Web Services--> What is that and where could i download it?
        - Tomcat or another supported Web Application and JDK--> where can i download it?
    3. .What is NET 1.1? Where to download it and how to install it?
    Any information or expereince will be very appreciated.
    Thank you in advance for your Input.
    Pat
    Edited by: Gilo on Feb 1, 2009 12:25 AM

    Hi Pat,
                You can get the guides and Installtion guides from this
    http://help.sap.com/businessobject/product_guides/
    You can download the from
    .subscribenet.com
    you can enter the user name and password then you can download the Business Objects software that can be download.
    "By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
    Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
    Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
    Regards
    Prashant

  • INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

    Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
    Below are details of my pc.
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name   ...........-HP
    System Manufacturer    Hewlett-Packard
    System Model    HP ProBook 4530s
    System Type    x64-based PC
    Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
    SMBIOS Version    2.6
    Windows Directory    C:\windows
    System Directory    C:\windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United Kingdom
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    ...........-HP\................
    Time Zone    South Africa Standard Time
    Installed Physical Memory (RAM)    4.00 GB
    Total Physical Memory    3.94 GB
    Available Physical Memory    1.00 GB
    Total Virtual Memory    7.87 GB
    Available Virtual Memory    1.25 GB
    Page File Space    3.94 GB
    Page File    C:\pagefile.sys

    To clarify further....  It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine.  In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows.  If you are using a 64bit OS, you must install the 64bit software.  Again, this would include Forms/Reports, WLS, and JDK

Maybe you are looking for