Installing and Configuring Apache FOP ?

Hello,
I dont quite get when you install and configure Apache FOP whether its talking about Enterprise manager dbconsole, grid control, or Oracle application server?
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html#05
Any have any ideas?
thanks!
Message was edited by:
Mark Griffin

EM for the Application Server

Similar Messages

  • Installing and configuring Apache, PHP, and MySQL [RMx]

    Under the current package scheme, there are a couple of changes to be made.
    - php.ini is now in /etc/php.ini
    - step two in configure php is no longer necessary, they are uncommented by default.
    Otherwise, this is still a perfect wiki.

    This document has been moved to the wiki. I think I did update the php.ini location, but thanks for the tip on those PHP lines being uncommented now.
    http://wiki.archlinux.org/index.php/Apa … nd%20MySQL
    I'm removing the "comment" step now...
    Thanks,
    Dusty

  • Installing and Configuring the Apache HTTP Server Plug-In

    Hi,
    I am using WL10.3 in Linux machine.
    I have an environment where I have a single WL server in a domain that is deployed with the web-application
    And I have another domain where I have two managed servers in a cluster that is deployed with the business.
    Now, I want to configure a Apache HTTP server to make it work as a proxy along with the weblogic.
    In my current scenario, the stand alone server proxies the req to the cluster and that is defined in a jndi.properties.
    Now, what should I do if I want to use the Apache
    I have the following questions:
    1. Forget about my env, generally how can I install and configure Apache HTTP plug-in?
    I see we already having libproxy_61.so file inside /bea/wlserver_10.3/server/plugin/linux/i686
    Do i need to install the patch even then as told in http://www.oracle.com/technology/deploy/security/wls-security/2793.html?
    2. While am adding the lines in httpd.conf ,
    LoadModule weblogic_module modules/mod_wl_22.so
    Should I put ibproxy_61.so instead of mod_wl_22.so in this line?
    3. Just by configuring the proxy, the session replication and load balancing will be ensured?
    4.And for my configuration as stated at the beginning few lines, what can be the best architecture?
    Your help is really appreciated.

    Hi,
    Below blog would give you a clear understanding of the Integrating Apache with Weblogic. All your questions are been answered in the below blog.
    http://www.prasannatech.net/2008/07/integrating-apache-tomcat-weblogic.html
    You can for sure apply the patch provided in CVE-2008-3257).
    Keep posted with your findings and let us know if you need any further clarification.
    Regards,
    Hussain

  • Install and configure report service on Oracle Application Server 10g

    i want to know how to install and configure report service on Oracle Application Server 10g Release 3 (10.1.3.1.0)
    Thanks

    the case is that we developed an ADF Application, so we want to deploy it on the latest version of Oracle Application server.
    our application communicate with Oracle reports (run oracle reports from our Application) as there are no Oracle report products for JEE Application.
    so if there are not report service that can run on Oracle Application Server 10g Release 3 (10.1.3.1.0),
    what is the other choices that oracle supports that can help us in this case ???

  • Install and configuration on the SharePoint server 2007 issue

    Hi All,
               I have Microsoft Sharepoint 2007 on Windows 2003 and I am trying to Integrate Adobe Lifecycle Rights Management Server which is on Windows 2008 R2 server.
              I am trying to Install and configuration on the SharePoint server 2007 but during installation getting error "Failure adding assembly to the cache: Unknown Error"
    Please check the Edited install.bat file and error log.
    Install.bat
    set _my_datetime=%date% %time%
    @echo on
    echo Begin Installation at %_my_datetime%
    echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    @echo off
    @SET GACUTILEXE="C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\gacutil.exe"
    @SET TEMPLATEDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE"
    @SET RESOURCESDIR="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\Resources"
    @SET WEBAPPDIR="C:\Inetpub\wwwroot\wss\VirtualDirectories\80"
    @SET SITEURL="http://sharepoint7:80/sites/DCADC"
    @SET STSADM="C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.EXE"
    REM      cd $(ProjectDir)
    %GACUTILEXE% /nologo /i AdobeLCSharepoint.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleConnector.dll /f
    %GACUTILEXE% /nologo /i AdobeLiveCycleWorkflow.dll /f
    pushd %TEMPLATEDIR%\features
          Echo Deactivating LiveCycle Connector feature with WSS
          %STSADM% -o deactivatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Deactivating LiveCycle Workflow feature with WSS
          %STSADM% -o deactivatefeature -name LiveCycle/Workflow -url %SITEURL% -force
          Echo Uninstalling LiveCycle Connector with WSS
          %STSADM% -o uninstallfeature -filename  LiveCycle\feature.xml -force
          Echo Uninstalling LiveCycle Workflow with WSS
          %STSADM% -o uninstallfeature -name  LiveCycle/Workflow -force
    popd
          Echo Copying source files to WSS \TEMPLATE directory
          xcopy TEMPLATE %TEMPLATEDIR% /e /y /i
          Echo Copying Feature Resource files to WSS 12\Resources directory
          xcopy Resources %RESOURCESDIR% /e /y /i
          Echo Copying Resource files to %WEBAPPDIR%\App_GlobalResources directory
          xcopy App_GlobalResources %WEBAPPDIR%\App_GlobalResources /e /y /i
    pushd %TEMPLATEDIR%\features
          Echo Installing LiveCycle Connector  with WSS
          %STSADM% -o installfeature -filename  LiveCycle\feature.xml -force
          Echo Installing LiveCycle Workflow with WSS
          %STSADM% -o installfeature -name  LiveCycle/Workflow -force
          Echo Activating LiveCycle Connector  with WSS
          %STSADM% -o activatefeature -filename  LiveCycle\feature.xml  -url %SITEURL% -force
          Echo Activating LiveCycle Workflow with WSS
          %STSADM% -o activatefeature -name LiveCycle/Workflow -url %SITEURL% -force
    popd
          Echo Restarting IIS worker process
          IISRESET
    set _my_datetime=%date% %time%
    @echo on
    echo End Installation at %_my_datetime%
    @echo off
    Error Log
    E:\Adobe LiveCycle Connector-2007>set _my_datetime=Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo Begin Installation at Wed 08/22/2012 14:40:28.27 
    Begin Installation at Wed 08/22/2012 14:40:28.27
    E:\Adobe LiveCycle Connector-2007>echo "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    "Customize <VER> <PORT> <SharepointServerNameOrIP> <SiteDirectory> <siteName> in this install.bat . Verify gacutil.exe path."
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Failure adding assembly to the cache: Unknown Error
    Deactivating LiveCycle Connector feature with WSS
    Operation completed successfully.
    Deactivating LiveCycle Workflow feature with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Connector with WSS
    Operation completed successfully.
    Uninstalling LiveCycle Workflow with WSS
    Operation completed successfully.
    Copying source files to WSS \TEMPLATE directory
    TEMPLATE\FEATURES\LiveCycle\Elements.xml
    TEMPLATE\FEATURES\LiveCycle\Feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\feature.xml
    TEMPLATE\FEATURES\LiveCycle\Workflow\workflow.xml
    TEMPLATE\IMAGES\LiveCycle\applyPolicy.png
    TEMPLATE\IMAGES\LiveCycle\applyReaderExtn.png
    TEMPLATE\IMAGES\LiveCycle\createPdf.png
    TEMPLATE\IMAGES\LiveCycle\liveCycle.gif
    TEMPLATE\IMAGES\LiveCycle\pdficon_small.gif
    TEMPLATE\LAYOUTS\LiveCycle\ApplyPolicy.aspx
    TEMPLATE\LAYOUTS\LiveCycle\ApplyReaderExtensions.aspx
    TEMPLATE\LAYOUTS\LiveCycle\GeneratePDF.aspx
    TEMPLATE\LAYOUTS\LiveCycle\InvokeGenericProcess.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LiveCycleSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\LoggingSettings.aspx
    TEMPLATE\LAYOUTS\LiveCycle\Workflow\LCWorkflowSettings.aspx
    16 File(s) copied
    Copying Feature Resource files to WSS 12\Resources directory
    Resources\AdobeLiveCycleConnectorCore.de-DE.resx
    Resources\AdobeLiveCycleConnectorCore.de.resx
    Resources\AdobeLiveCycleConnectorCore.en-US.resx
    Resources\AdobeLiveCycleConnectorCore.en.resx
    Resources\AdobeLiveCycleConnectorCore.fr-FR.resx
    Resources\AdobeLiveCycleConnectorCore.fr.resx
    Resources\AdobeLiveCycleConnectorCore.ja-JP.resx
    Resources\AdobeLiveCycleConnectorCore.ja.resx
    Resources\AdobeLiveCycleConnectorCore.resx
    9 File(s) copied
    Copying Resource files to "C:\Inetpub\wwwroot\wss\VirtualDirectories\80"\App_GlobalResources directory
    App_GlobalResources\AdobeLiveCycleConnector.de-DE.resx
    App_GlobalResources\AdobeLiveCycleConnector.de.resx
    App_GlobalResources\AdobeLiveCycleConnector.en-US.resx
    App_GlobalResources\AdobeLiveCycleConnector.en.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleConnector.fr.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleConnector.ja.resx
    App_GlobalResources\AdobeLiveCycleConnector.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de-DE.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.de.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en-US.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.en.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr-FR.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.fr.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja-JP.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.ja.resx
    App_GlobalResources\AdobeLiveCycleWorkflow.resx
    18 File(s) copied
    Installing LiveCycle Connector  with WSS
    Operation completed successfully.
    Installing LiveCycle Workflow with WSS
    Operation completed successfully.
    Activating LiveCycle Connector  with WSS
    Operation completed successfully.
    Activating LiveCycle Workflow with WSS
    Operation completed successfully.
    Restarting IIS worker process
    Attempting stop...
    Internet services successfully stopped
    Attempting start...
    Internet services successfully restarted
    E:\Adobe LiveCycle Connector-2007>echo End Installation at Wed 08/22/2012 14:41:00.29 
    End Installation at Wed 08/22/2012 14:41:00.29
    Waiting...
    Regards,
    Amol Sahare

    This might be an issue with the gacutil that you are using. I have used the gacutil that comes with Microsoft SDK.
    You can install Microsoft SDK from http://www.microsoft.com/en-us/download/details.aspx?id=3138

  • How to install and configure Business objects on a local Maschine

    Hi Experts,
    i am a newbi in BO and would like to work with BO.
    The first thing i learned was to install and configure BO on my notebook.
    I downloaded the followings Tools:
    - CR Report 2008
    - Integration Kit
    - Live office 3.1 Upgrade
    - Web Intelligence
    - XCelsius
    By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload?
    1. I would like to know which logic to follow toinstall it.Which one should be the firt and which one the last.
    2. Before installing Query as a webservice i should first install:
        - BusinessObjects XI Release 2 SP2 Enterprise Edition
        - Web Services--> What is that and where could i download it?
        - Tomcat or another supported Web Application and JDK--> where can i download it?
    3. .What is NET 1.1? Where to download it and how to install it?
    Any information or expereince will be very appreciated.
    Thank you in advance for your Input.
    Pat
    Edited by: Gilo on Feb 1, 2009 12:25 AM

    Hi Pat,
                You can get the guides and Installtion guides from this
    http://help.sap.com/businessobject/product_guides/
    You can download the from
    .subscribenet.com
    you can enter the user name and password then you can download the Business Objects software that can be download.
    "By trying to download - Query as a Webservice i saw there were with sequences 1-3. Which one should i donwload? "
    Sequence 1-3 you will have to download all the 3 as it can be part 1 part 2 and part 3.
    Tomcat .If you are installing for the first time it will automatically install tomcat and JDK if you are connected to the net while installing Business Objects.
    Regards
    Prashant

  • INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes.

    Hi there, i have an issue installing oracle forms and reports. its throwing this error"INST-07408: Unable to install or configure the product on a 32-bit JVM on a 64-bit machine. Make sure to install and configure the product in supported modes." on step 5. I have jdk 64bit installed, weblogic server was installed successfully but iam getting stuck somehow.
    Below are details of my pc.
    OS Name    Microsoft Windows 7 Professional
    Version    6.1.7601 Service Pack 1 Build 7601
    Other OS Description     Not Available
    OS Manufacturer    Microsoft Corporation
    System Name   ...........-HP
    System Manufacturer    Hewlett-Packard
    System Model    HP ProBook 4530s
    System Type    x64-based PC
    Processor    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date    Hewlett-Packard 68SRR Ver. F.23, 09/03/2012
    SMBIOS Version    2.6
    Windows Directory    C:\windows
    System Directory    C:\windows\system32
    Boot Device    \Device\HarddiskVolume1
    Locale    United Kingdom
    Hardware Abstraction Layer    Version = "6.1.7601.17514"
    User Name    ...........-HP\................
    Time Zone    South Africa Standard Time
    Installed Physical Memory (RAM)    4.00 GB
    Total Physical Memory    3.94 GB
    Available Physical Memory    1.00 GB
    Total Virtual Memory    7.87 GB
    Available Virtual Memory    1.25 GB
    Page File Space    3.94 GB
    Page File    C:\pagefile.sys

    To clarify further....  It is important to note that Forms/Repors 11.1.2.x software (including WLS and JDK) must be of the same archetecture as the machine.  In other words, you cannot use the 32bit Forms/Reports 11.1.2 software on 64bit Windows.  If you are using a 64bit OS, you must install the 64bit software.  Again, this would include Forms/Reports, WLS, and JDK

  • What are the prerequisites to install and configure Oracle Coherence 3.4

    What are the prerequisites to install and configure an Oracle Coherence (3.4 Grid version) on RHEL5.0 system?
    I want to make an Oracle Coherence Gid Data system for testing purpose using 3 machines.
    What kind of network configuration is OK?
    What software should be installed in advance?
    Thank you

    Hi,
    I would read through the Testing and Tuning section of the following page.
    http://coherence.oracle.com/display/COH34UG/Usage+(Full)
    Even though you are not about to go into production I think the Production Checklist has some very useful information.
    http://coherence.oracle.com/display/COH34UG/Production+Checklist
    -Dave

  • [Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

    As we all know,
    the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
    Essentials Experience role in Server Manager or via Windows PowerShell.
    In this article, we introduce the steps to install and configure Windows
    Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
    Before installing the Windows Server Essentials Experience Role, please use
    Get-WindowsFeature
    PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
    Figure 1.
    Part 1: Install Windows Server Essentials Experience role locally
    Add Windows Server Essentials Experience role
    Run Windows PowerShell as administrator, then type
    Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
    Figure 2.
    Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
    (Figure 3)
    Figure 3.
      2. Configure Windows Server Essentials Experience role
    (1)  In an existing domain environment
    Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
    Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
    Figure 4.
    After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
    Server Essentials:
    Start-WssConfigurationService –Credential <Your Credential>
    Note: The type of
    Your Credential should be as: Domain-Name\Domain-User-Account.
    You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
    Figure 5.
    Next, you can type the password for the domain account. (Figure 6)
    Figure 6.
    After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
    Figure 7.
    By the way, you can use
    Get-WssConfigurationStatus
    PowerShell cmdlet to
    get the status of the configuration of Windows Server Essentials. Specify the
    ShowProgress parameter to view a progress indicator. (Figure 8)
    Figure 8.
    (2) In a non-domain environment
    Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
    Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
    Figure 9.
    After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
    After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
    After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
    Figure 12.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Part 2: Install and configure Windows Server Essentials Experience role remotely
    In an existing domain environment
    In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
    Add-WindowsFeature -Name ServerEssentialsRole
    -ComputerName xxx -Credential DomainName\DomainAccount
    Figure 13.
    After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
    Figure 14.
    After the installation completes, it will return the result as below:
    Figure 15.
    Next, please use the
    Enter-PSSession
    cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
    Enter-PSSession –ComputerName
    xxx –Credential DomainName\DomainAccount (Figure 16)
    Figure 16.
    Then, please configure Server Essentials Role via
    Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
    Figure 17.
    After your credential is accepted, it will update and prepare your server. (Figure 18)
    Figure 18.
    After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
    Figure 19.
    2. In a non-domain environment
    In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
    below:
    Sevrer1: 192.168.1.54
    Server2: 192.168.1.53
    Run
    Enable-PSRemoting –Force on Server1. (Figure 20)
    Figure 20.
    Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
    to
    add the TrustedHosts entry:
    Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
    (Figure 21)
    Figure 21.
    Next, we can use
    Enter-PSSession
    cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
    Figure 22.
    After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
    Figure 23.
    From figure 24, we can see that the installation is completed.
    Figure 24.
    Then you can use
    Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
    The figure below shows the status of Windows Server Essentials.
    Figure
    25.
    Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
    Figure 26.
    More information:
    [Forum
    FAQ] Introduce Windows Powershell Remoting
    Windows Server Essentials Setup Cmdlets
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • How to install and configure configure IGS for J2EE server 700

    Hi,
    Please help me in installing and configuring IGS for J2EE server700 as i need it to run Business Graphics for my Web DynPro application. Earlier i had installed J2EE server 640 and i didnt have to do any separate installation for IGS. I just had to configure the IGS URL from Visual Admin. But i can't find any igswd.exe running on my J2EE700 engine.
    Please let me know the procedure for this.
    Thanks an Regards,
    Smriti.

    Hi,
    Check the below link,
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/17/86c039c7811f11e10000000a114084/frameset.htm">About IGS Configuration and Adminisatration</a>
    Regards,
    Suresh.T

  • How to install and configure SNMP through a script(shell script/power shell/python)

    Hi all,
    I need a script  so that once it is run on windows 2012 server r2 ,snmp should be installed and configured automatically ,giving minimum user inputs.Things like snmp server ip,community string shouls be configured.
    SNMP services should be up and running with the script

    Hi,
    Please check if you can use
    Install-WindowsFeature PowerShell command to enable SNMP. Meanwhile, please also refer to following article and check if can help you.
    How
    to Install SNMP Remotely
    However, based on your description, the issue seems to be more related to script. I suggest that you should
    post it in
    Windows PowerShell forum or
    Official Scripting Guys forum. I believe we will get a better assistance there.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • How to install and configure ASM on Red Hat Linux 6.4

    Hi Team,
    How do you install and configure ASM on Red Hat Linux 6.4?
    Thank you in advance.
    Bee

    Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

  • How to install and configure smtp on iis 7 on windows 7

    how to install and configure smtp on iis 7 on windows 7?
    Thanks!

    Here is an article that you may find useful http://eriglen.blogspot.com/2013/01/step-by-step-configuring-automatic-storage-management-on-standalone-server-with-oracle-enterprise-linux-and-oracle-11g-R2-using-external-storage-managed-by-openfiler.html

  • How to install and configure Eclipse???

    Can any one guide me how to install and configure Eclipse to use it with jdk 1.5??

    how to install eclipse?
    you don't need to install eclipse just extract it to a specific path...
    install j2se 1.5 then eclipse will automatically detect it...

Maybe you are looking for

  • BPF in Action pane not showing

    Hi experts, We created bpf in BPC7.5ms SP5 and our client is using 32bit MS office 2007 some using MS 2010 32bit., When we tried to click the link in the bpf to open a template. the template usually opens. but the the problem is that the bpf menu in

  • Conversion of smartform output to DOC format

    Hi, I have a requirement to convert Smartform output to DOC format. Could anyone provide me any direction for this? SS

  • Scenario:  client is a sub-contractor

    hello, friends. when we consign a raw material or component to a vendor for a project or production, and the output comes back to us as finished goods, this would be a sub-contracting scenario.  the lead module here would be Materials Management. but

  • I can seem to get into making a book on iphotos

    Hello everyone was wondering if anyone know why I can"t buy a book on my Iphotos. I can't even regestir to buy. thanks

  • Opening external SWF in new window!!!

    hi guys i have a flash file with a button in it. when i click this button i want another movie i have of a bouncing ball to open up just like you would test/view/preview a normal flash movie but i dont know how? can anyone help out i can get it so it