Installing and configuring microsoft sharepoint server 2013

Could you please advise where can I get this book "installing and configuring microsoft sharepoint server 2013"? Thanks for your help.

There is a free ebook here:
http://www.microsoft.com/en-us/download/details.aspx?id=30384
It's also the title of a section of technet but that's not available in printed format as far as i know.
http://technet.microsoft.com/en-us/library/cc262957.aspx

Similar Messages

How to use Digital Signature and PKI in SharePoint Server 2013

Dear Expert,
My company will plan to use Digital Signature and PKI document in SharEPoint Server 2013.
Can you guide me what's the concept and how to implement and develop?
Please suggestion.
BR,

Hi BR,
Based on your description, my understanding is that you want to use Digital Signature and PKI in SharePoint Server 2013.
You can use digital signatures in forms ,then use these forms in you SharePoint site.
In InfoPath form ,you can change the form to allow signature here: File>Info>Advanced form options >Digital Signatures .You can choose to sign the whole form or a field .
https://social.technet.microsoft.com/Forums/en-US/0ed54d57-d67d-41cd-bd1b-9e5a4be10d0c/use-of-digital-signature-in-sharepoint-2010?forum=sharepointcustomizationprevious
Or you can use any tools such as the ADSS Connector for SharePoint which allows enterprise users to "click and sign" on a document in SharePoint.
http://www.ascertia.com/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

How to install and configure the SQL Server

Hi All,
We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
Kind Rgds,
Steve

Hi,
Try this solution:
The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
Below are some important parts that you should pay attention to during the Installation process.
Resolution
Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
Rgds,

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

How to install and configure NI Visa Server without having to install MAX?

Hi,
I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
Thanks in advance for any help.

Hello!
Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
Allan S.

How to install and configure a boradcasting server ?

I want to install and configure a broadcasting service.
- Where can I find the service (software) ?
- What kind OS is needed ?
- is it possible to install on a PC ?
- docs ???
Please Help needed
Kind regards

HI Michel Hellmann ,
Please check:
[Information Broadcasting Part 1 u2013 System Parameter Setting|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-1-system.html]
[Information Broadcasting-Part 2 -System Settings|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-2-system.html]
[Information Broadcasting Part 3 u2013 Scheduling the First Report|http://sapbwneelam.blogspot.com/2008/09/information-broadcasting-part-3.html]
[How To... Troubleshoot Information Broadcasting (BEx Workbooks)|http://sapbwneelam.blogspot.com/2008/09/how-to-troubleshoot-information.html]
Hope it Helps
Srini

Microsoft SharePoint Server 2013 encountered an error during setup

(the html editor over here is a pain you know where - not even bold text is working...)
Every time I try to install SP 2013 SP1 on my WS 2012 R2 Update virtual machine the installer dies.
NOTE: I can reproduce this any time. Both the SharePoint 2013 (including SP1) .iso as well as the WS 2012 R2 (including Update) .iso are fresh copies out of the MSDN library.
The installation fails where the installer tries to install the binaries. No configuration wizard yet. I made sure all the prerequisites are there. The PreRequisitesInstaller.exe reboots the virtual machine several times (twice) and then it is all set.
PS C:\Users\bsom> add-windowsfeature net-wcf-http-activation45, net-wcf-tcp-activation45,net-wcf-pipe-activation45
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\rsom> Add-WindowsFeature Net-Framework-Features,Web-Server,Web-WebServer,Web-Common-Http,Web-Static-Content,
Web-Default-Doc,Web-Dir-Browsing,Web-Http-Errors,Web-App-Dev,Web-Asp-Net,Web-Net-Ext,Web-ISAPI-Ext,Web-ISAPI-Filter,Web-
Health,Web-Http-Logging,Web-Log-Libraries,Web-Request-Monitor,Web-Http-Tracing,Web-Security,Web-Basic-Auth,Web-Windows-A
uth,Web-Filtering,Web-Digest-Auth,Web-Performance,Web-Stat-Compression,Web-Dyn-Compression,Web-Mgmt-Tools,Web-Mgmt-Conso
le,Web-Mgmt-Compat,Web-Metabase,Application-Server,AS-Web-Support,AS-TCP-Port-Sharing,AS-WAS-Support, AS-HTTP-Activation
,AS-TCP-Activation,AS-Named-Pipes,AS-Net-Framework,WAS,WAS-Process-Model,WAS-NET-Environment,WAS-Config-APIs,Web-Lgcy-Sc
ripting,Windows-Identity-Foundation,Server-Media-Foundation,Xps-Viewer
Success Restart Needed Exit Code Feature Result
True No NoChangeNeeded {}
PS C:\Users\bsom>
UPDATE: I had a quick look at %Temp%\SharePoint Server Setup(20140513...).log
2014/05/13 20:30:40:858::[2344] Log level changed from: Verbose to: Standard
2014/05/13 20:30:40:858::[2344] Error: Failed to install product: D:\global\oserver.MSI ErrorCode: 1603(0x643).
2014/05/13 20:30:40:858::[2344] Log level changed from: Standard to: Verbose
2014/05/13 20:30:40:858::[2344] Rolling back chain
Any ideas?
UPDATE: Installing office prior to the sharepoint installation had no effect (solution was suggested here).
UPDATE: Installing all windows updates (for Windows Server and Office client applications) didn't help either... same error.
UPDATE: I made sure my windows server and sharepoint server images are exactly those you can currently find on MSDN. SHA1 hashes match.

I just did a Server 2012 R2 and SP 2013 w/ SP1 install the other night on Hyper-V running on 8.1 Pro without issues. ISO was from MSDN.
Have you run a crc (or md5, forget what is used) to validate the ISO matches what MSDN says it should be?
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How does WSUS work when an SCCM 2012 R2 server is newly installed? Should WSUS be installed and configured on same server?

Let me clarify.
We had a functional WSUS server delivering our updates to ours workstations. The location of the WSUS server was pushed out by Group policies.
Later, an SCCM 2012 R2 installation was installed. The original WSUS server was removed. Now WSUS type services appear to be broken.
I tried to start WSUS on the SCCM 2012 R2 server and it does not start. (I assume its not configured).
I want to get WSUS running again but am not sure how to do this safely in conjunction with our SCCM 2012 R2 installation. Do I just reinstall WSUS on the SCCM server and configure? Or is there other preferred methods?
I was not involved in SCCM's installation, so I do not know what was done.
Geoff.

Update functionality is provided via the Software Update Point
https://technet.microsoft.com/en-us/library/gg712312.aspx
... which requires WSUS to be installed - it basically takes control of WSUS.
Any existing group policies defining WSUS servers should be removed so that the SCCM client (which I assume is installed on computers already) can configure accordingly. Otherwise you will have group policy and SCCM client over writing one another to configure
the update server

Installing and configuring additional Edge Server role[2007] in AD site

Hello Guys,
We are planning to migrate our edge server to a new hardware. so my plan is to install new edge server and configure in a new hardware first and then decommisioing the old one.
Currently we have four servers deployed as below.
Edge Server - INEDGE001
HUB/CAS - INHUBCAS002 & INHUBCAS003
Mailbox - INMBOX004
Kindly provide the steps for this edge server harware migration.
~Karthick

Hi,
Based on my research, here are the steps about moving Edge server to a new hardware:
1.Capture all of your Edge Transport server configuration data
2.Shut down the existing Exchange 2007 server
3.Reset the computer account for the existing Exchange 2007 server
4.For drives that contained Exchange 2007 data, configure drive letters on the new server to map to or match the configuration of the old server.
5.Setup new Exchange 2007
6.When the Setup program has completed, install the Exchange 2007 service pack that was installed on the existing server.
7.Install any Exchange 2007 post-service pack hotfixes that were installed on the existing server.
8.Copy the ImportEdgeConfig.ps1 script to the root folder of your user profile on the server that you are restoring.
9.Validate the configuration file, and create an answer file that will provide server-specific information when the file is imported
10.Open the answer file, and modify any settings that are invalid for the server.
11.Import the Edge Transport server configuration by using the ImportEdgeConfig.ps1 script.
12.Run the EdgeSync process to replicate Active Directory information to Active Directory Application Mode (ADAM) and perform regularly scheduled synchronization.
For more detail inforamtion, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb332339(v=exchg.80).aspx
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Step by Step of how to Install and configure the Web Server Core 2008 R2

I encoutred a couple of problems installing a Web Server Core 2008 R2 edition including the remote connection and for people who are encountring the error :
"The WinRM client cannot complete the operation within the time specified" or the error : " Could not connect to the specified
computer. Details: Unable to connect to the remote server " I think those couple of video will be helpfull,
so I decided to record and share this experience with you by producing the server core from A to Z to avoid the headache that I encountred
during my experience. The lab environment is vmware but you can use hyper v or even physical lab if you want as the steps are the
same
http://www.youtube.com/playlist?list=PLzayUN5B2cXMoyziV4oUs94P6EZT6QVmc
watch?v=5z1NiWUJdGU Wipe generation
watch?v=Q3BoLkWWAC4 hard disk preparation
watch?v=lOPvy-cn0Uk server core installation
watch?v=gTnOUJfRkDg configure the web server
watch?v=0ofvknXMNsc install .net framework in the webserver
watch?v=K4ADBzZeM6E install the web server role
watch?v=oGHC0sbe17Y remote control the server
watch?v=SpzAsRkjV40 continue the remote configuration
watch?v=XjPD8U_y29I Create and alias for the web server
watch?v=Pim1T6z6DJM Configure a Win 7 machine to control
Enjoy the vids
The complexity resides in the simplicity Follow me at: http://smartssolutions.blogspot.com

Hi MASNSN,
Thanks for your sharing =)

Possible to install and configure adobe media server with existing apache

Hi All,
I am wondering if you know whether or not there would be an issue installing AMS Pro on a server that is already running a Moodle installation (2.4) with Apache 2.2?
If I opt to install AMS without installing apache, can I manually configure the exiting apache to enable iOS support, etc?
Any information is most appreciated!
Cheers,
G

You better post this question in the correct forum: Adobe Media Server maybe the moderator can move it.

Installing and Configuring Microsoft IIS plugin for weblogic server

Hi guys,
I want to navigate from "a page in website hosted on IIS" to "a page in application hosted on weblogic". I found out that there is a plugin for Microsoft IIS that can proxy requests to weblogic server. The documentation of the plugin can be found on the following address:
Webserver plugin
I want to know about the configuration of machines. Can IIS and weblogic be on the same machine or different machines???? Where i have to install the plugin????
I am not able to find this in the above documentation.
My environment is:
1) Weblogic Server 10.3.5 installed on windows server 2012.
2) Forms and Reports 11gR2 are installed on this weblogic server
3) Apex Listener is also installed on the weblogic which communicates with a different db server.
4) I also want to install JDeveloper and ADF on the same weblogic server and call applications developed in ADF (like jsp page) from Microsoft IIS website.
Please help me and give me suggestions.
Regards,
Waqas

There is a free ebook here:
http://www.microsoft.com/en-us/download/details.aspx?id=30384
It's also the title of a section of technet but that's not available in printed format as far as i know.
http://technet.microsoft.com/en-us/library/cc262957.aspx

Installing and Configuring Oracle WebLogic Server 11g

Hi, I have a question about the installation of Oracle WebLogic Server 11g (10.3.5) high availability, there is some documentation of best practices on this issue.
Thanks

http://download.oracle.com/docs/cd/E21764_01/web.1111/e13709/toc.htm

Schedule SharePoint Server 2013 discoveries along with SharePoint Foundation 2013 discoveries

Hi
So I'm trying to add the SharePoint Server discoveries in SCOM 2012 - pasted the code straight of the MS guide into the config file:
    <Workflow Id="MOSSInstallation.Discovery;WACInstallation.Discovery;SearchExpressInstallation.Discovery;SearchStandardInstallation.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery"
Times="1" />
    <Workflow Id="SPService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
    <Workflow Id="SPSharedService.Discovery" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
    <Workflow Id="SPSharedService.Discovery.WAC" MP="Microsoft.SharePoint.Server.2013.Discovery" Type="Discovery" Times="4" />
However when I run the "Configure" Task I get the following error: (NOTE - I discovered that the Dir "Monitoring Host Temporary Files 28803\2522979" does not even exist - )
The Event Policy for
the process started at 8:13:26 AM has detected errors in the output. The
'StdErr' policy expression:
.+
matched the
following output:
Exception calling
"GetDiscovery" with "1" argument(s): "An object of
class ManagementPackDiscovery with ID fedca251-56d5-be00-d6af-9cae645d6f36 was
not found."
Failed to find
workflows WSSInstallation.Discovery in Microsoft.SharePoint.Foundation.Library
Command executed:
"C:\Windows\system32\cmd.exe" /c powershell.exe -NoLogo -NoProfile
-Noninteractive "$ep = get-executionpolicy; if ($ep -gt 'RemoteSigned')
{set-executionpolicy remotesigned} & '"E:\Program Files\System Center
2012\Operations Manager\Server\Health Service State\Monitoring Host Temporary
Files 28803\2522979\AdminTask.ps1"'
'Microsoft.SharePoint.Foundation.Library.mp.config'"
Working Directory:
C:\Program Files\System Center Management Packs\
One or more
workflows were affected by this.
Workflow name:
Microsoft.SharePoint.ConfigSharePoint
Instance name:
Microsoft SharePoint Farm Group
Instance ID:
{6CB0A80D-D833-26EA-13C1-0CA48A57F5E2}
Management group:
Error Code:
-2130771918 (Unknown error (0x80ff0032)).
If anyone has any ideas that would be great -
J

Hello Jon,
Thank you for your question.
We are currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Install and configuring JDBC Driver in SAP Java stack

Hi Experts,
We are fetching data from GRC to BIW, for this we are using UD Connect in biw.
For this we need to configure and installed the JDBC Connectors.
Please suggest how to go about this.
Thanks,
Vijay

Hi
Check this SAP Notes
1347514 - How to setup and configure the webi/deski JDBC connection for the Microsoft SQL Server 2005 and Oracle 9i&10g Database
1602614 - How To Install And Configure Microsoft SQL JDBC Drivers
831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 / PI 7.3 JDBC Adapter
Check the SCN blog
Michal's PI tips: JDBC/JMS driver deployment - now more forceMode=true
Configuring the JDBC Adapter - Advanced Adapter Engine - SAP Library
Regards
Ram

Installing and configuring microsoft sharepoint server 2013

Similar Messages

Maybe you are looking for