Installing and now updating Acrobat Pro XI onto my Mac OS 10.1 has caused me no end of grief.

The iMac is very new, and now has Mavericks installed.  The Acrobat XI came via a download.  Error message 1301 when trying to update Acrobat.
Any suggestions?

See my answere to your post in the Mt. Lion forum.

Similar Messages

  • I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report.  How do I get it to stop crashing.

    I just installed CS 6 and now my Acrobat Pro is crashing. I marked several spots to redact and when I applied the redaction, it crashed and produced a report.  How do I get it to stop crashing? I am on OS 10.9.4

    Report the problem to Adobe Acrobat Support along with sample PDFs and detailed description of the steps you perform.

  • Updating Acrobat Pro 9 to new Mac

    I have an existing version of Acrobat Pro ( (version 10.1.8) running on my old MacBook Pro (running OSX 10.6.8)
    How do I transfer this to my new MacBook Air (running 10.7.4)?

    1. Obtain all of the following
    - original install media
    - original serial number
    - if an upgrade, serial number of the OLDER version of Acrobat
    2. Install on new system
    3. If install says too many registrations used, contact Adobe to have this resolved.

  • FrameMaker 8.0p277 and printing to Acrobat Pro 8 & 9

    All this year (2009) I've been working on several contract documents using FrameMaker's conditional text facility.
    FrameMaker is 8.0p277 and the OS is Windows XP Pro SP3.
    In May the old workstation became cantankerous so I updated to a new HP xw4600 with a Quad Core, 4GB ram, and 2 x 250GB SATA disks. Cool!
    I applied all the MS updates and then treated myself to a clean install of Adobe Design Premium CS4, then installed and updated FrameMaker 8.0 (without the PDF Maker). The Adobe Acrobat Professional 9.0 in CS4 was patched to 9.1.2.
    If I open a document in InDesign CS4 and print it to the 'Adobe PDF' printer everything works just fine. Same for Illustrator CS4.
    But FrameMaker fails with this message:
    ... followed by:
    I have also attached the most recent FrameLog fiole...
    Howsomever, if I print the same document to my HP laserjet 4300dtn (or the laserjet 5200 or the FujiXerox DocuPrint 2100) it works just fine. So I assume the document itself is OK.
    If I select the printer to be one of the 3 above and then print to file (and create a .PS file), and then open it in Distiller 9.1.2 it produces a perfect .PDF file (shades of Acrobat 3 and the watched folders here!). But, if I select AdobePDF printer as my output device before generating the .PS file, Distiller reports parsing errors and does not produce output.
    With a doffed hat to Arnis and Dov I refrained from trying 'save to PDF'
    This looks like a corrupt printer driver...
    After talking to Adobe Support (ID 121 702 309) I have tried each of the following (and then re-run my testing cycle as outlined above):
    Running the 'Repair Acrobat Installation' process from Acrobat Pro 9.1.2.
    Setting Acrobat PDF as my default printer (strong whiff of "eyes of a bat and wings of a newt" about THAT suggestion).
    Un-installed and then reinstalled Acrobat Pro 9.1.2.
    Un-installed and reinstalled FrameMaker 8.0p277.
    Un-installed and then reinstalled Acrobat Pro 8.1.4.
    Un-installed and reinstalled FrameMaker 8.0p277.
    Sworn loudly.
    Anyone have some ideas / fixes / incantations???

    Hi Laurence,
    If you can produce PDFs from the AdoebPDF via ID and AI by printing, then I'd suspect that the driver is probably ok. (Note: from ID and AI, it is better to SaveAs PDF, since these have their own internal PDF generation capabilities.)
    Also, with FM8, if you're making interactive PDFs (i.e. not for press), then it is ok to do the SaveAsPDF route, since FM has some post-processing modules that kick in to clean-up the .tps file prior to handing it over to Distiller. So, the process is no longer is identical to printing to file and distilling.
    On the FM side, make sure that the tagged PDF setting is turned off in your PDF setup and have the setting for generating named destinations for all paragraphs enabled.
    You also might want to download Sundorne's SetPrint ( http://www.sundorne.com/FrameMaker/Freeware/setPrint.htm  ) utility to ensure that you always have the same printer instance (AdobePDF) enabled when you start FM.
    Have you also applied the MS hotfix for the PDF font issues? Details are available here: http://blogs.adobe.com/techcomm/2008/07/hotfix_for_framemaker_1.html
    Last desperation move would be to create a new custom PDF printer instance using the Distller PPD and a copy of the AdobePS installer.

  • Print to File Acrobat Pro X for OS/Mac

    Opened a file and edited within Acrobat Pro X for OS/Mac.
    I added stamps and text boxes.
    Within Windows computer I would go to print, Adobe File.
    When I do the same with in Mac, it read "Saving a PDF file when printing is not supported. Instead, choose File > Save."
    When I follow this procedure, the text boxes and stamps are editable.
    I want to save / print the file, so file is "locked" meaning text boxes and stamps are not editable.
    How is this done???
    See video http://screencast.com/t/y6vXU2xQ1

    A better approach is to flatten the flatten the pages, which converts the comment annotation appearances to regular page contents. You can do this with the following JavaScript statement executed in the interactive JavaScript console (command+J):
    // Flatten all pages
    flattenPages()
    Even better is the following JavaScript-based utility: http://www.uvsar.com/projects/acrobat/flattener/

  • Recently installed Creative Suite 6 and am using Acrobat Pro.  Suddenly it crashes and now it won't start.  I installed the current update but still not.  This happened before, in 2012, and was finally fixed.  what do I do?  Duncan

    Hi all,
    My recently installed (Windows 8.1) Acrobat Pro (part of CS6) suddenly stopped working - now it won't start.
    This happened on Windows 7 in 2012 and was eventually fixed.
    Any advice on what I should do?  [I can't find where to post a question to the adobe help people]
    - Duncan

    Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
    Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
    Thanks
    Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
    Message was edited by: Euain_ *add-on*

  • Updated Acrobat Pro Xl and now won't open or recognize Acrobat docs. Help?

    Just updated Acrobat Pro Xl and now Acrobat will not open or recognize Acrobat docs. Help?

    Hi tetvet,
    Which OS are you using?
    Did this issue occur after you updated to 11.0.7?
    Did you try repairing Acrobat and check?
    Regards,
    Rave

  • Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?

    Can I load Acrobat Pro 6 onto Windows 7 and upgrade to Acrobat Pro 9?  My former PC ran on Windows XP and this new PC runs on Windows 7.  I don't want to shell out another $449 when Acrobat Pro 9 worked fine for me.

    You might be able to install Acrobat 6 for this purpose, but you probably won't have to. When you install Acrobat 9 Upgrade it should (if I remember right) ask for the serial number of your "qualifying" product and at that point you put in the Acrobat 6 serial.

  • I am having trouble updating Acrobat Pro 11.0 to 11.0.01.  The install hangs writing to the registry

    I am having trouble updating Acrobat Pro 11.0 to 11.0.01.  The install gets to the writing to the registry screen and hangs.  Help please.

    if you're on a mac, try a direct download and install:
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Macintosh
    if windows:
    http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows

  • Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Have installed and uninstalled Adobe Acrobat XI Pro on my Dell desktop running Windows 7 Professional. Each time I try to open a PDF file, I receive ERROR: 16 message. Would appreciate any suggestions. Thanks.

    Hi Doug Talbott,
    Please refer to the page associated with this link (Configuration error 16 | CC, CS) and follow the procedure detailed for Windows 7 and let me know if your issue gets resolved.
    Regards,
    Rahul Tyagi

  • Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

    downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

    Let me give you a slightly different perspective than everyone else here.  You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network.  That's bad.  Very bad, for you, unless you absolutely trust everyone who lives within range of this network.  So stop doing it.
    As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information.  There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot.  Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

  • I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    I recently installed Acrobat Pro X on my Mac. I initially accepted the terms of agreement, but then every few seconds the same prompted window for the terms of agreement keeps popping up. Can anyone explain why this is happening, and how to resolve?

    Have you tried reinstalling the original drive? Same symptoms with it?

  • HT201210 Itunes update failed to install and now Itunes  won't run

    Itunes update failed to install and now Itunes  won't run

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I have purchased Final Cut Pro for my imac and now want to put it onto my macbook air so I can use it when away from my desk. How can I do this

    I took away my backup disk with me so just took it from there excellent. I am back home at present working on my imac. When I go to use my macbook air on these projects (when away on boat) is it easiest to simply copy the Project and Events folders in total from my imac onto the other machine and do the same upon my return in reverse? I don't use icloud

  • Can't update Acrobat Pro 9.50 to 9.5.1

    Tried updating Acrobat Pro 9.5.0. to 9.5.1 through auto update and downloading the update. Both give an error to reinstall the app because something has changed since the last update. Something to do with plugins. Tried to repair Acrobat installation and remove Safari plugin also. Both don't work.
    At this point I don't want to re-install Acrobat 9. I get the feeling i'm going to have more problems. Also why would I have to reinstall the program? What is that all about? This has happened before while trying to update a version and I get the failure and reinstall. Anyone have any suggestions.

    You could try creating a new account using the instructions here http://kb2.adobe.com/cps/404/kb404927.html. Update Acrobat from the new account and see if the patching works now.
    Also, could you please provide the log files for the failing patch. To obtain the log , follow the following steps:
    1.  Clear the contents of /user/library/adobe/logs folder
    2. Open Console, located in the  Applications- > Utilities folder.
    3. Update Acrobat to generate the error message.
    4. Check the console for error messages and save console log file
    5. Go to /user/library/adobe/logs and share the patch log file

Maybe you are looking for