Installing and upgrading errors

I tried to upgrade iTunes and it came up with an error. I then tried downloading the installer and reinstalling. It gave me this error:
Could not open key: HKEYLOCALMACHINE/software/classes/interface/{915DA835-02FE-4953-92FA-624BDF5D85AB}/ProxyS tubClsid. Verify that you have sufficient to that key, or contact your support personnal.
Any ideas anyone....anyone having the same problem.
Thanks in advance

What a shame.
There is a general registry permission repair script available:
http://blogs.msdn.com/astebner/archive/2006/09/04/739820.aspx
But it is not straight forward, which will see if you take a look. So before trying that, it's worth looking at the permissions for the problem key.
Open regedit - you can type regedit into the search box to find it.
Then highlight HKEYLOCALMACHINE and then search for:
915DA835-02FE-4953-92FA-624BDF5D85AB
That should take you to the key you mentioned in your first post.
Right click on the key and select permissions.
Administrators and SYSTEM should both have full control.
There are also some other permissions for users and creator_owner.
Is that what you have?

Similar Messages

  • TA38482 I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again.

    I have an other kind of error occuring in my Itunes program: "unknown error has occurred (-42110) what can I do!!!!! I have uninstall the program and re-installed and the error appears again, and again. Itunes still works, but every time I open it...the error shows up.

    If your iTunes is up to date, remove the SC Info folder.

  • Over the years I have installed and upgraded Photoshop and Lightroom

    Over the years I have installed and upgraded Photoshop and Lightroom, but unfortunately my hard drive crashed and I was wondering how I could reinstall them without the apps?

    Are you saying you visited the My Account link at Adobe.com, per Curt's suggestion, and they don't have your serial number info on file, and you don't have your original media or serial number info?
    If that's truly the case, get out your credit card because you're basically out of luck.  It's really no one's responsibility but yours to manage your purchase information.
    If your software loss was substantial, monetarily, you might call your insurance company.  I have no idea whether they pay under those kinds of circumstances, but it's worth a check.  But most folks have pretty high deductables on their homeowners' policies.
    If you DO have your serial number, there are ways to get most older versions of Adobe Creative Suite software from Adobe's web site.
    -Noel

  • Information: EM 12c Install and Upgrade documents and recordings

    Oracle Enterprise Manager Cloud Control 12c home page
    http://www.oracle.com/technetwork/oem/index.html
    Enterprise Manager 12c live and recorded webcasts (scroll down to see Install, upgrade, agent deployment webcast)
    http://www.oracle.com/technology/products/oem/events/webcasts_index.html
    Enterprise Manager 12c Screenwatches
    http://www.oracle.com/technetwork/oem/grid-control/webcasts-index-090211.html
    EM 12.1 Install and Upgrade guide avaliable:
    http://download.oracle.com/docs/cd/E24628_01/index.htm
    Installation and Upgrade collateral page(PPT,Recorded demo,Whitepapers) on OTN:
    http://www.oracle.com/technetwork/oem/install-upgrade-496677.html
    Download the EM 12.1 binaries from
    http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
    OTN EM 12.1 Upgrade page to get the required Pre-upgarde console patch and other binaries
    http://www.oracle.com/technetwork/oem/grid-control/downloads/oem-upgrade-console-502238.html
    Refer to Release Schedule of Enterprise Manager Releases Doc:793512.1 from https://support.oracle.com

    Oracle Enterprise Manager Cloud Control 12c home page
    http://www.oracle.com/technetwork/oem/index.html
    Enterprise Manager 12c live and recorded webcasts (scroll down to see Install, upgrade, agent deployment webcast)
    http://www.oracle.com/technology/products/oem/events/webcasts_index.html
    Enterprise Manager 12c Screenwatches
    http://www.oracle.com/technetwork/oem/grid-control/webcasts-index-090211.html
    EM 12.1 Install and Upgrade guide avaliable:
    http://download.oracle.com/docs/cd/E24628_01/index.htm
    Installation and Upgrade collateral page(PPT,Recorded demo,Whitepapers) on OTN:
    http://www.oracle.com/technetwork/oem/install-upgrade-496677.html
    Download the EM 12.1 binaries from
    http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html
    OTN EM 12.1 Upgrade page to get the required Pre-upgarde console patch and other binaries
    http://www.oracle.com/technetwork/oem/grid-control/downloads/oem-upgrade-console-502238.html
    Refer to Release Schedule of Enterprise Manager Releases Doc:793512.1 from https://support.oracle.com

  • HT1222 IOS 6 not install and send error massege to me

    I download ios6 for my device iPhone 4 and then order to install it but can not install and send error massege during install and also I can not remove it from my device for re download and try again, please tell me what should I do.

    What is the error message exactly?

  • Update install and delete error says itunes is on a network unavailable.  I also upgraded Itunes and now it won't recognize my Ipad touch

    I upgraded Itunes about a month ago and since then It does not recognize my Ipod and then I tried to update again and it won't upgrade.  The error message says it's on a unavailable network path not found.  So I tried to get tech support they told me to delete and start over.  I went through my control panel and it gave me the same network error and would not delete the software.  I am beyond frazzeled over this.  Please help.

    Essentially 'b noir' is correct, it will be relating to the .msi file that is, for lack of a better word, screwed. It's a pretty long process in order to cleanly remove and redownload the correct file.
    Not really a long process if you can hunt down a copy of the Windows Installer CleanUp utility. If you have that installed and working, then so long as you know which particular msi (or msis) are being complained about, you can get past the issue in most cases pretty quickly. For example, for an itunes.msi message see:
    error message that I'm missing iTunes.msi.
    There's some additional information in my notes on the bookmark about one possible complication requiring a bit more work. (I'm steadily building the additional info on advanced troubleshooting into bookmarks as I build my public Bookmarks, and eventually tag searches on my Bookmark tags should pull up advanced troubleshooting steps too.)

  • Acrobat v10x CS6 Installation: "Some items could not be installed and then Error 1301

    Brand new MacBook Pro Retina 16GB, 512SSD, Mountain Lion.
    I successfully installed all apps in CS6 Web and Design Premium EXCEPT... I had a warning on Acrobat install: "Some items could not be installed properly".
    However, Acrobat 10.0.0 launches and runs fine. Then, I try to move on and upgrade to 10.1.4 (or even 10.0.1) and no matter whether I uninstall and reinstall, repair disk permissions, talk to Adobe support for four times now and let them try everything, I'm still getting Error 1301 "The update could not be applied because Adobe Acrobat application contents were modified since the original installation. I had them send me a hard copy of the CS6 Suite and reinstalled the entire suite. Again, ALL other apps run and upgrade perfectly EXCEPT Acrobat.
    Now, support tells me to use the "Run Repair Acrobat Installation to replace missing files." from this advisory and call them back later (file:///Users/mbp/Desktop/extras/maccomputers/Errors%20and%20freezes%20%7C%20Adobe%20Rea der%20%7C%20Mac%20OS.webarchive).
    Here's the latest hitch: There is no such:  "Repair Acrobat Installation". I'm thinking they think there is and there isn't.
    Also, in details this:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed
    Any wisdom out there which is not in the "experimental" arena would be appreciated.

    Hi,
    Thanks for the advice. Tried this and does not work. Exact same results. I really wonder if I am the only person with a MacBook Pro Retina with an 512GB SSD running Mountain Lion that has tried to install Acrobat 10.0.0. I think there is some conflict with Mac OS 10.8.2 that is hostile to the installation sequence Adobe created for Acrobat. I fear Adobe would rather I upgrade to Acrobat X1 than spend their time patching this.
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW006, DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ----------- Payload: {E1C48031-9366-427F-AC04-535CEDAAD995} Acrobat X Pro  10.0.0.0 -----------
    ERROR: DW006: Apple Package failed to install successfully.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    ERROR: DW050:  - Acrobat X Pro : Install failed

  • How can I restore my iTunes library via Time Machine after an erase/install and upgrade to Snow Leopard?

    Actual problem:
    I reinstalled all my programs that I need without a hitch. Meanwhile, I've been trying to recover the few files (mostly music) I actually store on my computer's hard drive as opposed to on my external HDs. I use one external HD for my graphic files and the other is strictly for Time Machine backups. I tried to recover my iTunes music, but I got a message that says: "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." I restored (I thought) my iTunes library Username/Music/iTunes." Additionally, I was going to upgrade to Mountain Lion, but I have seen that there were issues with Lion and iTunes libraries so I'm a little wary of this.
    Excuse the long explanation, but I figure the problem may possibly be in the details of the weeks prior this problem:
    I have recently been having issues with my iMac. I brought it in to see a Genius twice within the past month and they couldn't seem to find the problem. (It would restart Finder of it's own accord while I was using Adobe CS programs) I figured it was worth backing everything up via Time Machine and doing a complete erase/install/factory reset. I did so and had a problem again, and brought it in again, third time. The Genius did another diagnostics tests and found nothing and said my erase/install probably did the trick, but time will tell. I am, after the erase/rewrite and upgrade running Mac OS X 10.6.3 and previous to this was still running Tiger.

    So, I didn't update iTunes and the rest of it after installing Snow Leopard. My stupidity, I figured that the OS was more up to date than the one I had previously so that all the programs that come with it probably were more current than the ones I was using. However, now that I have updated all my software, I am still getting the same message from iTunes that I was previously. I cannot open iTunes at all, same "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." message. I'm confused again. Checked a few other threads and whatnot and cannot seem to figure this out.

  • Help with Adobe Photoshop 5.0 install and upgrade to 7.0

    hello
    I have a photoshop 5.0 (purchased to work with win xp) which i have not installed and used for a long time
    I also have a Photoshop 7.0 win upgrade
    My question is this:
    I want to install my adobe photoshop 5.0 on a windows 7 machine,
    i want to than upgrade to photo shop 7.0
    for photoshop 5.0,
    the cd runs and i get the SETUP MENU, WHERE I AM OFFERED OPTIONS TO INSTALL ADOBE PHOTOSHOP 5.0 AND ADOBE ACROBAT READER V3.01 ETC....
    when i click on the install adobe photoshop 5.0 icon, it doesn't seem to do anything/
    i have also tried to see if anything is happening in task manager - task says running - but nothing seems to be happening
    any ideas why?
    Thank you for your help.

    Are you trying to install 5.0 just so you can install the upgrade to 7.0?
    If that's the case, you need not install 5.0.  Just install 7.0 and when it asks you about what you're upgrading from, insert the disc for 5.0 per its instructions.
    And, you're kind of living in the past...   Even Photoshop 7.0 has very limited capabilities compared to what's shipping today (which is 5 full version releases newer).
    It might be about time to buy a modern version of Photoshop.
    -Noel

  • Install and Upgrading Essbase windows Vs Unix

    what are the biggest differance when installing and or upgrading from 11.1.1.3 to 11.1.2.2 on a Unix Box

    It sounds like a question that you asked before - Unix Install of 11.1.2.1
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to install CC upgrade: error 43

    I,m unable to install CC upgrade. The installation stop to 63%. Message: Le programme d’installation n’a pas pu accéder à un fichier ou un répertoire essentiel. Veuillez relancer l’installation.(Code d’erreur : 43) Contacter le service clientèle

    Mimi_sam please make sure your current User account has correct file permissions to write to the temp directory and that you have sufficient disk space.

  • Clean Install and upgrade of MBP 13"

    I've recently noticed that my MBP 13" 2010 has become really sluggish. It takes a lot longer to buffer commands and open apps. I use Logic Pro X alot and sometimes Final Cut, so for my main workstation to be sluggish with quite CPU intensive apps is really annoying!
    I was wondering if there was any way to upgrade the CPU. I doubt it, I know, but what's the harm in asking?
    Secondly, would a clean install with upgraded hardware be a good idea for updragding? I wanted to install an SSD and HDD with the SSD containg the OS and Logic and a few programs. I don't really have anything of value on my current HDD and don't want to go through the process of cloning, so a clean install was my first thought
    I've upgraded the RAM to 8gb, but you can't go to 16gb, can you?
    I've thought about getting a new Mac (both iMac and Macbook) but they too expensive. A hackintosh was the next thought but they seem unreliable.
    The SSD and HDD combo could work because I'm running out of space on my 320gb HDD and that might be a benefactor, so a faster SSD for a few programs and 1tb appeals well! Upgraded RAM and CPU (though unlikely to be possible) will be done if the Macbook can handle it/can be done!
    Thanks for any help or comments in advance!!!

    bahramik wrote:
    I was wondering if there was any way to upgrade the CPU.
    No.  Only by purchasing a MBP with a faster CPU can you obtain more speed.
    Secondly, would a clean install with upgraded hardware be a good idea for updragding? I wanted to install an SSD and HDD with the SSD containg the OS and Logic and a few programs
    . I don't really have anything of value on my current HDD and don't want to go through the process of cloning, so a clean install was my first thought
    As far as the data is concerned, that is you decision.  An SSD will enhance performance.
    bahramik wrote:
    I've upgraded the RAM to 8gb, but you can't go to 16gb, can you?
    Yes,  OWC has demonstrared that 16 GB RAM will be accepted by a 13"  2010 MBP:
    http://blog.macsales.com/16302-some-2010-mac-owners-can-get-more-ram-than-they-t hought
    I would urge you to purchase the RAM from them.  It will work, if you purchase from another vendor it MAY work.
    I've thought about getting a new Mac (both iMac and Macbook) but they too expensive. A hackintosh was the next thought but they seem unreliable.
    That will not be discussed here,  Illegal.
    The SSD and HDD combo could work because I'm running out of space on my 320gb HDD and that might be a benefactor, so a faster SSD for a few programs and 1tb appeals well! Upgraded RAM and CPU (though unlikely to be possible) will be done if the Macbook can handle it/can be done!
    A 1 TB SSD will serve your needs well.
    Ciao.

  • II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

    My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
    The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

    You are correct in that your 1G iPod Touch has all the latest software updates.  It can only be updated to version 3.1. 
    However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch.  So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible. 
    Sorry.
    B-rock

  • Download, install, and upgrade

    HAD SKYPE SET UP N WORKING.......NOW DESPITE TRYING TO UPGRADE MASSIVE TIMES WONT WORK!!!!!!    WINDOWS 8 WONT LET ME SIGN IN WITH NEW VERSION BUT USING SAME INFO GOT ME IN TO KEEP SEEING UPGRADE REQUEST.  ITS NOT DOWNLOADING IS MESSED UP OR SOMETHING...THIS SUCKS AND I SEE I AM NOT ALONE WIYH THIS!!!!!!!   FIX IT!!!!

    I Really dislike this change, i liked it the way it was before i had to download this desktop thing... i have tried and i cant seem to permanantly close the window. This new update has just anoyyed me in the most wrong way, PLEASE take it back to the way it was. I wish this update or whatever this was never exsisted. Whos idea was this? and how did you think it was better? this looks like a Downgrade not even close to an upgrade, i have nothing but bad words to say about this download. it has already caused me problems like changing my passwords and doing my profile picture again, that profile picture isnt a massive deal but if you just left Skype the way it has Always been i would have never had to do anything... everything was set to where i liked it.. now theres this ugly desktop skype thingy that i cant close, i cant see much, everything is small.. PLEASE change it to the way it was... i dislike this, i Hate this new change, im so frustrated about this new download app install downgrade, just change it back and leave it to the way it was. WHY change it in the first place? and why downgrade? what was the problems with it they way it was? now when i try to go back to the way it was in my windows page (i have windows it just tells me "we've replaced this app with an improved Skype experience. SEE WHAT YOU CAN DO WITH THE NEW APP! i hate how this has happend. Disgusting. i Love Skype in my windows Page, i like video calling , normal calling, i know i can still do this but i dislike like it, please tell me im not the only person who feels that this was a WASTE...this is a problem.

  • Installing and Upgrading Mac OS X 10.6 with Boot Camp

    Hi
    I have the iMac 2.4 GHz (Mid 2007). The Operating System was 10.5 but used to run Windows via Boot Camp with a 50:50 Hard Drive partition for Mac OS and Windows.
    Yesterday I purchased Snow Leopard, went to install it, after the installation it said an error occurred.
    Now my machine only starts up in Windows, and only displays the Windows Hard Drive when I reboot.
    Can anyone help me to restore the Mac OS, as I want to remove Boot Camp and use the iMac as an iMac with no Hard Drive Partition and no windows.
    Thanks

    Well the machine was predominantly run on windows, so what ever was on the Mac Partition did not need to be backed up.
    Everything on the Windows Partition is still there and works perfectly, but when I go to boot camp on Windows to restart in Mac, it doesn’t and restarts back to Windows.
    So now the SL DVD does not load.
    I am going to back up the Windows partition on an external Hard Drive.
    After, is there a way to simply restart the machine to factory settings and then re install in SL DVD?
    Thanks

Maybe you are looking for