Installing Aperture 2.14 on Macbook Pro

I purchased an iMac 3 years ago with Aperture 1.0 pre-installed. Since that purchase, I have upgraded Aperture up to version 2.14. I now have a new Macbook Pro that I would like to install Aperture on for working in the field. Now the problem...or question...
I cannot locate the original registration/serial number so I can sequentially "install" the software from version 1.0 through 2.14. What if anything, can I do?

The quickest alternative is to go back to your old iMac and grab the serial number off the old copy. Either by firing it up looking at /Library/Application Support/ProApps/Aperture System ID - you will need to translate the data in the ID file if you cannot just fire it up and read it from the "about aperture"
RB

Similar Messages

  • How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help?  Many thanks regards Alf

    I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
    Ive tried to download it from the App Store but it wants me to pay again.
    Can anyone help on how to install Aperture 3 on my new Macbook .
    Many thanks regards  Alf

    Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
    Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie
    BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

  • Installing Aperture 3 onto new MacBook Pro

    Hi Support Team,
    I own a copy of Aperture 3.0 (on disk); I bought the software back in 2010 when it was first released and have been running the software on my MacBook Pro (2009 model).
    Now, I have bought the new MacBook Pro Retina and installed Mountain Lion.
    Question:
    Do I have to purchase the latest version of Aperture to work on the new MacBook? 
    Or can I load Aperture 3.0 using my original disk and hope that I can update the software to the latest version (3.3.2)?
    Thanks,
    Steve

    You should be able to install with the DVD and then download the AP 3.3.2 installer from here:
    http://support.apple.com/kb/DL1561?viewlocale=en_US&locale=en_US
    You may or may not need to go the 'System Preferences > Security & Privacy' and select 'Anywhere' in the 'Allow applications downloaded from:' section. I am not sure whether or not the DVD will get flagged as it may or may not be a signed installer.
    Suggest running the AP 3.3.2 update and then 'Repair Permissions' via Disk Utility prior to launching Aperture for the first time.

  • Install failure for Aperture 3 on my MacBook Pro. Operating on Lion.

    I am trying to install Aperture 3 on my MacBook Pro. I am operating on Lion and my software is up to date. Any clues as to what is goin on? Do I have a bad disk?

    Just a hunch: If you are trying to install from an installation DVD or older disk image, and you get the message
    "check with the developer to make sure Aperture works with this version of Mac OS X"
    you may have a problem with an expired developer certificate (they expired mid march).
    To fix this, set the Date  in " SystemPreferences -> Date&Time" to a date well before March 2012 and run the Installer again. If that succeeds and Aperture now runs , reset the date to te current date.
    If not, please post back answer and Tony's question  ....
    Léonie

  • HT4007 How can I get Aperture onto my new Macbook Pro 15" Retina that DOESN'T have a superdrive from my 5 year old Macbook Pro?  I still have the CD and serial number for Aperture. HELP! PLEASE!!

    Like the thread topic says. I need help getting Aperture onto my new macbook pro that does not have a drive. I have no need for a drive after this to be honest just need my programs back on it. Thanks.

    Two options:
    Make a disk image or a clone of the installer CD on your Mac that has a super drive - you can create a disk image using Disk Utility or use Carbon Copy Cloner (if you have it) to clone the DVD to a thumbsdrive. Then run the installer on your MBY from this copy.
    Or download the Trial Installer and install from there:
    Download the Aperture 3.1 Trial.  http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
    Open the Aperture Trial disc image.
    Double-click the "Aperture Trial.mpkg" file.
    Follow the onscreen instructions to install Aperture.
    After the installation completes, choose Software Update from the Apple () menu.
    Install the Aperture 3.4 update from the list of available updates.
    Regards
    Léonie

  • How do I transfer Aperture to my new macbook pro?

    Hi, I've just bought a powerbook pro (no optical drive) and I have aperture 3 on cd which I've installed on my iMac. How do I get Aperture 3 on my new powerbook?
    Thanks

    It is safer to install Pro Applications like Aperture by running the installer than migrating them.
    Just for completeness's sake two more options:
    You can also download the Aperture Trial installer - it will install the same version you are having on CD - download from here:   Aperture 3.1 Trial 
    Then update it immediately from the Apple  menu> Software update, launch it, and enter your serial number(s). Don't try to launch Aperture on your libraries, before you have run software update.
    Or,  use Disk Utility to create a Disk Image from your CD and copy  this to a thumbsdrive. Then open the disk image on your new Mac and run the installer.
    Just in case, that you get an error message "check with the developer to make sure Aperture works with this version of Mac OS X" don't worry, some of the older installer DVDs give his error message, because a developer certificate expired. This easily solved by resetting the date before installing to a date before February 2012, see the thread below.
    Re: Install failure for Aperture 3 on my MacBook Pro. Operating on Lion.
    Regards
    Léonie

  • HT3805 Installation of Aperture 3 on new Macbook Pro, upgraded trial version.

    Can I intstall Aperture 3 on my new macbook pro if I initially installed it on my current macbook pro using the trial version and product key?  The trial version of Aperture 3 is no longer offered on Apple's site.
    Thanks.

    Can you tell me if there is a way to look up my product key?
    You are welcome.
    You see the serial number in the "About" panel on your curent MacBook. In Aperture's main menu bar select: Aperture > About Aperture.
    You should have received the licence key by email, if you unlocked the Trial. Search your mail box, if you still have a copy of the email. I would archive it, in case you ever need a proof of purchase.
    Regards
    Léonie

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • How to install memory modules on a macbook pro 15"

    I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?

    how to install memory modules on a macbook pro 15"
    Read the manual / user guide that came with your comptuer or download it from http://support.apple.com/manuals/
    I run Windows 7 via parallels desktop on my macbook pro. How do I type special characters on a Word document using the mac keyboard?
    Post your question on the Paralells forums:  http://forums.parallels.com

  • I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8.

    I'm unable to do a clean install of Firefox 6 on Macbook Pro OSX 10.6.8. After trashing the firefox.app from the Applications folder and trashing a related file in the Library folder and then reinstalling, all of my previously opened windows and tabs reappear. And the history and bookmarks are populated too! Then, the computer freezes up so that I must reboot. Because these windows automatically open and the history and bookmarks are populated with my old history and bookmarks, I believe this is not a clean install. Please help.

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • HT1338 how do i install adobe flash player on macbook pro

    how do i install adobe flash player on macbook pro?

    Download the player from the link that Allan provided.
    Doubleclick the downloaded file to mount the .dmg file.
    When a window opens with the 'Install Adobe Flash Player', doubleclick that file to start the install.

  • Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

    I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

    Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

  • Can't install windows XP to a macbook pro with an Intel X25-M SSD

    It's a strange problem:
    We just bought some new unibody macbook pro 2.8Ghz machines, (4GB ram)etc. We also obtained some of the new Solid State Drives (SSDs) from Intel, the X25M-80GB.
    (part number: SSDSA2MH080G1C5)
    After installing the SSD into the macbook pro, everything works.....in OSX. Installation of 10.5.5 went without problem, all updates/firmware applied, everything works fine.
    The problems start when you try to install XP. We used the boot camp assistant, and created a 32GB partition, put in a XPSP2 disk, and start the installation.
    Everything starts up nicely and goes to the blue/white text based installer for XP. It loads drivers, and then reaches the point where it would ask you to select a disk to install to (where you would normally see the three partitions, 1 being the FAT32 you select as C:).
    However, what you get instead is an error message that: +"Setup did not find any hard disk drives installed in your computer...."+ and then you have to exit.
    If you use the original 320GB drive, everything works as expected, (nothing wrong with the laptop hardware, or the installation CD). If you stay in OSX, everything works as expected. (nothing wrong with the Intel SSD either)
    To further add information, we also installed the Intel SSD into a Mac Pro (2008) as a second drive, booting to a windows installation (through boot camp) on the first disk. Windows boots fine, but there is no sign of the other drive AT ALL. (not a driver issue here - there simply isn't any hardware here as far as windows is concerned.)
    That brought us to our conclusion that there is something awry in the BIOS/EFI
    being presented to Windows, that doesn't support the Intel X25M drive at all.
    However, there is no user customisation (or even access) to the settings or what's happening at that point in the boot cycle, so I'm unable to diagnose further.
    Given the Intel SSDs are using their SOC (system on a chip), (I believe - but I could be wrong on that one) perhaps that just isn't supported by the EFI?
    Would appreciate some advice on where to go from here? These SSDs cost about 1400AUD+ each, so we'd rather like to actually use them....
    I suspect we're asking/requiring for an EFI update.
    (to head off some questions: Yes, we've used different discs, and also different computers...The disk and hardware themselves are just fine. Also, the drive WAS formatted with a GPT paritition.)
    Thanks!

    From reading Vista forums support for SSD is one of the things Vista SP2 and Windows 7 hope (need) to improve upon. I was in a similar discussion once befoe on SSDs:
    http://discussions.apple.com/thread.jspa?messageID=8482110
    http://news.cnet.com/8301-13924_3-10026010-64.html
    http://www.intel.com/design/flash/nand/mainstream/index.htm
    http://www.google.com/search?hl=en&rls=com.microsoft%3Aen-US&q=IntelSSDVista
    I don't think it is EFI issue, but with XP and drivers, lack, and wonder if you can try with Vista?
    http://arstechnica.com/news.ars/post/20080908-intel-tosses-hat-into-ssd-ring-wit h-80gb-launch.html
    That won't solve performance issues, but should work.
    http://www.reghardware.co.uk/2008/07/22/sandiskssd_vistabeef/
    "My guess is that [Samsung and Microsoft] are maybe working on the OS recognizing an SSD with a 4K-byte sector size instead of a hard disk drive with a 512-byte sector size," Wong said.
    Sun is already working with Samsung to bulk up SSD support on the ZFS (Zettabyte File System), which is included in the Solaris OS, and will also be supported in Apple's upcoming Mac OS X 10.6, codenamed Snow Leopard. Sun is adding capabilities to boost the durability and performance of SSDs on ZFS-based operating systems. For example, Sun may add defragmentation capabilities for SSDs, which organizes data in a particular order to enable quicker data access.
    SSDs were not considered ideal for defragmentation because of limited read-and-write capabilities, Wong said. However, Samsung and Sun in July jointly announced an 8G-byte SSD that bumped up durability from 100,000 read-and-write cycles to 500,000. That brings defragmentation in SSDs closer to reality, which could improve its caching and provide quicker access to data. Sun plans to put SSDs into storage products later this year.
    http://www.itworld.com/operating-systems/54115/samsung-microsoft-talks-speed-ssd s-vista

Maybe you are looking for