Installing Application Server 10g (10.1.3) on Windows Server 2008 Document

Basically, I need to find out if 10.1.3 application server Enterprise Edition can be installed on Windows Server 2008 with a 64-bit operating system. A yes or no is helpful, but I would like to have a link to the documentation. I'm assisting on an install and have been asked to find this info.
I've done some searching, but haven't yet been able to find anything on 2008. I found this ( [http://download.oracle.com/docs/cd/B25221_04/win.1013/install/reqs.htm#sthref62] ), which is from this ( [http://download.oracle.com/docs/cd/B25221_04/getstart.htm] ), but the documentation found there only mentions as high as Windows Server 2003. Our DBA would like to see it say Windows Server 2008 64-bit, not just Windows Server 2003 and up (before we make an order on hardware).
Does anyone have a link that specifically says windows server 2008 / 64-bit is possible?
Thanks in advance!

Since Windows 2008 was released after the 10.1.3 release, the Installation Guide does not include Windows 2008. In this case, the Certification should be checked before proceeding.
Oracle Application Server 10g Release 3 (10.1.3) Certification Information
[http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_101310.html]
From here, you will find that 10.1.3 is certified on Windows 2008 and that you should also see the following document for more details:
Oracle Application Server 10g Release 3 (10.1.3) Installation Requirements for Microsoft Windows (Doc ID Note 444112.1)
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=444112.1
(requires login)
reference:
How to Find Certification Details for Oracle Application Server 10g and Oracle Fusion Middleware 11g (Doc ID 431578.1)
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=431578.1
(requires login)
...Ken

Similar Messages

  • Installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit

    installing Application Server 10g (10.1.3) on Windows Server 2008 R2 64 bit
    i have installed this but restarting of server making problem
    i m not able to start opmn.ctl
    what should i do is there any other version to be downloaded
    I did.
    1. i installed X 86 software as 64 bits is available for itanium only
    2. it installed successfully after changing value in orapram.ini
    now after reboot of server my opmnctl doesnt come up
    what can be the issue?

    hi,
    1st..check whether all the services of oracle are started in services.msc(if possible pls specify what all services of oracle can you see in services.msc)
    2nd..when you use the command opmnctl startall..what errors do you get..
    3rd..can you specify the opmn.logs and ons logs
    Regards
    Fabian

  • How to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 - Intel Xeon

    I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
    When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
    I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
    Thanks a lot!!!
    I'm desperated!!

    Hi,
    reply to my own question:
    In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
    - Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
    or
    - Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
    So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
    ... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
    So I'll give it a try with 10g database server ;-)))
    Regards,
    Thomas Heß

  • "The task sequence has been suspended. LiteTouch is trying to install applications. This cannot be performed in Windows PE."

    MDT 2012 Server is up and running. I mistakenly deleted a Task Sequence step called "Install Application" that I thought was not needed (I know I should have disabled it and tested).
    I have a problem now, when I went to image a computer I did not get application list (This used to work before I deleted the above TS step) with items to check and uncheck for installation.  "Install Application" TS was readded but now when I try to
    image I get this error:
    "The task sequence has been suspended. LiteTouch is trying to install applications. This cannot be performed in Windows PE."
    I've tried moving it to different positions on the list (Higher and lower) to no avail, I always get the same error. Please advise.
    -Thanks in advance!

    On the computer you are deploying to "the client", boot into WindowsPE just like you are going to image and before you authenticate or
    get any dialogue boxes, press F8 in WindowsPE to get command prompt and type the following:
    diskpart
    list disk
    select disk 0
    list part
    select part 1
    clean
    create part primary
    assign
    active
    exit
    Please mark this as the answer if it works.
    You are awesome this worked for me I didn't see how I was going to get my new computer to reimage again Thank you sooooooooooooo much!!!

  • Is there a pre-installed application on the iMac that would allow me to crate documents, presentations and spreadsheets or do I have to buy iWork for this?

    Is there a pre-installed application on the iMac that would allow me to crate documents, presentations and spreadsheets or do I have to buy iWork for this?
    Thank you.

    No pre-installed app that will do all that, and yes, you could buy iWork - or you could download the free (although they do seek donations) LibreOffice: http://www.libreoffice.org/ or OpenOffice: http://www.openoffice.org/porting/mac/

  • Cannot Add File Share to (any) File Server Role of a Cluster in Windows Server 2012

    Cannot Add File Share to (any) File Server Role of a Cluster in Windows Server 2012...
    Get this message in the Operational Log in "FileServices-ServerManager-EventProvider" section of MS-Windows Eventlogs:
    Exception: Caught exception Microsoft.Management.Infrastructure.CimException: The xsi:type attribute (MSCluster_Property_Resource_Network_Name) does not identify an existing class.
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext(Boolean discardResultsAndErrors)
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext()
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.PerformQuery(String cimNamespace, String queryString)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.BuildNodes(ICimSession session, ClusterRole scopeType, String query, IDictionary`2 groupNameToTypeMap)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.GetClusterClientAccessPointNames(ICimSession session, IDictionary`2 groupNameToTypeMap)
       at Microsoft.FileServer.Management.Plugin.Services.ClusterEnumerator.RetrieveClusterConnections(ComputerName serverName, ClusterMemberTypes memberTypeToQuery)
    Thanks for help...(everything else works fine in other type of cluster roles).
    Thomas.

    This issue also happens in fresh Windows 2012R2 installations, not just upgrades from 2008R2!
    I have the issue where I cannot modify any settings on SMB shares.  Here is the stacktrace.  It appears to be WMI related.
    Error: ERROR: Task 'TEST.xxxxxxx.COM-ClusterStorage$-SmbShareUpdate-46bcabf6-1dd4-4a48-a525-5e5d374596c7' has failed: Microsoft.FileServer.Management.Plugin.FSACException: Error occurred while updating an SMB share: The requested operation is not supported.
    ---> Microsoft.Management.Infrastructure.CimException: The requested operation is not supported.
       at Microsoft.Management.Infrastructure.Internal.Operations.CimSyncEnumeratorBase`1.MoveNext()
       at System.Linq.Enumerable.SingleOrDefault[TSource](IEnumerable`1 source)
       at Microsoft.Management.Infrastructure.CimSession.ModifyInstance(String namespaceName, CimInstance instance, CimOperationOptions options)
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.ModifyInstance(ICimInstance instance)
       at Microsoft.FileServer.Management.Plugin.Services.FSCimSession.ModifyInstance(ICimInstance instance, IEnumerable`1 propertiesWithKeys)
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoUpdateInstance(ICimSession session, ICimInstance instance)
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoWork(Object sender, DoWorkEventArgs e)
       --- End of inner exception stack trace ---
       at Microsoft.FileServer.Management.Plugin.Providers.WmiUpdateTaskBase.DoWork(Object sender, DoWorkEventArgs e)
       at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)

  • Compatibility Exchange Server 2003 SP2 and Domain controllers Windows Server 2008 R2

    Hi all, I have this scenario:
    - Two Domain Controllers Windows Server 2003 R2 SP2
    - Two mail servers Exchange Server 2003 with the following version:
      6.5 (Build 7638.2 Service Pack 2)
    I want to upgrade my domain controllers to Windows Server 2008 R2.
    My question is whether exchange Server 2003 6.5 (Build 7638.2 Service Pack 2) is supported with Domain Controllers Windows Server 2008 R2.
    Can you tell me some official Microsoft website where this reflected?
    regards
    Microsoft Certified IT Professional Server Administrator

    Exchange Server 2003 SP2 supports DCs running Windows Server 2008 R2. These DCs should be RWDCs and not RODCs:
    Exchange 2003 SP2 will now be supported against writeable Windows Server 2008 R2 Active Directory Servers.  Additionally, with the General Availability of Exchange Server 2010, and those looking to standardize on Windows
    Server 2008 R2 we have enhanced the supportability of forest and domain functional levels up to Windows Server 2008 R2.  This change is effective immediately on Exchange 2003 SP2.
    Reference: http://blogs.technet.com/b/exchange/archive/2009/11/30/3408893.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Microsoft SQL Server 2012 Performance Dashboard compatible with windows server 2012?

    Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!

    Is Microsoft SQL Server 2012 Performance Dashboard compatible with Windows Server 2012? I only see Windows Server 2008r2 as the most recent version in the System Requirements list. Thanks!
    As per download documents supported windows versions are
    Windows 7, Windows Server 2008 R2, Windows Server 2008 Service Pack 2, Windows Vista Service Pack 2.
    I cannot see any mention of Windows server 2012 in system requirements
    See System Requirements 
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Installing 10g R2 on 32-bit Windows Server 2008 (not R2!)

    I want to install 10g R2 on Windows Server 2008 32-bit OS.
    It looks like 10.2.0.4 is the current release that supports Server 2008, however it doesn't seem to be available as an installation option.
    The download page says to download 10.2.0.3 and then use the patchset 10.2.0.4 from Oracle MySupport.
    Doesn't the patchset have to be installed over a current installation? How do I get an installation on my OS, if 10.2.0.3 will not install on it? Or will it?

    CKPT wrote:
    I want to install 10g R2 on Windows Server 2008 32-bit OS.
    It looks like 10.2.0.4 is the current release that supports Server 2008, however it doesn't seem to be available as an installation option.
    The download page says to download 10.2.0.3 and then use the patchset 10.2.0.4 from Oracle MySupport.
    Doesn't the patchset have to be installed over a current installation? How do I get an installation on my OS, if 10.2.0.3 will not install on it? Or will it?What is your current BASE patchset? You can upgrade from 10.2.0.1 to 10.2.0.4 directly.BASE patchset? Not sure what you mean. This is a new install.
    Are you implying that install 10.2.0.1 first is the way t go. Not sure if that will install on Server 2008.
    I can't fiddle with the product prereqs xml to make it install. We will be instructing the customer on the installation and they will not want to do that.

  • How to install Oracle App Server 10g (10.1.3) on Windows 7 Machine

    Hi,
    I am unable to install Oracle 10g (10.1.3) on Windows 7 machine.
    The installer setup.exe check the OS version,before the installation and close the process.
    Please help me.
    Please send the complete steps to setup the oracle 10g release 10.1.3 for Windows 7

    Sorry ,
    Where I enable the check box verified by user & Where is this option.
    I run this setup using command prompt.

  • Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

    I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
    The server is brand new and it's a fresh install of Apache and ColdFusion 9.
    Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
    On closer examination of the Windows error log, I saw the following error:
    The Apache service named  reported the following error: >>>
    httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
    I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
    After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
    I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
    I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
    The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
    Any help would be much appreciated. I have spent hours trawling the Web for solutions.

    I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
    OK. Simple solution to this. I'll put it here for other peoples' reference.
    To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
    Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
    Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
    The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
    Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
    IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
    Hope this helps someone else out.

  • Error during configuration process while installing obiee 11.1.1.7.0 in windows server 2012

    HI..
    I'm having an issue while installing obiee 11g(11.1.1.7.0) in windows server 2012 and using the database as ms sql server 2008. During configuration process after the installation process is completed , here the process is stopped at "Step:executing opmnctl start configuration_obisch1" status "failed"
    Here is the error:
    Error
        opmnctl task failed
        Step Executing: opmnctl start coreapplication_obisch1 failed
        Configuration Action "Executing opmnctl start coreapplication_obisch1 " has failed. please check log files...
    any help would be great
    thanks..

    Friend,
    Installer file size is:
    Size: *1.23 GB (1,323,085,837 bytes).*
    Size on disk: *1.23 GB (1,323,089,920 bytes).*
    I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
    Some additional recommendations to solve this case.
    Thank you for supporting.
    Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

  • Error while installing SAP b1 9.0 PL4 on Microsoft Windows server 2003 SP 2.

    Hi all,
    I am trying to install SAP b1 9.0 Pl 4 on Microsoft Windows Small Business Server 2003 SP 2 (32 bit). Server tools and server was successfully installed, now facing an issue while I m running the Client from package folder below is the screen shot for error. Please help ASAP.
    Thanks all
    Sonil

    Hi,
    Yes,  9.0 version will not support above server. Please check below guide:
    http://www.abbasoft.com/images/Hardware_software_requirements.pdf
    Thanks  & Regards,
    Nagarajan

  • Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

    Hi
    I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
    to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
    Thanks Everybody

    Hi Farid,
    For SQL server running on virtual server please refer to following article :
    http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
    In addition , for license issue we still recommend you to contact MS Activation Center:
    http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • How to install first forest and active directory on the windows server 2012 R2 core?

    hi to all
    i installed a windows server 2012 R2 Core edition on the server platform and i want install first forest and Domain on this server core by cmdlet...but i cannot install it. i search in the technet and other sites and blogs on the internet
    and i saw many commands that use for install it such as "DCpromo /unattend" and even
    "Install-addsforest" in the powershell but still i cannot get a result from these commands.
    i need step-by-step guide that help me for install new forest and domain in the server 2012 R2 core.
    thanks a lot friends

    C:\PS>Install-ADDSForest
    -DomainName mydomain.local -CreateDNSDelegation
    -DomainMode Win2012 -ForestMode Win2008R2
    -DatabasePath "d:\NTDS"
    -SysvolPath "d:\SYSVOL"
    -LogPath "e:\Logs"
    you can use above example
    Darshana Jayathilake

Maybe you are looking for