Installing Applications Question

new user here.
I sometimes get a "ThisApp.app" is an application downloaded from the Internet are you sure you want to open it?" /both/ when I start an app from the ThisApp.app icon in Applications (I think) and from the icon that I have Kept in the Dock. It then goes on to say "ThisApp.app is on the disk image....".
Can someone explain if this is a problem and more generally help me understand the disk image?
The deal is that I download a disk image, double click on it - and then ostensibly I am given a dialog box that gives me an opportunity to drag the app to the "Applications folder" (which I see as an image in the dialog)? After this I then eject the disk image?
Should all apps give me an opportunity to drag it the an Applications folder and if not should I do this manually?
Thanks.

Hi. Many thanks.
Happy to be back for a number of reasons but still a sharp learning curve.
I am inclined to keep the dmg's in a folder that has all my installed applications so that I can back this information up for future installs/re-installs.
Can I please ask you about the error in the OP however? For instance, if I d/l a dmg, double click on it, drag the App icon into the App icon folder (for instance or in some instances I guess it installs automatically and I don't get asked to do this?) - and then I open the Application -
I get an icon on the dock which in many cased I "Keep in Dock". Yes?
If I then doubleclick the icon in the dock I get the "error" I listed which is confusing to me. For instance it says something about the app being downloaded from the internet. But since I installed it and kept the icon in the dock, shouldn't mac know this is no longer an issue and just let me start the software?
Is this an error that is happening because the dmg is still in the same place (not moved or deleted) and mac /thinks/ it needs to warn me?
Will this "error" go away if I delete the dmg or otherwise move it perhaps?
It seems like an unnecessary warning...
Thanks again and yes I am liking the feeling of being back...
- Jonathan

Similar Messages

Installing Applications - Permissions Question/Problem

Hi All:
I have tried a number of searches and found variations on this, but was wondering why permissions get modified when I perform drag and drop installations of applications.
When I use an installer to install applications such as iWork, iLife, Office, and Creative Suite, and so on the permissions are always listed as system then admin then everyone, with system and admin being read/write and everyone being read only. In this situation, everything works perfectly. However, when I drag and drop to install applications such as Bento, most shareware, the permissions are listed as my user, then staff or admin, then everyone. Sometimes the staff and admin are listed read only and then the icon does not show up until I manually change this to read/write.
I have also noticed another problem when I am running in my limited access (none admin) mode: When I tried to install a NEW drag and drop application it would ask for a username and password and then install as described in the previous paragraph, but when I tried to install an UPGRADE to an application I had, it would ask me to authenticate. When I clicked authenticate it would go straight to the replace dialog and then when I click replace button it would fail. In the process of failing it would damage the application that was already installed. As a result I would then need to manually remove the damaged application and drop the upgrade back in to the folder, at which it would correctly ask for the username and password.
Something is wrong here. As a none admin user I should not be able to damage applications when prevented from installing them.
I've tried the usual permission fixes, but there must be something that is not quite right. I have even tried a reinstall.
Any suggestions would be appreciated.
Message was edited by: Paul Charlesworth
Message was edited by: Paul Charlesworth

Paul Charlesworth wrote:
Hi All:
I have tried a number of searches and found variations on this, but was wondering why permissions get modified when I perform drag and drop installations of applications.
When I use an installer to install applications such as iWork, iLife, Office, and Creative Suite, and so on the permissions are always listed as system then admin then everyone, with system and admin being read/write and everyone being read only. In this situation, everything works perfectly. However, when I drag and drop to install applications such as Bento, most shareware, the permissions are listed as my user, then staff or admin, then everyone. Sometimes the staff and admin are listed read only and then the icon does not show up until I manually change this to read/write.
this is normal and what you describe is exactly how it should work. when an app uses an installer it runs as root and the installer manages permissions on files it creates. they are always owned by root (=system in Finder GUI). when you install something by drag and drop then the application is owned by you and the group listed is your primary group which is staff.
I have also noticed another problem when I am running in my limited access (none admin) mode: When I tried to install a NEW drag and drop application it would ask for a username and password and then install as described in the previous paragraph, but when I tried to install an UPGRADE to an application I had, it would ask me to authenticate. When I clicked authenticate it would go straight to the replace dialog and then when I click replace button it would fail. In the process of failing it would damage the application that was already installed. As a result I would then need to manually remove the damaged application and drop the upgrade back in to the folder, at which it would correctly ask for the username and password.
Something is wrong here. As a none admin user I should not be able to damage applications when prevented from installing them.
I don't know what exactly happened here but I'm guessing you tried to upgrade an application that was installed by a different user originally. that might create permissions problems. but since all such apps are installed by drag and drop you can always trash the old app and install the updated one by drag and drop. that will always work (you'll have to authenticate of course).
I've tried the usual permission fixes, but there must be something that is not quite right.
repair permissions will not touch any 3rd party apps or files so it will have zero effect on this issue.
Any suggestions would be appreciated.
Message was edited by: Paul Charlesworth
Message was edited by: Paul Charlesworth
Message was edited by: V.K.

Prerequisiteinstaller.exe error - unable to install Application Server Role, Web Server (IIS) Role

Windows Server 2012 R2 running on Hyper-V VM. File services, App server & IIS roles installed
SQL Server 2012 installed
Tried:
kb 2765260 method 1 which is kb 2771431 which ends with "not applicable to computer"
kb 2765260 method 2 with no effect (this was power shell commands for PC's connected to the internet)
One post suggested "aspnet_regii - enable -i" but my OS doesn't have aspnet_regii on it (not sure what that implies)
One post suggested ServerManagerCmd.exe needed to be installed which sounds true as shown below (but where do I find this exe?)
There are some errors in the log file, I only included the portions where the errors are listed. The initial lines are at the top of the log file, then I skipped to the section where the other errors were. I can include the whole log if
it becomes necessary.
9:47:11 Processor architecture is (9)
9:47:11 Reading the following string value/name...
9:47:11 Common Startup
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
9:47:11 The value is...
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
9:47:11 Trying to remove the startup task if there is any.
9:47:11 C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
9:47:11 Error: Startup task doesn't exist. This is not a continuation after a restart.
9:47:11 Locating the following command line arguments file:
9:47:11 E:\PrerequisiteInstaller.Arguments.txt
9:47:11 Error: This file does not exist
9:47:11 Details of the current operating system:
9:47:11 Check whether the following prerequisite is installed:
9:47:11 Cumulative Update Package 1 for Microsoft AppFabric 1.1 for Windows Server (KB2671763)
9:47:11 Reading the following DWORD value/name...
9:47:11 IsInstalled
9:47:11 from the following registry location...
9:47:11 SOFTWARE\Wow6432Node\Microsoft\Updates\AppFabric 1.1 for Windows Server\KB2671763
9:47:17 Beginning download/installation
9:47:17 Created thread for installer
9:47:17 "C:\Windows\system32\ServerManagerCmd.exe" -inputpath "C:\Users\ADMINI~1\AppData\Local\Temp\1\PreE0DB.tmp.XML"
9:47:17 Error: Unable to install (2)
9:47:17 Error: [In HRESULT format] (-2147024894)
9:47:17 Last return code (2)
9:47:17 Reading the following DWORD value/name...
9:47:17 Flags
9:47:17 from the following registry location...
9:47:17 SOFTWARE\Microsoft\Updates\UpdateExeVolatile
9:47:17 Reading the following string value/name...
9:47:17 PendingFileRenameOperations
9:47:17 from the following registry location...
9:47:17 SYSTEM\CurrentControlSet\Control\Session Manager
9:47:17 Reading the following registry location...
9:47:17 SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired
9:47:17 Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
9:47:17 Last return code (2)
9:47:17 Options for further diagnostics: 1. Look up the return code value 2. Download the prerequisite manually and verify size downloaded by the prerequisite installer. 3. Install the prerequisite manually from the given location without any command line options.
9:47:17 Cannot retry
I'm presuming the first 2 errors are OK and just indicate optional startup modes for prerequisiteinstaller.exe
The 2nd set of errors seems more serious. I don't see ServerManagerCmd.exe on my PC that's listed in the error
I don't understand the last error which I'm supposing triggered the listed error even though there are other errors in the log.
Many of the existing posts don't match the configuration I'm using, and the ones that do match didn't seem to provide a usable answer. Any help is appreciated. Do these problems exist using Sever 2012 Standard? I will try that, but would
like to resolve the issue here with R2.
Thanks.
Best Regards,
Alan

ServerManagerCMD.exe is a deprecated utility and (as far as I know) is only found on Server 2008 versions, so I'm surprised it's needed for the preinstaller. Are you trying to install SharePoint 2010?
Running this page through Google Translate should give you an clearer idea on getting this installed.
http://blog.hand-net.com/sharepoint/2010-06-10-error-lors-de-linstallation-des-office-web-apps-2010-sur-windows-7.htm
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Error in installing Application server

Hi all,
I am trying to install application server for the first time. while installing I am getting the error in the REGISTER with Internet directory screen,
It has two fields to enter
1. HOST : I assume machine name in which the S/w is getting installed
2. PORT : Please tell me the port number which I have to enter here?
Ther version I am trying to intall is,
APPLICATION SERVER 10g (10.1.2.0.2)
One more doubt,
Is Oracle map viewer is available with APPLICATION SERVER 10g (10.1.2.0.2)??
Please help
-Thanks & Cheers
Antony

Hi Antony
Would you please post your question in that section of this forum ?
Forum Home » Application Server » Oracle Application Server - General
Expert of Oracle Application Server are willing to help you.
Thanks

Install Application - TextArea inside JScrollPane

I've been working on an install application to install another one of my programs (next/accept/next/ finish type of thing) and had a couple questions and would appreciate any help anyone can give.
Some Background info:
I made images and have them display as image icons through jlabels for the buttons and background. The labels have classes applying various mouselisteners (Mousepressed, MouseEntered, MouseExited, etc) changing the images and moving from screen to screen. I have my layout set to null, not for any particular reason, but because I have no formal education in layout managers.
1) Is there a conical solution to moving through various windows? That is, right now I move through the various 'screens' with a check on an int called state, that gets incremented and decremented through forward and back buttons. I looked at some code given to us on a test by our teacher (we had to find bugs) and saw that he had implemented a fake "state" interface, with constants like "Account_State" to control where you were in the program. This seems a bit easier to read than ints, but is there a correct built in version of his states?
2) On the second screen I have a license agreement (actually required for the application that gets installed), and a checkbox. The license is held inside of a JTextArea(scroll) inside a JScrollPane(textscroll). The JScrollPane is extending in weird ways. The following is a stripped down version of my code (it runs and demonstrates the problem):
InstalleApp
import javax.swing.*;
import java.awt.*;
public class InstalleApp {
    public static void main(String args[]) {
        InstalleFrame m = new InstalleFrame();
           Container content = m.getContentPane();
        m.setDefaultCloseOperation(3);
        m.setSize(550, 400);
        m.setUndecorated(true);
        m.setVisible(true);
        m.setTitle("Install");
}InstalleFrame
import java.awt.*;
import javax.swing.*;
import javax.swing.JFrame;
import java.awt.event.*;
import java.awt.Rectangle;
import java.awt.Font;
import java.awt.BorderLayout;
import java.util.*;
import javax.swing.event.DocumentEvent;
import javax.swing.event.DocumentListener;
import java.awt.event.ActionEvent;
import javax.swing.text.BadLocationException;
import javax.swing.JSlider;
import java.awt.Dimension;
public class InstalleFrame
    extends JFrame implements ActionListener {
public InstalleFrame() {
    try {
      jbInit();
    catch (Exception ex) {
      ex.printStackTrace();
public void actionPerformed(ActionEvent e) {
JScrollPane textscroll;
private void jbInit() throws Exception {
    this.getContentPane().setLayout(null);
    this.getContentPane().setBackground(UIManager.getColor("window"));
    background.setBounds(new Rectangle(0, 0, 550, 400));
    readcheck.setOpaque(false);
    readcheck.setText("I have read and accept the license agreement");
    readcheck.setBounds(new Rectangle(31, 357, 319, 32));
    scroll.setWrapStyleWord(true);
    scroll.setLineWrap(true);
    scroll.setText(
        "Copyright ? 2006-2007 GonZor228.com \n\nBy using or distributing this " +
        "software (or any work based on the software) you shall be deemed " +
        "to have accepted the terms and conditions set out below.\n\nGonZor228.com " +
        "(\"GonZor\") is making this software freely available on the basis " +
        "that it is accepted as found and that the user checks its fitness " +
        "for purpose prior to use.\n\nThis software is provided \'as-is\', without " +
        "any express or implied warranties whatsoever. In no event will the " +
        "authors, partners or contributors be held liable for any damages, " +
        "claims or other liabilities direct or indirect, arising from the " +
        "use of this software.\n\nGonZor will from time to time make software " +
        "updates available. However, GonZor accepts no obligation to provide " +
        "any support to free license holders.\n\nGonZor grants you a limited " +
        "non-exclusive license to use this software for any purpose that does " +
        "not violate any laws that apply to your person in your current jurisdiction, " +
        "subject to the following restrictions: \n\n1. The origin of this software " +
        "must not be misrepresented; you must not claim that you wrote the " +
        "original software.\n2. You must not alter the software, user license " +
        "or installer in any way unless given permission to do so.\n3. This " +
        "notice may not be removed or altered from any distribution.\n4. You " +
        "may not resell or charge for the software.\n5. You may not reverse " +
        "engineer, decompile, disassemble, derive the source code of or modify " +
        "[or create derivative work from] the program without the express " +
        "permission of GonZor.\n6. You must not use this software to engage " +
        "in or allow others to engage in any illegal activity.\n7. You may " +
        "not claim any sponsorship by, endorsement by, or affiliation with " +
        "GonZor228.com\n8. You acknowledge that GonZor owns the copyright and " +
        "all associated intellectual property rights relating to the software.\n\n" +
        " This software license is governed by and construed in accordance " +
        "with the laws of Australia and you agree to submit to the exclusive " +
        "jurisdiction of the Australian courts.\n\nBy clicking the \"I agree\" " +
        "button below, you agree to these software license terms. If you disagree " +
        "with any of the terms below, GonZor does not grant you a license " +
        "to use the software ? exit the window.\n\nYou agree that by your installation " +
        "of the GonZor?s software, you acknowledge that you are at least 18 " +
        "years old, have read this software license, understand it, and agree " +
        "to be bound by its terms.\n\nGonZor reserves the right to update and " +
        "change, from time to time, this software license and all documents " +
        "incorporated by reference. You can always find the most recent version " +
        "of this software license at GonZor228.com. GonZor may change this " +
        "software license by posting a new version without notice to you. " +
        "Use of the GonZor?s software after such change constitutes acceptance " +
        "of such changes.\n\n1.\tOwnership and Relationship of Parties.\n\nThe " +
        "software is protected by copyrights, trademarks, service marks, international " +
        "treaties, and/or other proprietary rights and laws of the U.S. and " +
        "other countries. You agree to abide by all applicable proprietary " +
        "rights laws and other laws, as well as any additional copyright notices " +
        "or restrictions contained in this software license. GonZor owns all " +
        "rights, titles, and interests in and to the applicable contributions " +
        "to the software. This software license grants you no right, title, " +
        "or interest in any intellectual property owned or licensed by GonZor, " +
        "including (but not limited to) the software, and creates no relationship " +
        "between yourself and GonZor other than that of GonZor to licensee.\n\n" +
        "The software and its components contain software licensed from " +
        "GonZor. The licensor software enables the software to perform certain " +
        "functions including, without limitation, access proprietary data " +
        "on third-party data servers as well as GonZor?s own server. You agree " +
        "that you will use the software, and any data accessed through the " +
        "software, for your own personal non-commercial use only. You agree " +
        "not to assign, copy, transfer, or transmit the software, or any data " +
        "obtained through the software, to any third party. Your license to " +
        "use the software, its components, and any third-party data, will " +
        "terminate if you violate these restrictions. If your license terminates, " +
        "you agree to cease any and all use of the software, its components, " +
        "and any third-party data. All rights in any third-party data, any " +
        "third-party software, and any third-party data servers, including " +
        "all ownership rights are reserved and remain with the respective " +
        "third parties. You agree that these third parties may enforce their " +
        "rights under this Agreement against you directly in their own name.\n\n" +
        "2.\tSupport and Software Updates.\n\nGonZor may elect to provide " +
        "you with customer support and/or software upgrades, enhancements, " +
        "or modifications for the software (collectively, \"Support\"), in its " +
        "sole discretion, and may terminate such Support at any time without " +
        "notice to you. GonZor may change, suspend, or discontinue any aspect " +
        "of the software at any time, including the availability of any software " +
        "feature, database, or content. GonZor may also impose limits on certain " +
        "features and services or restrict your access to parts or all of " +
        "the software or the GonZor228.com web site without notice or liability.\n\n" +
        "3. \tFees and Payments.\n\nGonZor reserves the right to charge fees " +
        "for future use of or access to the software in GonZor?s sole discretion. " +
        "If GonZor decides to charge for the software, such charges will be " +
        "disclosed to you 28 days before they are applied if such fees will " +
        "affect your use of the product.\n\n4.\tDisclaimer of Warranties by " +
        "GonZor.\n\nUse of the software and any data accessed through the software " +
        "is at your sole risk. They are provided \"as is.\" Any material or " +
        "service downloaded or otherwise obtained through the use of the software " +
        "(such as the \"plug-in\" feature) is done at your own discretion and " +
        "risk, and you will be solely responsible for any damage to your computer " +
        "system or loss of data that results from the download and/or use " +
        "of any such material or service. GonZor, its officers, directors, " +
        "employees, contractors, agents, affiliates, assigns, and GonZor?s " +
        "licensors (collectively ?Associates?) do not represent that the software " +
        "or any data accessed there from is appropriate or available for use " +
        "outside the Australia.\n\nThe Associates expressly disclaim all warranties " +
        "of any kind, whether express or implied, relating to the software " +
        "and any data accessed there from, or the accuracy, timeliness, completeness, " +
        "or adequacy of the software and any data accessed there from, including " +
        "the implied warranties of title, merchantability, satisfactory quality, " +
        "fitness for a particular purpose, and non-infringement.\n\nIf the " +
        "software or any data accessed there from proves defective, you (and " +
        "not the Associates) assume the entire cost of all repairs or injury " +
        "of any kind, even if the Associates have been advised of the possibility " +
        "of such a defect or damages. Some jurisdictions do not allow restrictions " +
        "on implied warranties so some of these limitations may not apply " +
        "to you.\n\n5. \tLimitation of liability.\n\nThe Associates will not " +
        "be liable to you for claims and liabilities of any kind arising out " +
        "of or in any way related to the use of the software by yourself or " +
        "by third parties, to the use or non-use of any brokerage firm or " +
        "dealer, or to the sale or purchase of any security, whether such " +
        "claims and liabilities are based on any legal or equitable theory." +
        "\n\nThe Associates are not liable to you for any and all direct, incidental, " +
        "special, indirect, or consequential damages arising out of or related " +
        "to any third-party software, any data accessed through the software, " +
        "your use or inability to use or access the software, or any data " +
        "provided through the software, whether such damage claims are brought " +
        "under any theory of law or equity. Damages excluded by this clause " +
        "include, without limitation, those for loss of business profits, " +
        "injury to person or property, business interruption, loss of business " +
        "or personal information. Some jurisdictions do not allow limitation " +
        "of incidental or consequential damages so this restriction may not " +
        "apply to you.\n\nInformation provided through the software may be " +
        "delayed, inaccurate, or contain errors or omissions, and the Associates " +
        "will have no liability with respect thereto. GonZor may change or " +
        "discontinue any aspect or feature of the software or the use of all " +
        "or any features or technology in the software at any time without " +
        "prior notice to you, including, but not limited to, content, hours " +
        "of availability.\n\n6. \tControlling Law.\n\nThis software license " +
        "and the relationship between you and GonZor is governed by the laws " +
        "of Australia without regard to its conflict of law provisions. You " +
        "and GonZor agree to submit to the personal and exclusive jurisdiction " +
        "of the courts located within Australia. The United Nations Convention " +
        "on the International Sale of Goods does not apply to this software " +
        "license.\n\n7.\tPrecedence.\n\nThis software license constitutes the " +
        "entire understanding between the parties respecting use of the software, " +
        "superseding all prior agreements between you and GonZor.\n\n8.\tSurviving " +
        "Provisions.\n\nSections 1, and 3 through 5, will survive any termination " +
        "of this Agreement.\n\n---------------------------------------------------------------------------------" +
        "---\nIf you accept the terms of the agreements, click I Agree to continue. " +
        " You must accept the agreement to download and use the software. ");
    scroll.setBounds(new Rectangle(36, 36, 478, 305));
    this.getContentPane().add(readcheck);
    readcheck.setVisible(false);
   this.getContentPane().add(scroll);
   textscroll = new JScrollPane (scroll, JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                                            JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
    textscroll.setBounds(36,36,400,400);
      getContentPane().add( textscroll );
    this.getContentPane().add(background);
JLabel background = new JLabel();
JCheckBox readcheck = new JCheckBox();
JTextArea scroll = new JTextArea();
}Sorry about all the text for the agreement. I've tried a number of different things I got from searching the forums at different points in the code (setting the number of rows/columns, setting max and min sizes, etc etc) The code above that wraps the text I could have sworn I tried 3 times before it magically worked... I also tried using the awt component for textareas that had the scrollbars built in, but scrapped it after having even more difficulties with that one. I'm trying to get the textbox to only go down about 300 px and 300 px to the right. Using the graphical editor to change it produces a null pointer error at compile time(?!?). Can anyone help me to get the textbox to render as I want it to?
Edited by: rpk5000 on Jan 27, 2008 9:43 AM

for instance, boxlayout would work nicely with the installer frame (or dialog)
import java.awt.Dimension;
import java.awt.EventQueue;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.BorderFactory;
import javax.swing.BoxLayout;
import javax.swing.JButton;
import javax.swing.JCheckBox;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.SwingUtilities;
import javax.swing.UIManager;
public class InstalleFrame
    public InstalleFrame()
        try
            jbInit();
        catch (Exception ex)
            ex.printStackTrace();
    private JScrollPane textscroll;
    private JPanel contentPane = new JPanel();
    private JLabel background = new JLabel();
    private JCheckBox readcheck = new JCheckBox();
    private JTextArea scroll = new JTextArea();
    private void jbInit() throws Exception
        contentPane.setLayout(new BoxLayout(contentPane, BoxLayout.PAGE_AXIS));
        contentPane.setBackground(UIManager.getColor("window"));
        contentPane.setBorder(BorderFactory.createEmptyBorder(15, 15, 15, 15));
        scroll.setWrapStyleWord(true);
        scroll.setLineWrap(true);
        String text = "Copyright ? 2006-2007 GonZor228.com \n\nBy using or distributing this "
                        + "software (or any work based on the software) you shall be deemed "
                        + "to have accepted the terms and conditions set out below.\n\nGonZor228.com "
                        + "(\"GonZor\") is making this software freely available on the basis "
                        + "that it is accepted as found and that the user checks its fitness "
                        + "for purpose prior to use.\n\nThis software is provided \'as-is\', without "
                        + "any express or implied warranties whatsoever. In no event will the "
                        + "authors, partners or contributors be held liable for any damages, "
                        + "claims or other liabilities direct or indirect, arising from the "
                        + "use of this software.\n\nGonZor will from time to time make software "
                        + "updates available. However, GonZor accepts no obligation to provide "
                        + "any support to free license holders.\n\nGonZor grants you a limited "
                        + "non-exclusive license to use this software for any purpose that does "
                        + "not violate any laws that apply to your person in your current jurisdiction, "
                        + "subject to the following restrictions: \n\n\nblah, blah, blah,..."
                        + "\n\n";
        StringBuilder sb = new StringBuilder();
        for (int i = 0; i < 5; i++)
            sb.append(text);
        scroll.setText(sb.toString());
        contentPane.add(readcheck);
        contentPane.add(scroll);
        textscroll = new JScrollPane(scroll,
                JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
        textscroll.setPreferredSize(new Dimension(400, 400));
        contentPane.add(textscroll);
        JPanel bottomPane = new JPanel();
        bottomPane.setOpaque(false);
        final JButton okButton = new JButton("OK");
        final JButton cancelButton = new JButton("Cancel");
        okButton.setEnabled(false);
        readcheck.setOpaque(false);
        readcheck.setText("I have read and accept the license agreement");
        readcheck.addActionListener(new ActionListener()
            public void actionPerformed(ActionEvent e)
                JCheckBox radioBtn = (JCheckBox)e.getSource();
                if (radioBtn.isSelected())
                    okButton.setEnabled(true);
                else
                    okButton.setEnabled(false);
        okButton.addActionListener(new ActionListener()
            public void actionPerformed(ActionEvent e)
                // TODO: whatever needs to be done here
        cancelButton.addActionListener(new ActionListener()
            public void actionPerformed(ActionEvent e)
                SwingUtilities.getWindowAncestor(contentPane).dispose();
        bottomPane.add(readcheck);
        bottomPane.add(okButton);
        bottomPane.add(cancelButton);
        contentPane.add(bottomPane);
        //readcheck.setVisible(false);
        contentPane.add(background);
    public JPanel getContentPane()
        return contentPane;
    public static void main(String[] args)
        EventQueue.invokeLater(new Runnable()
            public void run()
                InstalleFrame install = new InstalleFrame();
                JFrame frame = new JFrame("Install");
                frame.getContentPane().add(install.getContentPane());
                frame.setDefaultCloseOperation(3);
                frame.setSize(550, 400);
                frame.setUndecorated(false); //**
                frame.pack(); //**
                frame.setLocationRelativeTo(null); //**
                frame.setVisible(true);
}

How to give permission to Internal client local admin rights to install applications

Dear All,
I want to give internal client rights to install application in his computer. At the same time I don't want him to login to windows server 2008 with admin rights. Could you please let me know how to do that?

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Installed application works fine for administrators, not for users - LV7.1.1

Hi,
Someone must have posted this before, but I can't find it anywhere after much searching of the knowlege base and user forums. Feel free to point me in the right direction...
I have an application that loads and plays a wav file, and applies a filter while playing it back. The user may select the filter being used from the control panel. Filtering is done in1/8 second chunks, so changes in the filter appear instantanious.
I'm using LabView 7.1.1 (i.e. 7.1 with the 7.1.1 maintainence release applied). Filters have been created with the Digital Filter Design tool in the Signal Processing toolset.
I have created an installer using the application builder in LabVIEW. The runtime engine is included in the installation, as are the filter files.
Once installed on a target machine the application works fine for anyone logged on with administrator rights/privileges. For anyone with user or guest privileges the filter either doesn't re-load or isn't applied to the wav file regardless of the user's efforts on the control panel.
The audio file is however loading and playing back.
This problem is seen on W2k, WinXP Pro SP1 and Win XP Pro SP2. I can't comment on other O/S, that's all I have available to test on.
This is tricky to debug, as in the installed application you can't view or step through the source code.
Your ideas and observations much appreciated.
Bandit

You're right Sacha, it takes almost no time to rate an answer. Only 4* for you, as the info is interesting and relevant, but in this instance I wanted to stick with read only access. These filter files are an integral part of my application, and I certainly don't want users changing them .
A little further investigation has provided the ideal fix for my needs. Burrowing down into the Read DFD coefficients.vi provided in the signal processing toolset I found the files are opened for read & write. The mode isn't actually wired, so read & write is selected as it's the default. As Windows only allows read access in this location to those with user privileges the files won't open.
I now have a modified version of Read DFD coefficients.vi that has the files opened for read only (this has to be done in 2 places). I have tested this on Win2k and XP SP2, and it works exactly as I require. This is different to the user in your other thread Sacha, as they specifically want everyone to be able to write to their files.
Perhaps it's a question for the LV developers - should the Read DFD coefficients.vi be changed to only give read access? (assuming it hasn't been changed already in V8). I'm in no place to assess the impact on other users. As the .vi is only a read function, which opens the file, reads the coefficients and closes the file again I can't see how it would be a problem though - the write access isn't required.
Thanks to all for their help on this. Problem solved, and I'm a happy bunny . (Thinks - what about some bunny smilies on the forum?)
Bandit

Cannot install applications because the certificate for .... is not valid

Hello,
We have an in house enterprise app that can no longer update. We have taken the steps outlined here. These steps include installing a SSL certificate on the server from a trusted CA (GeoTrust) that shows as valid in Safari on OSX. Also the http to https redirect has been setup and verified in Safari and FireFox. Addtionally, the plist file's XML has been manually updated to point HTTPS. New installs work on iOS 7.1 without an issue.
However, the program has automatic updates that fail with the message "Cannot install applications because the certificate for .... is not valid".
The update process works like this:
A Plist file exists on the server that contains the version number of the build on the server. The app will download the file and parse it into a NSDictionary then the verison into an NSString. If the version doesn't match the current version then the user is prompted to install updates.
When the user says yes to the prompt a UIApplication is sent the Open URL message with a hard coded download URL that looks like this:
imts-services//?action=download-manifest&url=http://www.example.com/app/Release.plist
On iOS 7.1 the user will receive the message "Cannot install applications because the certificate for example is not valid". This error occurs even thought the certificate is valid. It almost looks like the URL isn't respecing the redirect from the server.
Has anyone else seen this? Is there a work around for it? Or do I have to redeploy the app (with an HTTPS in the hard coded URL)?

kkoishi, cskimble, OS 7.1 update forced all software installation services to use the HTTPS protocol instead of HTTP. Here is Apache config that adds certificate support and code for changing links in existing *.plist files automatically: http://cases.azoft.com/how-to-fix-certificate-is-not-valid-error-on-ios-7/
More ideas on Stack: http://stackoverflow.com/questions/20276907/enterprise-app-deployment-doesnt-wor k-on-ios-7-1/22527000#22527000

Installing Application Server 10g 2 on Unbreakable linux

Hello all,
I wish to install Application Server 10g 2 on Oracle Unbreakable Linux EL5. Could someone please let me know if there are installation instructions for the App Server on EL5?
Also, when I go to [http://www.oracle.com/technology/software/products/ias/htdocs/101202.html] to download release 2 for Linux x86, the tooltip has the file named as "as_linux_x86_portal_wireless_101202_disk1.cpio". Does anyone know if this is actually the App Server???
Last, but not least, I downloaded disk 1(I'm assuming it's the correct software) and tried to "unzip" it in /home/oracle to run the Universal Installer and Oracle Unbreakable Linux doesn't recognize the file extension .cpio. So my last question then would be is Oracle Unbreakable Linux even a suitable version of Linux to install the App Server on? Because it seems strange that the software Oracle has on its website can't even be opened on their own flavor of Linux.
Any help answering my questions will be appreciated.
-Thank You,
David Wrbelis

Hi,
I did just a while ago.
If you got a joice, use Unbreakable Linux 4 (RHEL4), 10g2 on Unbreakable Linux version 5 is not officially supported by Oracle!
At least my Server was complaining about the system. After extracting the .cpio you can either use
./runInstaller -ignoreSysPrereqs
or go to redhat-release file (I'm not sure in the moment, I believe its /etc/redhat-release) and set it to version 4 instead of 5 until installation is done.
You will get an error during installation, when it appears rename libXtst.so.6.0.0 to libXtst.so.6.0 and press retry, the installation will finish successfully.
You might get an error that opmn could not start. Start it manually, the error won't appear, you can ignore it (press continue).
Your config wizards should ALL be successful!
About the file you downloaded, I was using a different one, since I only needed Forms and Reports service, you might want to have the full Server, so there are more than one correct downloads for 10g2. You need to look carefully what features you need or load full version (which would be several cds I believe).
Regards
Edited by: n00b on 19.09.2008 09:32

How to buy already installed application - namely OS X Lion?

If you try to buy already installed application, Appstore tells you it's installed and doesn't let you buy it. Only option I found is deleting the application, then you can buy it and download it anew.
But... I have OS X Lion, I bought it under one Apple ID. Now I want to buy it on another Apple ID on the same computer (I want to own the licence on other Apple ID, not reinstall OS). Is there any way to do it? Except formatting HD?
Asked same question to Apple support, but looking for help in general, so asking here also.
Thanks

I felt your pain when I purchased the mid-2011 Mac Mini to replace a dead iMac G5 last year, without doing my normal due diligence on Lion.
Like others I had the need to continue to access my finances in Quicken Deluxe 2002 (since rendered moot by Intuit's decision to release Quicken 2007 for Lion) as well as certain Excel 2004 charts that get trashed when opened in Excel 2011.
Since necessity is indeed the mother of invention, I worked out this solution: I installed Snow Leopard (with Rosetta) into Parallels 7 in Lion:
[click on image to enlarge]
Full Snow Leopard installation instructions are available here:
http://forums.macrumors.com/showthread.php?t=1365439

How to Install Application Server Control on top of AS J2EE Installation.

Hi,
I just installed AS 10g 10.1.2, upgraded it to 10.1.2.3 and applied Jul2008 CPU.
It was initially a simple J2EE install (with only J2EE and OC4J).
It seems there is no EM Application Server Control component since all attempts below failed:
http://host.domain:1156
http://host.domain:1156/em
http://IP:1156/
http://IP:1156/em
portlist.ini
Oracle Management Agent Port = 1157
Application Server Control RMI port = 1850
Application Server Control port = 1156
I am accessing the system (unix servers, etc) via vpn.
Question:
1) How do I verify if Application server control is installed or not installed.
2) How do I install Application server control if the component has not been installed
on top of AS 10.1.2.3 (base 10.1.2 install with 10.1.2.3 upgrade Jul2008 cpu)
Thanks.
Our intent is to use Application Server Control to access Workflow manager
Tried

AS Control gets installed with every install type so it should be there. Refer this for details:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/tools.htm#sthref110
If http://host.domain:1156 doesn't work, AS Control might not be up. Start it using "$OH/bin/emctl start iasconsole". Refer below (mainly point #3 below) for details on what and how to start a mid-tier instance:
http://download.oracle.com/docs/cd/B14099_19/core.1012/b13995/tools.htm#sthref110
Thanks
Shail

Build and Install application

Hi all,
Could you tell where can I find script to create exe install application.
I created workspace + application + schema with several table and now I would like to export it to an another server. I already used export application / export workspace / export CSS....throught htmlDb page, but without data. I don't want to create a Dmp export each time I need to export appliation.
TO resume If someone knows how can I create the same program like example application we have on htmldb...it'll be great
Olivier
Email ; [email protected]

Well, Oracle XE comes with Application Express
version 2.1.
Up until then you can only export the application and
the CSS / Static files / Themes.
Starting with Apex 2.2 you can also export the
required database objects and the data. But this
feature is not available in the current release of
Oracle XE.
You would have to use exp/imp or expdp/impdp or use
DBMS_METADATA to extract the DDL
(http://www.oracle-base.com/articles/9i/MetadataAPI.ph
p).
Or you could use Toad or other tools that help you
extract the ddl and the data.
Regards,
~Dietmar.You can get the database scripts and such built, you just need to do them seperately.. I would suggest getting SQL Developer installed, use it to get the DDL scripts to build you tables and database objects in a script.
Any other questions, please feel free to ask!
Thanks!
Tony Miller
Seattle City Light

Can't open some installed application in iphone 4

Help me please!
It's just a few days that i found problem opening some installed applications in my iPhone 4...when i try to open one of these, the application crash after a few seconds!
I' ve tried restarting iPhone, uninstalling and reinstalling apps....but the problem continue!
What i can do??? HELP ME PLEASE!!!!!
Thank you!!!!!!!
BYE!

Hi Mark
Silly question for you. The project you are attempting to
open in C4 isn't by chance still open in C3 is it?
I know there are issues adding a Captivate output to Robohelp
if the project is still open in Captivate which is what prompted me
to ask.
Cheers... Rick

After Installing Application Server - Problem connecting to my Databases

I have 10g installed on my Windows server, and have no problems connecting to my database(s). After I install Application Server 10g, I am no longer able to connect to any of them, as if the TNSNAMES.ORA file is no longer configured correctly. I am training myself on these applications. Anyone have any suggestions what is happening behind the scenes?
Thank you,
Daniel Nadler

After deploying a jsf application via the web interface of the application server enterprise manager I tried to connect to the 10g database - and it failed with the same error as yesterday?
I really don't unterstand what is going on. I would really appreciate it if someone could point me out where to start digging for a solution / unterstanding of the problem.
Quoting this thread (installing db on same server as AS): 10gAS and Database Server on the same machine
>
Yes, you can do this. Here are some guidelines:
(1) Make sure your system requirements are sufficient to handle the application server and the database. The recommendation is to add the AS system requirements and the DB system requirements together.
(2) Install each product into its own Oracle home. For example:
- Oracle Home 1: AS Mid-tier
- Oracle Home 2: AS Infrastructure (including Metadata Repository)
- Oracle Home 3: Database
(3) If your AS installation includes a Metadata Repository, make sure that the
Metadata Repository and the database use a different SID and global db name.
(4) It is possible that the Metadata Repository and the database can share
port 1521. Review this information before you start your AS installation:
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#CIHEBFDG
The installation guide under (4) tells me that I don't have to worry since I use a new listener version.
To complete the confusion: on my virtual test machine oracle 10g and oracle AS 10g work fine side by side?? Perhaps because I did a Standard Edition install of the database (on the real machine I used Enterprise Edition)? Is there a way to figure out what kind of install I did?
Lots of questions, any help or links are really appreciated! Thanks in advance!
------------------ EDIT -------------------
Whoops, I might had a problem with a not correctly shut down database (just shutted windows down without killing the instance - didn't know this wasn't ok). Still evaluating the issue. But to say the least, it seems the application server has nothing to do with my problem :)
Message was edited by:
mathias.ringhof

Download & install application over http

Hi, All !
I'm novice at ME so don't be cruel :). The question is following:
I want to download and install application (some.jar) from server. Could the following code help me? ( Actually I had thought that device proposed to download file after (*) line, but It didn't ):
HttpConnection conn;
InputStream is;
DataInputStream dis;
int status;
try {
(*) conn = (HttpConnection) Connector.open(downloadURL);
status = conn.getResponseCode();
if (status != HttpConnection.HTTP_OK)
System.out.println("failed");
...et c.
It would be great if someone will advise me a scheme to realize.
Thanks in advance, Vadim.

if you want to install jar
you need to deploy it in public server
see here
http://developers.sun.com/techtopics/mobility/midp/ttips/wtkota/
and if netbeans you use
http://www.netbeans.org/kb/50/j2me-app-server.html

Installing Applications Question

Similar Messages

Maybe you are looking for