Installing arch with less than 64mb RAM...

Hi!
Maybe I will need to install linux to old machines, pentium 2, with 64mb ram maximum...
I love archlinux... but, there is any way to install it with that ram amount?
(as I read that the new livecd install needs at least 192mb ram?)

Sorry, I didn't read your post correctly
This way, I guess you'll find this thread disappointing
http://bbs.archlinux.org/viewtopic.php?id=36615
Last edited by jlcordeiro (2009-06-03 05:00:02)

Similar Messages

Can you install snow leopard on Intel based mac with less than one GB of ra

As the subject relay I have an Intel mac mini with 750GB of ram? will th einstaller let me install Snow Leopard?

No, the installer will not let you install Snow Leopard on an Intel Mac with less than 1 GB of RAM. Even if it did, performance would be unacceptable & the OS would probably be unstable.
If you want to run Snow Leopard you will need to upgrade to at least 1 GB of installed RAM. If you want it to run efficiently, you should install more. Typically, 2 GB will get you most of the benefits of a larger memory space but if your Mac supports more & you want the best possible performance, install the maximum the Mac can handle.

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Please Help :( iMac 20" refuses to boot up with anymore than 1gb ram?

Please Help iMac 20" refuses to boot up with anymore than 1gb ram? It was fine 4 days ago and had been working with a 1gb stick in one slot and a 2gb stick, which had replaced the orignal 1gb stick that I got it with, in the other and it had shown 3gb of ram and was working just fine with that since November? It went to sleep briefly 4 days ago while I was waiting on a customer and I came back to try to wake it up and it never would forcing me to hard boot it. When I did that it would only go to a black screen with a solid white light on the power indicator. Over and over again and same thing. I read and tried every suggestion I could possibly find in this and a few other mac forums to no avail.
I finally after reading about RAM issues etc. I decided to power off and take out the ram sticks and try them one at a time in each slot. So I took out the 2gb stick and did the SMC reset and it would boot up and work just fine with the 1 gb of ram. So then I went through the same process with the 2gb stick and it would not boot up only go to a black screen with white solid light again (NOT flashing). So then I tried the other original 1gb I had replaced with the 2gb and it worked just find like the other 1gb. So then I tried just 1gb stick in the other ram slot (back facing one) and with just the 1gb strip it booted up and worked fine. Tried it with the other 1gb stick and once again that one too worked just fine. So I determined it wasn't the slot itself I thought? I then tried the 2gb in the back slot and it would not boot only go to the black screen white solid light deal like before. So I thought well ok it's obviously the 2gb ram must have somehow went bad (even though I have only had it since November) and I thought well I will just use the (2) 1gb sticks in each slot and then that will at least give me 2gb because only 1gb really ***** LOL. So I proceeded to go through the same shut down process installed both sticks (I always push them to I feel them click and my fingers have a nice indention on them) reset the SMC and turned the power one and.... It would only go to the black screen with white solid light on power indicator???? I went through the same above process at least 3 times and again today a few times and I can't figure it out and I tried to search and search and I couldn't find anything like what I am experiencing.....What happened? Please help this slow Imac is killing me. It will work with 1gb ram only nothing more? Here are the specifics of my Imac.
It is a 20" Late 2006 Intel Core 2 Duo 2.16 ATI Radeon X1600 256 MB graphics card and Ram with now only 1gb (did have 3gb) and I am running OSX Lion 10.7.5
When I go to system report and go under memory it shows this:
BANK 0/DIMM0:
Size:          1 GB
Type:          DDR2 SDRAM
Speed:          667 MHz
Status:          OK
Manufacturer:          0xCE00000000000000
Part Number:          0x4D342037305432393533435A332D43453620
BANK 1/DIMM1:
Size:          Empty
Type:          Empty
Speed:          Empty
Status:          Empty
Manufacturer:          Empty
Part Number:          Empty
Serial Number:          Empty
Any help I can get would really be appreciated. Thanks in advance
ALSO...Here is also a pic of the system log right before it happened. It even changed the date to 07/2014????
I have some more if needed???????????????
<Personal Information Edited by Host>

The Memtest just completed and came back like this? It only test the single 1gb chip because anything more in this computer it won't go past the black screen with solid white power light.
Memtest version 4.22 (64-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004-2008 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
NOTE: No command-line arguments have been specified
Using defaults: Test all available memory, one test pass, no logfile
Mac OS X 10.7.5 (11G63) running in multiuser mode
Memory Page Size: 4096
System has 2 Intel core(s) with SSE
Requested memory: 250MB (263086080 bytes)
Available memory: 250MB (263086080 bytes)
Allocated memory: 250MB (263086080 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 125MB (131543040 bytes) starts at local address 0x0000000101000000
Buffer B: 125MB (131543040 bytes) starts at local address 0x0000000108d73000
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 250MB region...
Stuck Address       : ok
Linear PRN          : ok
Running comparison tests using 125MB buffers...
Random Value        : ok
Compare XOR         : ok
Compare SUB         : ok
Compare MUL         : ok
Compare DIV         : ok
Compare OR          : ok
Compare AND         : ok
Sequential Increment: ok
Solid Bits          : ok
Block Sequential    : ok
Checkerboard        : ok
Bit Spread          : ok
Bit Flip            : ok
Walking Ones        : ok
Walking Zeroes      : ok
All tests passed! Execution time: 362 seconds.
logout
[Process completed]
Seems Okay I guess?

Small office with less than 10 APs

What is best way to handle or setup wireless connection for a small branch office with less than 10 APs? Management doesn't want to spend any money to install a local WLC. Those APs will communicate back to two WLC 5508 in Data Center.
Should I use local switch or flexconnect? Any one has experience about pro and con between those two methods. Ping time between branch office and Data Center is less 60 ms.
Thanks,

What is the link bandwidth between those two site. If you have enough bandwidth then you can go for local mode deployment, but all CAPWAP traffic has to come Data Centre WLC (ie central switching)
If you would like to terminate branch traffic at branch switch, then FlexConnect local switching is the way to go.
HTH
Rasika
**** Pls rate all useful responses ****

Migration stalled with "less than a minute remaining"

This issue was discussed back in April, but no definitive solution was found.
I installed Mountain Lion on an older MacBook Pro and all went well until I got to the Setup Assistant after restart. The migration of my files from a Time Machine backup stalled with "less than a minute remaining" while "transferring files to support applications". Apparently this is a known issue that affects older Macs upgrading from Snow Leopard. I have two questions about this:
1. Can anyone suggest a fix or workaround for this problem? In the earlier thread, some people repeated the file transfer several times with exactly the same results. One person evidently had better luck when he started over and deselected everything but Users on the transfer options screen; but it obviously requires alot of extra work on the user's part to reinstall every application.
2. What is the best way to abort the stalled transfer without risk of damaging the data on my Time Machine backup drive? Mountain Lion refused to install on my startup drive until I erased it, so my Time Machine backup is the only copy I have of my data. Since Setup Assistant is not frozen, I can hit command-Q and Setup Assistant offers to shut down; but is the data on my backup drive at risk if I shut down and start over?
Thanks!

Has your Migration Assistant actually crashed? I am restoring my computer from a hard drive failure and the following dialog has been displayed for the last 12 hours. I clicked on the App in the dock to see if it was displaying as crashed, it doesn't appear to be.
I checked the "Get Info" on the Hard Drive Volume, and it is showing a very slow progression of used bytes. I suspect the transfer is still continuing, just very slow as I have so much data. I think it is a matter of quanity of files rather than "file size".
Should be interesting to see in another day or so to see if it completes. :-)

Gtx 570 twin frozer buggy artifacts with less than 2 year usage

Hey friends,
I have purchase MSI geforce 570 gtx twin frozer after reading too many good things about it. MSI is famous as being the best quality brand for VGA boards but i had no luck with my first purchase of the brand. I'm currently using it now, it allows me to use web and other low resources apps with no problem but any game that I play, after 2 -3 mins of playing, it gets my screen full of weird colorful artifacts and freezes. Sometimes it sends me to desktop with a message "the display driver stopped working and recovered itself" (something along these lines, i use windows in portuguese).
What can be done in this case? Did i just lose my VGA with less than 2 years use? I'm searching for the manuals/box for it to check the warranty period, but until i find it could you please tell me if i still can get help from warranty?
Thanks in advance.
Hardware: asus p5e3 deluxe wi-fi , 8gb corsair dominator DDR3 , win 7 x64

>>How to contact MSI.<< to ask for rma procedure.
To check >>use MSI Afterburner<< and reduce gpu clockrate to 732Mhz or below and retry. If no help >>Clear CMOS<< and retry. If still no help try with a singsle stick of ram. Test both sticks individually.

Encoding issue with " " Less than sign

Hello Experts,
I am working on Receiver Webservice scenario where I am facing issue with "<" less than sign. SAP XI system automatically replace it with "<" sign. I can see the changed value in Audit log of communication channel.
Web service is not able to accept the data and I can see error message in audit log
SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAPEXCEPTION - soap fault: Server was unable to read request. ---> There is an error in XML document (1, 573). ---> The specified node cannot be inserted as the valid child of this node, because the specified node is the wrong type._
When I check the payload in audit log I can see the XML structure properly but as I open it in Notepad I can see character code "<" instead of u201Cless than <u201D symbol.
Audit log XML file is as given below
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:TurnaroundDetail xmlns:ns1="http://isotrak.com/webservices">
<ns1:sessionid>3f2f2592-39d5-456e-8cf2-5d7ee81402c8</ns1:sessionid>
<ns1:data><Request xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><TurnaroundDetail><PlannedJobDepartureDatesFrom="2011-03-01T12:01:23.00" To="2011-03-01T12:07:10.00"/><DepotReference DepotReference="EASTLEIGH"/><DepotReference DepotReference="CHANDLERS"/></TurnaroundDetail></Request></ns1:data>
</ns1:TurnaroundDetail>
When I open it in notepad I can see converted value
<?xml version='1.0' encoding='utf-8'?>
<TurnaroundDetail xmlns='http://isotrak.com/webservices'><sessionid>dcc4adcd-ce8f-403d-a1cf-01fcc5aab066</sessionid><data><Request xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><TurnaroundDetail><PlannedJobDepartureDatesFrom="2011-03-02T08:28:29.00" To="2011-03-02T08:38:09.00"/><DepotReference DepotReference="EASTLEIGH"/><DepotReference DepotReference="CHANDLERS"/></TurnaroundDetail></Request></data></TurnaroundDetail>
I hope this is not caused due to AnonymizerBean configured in receiver SOAP comm channel.
anonymizer.acceptNamespaces http://isotrak.com/webservices ''
anonymizer.encoding ISO-8859-1 (also tried utf-8)
anonymizer.quote ''
Could you please suggest if I can get rid of "<" character and get < less than sign? Or it is obvious behaviour by SAP XI system w.r.t Encoding and Receiver end needs to decode this character?
Note: As per Web service requirement whole XML data to be processed by webservice is populated in single Data field. As here we are populating whole XML data file in one field named data
Thanks in advance.
Vinit.

Simply typing "Test <test> test" into a frame and exporting that yields
<ParaStyle:Body>Test \<test\> test
and reading it back into ID gives the expected result.

What to do? Operating system update stalled - message installing software update less than a minute

What to do? Operating system update stalled - message "installing software update less than a minute" but that has lasted hour

Press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly to restart.

Issues with less than and grater than condition in prompts in OBIEE 11g,

Hi all,
i am facing the prombles with less than grater than conditions in OBIEE 11g.
i created two date prompts with presentation variables datefrom and dateto
and i used these prompts in fileters like this using grater than and less than symbol.
filters are as below:
lastupdated date is grater than or equal to @{datefrom}{1/1/1950}
lastupdated date is less than or equal to @{dateto){1/1/1950}
and created two prompts
creation datefrom >=
creation dateto<=
when i passing the dates 05/12/2004 and 05/12/2005 in prompts after clicking the apply button in OBIEE 11g it feches all the records but i need records between these dates. and one more thing is after clicking apply button the two date fields getting the same date..
am i do any thing wrong in the above ???
please let me know friends..
waiting for ur replyyyyyy..
Thanks
Edited by: BI_user on Oct 12, 2011 2:10 AM

Hi,
Create date prompts with operator as = not >= (or) <= as you need to save that value in presentation variable and you are filtering report using those variable filters.
Regards,
Srikanth

Albumart for albums with less than 5 songs?

So i REALLY would like to see the albumart on albums (for instance EP's, singles) with less than 5 songs. Is there any Terminal line to do this?

When iTunes does not pick up artwork or the wromg artwork I usually just google image the albume and copy artwork, 500 x 550 is perferred if you want to use jukebox or large image, don't bother with anything under 300 x 300 as it will be blury. Go back into iTunes highlite all the songs on the album, right click and paste into the album art square.

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
if that doesn't work then connect to a computer and try to open the device in itunes

I refuse to buy nokia phone with less than 1500 mA...

I realized this after latest addition of E52 with 1500 mAh battery So far, i have purchased about 30 or so Nokia handsets during past 14 years.
The battery Life of E52 is just marvelous. simply amazing. Cant imaging how I survived 14 years exclusively using Nokia phones with less than 1500 mAh battery.
The new touch screen phones like the latest N-800 with HDMI Port has only 1200 mAh battery!!! why not put a 2100 mAh battery on such a beauty? people are going to use the phones more than just making call, this demands more battery power. 1200 mAh battery will last less than a day.... People, expecially myself will be dissapointed in using such a phone with so less battery power.
Granted these days processors are more efficient, but wont it be good if Nokia puts little more juice to their most beautiful touchscreen handsets?
Having less battery power is the main reason i have been holding off my purchase of touch screen phones like N900, and now this N-8.
Please Nokia, please try to put the best in it's class battery for the best in it's class phones.
Even the iPhone 4G has (1200 mAH) less capacity battery than my E52.
My E52 goes on and on for weeks together without charging. On heavy usage it easily lasts for 1 full week!... (never been like this for any of the previous nokia phones...) especially the top of the end models like my old N82
So far, I am very happy with my E52. Wish some thing similar i.e. slim E series comes with touch screen soon.

Hello kmschmehl-
I cannot truly express how sorry I am to hear about your total experience with the delivery and subsequent return of this fridge. It certainly sounds as though Best Buy has put you through the ringer and I can absolutely understand your disappointment and anger with us.
While it sounds like some aspects of the purchase and delivery were at least adequate, any opportunity that we had to show you why you should purchase from Best Buy went by the wayside. However, Best Buy is not in the business to provide merely adequate experiences and I am saddened that this is the best we could summon for your purchase. We are capable of better than what we showed you.
I’m glad to hear that you have finally been able to get the assistance you needed to get this refund resolved and make you whole again. In addition, I do hope that you are enjoying the fridge you purchased at Lowe’s. I certainly wish that it had been a Best Buy fridge in your kitchen instead, but I can understand why you chose to go with another retailer.
It sounds like the store has you in good hands once your card arrives and I believe that the reason they need the physical card is that the credit card company requires it to be physically scanned for returns. Hopefully you will not run into any further issues with this refund and it’s my hope that sometime in the future, you might grant us another chance at your business. I will be sending you a Private Message with some additional details as well. To check your Private Messages, please log into the forum and click on the envelope in the upper right hand corner.
Please let us know if you run into any further concerns.
Sincerely,
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Trying to download Mountain Lion, I have 2 accounts, both with less than $20 for the new App. Together they add up to $20. Can I merge account totals?

Trying to download Mountain Lion, I have 2 accounts, both with less than $20 for the new App. Together they add up to $20. Can I merge account totals?

I have now spoken to Apple about my problem and they told me to explain the situation to my Broadband service provider British Telecom (BT).
For reasons not explained, BT suggested the problem lies with the Router hardware they have supplied (BT Business Hub - 2701HGV). Although it is relatively new there is something that prevents it from downloading Mountain Lion???
They are posting me a new one which will not arrive for 2 days. I will let you know if the new router solves this issue.

HT201269 ive recently got a new iPhone 5s due to my old one breaking, it has been sync'd but has now been showing the black apple loading screen for the last 3 hours with less than a quarter of the bar filled. what do i do?

ive recently got a new iPhone 5s due to my old one breaking, it has been sync'd but has now been showing the black apple loading screen for the last 3 hours with less than a quarter of the bar filled. what do i do?

Take it back to where you purchased the device and get another device.

Installing arch with less than 64mb RAM...

Similar Messages

Maybe you are looking for