Installing AS: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during setup IAS for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Hi,
Thank your for answering.
Actually, i don't have this issues anymore, because I choice to intall this on RHEL4.6.
My DSA process was started because, i started it manually to see what will happen.
Now I succeeded for the installation, I have a new probleme during the configuration with OUI CA.
The OMS configuration failed and the file configToolFailedCommands show that:
oracle.sysman.emcp.agent.AgentPlugin failed.
Have you any idea ?

Similar Messages

Installing Grid console: special problem with OPMN Process Manager...

Hi everybody,
Actually, i'm trying to install a Grig control 10.2.0.1 on an existing database (10.2.0.1 patched to 10.2.0.4). OS is RHEL5.
I have the following problem during for 3 days.
Note that my database is open and that didn't succeed in installing some rpm's, especially pdksh...
Here is the warning box:
The OPMN Process Manager failed to start.
Please check the logs in the
/u00/app/oracle/product/10.2.0/oms10g/opmn/logs directory for the cause of failue. Once the cause of the failure has been remedied, start OPMN manually and click Retry.
I start manually opmn and obtain this:
Processes in Instance: EnterpriseManager0.vmbasegrid
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | 6106 | Alive
HTTP_Server | HTTP_Server | 5955 | Alive
LogLoader | logloaderd | 6137 | Alive
dcm-daemon | dcm-daemon | 6189 | Alive
OC4J | home | 5962 | Alive
WebCache | WebCache | 5982 | Alive
WebCache | WebCacheAdmin | 5963 | Alive
But after clicking on retry, the same warning appears again!
By watching logs for each process at $ORACLE_HOME/opmn/logs, i didn't se any errors
moreover opmn.log is empty.
I already set $ORACLE_HOME, $PATH, $LD_LIBRARY_PATH.
I didn't find solutions nowhere so that's why I'm posting here.
Ideas and direction will be very helpful for me.
Thank you a lot,
Daniel.

Please paste the install action log for this install

Problems with OPMN process (very unstable) on Windows Vista

I am running SOA on Windows Vista(V10.1.3.1). I am having the following problems with the OPMN process
 
1) Shuts down when idle
 
2) After crashing I try to restart SOA Suite using the command line>opmnctl startall
 
I get the error message..."Unable to Open Service with error Access is denied."
 
If I use the command line>opmnctl start
 I get the error message but OPMN process starts????
 
3) but then...Crashes when trying to Deploy a webservice through Application Server Control.
 
Anyone else having these sort of issues and have come across a fix?
 
regards
 
Paul P

I'm also having the same problem (on XP) on 10.1.3.4 I'm guessing this is a security issue but can anyone tell me how this can be resolved.
It appears to work fine as Admin but regular users without Admin rights have the above issue.

RE:The OPMN Process Manage failed to start.

Hi everybody,
Can anybody help with following issue below, please?
I just install Oracle unbreakable linux operating system. I am trying to install infrastructure on it. All the time i am get error "The OPMN Process Manager failed to start". I changed the system requirement like it stated to the installation manual. But I am still getting same error.
I will appreciate to one will give me solution for this problem.
Thank,
Arthur

Poa,
The operating system is Red Hat Enterprise version 4 ( 86-64 bits). My computer specifications: Process is Dual core AMD x86 64bits, and RAM is 2GB. I am trying to install Oracle Application Server 10g Release 2 (10.1.2). I checked all the prerequisite before attempting installation.
Thank you,
Arthur

OPMN Process Manager failed to start - libmodapi.so libclntsh.so not found

Hi all,
I am completely new to Oracle in its entirety. I am trying to install Oracle Enterprise Manager Grid Console 10.2.0.1.0 on Oracle Enterprise Linux 5.1 through the OUI using the new database install. When I get to setting up the Oracle Application Server, it tells me the OPMN Process Manager failed to start, tells me to check the logs in /oms10g/opmn/logs, and to start OPMN manually before hitting retry.
The log files in that directory do not seem to contain any errors.
When I run ./opmnctl stopall, ./opmnctl startall, ./opmnctl status, I get no obvious errors, and then the following:
DSA ~ DSA ~ Down
HTTP_Server ~ HTTPServer ~ Alive
LogLoader ~ logloaderd ~ Down
dcm-daemon ~ dcm-daemon ~ Down
OC4J ~ home ~ Alive
WebCache ~ WebCache ~ Alive
WebCache ~ WebCacheAdmin ~ Alive
When I do ./opmn start I get the following:
./opmn: error while loading shared libraries: libmodapi.so: cannot open shared object file: No such file or directory
When I do a ldd ./opmn I get the following errors:
libmodapi.so => not found
libclntsh.so.10.1 => not found
I am assuming my problem is that these two libraries are not linked in. I have looked through the forums, and found closely related threads, but none that seemed to help, most notably changing my PATH. If anyone has any suggestions, I would welcome them. Thanks for your help.
Sincerely,
Don

Hi All,
We all agree that best practice involves a test installation. My original post was about a problem I was having with the creation of my test bed. I did create my own manual, which I am sure is not the best manual ever created, but does work to get the software installed. If it is proven out, I will post it to try and return something to the community.
In order to do this, I needed to read thousands of pages of documentation so far, which does not even scratch the surface of the total amount on OTN. I am still revising my instructions as I find that the documentation commonly assumes the reader has been installing Oracle for some time and is fully aware of all the appropriate acronyms and the entire logical and physical structure of the database. In order to just read many of the documents, I had to draw out a map of Oracle on a whiteboard as I went. As a systems administrator, should I have to search through all those papers, manuals, the web, etc. and try to gain an advanced DBA understanding to get a working default installation? Perhaps it seems like I am just a new user who is whining, but how many programs can you think of where this type of effort is required?
In looking at the relationship between the DBA and the Systems Administrator, where should we draw a line between their tasks?
Should the DBA have to learn how to assess appropriate server hardware, and then install and administrate every flavor of Windows, UNIX, Linux, etc. in any given environment? Should a DBA be required to build a Linux kernel, configure Active Directory, or install Solaris before installing Oracle?
Should the Systems Administrator have to learn the nuances of installing and optimizing Oracle databases in order to just put the base software on the system and configure the kernel so it is ready for a DBA?
More interesting, as stated above, I could hand you the Gentoo Handbook, and without knowing a single thing about Gentoo Linux, you would have a default installation of the Gentoo OS. You could also grab step-by-step instructions for a default installation of MySQL on Gentoo, or a myriad of other programs, for that matter. This would hardly replace the Gentoo systems administrator or MySQL DBA, but it does serve a very valid purpose of enabling the systems administrator and DBA. Shouldn’t Oracle have something similar?
I would think the Systems Administrator knowledgeable in the OS and Kernel should be able to perform the first half of the installation task where they are more likely to be an expert, and then allow the DBA to create and optimize the databases they install, which they in turn can spend years learning how to do. Time that the DBA spends learning the OS or time the Systems Administrator spends learning Oracle is valuable in the long run, but it is also extra time to get the initial database up and running. One of the largest reasons IT personnel exist at all is to keep users from having to spend too much time learning about their computers to get their work done. Shouldn’t this also translate between IT groups?
Databases are one of the few software installations that systems administrators commonly don't have to maintain on corporate servers. The best comparison I know of is web services. In this manner web servers are very similar, and are commonly installed by a team as well. I am perfectly capable of creating a default install of Apache, Tomcat, or IIS from step-by-step instructions provided by Apache or Microsoft without much more tailored information than the IP address and system name we are going to use to fill in the blanks during the installation.
While I have performed the role of sole IT staff at a small software engineering company, and have therefore been the SysNetWebSecDB admin hydra in the past, in larger companies there seems to be no problem with having the system administrator create a default installation of Apache or IIS, having the network team configure the switches and DMZ, and having the web team customize the server and design the site without each of them having to know everything.
So the above is a good idea and I would encourage
them to do it because after that, it makes them
stonger than when they use an already completed one
to install.Sometimes there is time to sit down and read all the instructions and become a more robust IT professional. Sometimes there is only time to read the Getting Started section and you have to read the full instructions and optimize later if there is time. Sometimes you have outside influences that mean it has to get done in less time than it should, whether or not the justification for rushing is reasonable.
Should I plan to read every knowledge base article ever published by Microsoft in order to create a test bed installation of Windows 2008? Honestly, I’d still be reading the NT4 docs.
Not only does not every business have a DBA, or the money to hire one, sometimes the business does not want to do so, or sometimes the security is such that the DBA is not part of the unit allowed to utilize administrative access on the servers. That doesn’t mean they don’t need a database tomorrow.
As an IT professional, I will never be able to come close to encompassing the amount of knowledge I actually could use to do my job. I try to specialize in a few areas so that I have the ability to keep up with the exponential rate of IT expansion, but I basically consider a vast part of my job being constantly thrown into the deep end, and, fair or not, getting things done anyway. Hopefully that makes me good at my job. The question is how much time and effort I should need to apply before I can get to a reasonable starting point where everyone else can do their work too.
There
is normally no single document to achieve or complete
and installation unless the bespoke type. Apart from
the Install Guide, there could be Readme, Release
notes, Adendum etc. While I noted in a previous post that I shouldn't be too hard on Oracle in trying to document such a massive effort, that doesn’t mean that their documentation doesn’t need work. Why is the documentation for a single product spread out over tens of thousands of pages? It should be obvious that this has resulted in redundant and often conflicting documents, including the dozen readme documents in the installation files, the readme documents in the installed files, the install guide, the readme and addendum for each of those, the release notes for each of those, and a new set for each patch.
Obviously, for any installation, I need to complete a document for my own environment that contains the proper network configuration for our own LAN, or the proper partitioning. I do this for any program. Oracle needs me to change the name of the OS install to get their installer not to error out on their own OS. If OFA is so desirable, why not make the default install explain and follow OFA? Basic issues like this are highly avoidable, and shouldn’t be seen by the end user, even if in this case the end user is a highly technical audience capable of adjusting.
It will hard to get a single document because they
will be platform dependent and what someone did in
their install, may not always work everywhere.Again, please note that Oracle has "released" an OS that they intend for people to use on their Oracle validated hardware as a premier platform for their Oracle database. It isn't a stretch to feel that Oracle should then be able to provide valid, step-by-step instructions for a default installation of their own software, on validated hardware, on their own OS. I’m not expecting an optimized and populated database, but if the hardware, OS, and software are all under Oracle’s control, there aren’t really any variables other than machine name and IP address for a default install.
Hopefully my current knowledge will work for the time being, and I will be able to optimize appropriately in the future as I can.

JDeveloper 11g with BPEL process Manager 10.1.3.1.0

Hi,
Here is my requirement.
To develop a simple web application which talks to a Business work flow developed using BPEL.
The Setup I wanted to work on
JDeveloper 11g.
BPEL process Manager 10.1.3.1.0.
Now the problems seems to be is that JDeveloper 11g doesnt seem to be having BPEL Designer ,is there is plugin for me to get BPEL Designer in my JDeveloper 11g.
Could some body tell me if i can use JDeveloper 10.1.3.1.0 with BPEL process Manager 10.1.3.1.0 if yes then
how do we configure the JDeveloper 10.1.3.1.0 to point to BPEL process Manager 10.1.3.1.0.
Regards
Harish

Huh? In the subject you're talking about BPEL 10.1.3.x and now you're asking for 10.1.2?
Anyway, you need the corresponding JDeveloper version to develop the BPEL workflow, ie JDev 10.1.3.4 for BPEL 10.1.3.4 or JDev 10.1.2. for BPEL 10.1.2.
You can install as much as possible JDeveloper versions on your machine. As long as they are installed in a different home. I usually have three to six installations.
Develop your workflow in the JDev matching the BPEL version and develop your UI in JDev 11g calling the BPEL as a WebService.
--olaf

The OPMN process manager failed to start

During the install of the 10g Infrastructure component I get the following
error
The OPMN process manager failed to start. Please check the logs in
/home/oracle/Infrastructure/opmn/logs directory for the cause of failure.
Once the cause of failure has been remedied, start OPMN manually and click
retry.
I've checked the status of OPMN with 'opmnctl status' and it show me that the OPMN is running
What is the prb?
thanks.

It could have taken few seconds to get up and OUI would have erred before that.
As long as all services are coming up, you have nothing to worry. If you want, you can increase logging levels in opmn.xml for more details

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

Installing oracle ops center with a Customer-Managed Database.

Hi Everyone,
I am trying to install oracle ops center with a Customer-Managed Database.
I followed this document http://docs.oracle.com/cd/E27363_01/doc.121/e25139.pdf
but I fail.
this is the error I get
Executing job: jobs/40installOracle.pl --install --remoteDBprops=/var/tmp/RemoteDBProps.txt
40installOracle.pl Job Start = Wed Aug 6 11:16:25 2014
looking for props file: /mnt/xvmoc_full_bundle/./Linux_i686/Product/installer/scripts/localOracleConfig.propertieslooking for alter storage file: /mnt/xvmoc_full_bundle/./Linux_i686/Product/installer/scripts/alterStorage.sqlRestarting install at state=done_install_ic
Skipping Step:PrepOraDB because currentState=done_install_ic
Skipping Step:Install IC because currentState=done_install_ic
Error: Failed to get a database connection: Connection refused
satadm: ERROR: --- Failed to verify database
Cannot verify remote database
Please fix the problem and then try this step again.
For a full log of the failed install see the file: /var/tmp/installer.log.28153.
t. Try this step again (correct the failure before proceeding)
x. Exit
this is my RemoteDBProps.txt
mgmtdb_appuser=OPSCENTER
mgmtdb_password=xxxxxxxx
mgmtdb_roappuser=OPSCENTER_RO
mgmtdb_ropassword=xxxxxxx
mgmtdb_dburl=jdbc:oracle:thin:@192.168.1.100:1521/oem
I tested the connection to the sql using OPSCENTER and is working fine.
What am I doing wrong?
kind regards
Albert Boqo

Hi Albert,
which Version of remote DB do have installed ?
As the error indicates that the error say sqlpplus can't connect to it.
Is the Oracle listener running for port 1521 ?
Error: Failed to get a database connection: Connection refused
satadm: ERROR: --- Failed to verify database
example to verify the status:
/export/home/oracle/u01/app/oracle/product/11.2.0/db_1/bin/lsnrctl status
and what is ../oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
configured is these same port/hostname as in RemoteDBProps.txt
Regards
Klaus M

Problem with css processing in Firefox8 on Win7.

Hi guys. I have a problem with css processing in Firefox8 on Win7. I need to make div which width and left css properties should be dynamically changed. Inside this div i have an swf object. When i change width and left css styles for my div, it jumps on the page, but other browsers render that well. What can you suggest to fix this problem? Thanks

A good place to ask advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

Problem with upgrade Extension Manager 6.0.4

Problem with upgrade Extension Manager 6.0.4, code error U44M1P7

What version of the Adobe Application Manager are you using? Which operating system are you using?

Problem with XSQLRequest.process

Problem with XSQLRequest.process:
I'm trying to run XSQL files using XSQLRequest.process. I'm working on the chapter 3 examples in Muench's book and got FAQXML.xsql running okay but have had problems with: FAQhtml.xsql BTW I am calling them from a different directory and am using 9iAS under win2K SP3.:
I've fixed errors such as:
End tag does not match start tag 'img'.
by adding </img>
and:
End tag does not match start tag 'META'.
by removing the <head> section from the xsl.
But now i've got:
XML parse error at line 2, char 1
Expected 'EOF'.
and don't have a clue.
Some questions I have are:
--Why don't I get these errors when I run the same files from Internet Explorer?
--Where is the intermediate XML file?
--How will I get HTML output?
I'd appreciate any help you could suggest.
Peter.
Here is the .xsql and some of the .xsl:
<?xml version="1.0"?>

<?xml-stylesheet type="text/xsl" href="http://localhost/ch03/FAQ-In-HTML.xsl"?>
<xsql:include-xsql href="FAQ.xsql" xmlns:xsql="urn:oracle-xsql"/>

<html xsl:version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
-->
<body>
<center>
<table border="0">
<tr>
<th>Question</th>
<th>Difficulty</th>
</tr>
<xsl:for-each select="ROWSET/ROW">
<tr>
<td>
<table border="0" cellspacing="0">
etc...

XSQL version is 1.0.2.0.
Well, in answer to your import question, yes. Xerces can import Xerces documents properly. Thus if we use Xerces importNode on a document parsed/created using Xerces' DOM implementation, the attribute values stay.
We are using Xerces because it is the foundation of our infrastructure layer (which is partly because it's used in Catalina).
Question. Is it possible that XSQLParserHelper which, as you say, uses an instance of oracle.xml.parser.v2.DOMParser to parse the document, is having trouble with different versions of DOM? I ask because we've noticed that to use Catalina and have its class loader to function successfully, we had strip all the DOM classes from xmlparserv2.jar
importNode snippit ...
public void service(CioServletRequest req, CioServletResponse resp) throws ServletException {
DomResponse respm = resp.createDomResponse();
Document dbdoc = respm.getDocument();
XSQLRequest req = new XSQLRequest( pageUrl );
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
req.process(params, ostream, new PrintWriter(System.err));
String s = new String(ostream.toByteArray());
Document retDoc = respm.parseDocument(s);
dbdoc.appendChild(dbdoc.importNode(retDoc.getDocumentElement(), true));
Hope this helps.
Steve.
null

Problem with a process chain transport

Hi all,
I have a problem with a process chain transport, I transport it but when I see the changes in testing environment I dont see it, I did it four times but nothing happen and I dont have errors.
Can anybody tell me how to transport a process chain.
Thanks.

Hi Federico,
When you tranport Process Chains, initially chains will be available under "Not Asigned" node in RSPC Transaction. The transported chains wont be get highlighted automatically. Manually need to open the chain in update mode and activate it on Quality.
Hope it will help you to resolve the problem.
Regards,
Raji

Problem with Nokia Video Manager - No video, only ...

Hi all,
I have a problem with nokia video manager. I have been converting movies to mp4 and watching with my cell phone for a while now. But all the videos I have converted were less than 30 min. long.
When I tried to watch a video longer than 36 minutes, the picture froze some time around 36th minute and only the sound continued to play. I have tried several other videos with similar lenghts and all seem to freeze at the same exact point. The player continues to play the sound after picture freezes.
Could someone please help ???
Regards
/Cenk

Hi davidf
Thanks for the information,I must confess that I always use:
http://www.slysoft.com/en/clonedvd-mobile.html
when transferring movies to the N95, but that is just a personal choice!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Problem with AND process in daily running process chain

Dear Friends,
I am currently I am facing problem with AND process. In my daily running process chain, daily the process chain is failing at AND process. Currently I am workaround and manually repairing the AND process and loading the data with below (link) steps.
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
I need permanent solution for this reoccurring problem. Kindly share your thoughts and ideas to resolve this problem.

Hi,
The below are the job log. After this the batch job is failing.
Job log overview for job: BI_PROCESS_AND
Job started
Step 001 started (program RSPROCESS, variant &0000000190315, user ID MAESTRO)
This AND process is not waiting for event RSPROCESS, parameter 475P4YTXTIIOA6IQ9GAZVEP24
Job cancelled after system exception ERROR_MESSAGE

Installing AS: special problem with OPMN Process Manager...

Similar Messages

Maybe you are looking for