Installing ASM Issues - CSS Stack Appears not to be running

I am installing ASM
When I run root.sh I get the following error:Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started.
The install is on Centos 5 (aka RHEL 5). I have set up a user and a group specifically for this install (user: oracleasm group: asmdba) all of which are the owners of the disks (dev/oracleasm/disks) and the home which i am installing it on. But cannot get past the CSS stack appears not be running.
Any assistance would be greatly appreciated...I have been all over OTN and metalink but no luck.
Regards,
Matt

Did you ever get and answer for this...I have EXACTLY the same issue but on AIX.

Similar Messages

  • After installing update itune 10.5 will not open or run on windows 7 pc keeps telling me error 7 126 and that AVFoundationCF.dll failed to load. reinstall.I have done the complete 6part unistall 10 times now and each time I get the same thing anyone have

    So I installed the latest update of Itune on my Windows 7 Ultimate 64 bit PC.( the previous versions worked fine never a problem)
    It installs, and comes up with error7 126. Reinstall program again.
    So I go through all six steps to unistall, and reinstall a frsh downloaded compy of 64 bit Itune from Apple Site. and reinstall again and again, went through this process 10 times still having same problem, including now also comes up with AVFoundationCF.dll missing, try to install that won't install.
    So now I can not use anything apple, iteunes, safari, update etc, nothing will work, which means I can no lobger sync or update my Iphone 4S.
    Does anyone have an answer for me????

    I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
    I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
    Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
    Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
    Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

  • Firefox needs to close and I can't load Firefox until I close it or reboot. Firefox appears not to be running and is not listed when I press "Ctrl-alt-delete."

    Message says that Firefox needs to close. It does not appear to be running even when the "Taskmaster" (Ctrl-alt-delete) is displayed. The message says to close Firefox or reboot my computer. It happens constantly, even though I have closed Firefox, already. It appears to happen most often when I reach a page that refuses to respond to any mouse clicks, although, I can close the page (x). I, then, I cannot open Firefox until I reboot.

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.org/kb/Firefox+hangs

  • CSS not starting while installing ASM on Standalone Server

    Hi All,
    While installing ASM on AIX server, CSS is not coming up. This server is not on cluster. I have given below the output of after executing the root.sh script.
    bash-3.00# /orahome/asm/root.sh
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
    Can anyone help me? It's bit urgent!!!!
    Thank you.
    Regards,
    Mithra.

    Hi All,
    Thanks for all the help.
    I have found the solution.
    I had to delete all .oracle folders and then run the root.sh
    Thanks once again.
    Regards,
    Mithra.

  • Installing ASM in it's own home (non-RAC environment)

    I am installing ASM
    When I run root.sh I get the following error:Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started.
    The install is on Centos 5 (aka RHEL 5). I have set up a user and a group specifically for this install (user: oracleasm group: asmdba) all of which are the owners of the disks (dev/oracleasm/disks) and the home which i am installing it on. But cannot get past the CSS stack appears not be running.
    Any assistance would be greatly appreciated...I have been all over OTN and metalink but no luck.
    Regards,
    Matt

    Check if daemon ocssd.bin is running by executing:
    ps -ef|grep ocssd
    If it not running then execute
    /etc/init.d/init.cssd run
    sleep 60
    /etc/init.d/init.cssd start
    sleep 120
    /etc/init.d/dbora start
    If that works you had problem because of Oracle bug and the solution in metalink note id 264235.1
    You need to fix the /etc/inittab file moving the line that had init.cssd run to line before level 3 scripts executed.

  • After installing snow leopard most applications appear to not respond

    After installing snow leopard most applications appear "not responding"
    Message was edited by: john770

    Hi John, Welcome to Apple Discussions.
    Please go to "My Settings"and give us more information about your Mac. It's on this page at upper right ➦
    On your  menu choose "About this Mac" and fill in : Version, Model, Processor and Memory. Also, your "available" hard drive space which will will be at the bottom of your Finder window (xx GB available).
    Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps function correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to Users/(yourname)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    -mj

  • I am not able to run a Windows Azure application

    I have a very strange issue.
    I am not able to run a windows azure application which has a WCF service and mschart in it. Following are the steps to reproduce the error:
    1) Create a new windowsazureapplication with a blank asp.net webrole
    2) Now add a new WCfService
    3) run to check it runs ok
    http://i.stack.imgur.com/1g6gW.png
    4) now in one of the pages include mschart, and open the design of the page to make sure the webconfig is changed to use the mschart.
    5) now try to run the project.
    I am getting error message like this one:
    enter image description here
    Is this a problem with windows azure or am I doing somthing wrong?
    FYI: This is not my first project on windows azure.
    RuchitRami

    As far as I know Toshiba doesnt support such Microsoft stuff so I think Microsoft is the right adres for such issues.
    Have you already checked what Microsoft say about that?

  • Error - Object variable or with block variable not set while running report

    Hi,
    I am trying to run BEx reports through portal.
    However I am not able to run any report. I am getting following error.
    "Run time error '91':
    Object variable or with block variable not set"
    This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
    Also I have authorization to those reports. So doesn't seem to be authorization issue.
    Please help me to resolve this problem.
    Thank you in advance.
    Regards,
    Deepti Jain.

    Hi Deepti,
    Can i knw how you solved this issue?
    Regards,
    Maili

  • Issue with product tops not moving after Upgrade Filesystem installed

    All:
    I have just installed the R12 tech stack and db in preparation for the upgrade. After this is completed it (rapidwiz) creates an environment file in $APPL_TOP. My issue is that some of the products, based on this environment file, still point to the 11i structure. There are about 10 products which have this issue. What should be done. Any suggestions are appreciated. I have pasted some of the ones that are still pointing to the old structure:
    AMF_TOP=/mnt/rd4/oracle/devappl/amf/11.5.0
    GRAPHICS60_PATH=/mnt/rd4/oracle/devappl/au/11.5.0/graphs
    CSS_TOP=/mnt/rd4/oracle/devappl/css/11.5.0
    JTS_TOP=/mnt/rd4/oracle/devappl/jts/11.5.0
    Here are some that are pointing to the correct location:
    INV_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/inv/12.0.0
    IEC_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/iec/12.0.0
    AMS_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/ams/12.0.0

    kirkladb wrote:
    All:
    I have just installed the R12 tech stack and db in preparation for the upgrade. After this is completed it (rapidwiz) creates an environment file in $APPL_TOP. My issue is that some of the products, based on this environment file, still point to the 11i structure. There are about 10 products which have this issue. What should be done. Any suggestions are appreciated. I have pasted some of the ones that are still pointing to the old structure:
    AMF_TOP=/mnt/rd4/oracle/devappl/amf/11.5.0
    GRAPHICS60_PATH=/mnt/rd4/oracle/devappl/au/11.5.0/graphs
    CSS_TOP=/mnt/rd4/oracle/devappl/css/11.5.0
    JTS_TOP=/mnt/rd4/oracle/devappl/jts/11.5.0
    Here are some that are pointing to the correct location:
    INV_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/inv/12.0.0
    IEC_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/iec/12.0.0
    AMS_TOP=/mnt/rd4/app/dev/apps/apps_st/appl/ams/12.0.0Make sure that all these TOPs are set properly in the R12 appliction context file and in all env files under $APPL_TOP directory.
    Also, make sure that the 11i env file is not sourced in the applmgr user's profile (i.e. .bash_profile).
    Thanks,
    Hussein

  • When I try to attach my css style sheet Dreamweaver gives me an error saying that my .css file appears to be an .html file and will not attach. How do I fix this so I can attach my style sheet?

    I have built a css style sheet in Dreamweaver. When I try to attach it to my html website, it prompts me that my "css file appears to be an .html file and cannot attach". I've tried removing the /* */ as suggested by other forums, but this has not resolved the issue. I was using css style sheets with no problem 2 days ago. Now I get that error message. How do I fix this so I can attach my style sheet?

    What does the code of the CSS file look like?
    An external CSS file needs to be written in CSS only (no html tags like <html>, <body>, <head>, etc ).
    It also must have a .css file extension, if yours has a .html extension it won't work.

  • I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

    I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
    /Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
    Now launch InDesign and see if the problems are resolved.
    If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
    Let me know if any of these suggestions work for you
    I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

  • While trying to re-install Mac OS X, appears the following screen: Install failed Mac OS X could not be installed on your computer The installer encountered an error that caused the installation to fail. Contact the software manufacture for assistance.  C

    While trying to re-install Mac OS X, appears the following screen:
    Install failed
    Mac OS X could not be installed on your computer
    The installer encountered an error that caused the installation to fail.
    Contact the software manufacture for assistance.
    Click Restart to restart your computer and try installing again.

    You should be able to install Mac OS X 10.7 or later on your 2011 MacBook Pro without issue, if it came with 10.6.3 as your signature suggests.  Mind you, any 2011 MacBook Pro must use the original 10.6 installer disc labelled MacBook Pro if it desires to have 10.6 installed on it.   The retail installer disc will not work on that model, nor will one from another age MacBook Pro, or other model labelled installer.  Also
    10.7 came both on USB Flash drive and Mac App Store installer versions.   Both required either 10.6.6 minimum be pre-installed, or no Mac OS X operating system on the drive or partition it was to be installed on.
    10.7.1 through 10.7.5 combo could be installed only once 10.7 had been installed.  A combo update is available for installing on top of any version of 10.7.  Otherwise only the preceding version could be updated to the next.
    10.8 came only on Mac App Store installer.  It is available only to 10.6.8 and later users.
    10.8.1 to 10.8.5 combo could be installed only once 10.8 had been installed.  A combo update is available for installing on top of any version of 10.8.  Otherwise only the preceding version could be updated to the next.
    10.9 came only on Mac App Store installer. It is available only to 10.6.8 and later users.
    Both 10.9 and 10.9.1 had a serious security vulnerability, which only 10.9.2 addressed.
    10.9.2 combo could be installed only once 10.9 had been installed. 
    For all three Mac App Store releases, the partition to be installed on had to be GUID partition formatted according to Apple Disk Utility.

  • Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

    Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5

    Hi Gray Don,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Follow the steps in order, but step 5 resolves the issue in most situations.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Judy

  • After installing IOS6: after erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari. Not a big issue but it should not be that way.

    After installing IOS6:
    After erasing the history of Safari, the next time I fire up Safari, I see a split-second of the last displayed screen of Safari.
    Not a big issue but it should not be that way.

    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Adobe Flasf update will not install/ password issues

    I  have been trying for a week to install the upgrade to adobe flash on my mac book pro OS,10.7.5. The major issue is Adobe will not accept my password. I have changed the password more times than I can count, but every time I get to the step that asks for the password and I type it in the box , it  use shakes at me to tell me that the password is wrong. I triedthe Chat help line but the support person disconnected me and frankly I have bad arthritis and typing all the time just to get to someone who does understand the complexity of the problem is compounding the problem and certainly not resolving the issue . Is there some other product besides adobe that can be used. This is completely ridiculous and certainly not tech friendly.

    Hey dommm56,
    Please refer this kb file and let me know if it resolves your issue.
    Error 1305 when you try to install an Adobe product (Windows)
    Regards,
    Anubha

Maybe you are looking for