Installing boot camp in windows without the Mac OSX disc

Hello,
I'm pretty sure I've found the answer already, but it just seems really strange so I'm going to ask just to make sure.
1. I have installed Windows 7 64-bit Pro by starting with the boot camp assistant utility in MAC OS X.
2. Everything seem to work fine in windows except the wifi, touch pad, web cam and video drivers. The video drivers were installed via the manufactures provided drivers. The other drivers I was unable to find or update via the windows automatic search.
3. I looked through Apples website and found updates 3.1 and 3.2 of boot camp, but no non-update software.
It seems that I will need the OS X disc to install the 3.0 version of boot camp.
But surely, since all I am looking for is drivers these can be download without the disc that came with my laptop. I mean, if I can't do it any other way then so be it, but I'm not at home right now and I'm bored so...

Hope you went out and picked up 10.6.3 DVD for $29.
Now, when you are in Windows, copy it to disk so it is always there in the future, and back it up to flash card or something.
Sometimes you can find drivers but you need the motherboard set to enable the devices to begin with.

Similar Messages

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC or not?

I forgot to back-up my information (pictures, excel documents) on MAC before installing boot camp and Windows. I am mid-way through the process, at the point where I need to install the drivers. Will i be able to retrieve my documents on MAC and finalizing the Windows 7 installation (for the 1st time) or not?
I am worried that may lose my information... Appreciate any feedback! Note: already half-way in the process of installing!

Yes, IF you picked the right partition, as in the Boot Camp partition. If everything is done right you should be able to boot into the Mac side.
If you already booted into Windows and are at the point of installing the Boot Camp Drivers your already done installing Windows! Yea! All you need to do is just install the drivers and everything should work normal.
The Windows partition and the Mac partition are seen as two different HD's now as far as the computer knows.
You can use the Boot Camp control panel in Windows to boot into the Mac side and the Startup Disk in System Preferences on the Mac to switch to Windows. If you can't then press and hold down the Option key untill you get the boot screen.

Unable to install Boot Camp and Windows 8.1 on Mac Mini

Hello,
My computer is a late 2012 mac mini with fusion drive. OS is OSX 10.9.1. Also an apple external optical drive and a Windows 8.1 full install DVD. I attempted to install Boot Camp and Windows 8.1 and failed.
I ran Boot Camp Assistant and first problem was when it rebooted the computer - I got a text message that said the OS was missing. After a while I tried holding down the Option key while rebooting, then I got several choices to boot from - I chose the windows disk, and windows installation started.
I was eventually given a list of 6 or 7 partitions to chose from, to install windows into. I settled on the one marked BOOTCAMP. It seemed the best guess. But the installer said that it could not install on this partition. Something about the wrong format or EFI or boot partition(s)?? In fact, the installer would not let me install into any of the listed partitions.
I restarted Boot Camp and it allowed me to remove the boot camp partition and revert to OSX only. Thanks for that!
My questions: is Windows 8.1 supported with my configuration? I know the FAQ says it is not. If in fact it is, did I do something wrong?
Thanks,
Doug

Poking around, I found an installation manual which was downloaded to my USB drive with the boot camp windows drivers. It says that when I reached the point in the windows installer where I'm given a choice of partitions, I should choose the one marked BOOTCAMP, and format it. Which I didn't think to try before. So I tried again, using Boot Camp Assistant from the top.
Failure again. This time, when the computer rebooted, I selected the Windows icon as before, but I got a text message saying that the boot manager couldn't be found, and a dead stop.
I also found that on the option-key reboot disk selection screen, I could eject the windows install disk and reinsert it. When I did that, I got the Windows boot icon and another icon labeled EFI boot. So I also tried that icon, with the same result.
So, I'm doing exactly what I did before (I think), but now the windows installer won't start.

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

Installation Guide
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
Apple Boot Camp Support
Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
You need Apple drivers. And you then need to add on your own audio driver.
You can run Assistant at any time to download and save a set of drivers.

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

Is there any way to clone a machine using boot camp running WinXP. The Mac side is running Snow Leopard. I want to clone a newly set up machine on to a number of machines in a student lab. I am wanting to clone both particians

AFAIK, there's no app that'll clone the Mac and PC volumes so you can restore them. System Image Utility.app or Deploy Studio for Mac and Ghost for PC are needed. See these for starters:
http://clc.its.psu.edu/Labs/Mac/Resources/blastimageconfig/
http://blog.macadmincorner.com/
http://lists.apple.com/archives/System-imaging/

I installed Boot Camp on Windows 7 PC (No Mac computer!)

I was trying to install drivers in order to use a Magic TrackPad that I got. I read somewhere that I had to use/install Boot Camp on my PC. Well, I did so... however, I have no Mac... it's a 100% Windows 7 PC. So, I was able to install Boot Camp 3.0 and 3.1 (I think!) When I try to boot my machine, it will NOT boot anymore. What can I do? Could someone please help me? I noticed that the name of my main C: drive changed to "BootCamp"... it did this automatically. I tried to fix the MBR via the Windows 7 Installation DVD, but no success. :-( Someone, please help!
Thank you!
Minime is not evil anymore!

No, I cannot do a system restore as there is/was not any system restore point. I do not care about the drivers for the Magic Trackpad anymore... I just want to get my PC back to the way it used to be... in other words, I'd like to have it boot again. I am able to 'see' the contents of the Hard Drive by means of the Windows 7 DVD; have tried to fix the MBR by doing bootsect /fixmbr and other commands, but still no success.
Is there ANY WAY to get rid of BootCamp or undo whatever Boot Camp has done to my HD by means of a Linux CD or Windows 7 Installation CD or anything else? Is the MBR what has been changed? Any GOOD ideas or suggestions will be welcome. Please, forget about the Magic Trackpad... I just want to get Windows 7 to boot again.
Thanks.

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Installing Boot Camp in windows 7

I installed Windows 7 64 bit on my MacBook Pro 15" from mid 2009, all went well until I tried to install Boot Camp from my OS 10.6 start up disk. Most but not all components install and when I run the Boot Camp 3.1 update it says I need to install Boot Camp 3.0. My key board works partially, as dose the track pad. I have read some solutions in this forum but they all include a right click which I don't have without the updated driver that I can't install. Apple doesn't seem to offer a complete Boot Camp 3.1 64bit download. I'm not sure why I've installed Windows at all, for two days all I've done is down load drivers. I know I sound like a commercial but Windows 7 is a giant pain in the ***.

Maybe your post should be reversed some how. In any case the Boot Camp form is here:
http://discussions.apple.com/category.jspa?categoryID=237

Trouble installing Boot Camp and Windows 8

I'm attempting to install Boot Camp for the first time using OS X 10.10.1 / Boot Camp 5.1.2. When I conduct the install, I get a message stating that this machine (Macbook Air, Late 2010) can only install Windows 7.
Apple's Documentation states the following:
The Windows ISO image or DVD must be of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, Windows 8 Pro, Windows 8.1, or Windows 8.1 Pro.
I did attempt to install W8, but was asked to provide W7 installation media. Based on the documentation I should be able to install Windows 8. Any thoughts or suggestions? Thanks

You cannot install Win 8 on that model. See the following: Boot Camp- System requirements for Microsoft Windows operating systems - Apple Support.

Does any one know if the Mac OSX discs are machine/model specific?

Hi Folks,
I am a first time mac owner, having just bought myself a 2nd hand iBook G4 (power PC 1.33ghz 1.5g Ram) and I'm looking for the mac OS disc that would be compatible, after looking into the various options I'm a bit confused to say the least!
ATM I'm running 10.5 and was wanting to get the install/restore discs just incase I do something wrong to the computer and manage to break it (as seems to be my luck lol)
some of the software i have seen the discs are labeled 'all macs' and there are some labeled for specific machines.
any pointers you could give would be greatly appreciated.
many thanks
James

Your iBook G4 was first released with OS X 10.3 and later 10.4. If you have 10.5x installed you will need the Full Retail Version of Leopard.
cornelius

How do I install Boot Camp drivers without the Mac OS disc?

When I installed OS X Lion for my Macbook Pro, I purchased it off the Apple Store (so I don't have the disc.)
Is there any way possible to download the drivers I need without the disc?

there is a guide when you launch boot camp assistant, and the faqs articles how-to and manual are
http://www.apple.com/support/bootcamp
In fact the above and change the last /..... to product name is usually your best first stop for help. And Help menu in program, like Boot Camp Assistant of course, will as well!!

How do I tell the installed Boot Camp version (Windows 7, 32-bit)?

I installed Windows 7 (32-bit) in a new Boot Camp partition. I see that there are several Boot Camp version updates for 32-bit Win 7 (3.2 from 3.1, etc.). Previously I had Windows XP, and in the system tray at lower right of the screen there was an icon for information about Boot Camp. My Win 7 installation has no such icon. How do I tell which Boot Camp version I am running?
Likewise, Win XP had an Apple utility for setting the startup disk. The only Apple utility I find in Win 7 is Apple Software Update (which shows no updates needed).
What am I missing?

Answered my own question! When I installed Win 7, I failed to install the Boot Camp drivers on the OS X install disk. Did so, and now the Boot Camp icon shows up.

Installing Boot Camp with Windows XP

I just bought a new game for my computer, but as it turns out, it's a PC ONLY game. So I thought I'd try out Boot Camp for the Mac. I went to http://www.microsoft.com/windows/windows-xp/default.aspx and clicked on "Important: Download Windows XP Service Pack 3". After that it goes on about why you should install it and so on. But the thing I was wondering about, is if I buy that, will I be able to install it using Boot Camp.
I appreciate any and all responses.

Hi and welcome to Discussions,
first things first: from the link you mentioned you only get the Service Pack 3 for Windows XP and not the operating system Windows XP itself.
That Service Pack will only install on a WIndows XP that is already installed.
Have a read through the BootCamp Installation Guide to be found here http://www.apple.com/support/bootcamp/ plus the additional FAQs there.
You have to buy yourself a Windows XP; Vista or Windows 7 to install it on your Mac with BootCamp.
Depending on what Windows game it is you wanna play, you can also have buy and use Crossover Games for Mac https://www.codeweavers.com/products/cxgames/
Look through their compatibility list http://www.codeweavers.com/compatibility/ whether that game is supported.
Regards
Stefan

DVD Drive disappeared after installing Boot Camp on Windows 8

I am running Mountain Lion and I bootcamped Windows 8... this is a fresh install.
1. I installed Windows 8 and the DVD is still working
2. I installed Bootcamp software via DVD and was asked to reboot
3. I reboot my iMac
4. Now, my friggin DVD doesnt work anymore...
5. I look at My Computer and it's gone.
6. I look at the device manager and it's not there
7. I showed hidden devices and the hl-dt-st dvdrw ga32 is there (disabled of course)
8. i am writing to apple community after a night of searching for a solution in vain.
please help me. i really need my DVD drive
thanks in advance

thanks for the response
1. Yeah I thought that's a mandatory thing because i need to be able to control the brightness with my keyboard, updated graphics card, boot camp control panel, etc
2. No there's no enable for this because Windows 8 recognizes it as a "disconnected device" and asks me to reconnect the dvd drive to the machine (which it obviously already is).
3. Ive tried those before, also even editing the registry but it didnt work.
It's weird because it never happened before on Snow Leopard » Lion bootcamp driver updates. Just in Mountain Lion

Installing boot camp in windows without the Mac OSX disc

Similar Messages

Maybe you are looking for