Installing Boot Camp- space issue

I'm trying to install Boot Camp/Windows on a MacBook Air running Snow Leopard. I have 23.4GB of free space, but an error message comes up saying that I need at least 10 GB of space to proceed. What's happening?

Hi arcticbelle,
Boot Camp needs a minimum of 10GB of contiguous free space in order to install. Disk Utility will show two different "free" readings, depending on where you look. The larger figure, which the Finder and other things will use, is the total free space available. The second is the amount of free space available for a new partition. It's shown when you select the top line for the drive, click the Partition tab, then select a partition, the "Available" amount may be smaller.
This is because partitions, unlike folders, must occupy contiguous space on a disk. The data on your OSX partition is scattered over it, not all nicely packed together. That's normal, as you add, update, and delete files, not every nook and cranny is used again immediately.
You could back up your drive (on two different HDs, to be safe), reformat it to 2 parttions, then restore the backup. But it's going to be very tight, and you'll likely have performance problems because of it.
Try to delete anything you don't need, and/or offload stuff you don't use often and delete it.

Similar Messages

I am trying to install Boot Camp but it says I haven't got enough free space to make a partition, however in disk utility it says I have 27GB free!

I am trying to install Boot Camp but it says I haven't got enough free space on my start up disk - that I need at least 10GB free space - however in disk utility it says I have 27GB free!

if your SSD is only 60 GBs, then you don't have space on which to install Windows. That 27 GBs is space you need to have for adding files you create, music you download, added applications, pictures, etc. You need to maintain at least 10 GBs as free space for OS X, plus you need space for files OS X will create and add to over time.
Your 60 GB SSD is just a minimum usable size for OS X. There isn't sufficient space to also support Windows which requires close to 25 GBs of the 27 GBs you still have free. Sorry, but that just doesn't really work well.

Bluetooth Keyboard/Mouse/Trackpad won't automatically connect after installing Boot Camp

Hey guys!
Another peculiar thing happened to me today with my 3-week-old maxed-out 2012 iMac (other than it kernel panicking when I powered it down the other day...did I mention this was 3 weeks old?).
After installing Boot Camp which I will never do again, my iMac (on the OS X side) no longer recognizes my stock Apple Wireless Keyboard, Magic Trackpad, or Magic Mouse automatically, until I press a button on the keyboard and wait 5 seconds, click the trackpad and wait 5 seconds, or click the mouse and wait 5 seconds.
(The Windows 8 Boot Camp side pairs with the devices immediately after Windows boots, which leads me to believe that the bluetooth devices are defaulting to look for Windows.)
One of my huge fears I had when considering purchasing an iMac is that the Bluetooth devices wouldn't immediately connect. Being a power-user with former Mac notebooks and working understandably fast having owned a web development company for 8 years now and not having to worry about Bluetooth device pairing, I'd like to think this fear is substantiated. But after first use (before installing Windows 8 with Boot Camp Assistant) it functioned normally and the iMac would automatically discover my peripherals and connect them by the time time computer turned on. I also had no trouble holding the Option key on boot to select a boot device....
Now, ever since I set up Windows 8 on the Boot Camp partition and paired the keyboard/mouse/trackpad to Windows, the Mac side completely ignores the keyboard/mouse/trackpad until I click a button on each.
I'm trying to keep it together but this is raging me out.
I went into Windows, immediately unpaired the 3 peripherals from windows and now use a wired keyboard/mouse with Windows (yay, desk space!), deleted the items entirely from the bluetooth panel, then booted to Mac and did the same thing. I then re-paired the devices to the OS X side andddd...no go! Still doesn't find them automatically. I am extremely upset by this and can't seem to fix it.
To summarize, my two issues are:
A. The iMac in OS X does not automatically recognize my bluetooth peripherals until I click a button on each and wait a couple seconds for them to pair.
B. I cannot hold Option to select a boot device (or choose Windows/Mac for example) because the computer doesn't recognize the keyboard until OS X boots and I press a key.
Please...for the love of god...someone help me, and stop me from formatting my entire computer over this issue.

I don't have a logitech mouse, but is it possible that the mouse is going to sleep during the reboot, and is thus unavailable when the OS is looking for it?

How to install Boot Camp on a MacBook Pro 2011

Well I bought a new MacBook Pro and I have constantly been trying to install Boot Camp.
When I open Boot Camp it shows me the Introduction, then it asks me if I would like to install the Lastest Windows Supports Software From Apple, and if I would like to Install Windows 7. I tick both boxes and then another page opens.
It asks me if I would like to install it to a DVD or CD, or if I would like to install it to an external hard drive. Now, I have tried both of these, and they both show a page asking me how much space I would like to be Mac space, and Windows space. After I've chosen how much I would like, I click install. After about 30 seconds, a message pops up saying the installer disk could not be found, please insert the installer disk and wait a few seconds, and the click install again.
I have done this many times, and that same message pops up. Please, if any of you people out there have the solution for me it would be gratefully apreciated.
Thanks.

No, it doesn't. You have to purchase the Windows 7 installer. Windows is not included with the computer. Did you discuss the matter with someone when you bought your computer? If you did they should have told you that you would need to buy Windows 7. If you had asked while you were purchasing the computer then you could have paid for Windows at the time and had it installed for you.

Can't install boot camp(Am in desperate need of help!!!)

Ok, the story, I will try to make it short:
-Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
-Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
-When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
-*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
-Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
-Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
-Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
*Ran a program called Partition Inspector;*
* Report for internal hard disk *
+Current GPT partition table:+
+# Start LBA End LBA Type+
+1 40 409639 EFI System (FAT)+
+2 409640 1531068455 Mac OS X HFS++
+3 1531330600 1953525127 Basic Data+
+Current MBR partition table:+
+# A Start LBA End LBA Type+
+1 1 409639 ee EFI Protective+
+2 409640 1531068455 af Mac OS X HFS++
+3 * 1531330600 1953525127 0c FAT32 (LBA)+
+MBR contents:+
+Boot Code: Unknown, but bootable+
+Partition at LBA 40:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 1, type EFI System (FAT)+
+Partition at LBA 409640:+
+Boot Code: None+
+File System: HFS Extended (HFS)
+Listed in GPT as partition 2, type Mac OS X HFS++
+Listed in MBR as partition 2, type af Mac OS X HFS++
+Partition at LBA 1531330600:+
+Boot Code: None (Non-system disk message)+
+File System: FAT32+
+Listed in GPT as partition 3, type Basic Data+
+Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
*When running diskutil:*
*diskutil list*
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUIDpartitionscheme *931.5 Gi disk0
1: EFI 200.0 Mi disk0s1
2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: FDiskpartitionscheme *931.5 Gi disk1
1: WindowsFAT32 My Book 931.3 Gi disk1s1
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FRMCxFREDADVD *3.5 Gi disk2
*And when I searched on the boot camp disc specificaly:*
Device Identifier: disk0s3
Device Node: /dev/disk0s3
Part Of Whole: disk0
Device / Media Name: Untitled
Volume Name: BOOTCAMP
Mount Point: /Volumes/BOOTCAMP
File System: MS-DOS FAT32
Partition Type: Microsoft Basic Data
Bootable: Is bootable
Media Type: Generic
Protocol: SATA
SMART Status: Verified
Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
Read Only: No
Ejectable: No
Whole: No
Internal: Yes
Other things I tried:
-Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
-Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
-Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
-I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
I simply don't know what to do:(
Cry
-Oil Pedestal

Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

Can I install boot camp on new startup drive?

I find I have to use Windows to administer a Network Solutions
hosted and built website. They claim to support Mac OS but
there are issues and they tell me that Internet Explorer is the
more reliable browser to use. So I'm wondering if I should
replace my primary drive with a new one and install Boot
Camp. Is this a workable solution? Should I consider one
of the virtualization programs?
Tom

I would suggest trying a VM first, and I would suggest using VirtualBox (as it is free), it will work but with a slight performance hit. If the hit is more than you can stand go the Boot Camp route.

Forgotten how to install Boot Camp

I had to reinstall Windows 7 64-bit because I needed more space for Mac OS X. After reinstallation, which went perfectly, I have forgotten how to install Boot Camp. This MBP 3.1 will not install Boot Camp from the Snow DVD because it says that 64-bit mode isn’t supported (not true). I installed several components by hand. All I remember from the old style of bulletin boards was to copy the Windows contents of the DVD on to the desktop, then to use SuperOrca to modify the ISO. I don’t, however, remember the exact details of what was supposed to be modified and how to do it. This is also supposed to prevent the error of Apple Software Update not recognizing the installation of BC 3.2 after it was done.
I can’t find the old instructions with the new format, so any help is appreciated. Peace.

Ok do this...
Insert your Windows Bootcamp Drivers Disc (aka OSX Install disc that came with your computer).
When you see the prompt from Windows Explorer, instead of clicking the "setup.exe" option scroll down and click in the Explore/view files (or something like that, don't remember.)
Look into the folder labeled as Bootcamp, then click another folder called "drivers", inside there should be another folder labeled as "Apple".
Inside, there should be a file labeled "bootcamp64.msi".
Single click the file (bootcamp64.msi) and once it's highlighted, do a right click ( to do you must do the following key combo Shift+F10)
A right click menu should appear. One of the options is labeled as "Troubleshoot Compatibility".
A dialog should appear, click on the "Start Program" option when it becomes available.
The Bootcamp Driver Wizard should now appear. Follow the prompts of Bootcamp Assistant as always.
Drivers will install automatically.
Reboot.
Welcome to Windows 7 64-bit on your now Dual-Citizen Mac...
Report back with your results...

How do i install boot camp on a brand new 3tb iMac osx 10.8.2

how do i install boot camp on a brand new 3tb iMac osx 10.8.2?

Note: At this time BootCamp doesn't support 3TB drives - this is due to a memory allocation issue with Windows. Check out this article on a/an (unreliable) work around. I say unreliable because some people are reporting success and others failure. At this time if you really need Windows it probably would be better to use virtualization software like Parallels, VMWare, or VirtualBox.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Can I dual boot snow leopard and mountain lion if I've installed boot camp on my drive

Yes as I said before. If your model Mac came with Snow Leopard and you are now running Mt Lion and have Windows installed in a Boot Camp Partition all you have to do is make the Mt Lion partition smaller, take the free space and make it another Mac partition and you should be able to install Snow Leopard into that partition.
I have Snow Leopard, Lion and Mt Lion installed on my MBP. No Windows in a Boot Camp partition because I run Windows XP in a Virtual Machine on both Lion and Mt Lion.

Can I install Boot Camp 5 from Win 8?

I have a late 2011 Mac Pro tower running Windows 8 and Boot Camp 4. I have had Windows 8 ever since it came out, that means that I upgraded to Windows 8 with the last version of Boot Camp 4 (with no issues BTW). Now there is Boot Camp 5, and I want to upgrade my Mac Pro to Boot Camp 5, but the installer of version 5 tells me that I need Windows 7 to install Boot Camp 5. I already have installed Windows 8.
How can I upgrade to Boot Camp 5 from Windows 8 in my Mac Pro without going back to Win 7 or by formatting my drive?
Any help would be appreciated.
Thanks!!!

Thank youn for the reply...
This is what I get when I try to install from the USB drive...

Can I install Boot Camp on an external disk?

I have a MacBook Air ( version 3,2) and I am running out of space to install Boot Camp. I use Windows 7 by the way.
Can I install Boot Camp on an external disk? How do I go about doing this? I have an Apple external super drive and I have two USB ports on my computer.
Can I install the mac operating system on the external disk including the Applications and then install Boot Camp as per usual? How would I get the Windows 7 program to install on the external disk using the superdrive that I have?

BootCamp will only install on an internal disk.
If you are wiling to do some work, do some Google searches, use third party tools, and make your own custom Windows install disc, then you might be able to get what you want, but there is no guarantee that it will work on your specific hardware.
I researched this topic a year or two ago and found people claiming that using rEFIt and custom built Windows install discs, that they were able to do what you seek. After reading through all the instructions, I found it much easier to upgrade the HD in my MacBookPro to a 500GB drive and just installed my BootCamp on the spare 180GB space from the upgrade. That took me a little over an afternoon, and it was fully supported...

Can you install Boot Camp on a Pegasus2 Logical Drive?

Trying to plan my upgrade to the new Mac Pros and I'm wondering whether it's possible to install Boot Camp on a logical drive located on a Promise Pegasus2 Thunderbolt enclosure? Ideally I'd be setting up a series of logical drives on a Pegasus2 (2 to duplicate existing drives in my current Mac Pro, 1 for Time Machine, and 1 for Boot Camp) but I can't seem to find out whether Boot Camp partitions are supported...

I too would like to install a bootcamp partition on an SD card so that I will not loose a huge chuck of my internal drive to Windows, a system I need very rarely (this is important for all users of SSHDs, where internal storage space is precious).
If it is not possible to create a bootcamp partition on an external SD card, how about installing Lion first on that SD card, booting from the SD card, and then creating the bootcamp partition on that card. I would think that Lion's disk utility would consider the SD card as the internal disk, and so should make the partition and allow the installation. Large fast SD cards are not cheap, but I would think that this would be an option for those of us with limited internal storage space.
Has anybody tried this option?

Can't install boot camp drivers on my windown vista

Hello
First:-
I would like to say thanks to all of the members how helped me with allot of issues.
Second:-
I'm having a problem while installing boot camp drivers on my vista with using the Leopard disc, it always stop installing and gives me a message about sufficient privilege then i have to choose between these choices (Abort-retry-ignore)
please guys how i can solve this problem??

Well i did the same thing but i lost so many functions, such as:-
1_ Volume controller on my keyboard is not working.
2_ I cant switch to my macintosh unless if i restart and insert the leopard disc to open the startup disc and let me choose the way i want my computer to reboot.
3_ isight is not working.
4_ Bluetooth is not working.
and so many stuff.
i hope that there is another way like giving it the permission or something like that?
please guys is there a way to solve this issue?

Internal Microphone doesn't work (after installing Boot Camp 3.1)

I have installed Boot Camp 3.1, and after this installation, my internal mic doesn't work (ONLY IN WINDOWS XP).
I tried to fix the problem with several manners (hardware test in CONTROL PANEL / SOUND .../ VOICE TAB / VOICE RECORDING; reinstalling drivers and hardware etc), but I can't get success (for example, the test results: SORRY, NO SOUND IN MIC...).
On the other hand, when I boot as Mac (Snow Leopard), I can use the mic (in skype, for example), without problem.
I note that ear plug (connector in the back of the iMac) doesn't work too.
Somebody can help me in this case ?
Regards
JGFilho

i got a macbook pro, 2 weeks ago, the 2.53Ghz unibody aluminium, the desing of this mac is great even tough the system specs are really low for the price actually, im happy with it(the hardware)...
The only reason i got this is cause apple claims to support windows, i like Mac OS, but i work on windows i need it... if theres no windows capability in mac i wouldnt ever buy one, so this issue is really bothering me A LOT. my impresions about apple are changing after seing this topic filled with questions and not a single moderator answer, go and check a logitech forum and see how they take care about user problems.

Installing Boot Camp- space issue

Similar Messages

Maybe you are looking for