Installing bootcamp THEN partitioning Macintosh HD in different volumes.
I have heard that it was not possible with the first version of bootcamp.
So is it now possible to do it ?
Hi, what mac os version are you using?If you have Mac os 10.5.8 or the new SL boot the boot camp that you have installed allows you to partition correctly your HD so you can have both windows and Mac os runing on your mac.
"I have heard that it was not possible with the first version of bootcamp.
So is it now possible to do it ?" Awsering to your question,yes it´s possible,after you install windows via boot camp,you access mac os partition pressing ALT key when initiating computer and them use Disk utility to create more partitions in Machintosh HD.
Hope this can be of some help
Similar Messages
-
Installing Bootcamp - Which partition to choose
I'm trying to install Windows XP SP2 via Bootcamp on my new MacBook Pro (Feb 2008 model). I've created the partition okay, but when the machine restarts into the installer I can't determine which partition to install it on.
I've printed out the manual, and on page 9 there is a picture of the install set-up, clearly indicated is a partition marked "C: Partition 3 (BOOTCAMP) etc." however I'm not seeing the word "BOOTCAMP" in Setup and the lines I can see, are confusing with no clear indication which is the BOOTCAMP volume making it hard to determine which partition on which to install.
Any advice would be greatly appreciated.One suggestion I can make coming from a windows and unix background is to make the partitions different sizes, hopefully that way if you've created a 50 gig windows partition, you'll be able to see that partition size in the setup screens. I'm making the wacky assumption here that the bootcamp setup process displays partitions size.
-
Installing Bootcamp onto already existing drive
Looking to install Bootcamp then WinXP onto an already existing MacBookPro that is in daily use. Can this be done w/o having to backup, wipe clean and restore my Mac side?
I will of course backup my Mac data just to be safe, just wondering if I have to reformat my entire internal drive just to set up a Windows partition?
TIAThat is exactly how it is done and that is WITHOUT having to wipe out your Leopard installation. You would run Boot Camp while in Leopard and create a Windows partition on your current HD. Ensure that you have enough space to do so.
The installation guide (which you should print out and read) is available [HERE_|http://manuals.info.apple.com/en/Boot_CampInstall-Setup.pdf].
Axel F. -
I have installed bootcamp by the bootcamp assistant and worked properly.
Then I have partitioned the OS X 10.8.2 and installed another Mountain Lion System and I have got two MAC boot options and Bootcamp disappeared from the Option menu. However, Bootcamp still remained in the Startup Disk in the System Preferences. When I tried to boot Bootcamp using the Startup Disk it did not boot and received a message that there is no bootable device. I have not lost any data and can read Bootcamp partition from both OS X systems. Please advise how can I boot Windows / Bootcamp again? Thank you.Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
2. install OS X copy 1
3. install OS X copy 3
4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available. -
What is the install process for Bootcamp/Parallels?
I have a new MBP being delivered today and need to install Windows for one program. What is the process to install a VM?
I heard that I should install Bootcamp first, then install Parallels to the Bootcamp partition. Any advice? Thx.I guess I shold explain more about what I am doing.
I will be running a CRM program (Windows Based), and a Order Entrry program (Windows Based) (Memory Hog) all the time. Along with this, I will have Lotus Notes for Mac and Mac Mail open all the time.
Is there any harm, comcern, issues, hesitation,....to using Bootcamp to Parallels/Windows?
I just want to get this configuration correct the first time.
Also,...Am I able to drag files between Mac/PC ??? -
Can i clean install Lion into my Macintosh HD drive and leave Bootcamp as it is?
I would like to clean install Lion into my Macintosh HD drive and leave the bootcamp drive without getting affected from it...
is it possible or do i have to do the install on all the drive?If you have the Lion installer application in your Applications folder, then I suggest you make a copy in your Downloads folder because the installer deletes itself automatically after the installation. By saving it you can make your own USB installer:
Make Your Own Lion Installer
1. After downloading Lion you must first save the Install Mac OS X Lion application. After Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing Lion.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to several hours depending upon the drive size.
3. Locate the saved Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the InstallESD.dmg disc image to the flash drive as follows:
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the InstallESD.dmg disc image file into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable Lion installer that you can use without having to re-download Lion.
However, if you don't do this you can always redownload the installer by using OS X Lion- About Lion Recovery or by reinstalling Snow Leopard 10.6.8. -
OS X Lion begins installing and then error message comes up that it can't be installed on MacIntosh HD because a recovery system can't be created. What do I do to fix this problem?
What to do if the installer warns that no Recovery HD can be created
Some disk partition configurations may result in the OS X Lion installer reporting that it could not create a Recovery HD. In these situations, even if you are permitted to continue the install, you should quit the install and create an external, bootable OS X Lion hard drive with a Recovery HD, first. You will be able to return to the upgrade to OS X Lion on your computer's boot drive after creating the external Recovery HD.
Important notes
Your storage device must have at least 13 GB available (after formatting) to install Lion and an Internet Restore partition.
These steps will erase and reformat the storage device. OS X Lion: About Lion Recovery will instruct you on setting up the storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install Lion and an Internet Restore partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure will install a version of the OS X Lion that is compatible with the Mac it was created with. Using this Lion system with a different kind of Mac may produce unpredictable results.
Your computer's serial number will be sent to Apple to help authenticate your request to download and install OS X Lion. -
Late in August 2011 I took delivery of a new 27" iMac with Lion preinstalled. I need to run Windows as well. Following Apple's written suggestion, I printed off the then current 12 pages of the document "Bootcamp Installation & Setup Guide" which clearly stated that the hard drive you were going to install on had to have on it, before install, a maximum of one partition. Using finder and disk utility I determined that there was only one partition. Unbeknownst to me, there was (is) an additional hidden (from those two pieces of software) partition on the disk. As of machines delivered new with Lion preinstalled, Apple has begun to include a "recovery partition". In that partition there is a copy of the software necessary to reinstall Lion via a download from the Apple App Store. Not knowing the partition was there, I cranked up "Bootcamp Assistant" which nicely offered to repartition my hard drive creating a "Bootcamp Partition" in addition to the existing. I told it how big to make each and hit the do it button, subsequently destroying my operating system. Oh, it very nicely told me, after the damage was done, how many partitions were REALLY on the disk and that I could not install Bootcamp cause there were too many partitions.
Luckily the the Recovery Partition, which at that point I knew existed, was not harmed and after doing some research on another compter, I used it to once again download Lion from the App Store and reinstall. So, I have recovered but am still stuck with the problem: how do I install Bootcamp in this new environment?First you need to seriously back up your Mac.
A clone is an exact duplicate of your existing Mac HDD. Merely copying and pasting a drive will not make a bootable backup. In case of problems you can boot from an Ext HDD clone and use the utilities to repair, reformat, or clone the Ext HDD back to the internal Mac HDD. While Time machine back ups are easy you can not boot from it. The best thing to have for any kind of problem is a bootable clone backup on an external drive. Some even have two external backup drives in case one fails. There are two good apps for cloning named SuperDuper and Carbon Copy Cloner.
In dealing with the recovery partition a simple approach is to clone the Mac partition to an external disk then re-partition the Mac to a single partition (GUID partition table) . Then clone the external disk clone back to the Mac. You will now have only one Partition and Boot Camp assistant sould not object.
Some have recommended getting rid of the recovery partition while others have advised not to do this. If you have the Lion USB Thumb Drive you do not need a recovery partition so can discard it without concern. There is another way to get rid of the recovery partition if you decide to do it but first be sure to have a backup of your Mac ( I know I sound like a nagging mom but many dead computers have been saved by this simple precaution).
Use Disk Utility.
1) Make the Recovery visible in Disk Utility by using a program like Secrets:http://www.macupdate.com/app/mac/27025/secrets or MacPilot:http://www.koingosw.com/products/macpilot.php (15 day free trial).
2) Highlite the Recovery partition and Control click it and select Mount the partition.
3) With the Recovery partition highlited, erase the partition, you'll get an error message, ignore it.
4) Now highlite the top identity of the hard drive and select the partition tab.
5) Highlite the Recovery partition and press the minus sign.
6) Click and hold on the bottom edge of the partition above and drag it to the bottom, if it doesn't go there automatically, the press apply. -
Partition not big enough to install bootcamp drivers (installed windows 7)
I installed bootcamp, partitioned a drive to 6GB (thought it was 16GB)
installed windows 7 pro and went to install the bootcamp drivers so I can switch back to Snow Leopard and it won't let me install the drivers because the partition is so low on space. I don't have any other application on the windows 7 partition as i just installed it. I even tried to create room by deleting the sample photos, music and videos, which got me to a point where i could start the installation then it stopped cause it got too full again.
How do i get my mac back to snow leopard? OR how do i make my partition larger so I can install the bootcamp drivers?
HELP!Use Boot Camp Assistant to remove the partition. Use Disk Utility to erase free space.
For Win 7 and others you need to be considering a much larger partition size. I would recommend a minimum of 30-40GB. It depends on what you need Windows for. But my needs are such that several hundred GB are usual for my Boot Camp partitions.
Remember that just like Mac OS X, Windows needs free space for paging files and behind the scenes workspace. -
i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!
First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over. -
I have deleted windows7 in the boot camp but the partition macintosh hd2 is still there...if i try to install windows7 again,it is not showing the boot camp partioned space...
Update: I did an extended hardware test (just in case a hardware issue was causing my problem)--no problems found. I then went through the Aperture troubleshooting steps: I tried repairing permissions first, but I still could not see any of the images that were in the Aperture trash. I then repaired the library. This seems to have fixed things (at least upon initial assessment). Afterward, I was able to see the images that were in the trash. I opened the Activity Window to see what it said when I tried emptying the trash again. This time it said it was deleting exactly the number of images that I expected it to delete (not twice as many this time!), and it emptied lickety split--as I had expected it to do the first time! So, hopefully, all is now well with my system and library. Still wondering why it was telling me it was deleting twice as many images as were in the trash the last time I tried, but overall, much happier today!
-
In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?
Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac -
How to properly clean install: erase, partition hard drive, and install tiger then SL
Hello,
I am a noob at this, so if responders would be kind enough to be detailed / specific with any instructions it would be most helpful! I own a dinosaur apparently (even though I don't think so): the white (not unibody) Intel macbook2,1 (late 2006) 1.83 GHz with currently 1GB of RAM, but I have 2x2GB RAM sitting next to me ready for install. However, first I would like to do a clean uninstall of my computer (running OS X 10.6.8 SL). I also would like to properly partition my hard drive while I'm at it.
About 6 months ago I had serious crashing issues, along with kernel panics, hangs, applications randomly appearing & disappearing, system settings and options doing the same, fans running high (probably due to the low RAM available), and basically overall screwiness. So, after trying pretty much every option I could find on this community...and many others... (e.g. clean cache, clean old logs, already did a clean uninstall and install of SL, and much much more) I have reached my wits end. I would say that to date I've wasted a good solid 2 months with this.
The clean install worked for MAYBE a month or so, but then it started acting up again with the fans (even without high pages in/out, CPU or memory usage) and excessive heat, along with the apps freezing and quitting (mind you it would be only two things open such as 1 word document and then firefox-- with flash disabeled). SOOOOOO long story short, I have purchased new RAM and I would like to try this once again, but to ensure I don't screw it up this time I would like some directions as to how to do the uninstall, partition, then reinstall. (currently to date I ensured all updates are completed---even though they are no longer released for SL, and I just did a full backup).
Also, I need to first install Tiger (my original OS) as when I went to do a hardware test the other day this was not an option (and upon further research it is due to me not using Tiger as a first install and then using my mac box set for SL). I didn't use my original OS first because....one issue encountered when I had tried to install Tiger was that my Disc 2 (the applications one) took around 1.5 hrs to complete, but when I reached the last step of glory where I expected it to say COMPLETE it instead said that there was some sort of issue with the disc..........of course).
Any help would be greatly appreciated.1: If near a Apple Store or Authorized Repair, take it to then for a free evaluation, it might have other hardware problems now that it would be a waste of effort even continuing.
2: The RAM needs to be
Maximum Memory
3.0 GB (Actual) 2.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Basically what this means is you can put in a 2GB module and a 1GB module for 3GB total.
I wouldn't proceed with installing RAM just yet, not until you get a stable OS X version on the machine, you might have a hard drive needing to be replaced as well which you can do while inserting new RAM.
3: This User Tip can assist in installing 10.6 Snow Leopard, partition format etc.
How to erase and install Snow Leopard 10.6
Software Update fully immediately after setup.
There is no need to install Tiger, he 10.6 disk contains the full 10.6 version, you can either install the iLife from Tiger disks or use Pacifist from Charlesoft to extract them and place on your new install, then Software update to get them current.
4: If not successful then the drive also likely needs to be replaced, if so choose a 7,200 RPM SATA I w/1.5Gb/s connection.
Install/upgrade RAM or storage drive in Mac's
Repeat #3
If your getting beeping noises or "you need to restart" issues, it's likely one or more of the RAM modules is bad. Have it exchanged or swapped.
I advise good quality RAM the first time, if you buy cheap stuff it's just going back.
Don't go any further than 10.6.8 with that old machine, the performance will be terrible. -
Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.
I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.
Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.
-
Hello Everyone,
I have a MacBook older model with me.I am running 10.7.6 on that, I was trying to use BootCamp to install windows on my mac. Since BootCamp can only work on a single Volume, I partitioned my Hard Disk to one volume.
Using BootCamp I installed windows and everything worked fine. After installing windows and testing everything, I switched back to OS X and this time I tried to make another partition on my single portioned Mac volume and named it Backup. That too worked. Now I have three Volumes
1)Development2)Backup3)BootCamp.
Next when I switched to Windows, It should the classic error, No Bootable device found, please insert a Bootable CD and press any key. When I tried to enter my Mac OS X install DVD and by pressing option key, it does not show me the proper Mac OS X development volume. It keeps going back to the No bootable device found message.
Any help will be much appreciated
Regards
Mithunyou can't add a partition in between - you put Windows to a new partition number.
GPT (GUID)
EFI
Mac HFS
Lion Recovery
Windows
And now you have two HFS
One partition and one Windows (plus Lion Recovery).
If you were to have more, it can't be before Windows for one thing.
Maybe you are looking for
-
How do I get multiple Apple Tv's to show up in Airplay?
I have two apple TV's hooked to my network. iTunes is running on an iMac. When I click the AirPlay icon, only one of my ATV's show up. How do I get both to show? thanks David
-
Can't get printer to finish reading sd card
i placed sd card into hp psc 2410xi photomaster so I can print out a proof sheet. I have more than 1240 pictures on sd card and the printers screen just keeps showing Reading card...It has been doing that for about 10 minutes or more. Is it because t
-
Absolutely Disgusted with the performance of Keynote 6.0
After looking forward to some performance and visual upgrades from apple with the arrival of mavericks, I was shocked at how it has affected a lot of my presentations for work on the new Keynote 6.0. Not only do I now have to go through each and ever
-
Conflict for a XI track in NWDI on the assembly tab
Dear friends, I have defined a XI track in NWDI/CMS. But on Assembly tab I get a conflict error. The log message is: Info:Starting Step Check-assembly at 2008-01-21 17:42:04.0367 +0:00 Info:Checks for software component A_TEST are performed now: Info
-
Is it possible to install a single component from the install dvd?
My install went very well, however the only problem is that the colorsync utility will not launch. I would rather not do a complete reinstall of the entire system... ( particularly because of my shrinking HD). Can I do this? Thanks in advance, Carl