Installing Bundle#1 in peoplesoft but it giving me error
Hi,
I want to install and ofigure SAIP, i have followed peoplebook for this purpose. It is written there that install Campus Solutions 9.0 Bundle #9 (or the multilingual version) and HCM 9.0 Maintenance Pack #4. For this i have downloaded all the required Bundles into my system. I ran change assistant and given all the files to it, it runs and after a little time giving me error that:
Invalid command in boot strap mode
Ended: Sat Feb 18 18:03:30 2012
Unsuccessful completion
i am unable to find such error resolutions on forums and over the other useful sites.
Please help me to out of this, because i have dead line which is very near and i have to implement SAIP.
Regards
Zubair Ali
Zubair wrote:
HCM 9.0 Maintenance Pack #4.
Campus Solutions 9.0 Bundles #7 and #8.
Apply Incident Resolution 768436.
My question is what will be the sequece of all Bndle and MPs? SHoud i install Mps first and then bundle? or i go with Bundles first and then Mps?The MP5 has been released and if I'm not wrong the MP5 cumulative includes all the bundles up to bundle #7. So, why not go for that MP5 then apply bundle #8 ?
Of course, you should check the prerequisites if any.
Nicolas.
Similar Messages
-
i had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help
Hello,
what concerns your wish about an uinstaller, so you should use
https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html >>> AND note this "Read before you download a CS3 product". And esp, "You need your CS3 serial number to complete the installation" but this shouldn't be a problem for you, because you had an official version and so you can use all these informations like https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter -
Indesign cc files not saving but not giving an error message
Indesign CC files not saving but not giving an error message
I have all my restaurant menus in Indesign cc and when emailing them to myself, after changing them to print them from a different computer I experience that the files are not the most updated version.
Can anybody suggest a solution?
Thanks
JanineAsk in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium -
I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!
Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Am trying to install apps from the store but each time am getting a message that a newer version of ipad software is required
Settings > General > Software Update
-
After installing, whenever i try to open the application, it keeps popping up that some or the other .dll file is missing.
When I install that particular .dll file and then again try to re open, it says that someother file is missing. It keeps
coming all the time.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I have just installed ilife on my new computer from my disk. I have several backups of my webpage from my old computer. Everything would be great if I could just run the program. When I click the icon for iWeb I get the following message: Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
Somebody please help! I desperately need to update my website.In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
what can i do please
Return it to wherever you purchased it
Only Apple retail stores in US sell unlocked iPhones
and confusingly they also sell contract free but these are locked to AT&T
However you appear to have an iPhone locked to a US carrier probably AT&T
Only the carrier can unlock an iPhone and if AT&T ,as you are not a customer,
you will not fit their profile for unlocking -
Im trying to install the creative cloud download but i get an error code 204...what is this?
It says there seems to be a problem accessing a critical file/directory during download. Error code 204...has anyone else had this problem?
Hi Patricia,
Please refer to the thread below to fix this error:
Error 204 when downloading Creative Cloud on Mac
Regards,
Sheena -
Install Solaris10 on HP ProLiant ML370 G6, "No Disk" error
Hello,
I want to install Solaris10 on HP ProLiant ML370 G6 servers which are on the Hardware Compatible List( HCL). However, I always encounter "No disk" issue and installation fails. The disks are HP SAS disks.
I searched online and knew that CPQAry3 driver must to be installed first. I did but the "No disk" error still happens later.
I am wondering what else I should do?
TomHi Tom,
You have to apply the ROMPaq Firmware Upgrade before.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=emea_africa&prodNameId=3884311&prodTypeId=15351&prodSeriesId=3884310&swLang=13&taskId=135&swEnvOID=2023
Marco -
I installed itunes 10.5 in my PC to sync with my ipod touch $G but it's giving me error message that itunes could not connect to itunes store..."make sure network is active and try again." I'm connected to internet though so I don't understand please help!
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
When installed JDK but I have problem with System vars may install bundle
When installed JDK but I have problem with System vars may install bundle [netbeans&JDK] WITHOUT UNISTALLING initial JDK or needed uninstall first ?
With the word 'automatically', yes you do need pulseaudio. I'm sure you could cook up some udev or related rule to do that in Alsa, but pulseaudio would be easier.
-
Steve Jobs obviously was "the man" because every update or install now gives me problems... i can no longer download anything to my iphone.. giving me errors of "cannot install at this time" and i get an error installing itunes on my other laptop... wth is going on!??!
ok so the download problem with my iphone.. what could be the cause of that? ive restarted and deleted the "undownloaded app" over 10 times already. and restarted the iphone 10 times... next thing i know i cant install itunes on my laptop.... geez man..
obviously there is a fix which someone will help... but why should i have to go through all that crap to install a so called uncomplicated software... when you think about it this really shouldnt even be an issue.
normally if the thing dosent work. normally with most programs you just uninstall the uncompleted software and just reinstall and everything is usually good to go.. help!ive never had any problems with ap[ple products in the past... this is a first and a stupid problem if you ask me
-
Mac Mini fresh 10.4 install - can't install bundled applications.
Okay so I just got my first Mac last week . It's a Mac mini 1.83 Core 2 Duo. It came with Tiger and ILife bundle, and a Leopard upgrade dvd.
I installed Leopard (erasing the original install) only to find that there is no iLife on it. I tried installing the bundled apps onto leopard using the original dvd's and that kept failing as well.
Now I'm trying to reinstall the OS X 10.4 + bundle (my original grey cds) so that i can upgrade to Leopard and keep the iLife bundle.
1. I erased the drive using disk utility on the Tiger cd's, and reinstalled Tiger along with the bundled apps. This didnt work completely - when it got to the bundled apps, it failed at the end saying install failed - try again. And it doesnt even give me an option to exit - just keep trying the install of disc 2 again and again. I tried this another time and it still didnt work.
2. I tried again from scratch- erasing the drive and reinstalling - this time installing only Tiger without the bundled apps. Tiger installed ok. I did a software update, then tried installing the bundled apps manually. Still it wont install them.
3. I tried installing bundled apps again after #2 failed - still no luck.
The install log says it failed when doing pre-flight check of iDVD. But the second time it failed it was doing a pre-flight check of iPhoto.
Does anyone have any ideas what I could be doing wrong with this thing? I've erased and installed this thing like 6 times already and it still wont do a proper install of the bundled apps!Ah, apologies, for some reason I had thought you were in the UK. Apple Canada don't have quite the same issues of remoteness as Apple UK, so it surprises me further that you have suffered the support issues you have. One of what I would have always considered to be Apple's deficiencies however is that they generally channel their feedback and support via stores and phone contact, rather than providing email or internal corporate contact details. It makes it easy to call for help when needed, but not so easy to let them know what you think about the help you actually received. Calling the phone support line and asking for the call to be escalated up is probably the best approach, and if nothing else will give a better insight, since in my experience most of the customer support calls are handled rather more constructively than your experience so far would suggest.
Ultimately, only you know exactly what your objective is of course, but if you had reached the point that it was clear a Mac was the right system to buy for your parents, then I suspect that you're right, your objective would not be likely to be best served by returning this system and switching to something else. As such, the short-term frustration of having to deal with this now, but having a working and fully installed mini for them to use in the longer term would perhaps be better than extricating yourself from the frustration now and thus gaining in the short term, only to have your parents cope with a less ideal system, even one where instead of an emphasis on ease of use, they would need to focus rather more on security, virus protects etc in a Windows system.
It does, of course, leave a bit of a bitter taste if you were to keep the mini and effectively let Apple get away with such poor support. The only problem is, however, that reacting to it by returning the system hurts them very little, and in reality perhaps does more to impede your own objectives.
Whatever you decide, bear in mind that however poor some of the staffers on the phone can be at times, and how unhelpful some of the staff in the stores, Apple Discussions here is often a very good way to get help and support from people who are just ordinary Apple users. We're not always able to help - there are some questions asked here which don't get responses, but by far and away most do! There are also Mac User Groups in many areas where help can be found (and often a helping hand and a copy of an install disc to help alleviate the frustration of waiting on Apple to post one out). Local Apple stores typically also have 'genuis' bars where help can be obtained, even for equipment out of warranty, and while the quality of support isn't always what one might hope for, it can be truly excellent.
In the end of course the fact that the quality of Apple support may be typically rather better than you have experienced, it doesn't excuse the bad experiences. Often, however, their products go a long way to make up for it!
Best wishes in whatever you choose to do. -
I've been trying to install itunes on windows 7 but apple mobile device will not install
I've finally managed to narrow the problem down to the following file:
C:\Users\xxxxx\AppData\Local\Temp\Rar$DIa0.119\AppleMobileDeviceSupport64.msi: The archive is corrupt
this is the file delivered with itunes and it's definitely causing the problem because when I try to install one I downloaded from
http://www.javakrypt.com/itunes/
it installed ok, however when I try to run itunes the amd driver is installed the ipod connects but itunes has a version issue with the AMD driver and asks for a reinstallation of itunes.
My question to apple is where can I download an incorrupted AppleMobileDeviceSupport64.msi file for the latest release of itunes, and can you pleas everify that the version you are deploying with the current version is not corrupted.(The first file I see when I extract the MSI file has a random character file name with no modified date and a size of 16640. WInrar refuses to extract any files from the msi file.
I believe many people are having this problem and if they can get this file it may their problem as well.OK I've fixed the problem and my thanks go to redmars.com.au (link below plus copy of solution)
http://www.redmars.com.au/blog/itsupport/327
To summarise what I did I
0. the pnputil -e uninstallation didn't work for me so
1. modified the permissions on the C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_hexidecidforyourcomputer folder so that I could access it
2. I deleted the files in this folder
3. Retried the install from command line with log file enabled but it still rolled back, but in the log file I noted it wasn't finding the netaapI64 files and when I checked the above folder these files were missing.
4. I tried copying the files from the msi file using winrar but this failed passing a file corrupted error message and files copied had a zero byte size (i.e. empty)
5. I copied the files from a friends folder who didn't have this problem files are (netaapI64.cat, netaapI64.inf, netaapI64.PNF, netaapI64.sys and wdfcoinstaller01009.dll)
6. retried the install from the command line and it worked. Started itunes connected itouch, it installed the drivers and the itouch appeared in itunes.
I can now access my ipod from itunes.
The only problem now you face now is how to get the uncorrupted files detailed above. Does anyone have a solution to this? Winrar states files are corrupted. but they obviously aren't otherwis ethe installation wouldn't work.
text for solution here follows :
I recently came across a problem on a Windows 7 64bit laptop where Apple's iTunes was failing to recognise a connected iPhone. It was giving a error that the wrong version of iTunes was installed and I should install the 64bit version of iTunes. As I had no idea how what had been performed up until this point I performed a full uninstall of iTunes. I then downloaded the latest version of iTunes 10.5.1 and ran through the installer. At one point during the install I noticed the install gave the message 'Rolling back action' and thought to myself this cannot be good.
At the end iTunes indicated it had a problem installing and I should try again. The weird thing is if you didn't pay attention to the message you could quite easily click on ok and iTunes will work except it'll fail to recognise any iPod, iPhone or iPad device. To help identify what actually failed to install I checked the windows services management console and found the Apple Mobile Device Service was missing. This makes sense because it's that service which communicates with the iPhone. The question is why was the Apple Mobile Device Service (AMDS) failing to install?
To find out I needed to capture a log file of the install process. A bit of research helped me identify that the iTunes64Setup.exe contained 5 separate windows installer files:
AppleApplicationSupport.msi
AppleMobileDeviceSupport64.msi
AppleSoftwareUpdate.msi
Bonjour64.msi
iTunes64.msi
I needed to extract AppleMobileDeviceSupport64.msi from iTunes64Setup.exe so I could generate a install log. The solution is to install WinRAR which you can download here http://rarlab.com/download.htm. After extracting AppleMobileDeviceSupport64.msi to c:\temp (you can use any folder you like here) I opened a command prompt and issued these commands:
cd c:\temp
msiexec -i AppleMobileDeviceSupport64.msi -log AMDS.log
This will attempt to install the AMDS and generate an installation log c:\temp\AMDS.log. Looking through the log I found the install failed because the format of C:\Windows\System32\DriverStore\FileRepository\netaapl64.inf_amd64_neutral_dc2c bd989eec1514\netaapl64.inf was invalid. I opened the file in question and found it to be completely blank. I coulnd't just delete the files in question because they are protected by the Windows operating system, and anyway the correct method to remove a driver package from the driver store is to use the pnputil.exe tool. However if the driver package didn't complete installation in the first place then it may not work, but it was always worth a try.
To use pnputil I needed to run a command prompt as an administrator. I Clicked Start, All Programs, and Accessories, then right-click Command Prompt, and then click Run as Administrator. From the command prompt type I typed in pnputil.exe -e. This produced a list of installed driver packages. Looking through the list I was looking for something like this:
Published name : oem30.inf Driver package provider : Apple Class : Network adapters Driver date and version : 07/12/2011 1.8.4.2 Signer name : Microsoft Windows Hardware Compatibility Publisher
This is the Apple network adapter driver. The important information here is the Published name oem30.inf. To uninstall the driver use the command pnputil -d oem30.inf (replace oem30.inf with the correct published name for your PC). After this try and the install again: msiexec -i AppleMobileDeviceSupport64.msi -log AMDS.log. If this fails or as in my case the driver package doesn't show in the list of installed drivers you'll need to take more drastic (and potentially dangerous to your PC's health!) measures.
By default the files in the driver repository are read only and can only be modified by the Windows Operating System, and this is for a good reason. I needed to change the permissions on the driver package so I could delete the corrupt files. Caution proceed at your own risk, make a mistake here and your computer may stop working and a system restore or rebuild may be required.
The first thing I needed to do was to take ownership of the folder so I could change the permissions. From windows explorer I clicked on Folder and search options under the organize button. Next I clicked the view tab and clicked on Show hidden files, folders, and drives. By unticking hide extensions for known file types and unticking Hide protected operating system files I was able to view the files I needed to remove. From the windows explorer window I browsed to browse to C:\Windows\System32\DriverStore\FileRepository\, which was now visible and right clicked the netaapl64.inf_amd64_neutral_dc2cbd989eec1514 folder and selected properties. I clicked the security tab and then the Advanced button. Under Advanced I clicked the Owner tab and then clicked the Edit button. From the change owner to: box I selected my username, and then ticked Replace owner on subcontainers and objects and clicked OK to set the changes.
Next I gave myself Full Control to the folder and files. Back on the Security tab I clicked the Edit button, and with Everyone highlighted in the Groups or user names I ticked full control in the Allow column. I clicked OK and accepted the warning message Windows presents about security and access problems. At this point I could delete the contents of the netaapl64.inf_amd64_neutral_dc2cbd989eec1514 folder.
I tried re-installing the Apple Mobile Device Service (AMDS) using msiexec -i AppleMobileDeviceSupport64.msi -log AMDS.log command and I no longer got the Rolling back action error. All that I had left to do now was install iTunes again and the iPhone was now recognized when I connected it to the PC.
Maybe you are looking for
-
IWeb 09 and Blogs, Podcasting.....do they work on a Real Domain?
I do not publish to Mobile Me, although I have an account. I have a real Domain that I use. It used to be that certain iWeb functions would NOT work unless you published them to Mobile Me. Is this still the case? Will the Blogs and Podcasting work if
-
I installed PS Elements 10 successfully on a W7 64 bit system. Program run well. Suddenly organizer aborts after showing the pictures. I tried to repair the cataloug file, still same failure. How can make it work again?
-
Sono proprietario di un Iphone4 da un paio di mesi ed ho notato che i contatti memorizzati da chiamate ricevute non entrano nell'archivio CONTATTI . Cerco di spiegare meglio il problema, indicando qui di seguito la procedura addotta: 1) ricevo una te
-
When is apple going to fix ios8 problems?
I don't want to know how to write a good question, I want to know when Apple are going to fix the ios8 problems?
-
Service order IW32 - change header data while saving with UE
Hello I have the following problem. I need to clear while saving order in IW31/2 one single fields this is CAUFVD-ABGSL but I cannot find any user exist that could allow me to CHANGE this field I tryied to use : IWO10009 IH-Auftrag: Kundenprüfung zum