Installing Business Content: cubes under Unassigned InfoArea

Why are alot of BC cubes that i installed showing under "unassigned" info area?
Please help
Thanks
Fran

Hello
How ya doin guys ?
When u drag and drop the Objects from the BC into the Collected objects the InfoArea / Application Component / IOC will also be Collected. Then in the GROUPING select ONLY NECESSARY OBJECTS.
Also, if u expand the collected InfoCube the InfoArea and InfoObjects will be displayed, check the InfoArea checkbox under INSTALL.
This will install the InfoArea and the InfoCube organized under that InfoArea.
Hope this Works....
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

Errors while installing Business Content

Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
Jaswantha

Hi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM

How to install the Business Content Cube 0PP_C02

Hello,
Can you please explain me how to install the Business Content Cube 0PP_C02 .
What are the nesessary steps involved in this process. How this Standard Cube is available in
AWB -> Modeling.
What are the nesessary steps involved in the R/3 side.
CAn you please help me in this.
Thanks alot.
Regards,
Anitha

Hi anitha
TRy this
To transfer and activate a DataSource delivered by SAP with Business Content, in transaction SBIW in the source system choose Business Information Warehouse à Business Content DataSources or Activating SAP Business Content àTransfer Business Content DataSources.
The following figure displays the DataSources in an overview according to the application component.
       2.      Select the nodes in the application component hierarchy for which you want to transfer DataSources into the active version. Do so by positioning the cursor on the node and choosing Highlight Subtree.
The DataSources lying under the subtree and other subtrees are selected.
       3.      To check for differences between the active and delivery versions of the DataSources, choose Select Delta.
DataSources for which differences were found in the check (for example, due to changes to the extractor) are highlighted in yellow.
       4.      To analyze the differences between active and delivered versions of a particular DataSource, select the DataSource and choose Version Comparison. The application log contains further information regarding the version comparison.
       5.      To transfer a DataSource from the delivery version into the active version, select it in the overview tree using the button Highlight Subtree and choose Transfer DataSources.
If an error occurs, the error log appears.
Regardless of whether data has been successfully transferred into the active version, you can call the log by choosing Display Log.
       6.      To provide the active version of the DataSource in the connected BI systems and to enable data extraction and transfer, replicate the DataSource(s) with a metadata upload to the BI system.
and in RSA1 in businuess content search ur required cube and select all the req fielsds in the next colums and select before and after is a must..in the selection field..
this will solve ur issue..
Prasanna

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

BI 7.0 install Business Content

Hi,
I am using BI 7.0, when I install business content for cube, even I select " in dataflow before", I can not see infoobject catalog. How can I install the catalog?
Thanks
Victor

HI:
Try the grouping option "all objects in dataflow before and after".
Thanks for points
Best Regards -
Ron Silberstein
SAP

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description)        : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1.     On the Data Warehousing Workbench: Business Content screen:
a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
c.     In the left hand frame, select Object Types.
d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2.     In the Selection of Query Objects dialog box.
a.     Select the following InfoObject catalog:
0CHANOTASSIGNED
b.     Choose Transfer Selections.
c.     If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3.     At the top of the right frame, choose Install and select Install in Background.
4.     In the Install Business Content in the Background dialog box choose Yes.
5.     In the Information dialog box choose Continue.
6.     Choose Exit.
please advise on how to continue.
thanks and regards

Installing Business Content

Hi,
I am trying to install Business Content Object.The object was installed without any errors.But i am not able to see the object in Modelling.
When checking in the Meta data repository its showing the object as active.
I checked to which info object catalog it belongs to.
That catalog is not active in Modelling. I checked Unassigned nodes also, the object is not present there.
Any help would be greatly appreciated!
Thanks,
Jyothi.

Hi Manu,
I checked in Unassigned nodes, its not there. And there is no relevant Info object catalog present in Modelling.
Can you guide me what exactly to do.
Thanks,
Jyothi.

How to install business content?

Hi All,
could anyone tell me the detail process of how to install business content?
i did an exercise yesterday on SD module from extracting data from R3 to BW, after active the datasource in R3, i need to install the related BCT objects on BW side.
can i choose one object and using the option of grouping 'in data flow before and afterwards', does this method install all of the necessary objects on BW side?
it would be nice if anyone can provide me with the material on how to install BCT objects in detail. thanks in advance.
Eileen

HI Eileen,
while installing the business content objects u have to select the dataflow before and after in gruping , after that u have to select the only which SD data source u want to install, and same way selet the queries .
if u not select like this all objects will install under this sd cuve related , so select what ever u want...
thanks
kk

How do I install Business Content?

Hello everybody,
I'm wondering how to install Business content in our BI. After downloading the latest BC from the SAP server I got 2 files on my computer:
KIBIIIH.CAR (510MB) and KIBIIP9.SAR (40MB). I searched for any guide how to get those files into the portal but didn't find anything.
Do you know how I can install this Busines Content?
Best Regards
Christoph

Business Content is delivered as an add-on to SAP BW. The naming is BI Content 3.5.3 Add-On SP06. This is referred as Business Content
Purpose
Business Content is a pre-configured set of role and task-relevant information models based on consistent metadata in the SAP Business Information Warehouse. Business Content provides selected roles within a company with the information they need to carry out their tasks.
This information model includes integral roles, workbooks, queries, Info Sources, Infocubes, ODS objects, key figures, characteristics, update rules, and extractors for SAP R/3, mySAP.com Business Applications, and for other selection applications.
Business Content can:
be used in particular industries without being modified
be modified, meaning you can work with it to any degree of detail
serve as a template or an example for customer-defined Business Content
Moreover, [image: Structure link]Demo Content<http://help. sap.com/saphelp_ nw04/helpdata/ en/67/f3013872af 2946e10000009b38 f8cf/frameset. htm> which includes example data and can be used as display material, is available to you with the SAP Business Information Warehouse.
Implementation Considerations
On one hand SAP Business Information Warehouse's comprehensive Business Content enables a quick and cost-effective implementation. On the other hand, it provides a model that can be used as a guideline during implementation using experience gained from other implementations.
Features
SAP Business Information Warehouse delivers pre-configured objects under the collective term "Business Content". These objects speed up the implementation of the SAP Business Information Warehouse because they deliver complete solutions for business information requests.
Business Content includes:
R/3 extractor programs
Data Sources
Process chains
Info Objects
Info Sources
Data targets (Infocubes and ODS objects)
Variables
Data mining models
Queries
Workbooks
Crystal Reports
Web templates
Roles
For Installation: go through this link.*
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm

Install Business Content

I want to install business content.
I have the problem, that I do not really know where to get the content.
After installation of BW I am not sure where I can get content objects and how to get them into my bw environment.
Example:
1. I found an object I would like to add to my bw content. 0RPM_C03 on help.sap.com
2. How can I get that content into my Warehouse?
I can't find that in RSA1 even not in deactivated status.
Can I create a connection to sap for direct load that content? Or is it possible to upload content?
Edited by: Ezachiael leaihcaze on Dec 4, 2009 1:51 PM

Ok, I'll give you some more details.
1. Go to transaction RSA1
2. In the menu on your left (Modeling, Administration, etc.) choose BI Content
3. Below BI Content, choose Object Types for easy browsing
4. Find the business content element (query, cube, whatever) you want to install
5. Drag it to the right side of the screen
6. Click the button "install"
Good luck!
Kind regards,
Alex

Installing Business Content and Merge - Overwrites InfoSource - Very Urgent

Hi Gurus,
I was installing Business Content for a Cube with the grouping Data flow before using Merge/Copy option in DEV.
The cube got activated and all the objects associated with it. What I didn't realize was that the InfoSource used for the DSO of the cube was also used by a custom DSO which has already been deployed in QA.
So the transfer rules were only partially maintained and the content InfoSource merged with the active one. The DataSource for the custom DSO is from QA (a different R/3 from DEV R/3). The issue is that the custom DSO in QA is now linked to the installed (new) InfoSource belonging to the DataSource of the DEV R/3.
Please kindly guide on:
1. How to change the InfoSource for the custom DSO from the currently installed one to the original one? Can I deactivate the update rules and create new InfoSource and transfer rules for the custom DSO and transport it again to QA?
2. What are the implications this might have on the newly installed DSO & Cube?
All answers will be suitably rewarded.
Thanks,
Swetha

Hi Swetha,
I am not too sure, if i understood ur problem correctly but,
If your BI QAS system is still good.. that means ur custom DSO is still linked to old version of Infosource in BI QAS.
The talk to ur BASIS guys and ask them to transport the Insource/Transfer Structure from BI QAS system to BI Dev system.
This can be done by creating a transport in BI QAS system, the type of transport should be Transport of Copies.
and also before importing this Trasnport from BI QAS in BI Dev System maintain an entry in BI Dev system RSA1>Tools>Conversion of Logical System names and put an entry as Source = ur BI QAS Logical System Name and target as ur BI Dev Logical System name.
Cheers
CK

Is it possible to create a copy cube from business content cube

Dear Experts,
I have to create the new cubes which is a copy of Business content statistics cubes .
Request you to let me know how can i create a copy cube from Business content cube. My doubt is,weather is't the same as normal customized cube creation by giving copy from option.....
Thanks in advance for your valuable assistance.
Regards,
Ramesh - Kumar.

for copying the cube whose copy is to be made should be available in infoprovider tab in modelling of RSA1.
first you have to install the business content cube ,so that it is found in the Info-providers tab in modelling .
for that,first go to business content option found in the modelling tab of t-code RSA1 .
find the cube and transfer it to the right and execute . It will be available in infoprovider tab of modelling .
then you can create a copy as we do normally .

How to select the all object at a time while installing business content

Hi All,
how to select the all object at a time while installing business content Please let me know if nay document is there
Thanks Ahmed Pasha

Hi,
Please check out the below links
[Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
[BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
Hope it helps.
Regards,
AL

How to install Business Content of SAP BW

Hi BW guru's
Can anyone tell how to install business content in bw.
we have installed central instance , data base instance and bw component then stuck up can any one help where and how to install Business content
Thanks in advance
Regards
Srini--

Hi Srinivas,
To install and activate the business content, you can do that using RSA1 and then going to the business content tab. select the required objects and drag and drop them to the right side window. Then click on the Activate and install button to install the business content.
You can make use of the grouping option available, to install the required objects together.
Hope this helps...let me know if you need any further info on this.
Best Regards,
Nene.
<i>Dont forget to assign the points if the answer is helpfull.</i>

Installing Business Content: cubes under Unassigned InfoArea

Similar Messages

Maybe you are looking for