Installing Business content in SRM

Hi,
I am trying to bring data from SRM to BW basically for contract management and vendor evaluation.Someone has already done Transfer Component Hierarchy.But this is all under <b>nodesnotconnected</b>.And most of them dont have text.What can I do to get back the text and datasources are under proper nodes instead of <b>nodesnotconnected</b>.
2.I have datasources under these nodes TCT-MON-IO,TCT-MON and TCT.All these relate to metadata. Do I have to transfer all these datasources to BW or how should I go about it.
Thanks,
Kal

Kal
First you have to install application components and Infoareas and then activate all business content by selecting before and then after. It should take care of your issue.
Thnaks
Sat

Similar Messages

  • Unable to 'set the default source system' to Install Business Content

    Hi,
    Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
    I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
    When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
    Could you please help me out?
    Thank you.

    Hi,
    It seems to be a bug in version 3.5.
    Do like this:
    After you open the screen to <i>choose the dafault source system</i>
    Clcik on 3rd button(F6) available in the bottom of the scrreen.
    And then select teh tick mark for required system.
    And then click on Continue button
    You have do this step before you drop the cube to right side of the cube.
    Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
    Drag and drop required cube with dat flow before.
    Now you can see the Transfer rules with selected Source system only in the collected Objects.
    With rgds,
    Anil Kumar Sharma .P

  • How to select the all object at a time while installing business content

    Hi All,
    how to select the all object at a time while installing business content Please let me know if nay document is there
    Thanks Ahmed Pasha

    Hi,
    Please check out the below links
    [Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
    [BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
    Hope it helps.
    Regards,
    AL

  • Errors while installing Business Content

    Hi,
    It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
    To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
         Now when I am trying to install I am getting these errors
    Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
    Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1     
    Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
    InfoPackage  no longer exists in object version A in table RSLDPIO
    Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
    InfoPackage  no longer exists in object version A in table RSLDPIO
      There many errors of this type.
    How to solve the problem. Please help me.
    Thanks in advance.
    Jaswantha

    Hi Jaswantha,
    Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
    This is as per my observations so far according to SAP Best Practices.
    Pls. try this and get back.
    Hope it helps
    Regards
    PPMM

  • How to install Business Content of SAP BW

    Hi BW guru's
    Can anyone tell how to install business content in bw.
    we have installed central instance , data base instance and bw component then stuck up can any one help where and how to install Business content
    Thanks in advance
    Regards
    Srini--

    Hi Srinivas,
    To install and activate the business content, you can do that using RSA1 and then going to the business content tab. select the required objects and drag and drop them to the right side window. Then click on the Activate and install button to install the business content.
    You can make use of the grouping option available, to install the required objects together.
    Hope this helps...let me know if you need any further info on this.
    Best Regards,
    Nene.
    <i>Dont forget to assign the points if the answer is helpfull.</i>

  • BI 7.0 install Business Content

    Hi,
    I am using BI 7.0, when I install business content for cube, even I select " in dataflow before", I can not see infoobject catalog. How can I install the catalog?
    Thanks
    Victor

    HI:
    Try the grouping option "all objects in dataflow before and after".
    Thanks for points
    Best Regards -
    Ron Silberstein
    SAP

  • OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content

    Hi
    Error occured while installing business content
    ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
    Please help me how to resolve the issue
    Regards
    ASR

    Hi,
    Check in SDN... becasue there are n number of resons for that..
    /thread/1056689 [original link is broken]
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
    Thanks
    Reddy

  • Source System Assignment  while Installing Business Content

    Hi,
      I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
    Please Advice
    Thanks

    Hi Shurobhi
    with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
    On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
    Hope this helps
    Regards
    Pradip

  • Error when Installing Business Content BW 3.5

    Hello Everyone,
    When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
    Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
    Message no. RSO296
    Diagnosis
    You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.                                              
    Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
    Message no. RSO252                                                                               
    Diagnosis                                                                  
    You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
    Please help me to solve these problems.
    Regards
    Sanjiv

    Hi Sanjiv,
    Check the below thread:
    Error when Installing Business Content BW 3.5
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
    Reg
    Pra

  • Error installing Business Content: InfoObject Catalogs

    hi all,
    just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
    I'm trying to activate:
    InfoObject Catalog (technical name) : 0CHANOTASSIGNED
    InfoObject Catalog(description)        : Unassigned characteristics
    upon installation here is the job log that i got:
    Message text | Message class | Message no. | Message type
    Replication completed successfully | RSAOLTP | 33 | S
    Replication completed successfully | RSAOLTP | 33 | S
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
    Assign a package | TR | 709 | S
    Specify the package or flag it as a local object | TR | 742 | E
    Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
    what seems to be the error here?
    thanks and regards,
    karl

    hi chintamanim,
    thanks for the response.
    i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
    does this have an effect on the error i got from activating and receiving the error upon activation?
    The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
    I did follow a document for Building Block Configuration Guide:
    B03: General Settings for BI Integration
    and the step is included here:
    Activating Business Content: InfoObject Catalogs:
    1.     On the Data Warehousing Workbench: Business Content screen:
    a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
    b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
    c.     In the left hand frame, select Object Types.
    d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
    2.     In the Selection of Query Objects dialog box.
    a.     Select the following InfoObject catalog:
    0CHANOTASSIGNED
    b.     Choose Transfer Selections.
    c.     If a dialog box Remote Activation in the Source System <…> occurs, choose OK and log on to the source system on the following screen.
    d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
    3.     At the top of the right frame, choose Install and select Install in Background.
    4.     In the Install Business Content in the Background dialog box choose Yes.
    5.     In the Information dialog box choose Continue.
    6.     Choose Exit.
    please advise on how to continue.
    thanks and regards

  • Error installing business content

    Hi Experts,
    i am getting an error while installing business content for sales and distribution.
    i.e-The creation of the export DataSource failed,
    The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
    could any body help.

    Hi
    The DS should be Activated at R/3 to Install the Business Content on BI side.
    Recheck the same with the following
    R/3
    RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
    BI Side
    Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
    http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
    Hope it helps and clear

  • Issue installing business content

    Has anyone out there come across the following error message while trying to install business content:
    Object 2LIS_11_VAITM (InfoSource) could not be collected for object ()
    Message no. RSO296
    Diagnosis
    You have collected objects in the BW Metadata Repository. Associated objects for the object  of type  have also been collected. Object 2LIS_11_VAITM of type InfoSource was among these objects. This object
    2LIS_11_VAITM of type InfoSource, is not, however, available in the Metadata Repository.
    System response
    Object 2LIS_11_VAITM of type InfoSource is ignored in further collections. The links for object  of type  are incomplete. This may result in not being able to activate this object.
    Procedure
    If this error occurs while you are installing Business Content, a delivery error may have occurred. Inform SAP. In all other cases, check, for example, that the object has not been deleted by another user during the collection.
    I am assuming somethign went wrong during the installation of the box, but just wondering if anybody has any ideas on this.
    Thanks.
    Dan

    Have you activate and replicated the datasource 2LIS_11_VAITM before activating the business content?

  • Installing Business Content

    Hi,
      I am trying to install Business Content Object.The object was installed without any errors.But i am not able to see the object in Modelling.
    When checking in the Meta data repository its showing the object as active.
    I checked to which info object catalog it belongs to.
    That catalog is not active in Modelling. I checked Unassigned nodes also, the object is not present there.
    Any help would be greatly appreciated!
    Thanks,
    Jyothi.

    Hi Manu,
      I checked in Unassigned nodes, its not there. And there is no relevant Info object catalog present in Modelling.
    Can you guide me what exactly to do.
    Thanks,
    Jyothi.

  • How to install business content?

    Hi All,
    could anyone tell me the detail process of how to install business content?
    i did an exercise yesterday on SD module from extracting data from R3 to BW, after active the datasource in R3, i need to install the related BCT objects on BW side.
    can i choose one object and using the option of grouping 'in data flow before and afterwards', does this method install all of the necessary objects on BW side?
    it would be nice if anyone can provide me with the material on how to install BCT objects in detail. thanks in advance.
    Eileen

    HI Eileen,
    while installing the business content objects u have to select the dataflow before and after in gruping , after that u have to select the only which SD data source u want to install, and same way selet the queries .
    if u not select like this all objects will install under this sd cuve related , so select what ever u want...
    thanks
    kk

  • Installing Business Content blog

    Can u plz tell me how to install Business Content with screen shots. If someone know BI Blog then please give me.
    my id is : [email protected]
    amit shetye

    Hi,
    Go through the below links for procedure for Business Content Installation.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
    Regards,
    Sreedhar

Maybe you are looking for