Installing CAD 7.5(8) on Windows 7

I'm trying to install CAD 7.5(8) on Windows 7. This version is supposed to be compatible with Windows 7. However, when I try to install I get the following error:
File 'sllapi.dll' can not be found. Make sure the file is on target system or installed already.
I have also attempted this install on two different Windows XP systems with SP3. I get the same error.
I have searched through this support Community, Cisco.com, google and I just can't find anything on it.
Thanks in advance for your help.

I am trying to install the client on a window 7 PC. The file is setup_CAD_758.exe from www.cisco.com

Similar Messages

CAD is not supporting in windows 8

CAD is not supporting in windows 8. Has there no any solution to install CAD in windows 8?

Hello
In order to run CAD within a Windows 8 environment, you would have to run or upgrade to UCCX 10.5.1 and your Windows version would have to be 8.1.
http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.5(1)
Hope this helps
Tony
Pleas rate helpful posts

CAD 7.5.8 on Windows 7

Hi all,
Has anyone running CAD 7.5.8 on Windows 7 ? Any issues/concerns that you can share ? Thanks in advance !!!
I am currently running CAD 7.5.8 with UCCE 7.5.8 and all CAD clients today are running Windows XP sp2. I would like to find out if CAD 7.5.8 is compatible with Windows 7 as I will be migrating all client machines to Windows 7 soon. I looked at the release notes on CAD 7.5.8 but didn't find anything on Windows 7.
Thanks again !!
D.

Read the CAD Guide again - it's all there, although not that well explained.
On the Primary:
1. Backup the CAD LDAP (Directory Services) using the CDBRTool.exe
2. Backup the RASS using BackupDB.bat
3. Log out the Domain Admin and log in as the local admin
4. Run PostInstall.exe and make screen shots of the current config to help you later.
5. When you get to the Replication screens, remove replication
6. Turn off the Secondary now.
7. Run setup_761.exe
8. After install, the config tool opens, so enter the details using your screen shots. It doesn't matter that much because when you get to the end, you are going to import the config from the LDAP.
8. At the Recording and Statistics Database step, check the button “Restore recording metadata (BackupDB)” and use the “Browse” button to navigate to where you saved the RASS DB.
9. At the Restore Backup step, check the button “Yes” under “Do you have saved data?” and enter the Backup Folder Location
Press the Save button.
10. Cancel the Licencing Application if it pops up
Do the secondary in a similar way.
Then back to the primary and set up replication on both LDAP and RASS. Make sure you are local admin.
Apply the 7.6(2) MR
Regards,
Geoff

Installing CAD services

I've removed the following service "Recording & Playback Service" from Cisco Desktop Administrator page , and I want to reinstall it again , cisco document say to check the CAD installation guide but I've never seen any line talking about how to return this service again , the following is what cisco doc say:
To restore a removed service to Directory Services:
1. Start the removed service.
■ If you uninstalled the service, reinstall it. See the Cisco CAD Installation
Guide for information on installing CAD services.
■ If you have not uninstalled the service, stop the service and then restart
it, using the Windows Services utility in Control Panel.
2. In Desktop Administrator, click the VoIP Monitoring Device node again. The
refreshed page shows that the service is restored to the list of available
services."
any advice and suggestions will be greatly appreciated.
Thanks

Hi
If I recall correctly it reappears after service restarts. I'd just reboot the server completely.
Aaron

How do I install iTunes 10.5.3 on Windows Vista?

I've been trying for some time to install iTunes on my computer for some time now. As I'm sure you're aware, the iPod Touch currently requires 10.5.3 in order to operate. Here are the issues I've been having:
After the I run the Setup and the iTunes Installer starts to run, this message pops up maybe two minutes into the process:
An error occured during the installation of assembly
'Microsoft.VC80.CRT,type="win32".version="8.0.50727.
6195",publicKeyToken="1fc8b3b9alel8e3b",processo
rArchitecture="x86"'. Please refer to Help and Support
for more information. HRESULT: 0x80070002
I click Okay, and the installation process continues, up until the Status bar reads "Starting Services," at which point:
Service 'Apple Mobile Device' (Apple Mobile Device)
failed to start. Verify that you have sufficient privileges
to start the system services.
Clicking "Retry" yields the same result, clicking "Ignore" skips to the end of the installation process, and clicking "Abort" rolls back the process and restarts at a certain point, until the end of the installation. I get the "Congratulations!" screen, click "Finish" to exit the installer, but when iTunes tries to start up:
Apple Application Support was not found.
Apple Application support is required to run iTunes. Please
uninstall iTunes, then install iTunes again.
Error 2 (Windows error 2)
I have uninstalled and reinstalled iTunes several times. I have restarted the computer after uninstalling and waited to reinstall. Nothing seems to work. All of this is exactly what occurs and quite frankly, it's more trouble than it's worth. If anyone has any suggestions, please let me know ASAP.

The forums for members of Apple's developer programs are here:
http://developer.apple.com/devforums/
If you're not doing development yourself, I would advise against installing either iTunes 10.5 or especially iOS 5. Both are beta software and almost certainly have faults and incomplete features. You definitely should not install iOS 5 on any device you depend on for general use.
Regards.

How to install a plugin on 64 bits windows 2008 server?

From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

Installing Adobe Photoshop 10. Using Windows 7 and IIE. Get message "error:1"

Installing Adobe Photoshop 10. Using Windows 7 and IE. Gt message "error:1"

Not sure what CS3 is. Attached is a screen shot of the error message I get when trying to use Photoshot Elements 10.
Looks like I can't attach a Word or PDF document or paste an immage.
This forum may not be very user friendly.
Let mehttp:// know if there is another way to communicate.
Thanks,
Phil
<Removed by Moderator>

Adobe creative cloud set up to install on a mac with parallels windows 8

Unfortunately it is not possible to install the program it always displays an error message. how can you loess the problem?
error message: This application can not be run from a network drive-. copy it to a local folder and strarten it again.

I have just the regular version, not Professional.
I mean "les integrated", in the sense that you really run Fusion "in a window". The more "integrated" approach means that Windows applications run as if they were for the Mac, and you do not see the Windows interface at all. I personnaly think tjat is too confusing. There is nothing wrong with it, just a bit more confusing. i like having it clear that Windows is in a seperate Window.
Op 21 nov. 2013 om 12:57 heeft Krishnam <[email protected]> het volgende geschreven:
Re: adobe creative cloud set up to install on a mac with parallels windows 8
created by Krishnam in Adobe Creative Cloud - View the full discussion
Hi MacLesNL,
Which version of VM Ware should I go for?
http://www.vmware.com/uk/products/fusion/
http://www.vmware.com/uk/products/fusion-professional/
So that I could install Adobe CC on Windows 7? Please advise.
What do you mean ny "less integrated"? Is this must to run Adobe CC in VMWare on Mac?
Please advise.
Thanks, Krishnam
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5861525#5861525
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5861525#5861525
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5861525#5861525. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Creative Cloud at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I am having trouble installing Adobe Creative Cloud on my windows 7 laptop

I am having trouble installing Adobe Creative Cloud on my Windows 7 laptop; i keep getting an error message
this is what I get
-- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} ----------- ERROR: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation. MSI Error message: Error 1316.A network error occurred while attempting to read from the file C:\Windows\Installer\AcroStan.msi ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

http://helpx.adobe.com/creative-suite/kb/error-1603-fatal-error-occurred-1.html
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Mylenium

Can't get adobe reader to install on my new laptop with windows 8

I can't get adobe reader to install onto my new laptop with windows 8. Basically what happens is that I start the download from the adobe screen by clicking the yellow download button, then I click run (I've also tried save and run), then I allow the program to make changes to my hard drive, and then finally a blank grey box appears in the in the middle of the screen, titled "adobe reader installer". After this box appears nothing else happens. I've let it sit for at least 30 minutes and still nothing. I've also disabled my pop up blocker, and set the security settings to default as suggested in other posts. Unfortunately this is the only pdf program that works for the site we have to use to write contracts, so I need to get this figured out asap. Thanks in advance for any help and advice.

Try installing from http://get.adobe.com/reader/enterprise

Error while uninstalling and then re installing sharepoint 2013 on same server(windows server 2012)

Hi All,
I have installed SharePoint 2013 prerequisites successfully on windows server 2012. While installing SharePoint 2013, system struck on for several minutes. I have restart my system manually. Later I then installed prerequisites which showed a successful
lessage. But When I try to install SharePoint 2013. I am getting the following error:
trial editions and lincensed editions of SharePoint, Project Server, and Office Web apps products may not be installed on the same server.
I am unable to find solution for this issue. what is the solution for this?
Thanks in Advance..
Prem Kumar

To be honest, the quickest thing you could do (and what I would do regardless) is re-build the server (re-install Windows).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Basic questions regarding installing Forefront EP Client 2010 on Windows 2012 R2

Hi,
We have a handful of servers and client machines (although these always seem to be expanding) and as such have previously just installed the Forefront Endpoint 2010 Client manually onto the various endpoints with updates being pushed via WSUS from a Windows
2008R2 machine, without running to a full installation of SCCM or the Forefront Endpoint Server. However, trying to install the FEP 2010 client directly onto new Windows 2012R2 servers result in a "This OS is not supported" error.
After checking some articles it appears that FEP 2010 might well be supported on Win 2012R2 (and Windows 8), but only if installed via SCCM. Is this correct?
We do have access to SCCM 2012, but again I have shied away from this. I had hoped that maybe the SCCM Endpoint client could also be installed manually once more, but trying to install this on a Windows 2012R2 machine results in a "Windows compatibility
mode is not supported by this program" error.
Am I barking up the wrong tree and will I now have to finally learn and install SCCM? If so I take it that I can update my 2008R2 WSUS server to firstly Win 2012RS WSUS, then add SCCM 2012?
Cheers
Chris

Hi Joyce,
Thanks for the feedback.
Hi,
>>After checking some articles it appears that FEP 2010 might well be supported on Win 2012R2 (and Windows 8), but only if installed via SCCM. Is this correct?
According to the blog below, Forefront Endpoint Protection 2010 with Update Rollup 1
is supported on Windows Server 2012 R2.
http://blogs.technet.com/b/configmgrteam/archive/2013/09/16/support-questions-about-win-8.1-and-winsvr-2012-r2-for-configmgr-and-endpoint-protection.aspx
Please make sure you are running FEP 2010 update rollup 1. You could get it from the following link.
http://support2.microsoft.com/kb/2907566/en-us
Thanks for the feedback. I should have said that I have indeed tried this. From the initial link you posted I found the "Update Rollup 1 for Forefront Endpoint Protection 2010" (http://support2.microsoft.com/kb/2551095/en-us), however, this update
itself apparently requires a prerequisite. Whist I have tried to install the prerequisite (http://support2.microsoft.com/kb/2554364/en-us) and the Forefront Update Rollup 1 directly onto a a Windows 2012 R2 machine, I end up with errors:
Installing the Prerequisite result in a "Error code: 1642" in the log file. Have have tried to chase this error, but have not spent too much time digging as yet, but this appears to be more to do with the FEP server than the client.
Installing with the FEP Update Rollup (obviously without the prerequisite), give us three folders (FepExt, FepReport and FepUx), none of which seem to be the client per se
>>Ah, the later problem of trying to install a client from SCCM 2012 onto Windows 2012R2 maybe because I have been using SCCM 2012 SP1, and not SCCM 2012R2??
In SCCM 2012, Endpoint Protection 2012 is integrated so you cannot install FEP 2010 in it.
Best Regards,
Joyce
No no, What I meant was that I had hoped that I could install the client contained within SCCM 2012 R2 installation material manually onto a vanilla Windows 2012 R2 box (which is what I'm trying to do), in the same way that I could install the FEP 2010 on
previous Windows OS. The ISO that I have currently from our systems team is that of SCCM 2012 SP1, not SCCM 2012 R2, and the client within the SP1 package does not install in Windows 2012 R2. I'm tyring to get hold of the SCCM 2012 R2 ISO now, which (from
what I read) should allow me to manually install the client.
I may well play with SCCM later, but is a little over kill for our estate (read 10's of servers and clients, rather than 1000's), however, we should have a campus licence for SCCM.
Regards
Chris

I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

Hellooo Apple Community!
I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
Thankyou thankyou thankyou!
Natalie.

I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode. Both times it indicated a failed read test on the HDD. The last two tests also failed. I forget what those tests were called.
I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

Installing CAD 7.5(8) on Windows 7

Similar Messages

Maybe you are looking for