Installing CCB 2.3.1 on Windows 2008 R2 Standards 64 bit Edition Error

i Installed the Micro Focus Server v5.1 and java 1.6._23 build , Activer Perl 64 all are 64 bit software, all software are installed.
When i run the CCB server i am getting the follwing Exception
this is one Exceptio
1. C:\opt\MicroFocus\Bin\CBLJVM_SUN.DLL: Can't load IA 32-bit .dll on a AMD 64-bit platform
The other Exception are here
- 2011-05-10 21:06:04,336 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) Exception in thread "Remote JVM:3 Thread 1" java.lang.UnsatisfiedLin
kError: <h1>no cbljvm_sun in java.library.path</h1>
- 2011-05-10 21:06:04,446 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734)
- 2011-05-10 21:06:04,555 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.Runtime.loadLibrary0(Runtime.java:823)
- 2011-05-10 21:06:04,664 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at java.lang.System.loadLibrary(System.java:1028)
- 2011-05-10 21:06:04,774 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.microfocus.cobol.RuntimeSystem.<clinit>(Unknown Source)
- 2011-05-10 21:06:04,883 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.CobolThread.run(CobolThre
ad.java:30)
- 2011-05-10 21:06:13,790 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) java.lang.RuntimeException: No command runner was registered with th
is remote JVM after waiting 10000ms
- 2011-05-10 21:06:13,790 [JVM 3 INFO logger] INFO (cobol.host.ProcessLogger) - 2011-05-10 21:06:13,790 [Remote JVM:3 Main ] INFO (cobol.host.Re
moteJVM) Shutting down loggers and exiting Remote JVM 3
- 2011-05-10 21:06:13,899 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.waitForServerTo
RegisterRunner(RemoteJVM.java:163)
- 2011-05-10 21:06:14,008 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) at com.splwg.base.support.cobol.host.RemoteJVM.main(RemoteJVM.
java:121)
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.OptimizedRemoteExecuterStub) An exception occurred invoking remote command.
- 2011-05-10 21:06:15,290 [pool-2-thread-1] INFO (cobol.host.RemoteJVMConnectionImpl) Connection to JVM 3 being shunned
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RemoteJVMConnectionImpl) An exception has occurred calling the remote JVM
- 2011-05-10 21:06:15,290 [pool-2-thread-1] ERROR (cobol.host.RotatingCommandRunnerProvider) Caught exception in Remote JVM connection housekeeper:
com.splwg.base.support.cobol.host.InputClosedException:
The following stacked messages were reported as the LoggedException was rethrown:
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception has occurred c
alling the remote JVM
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception occurred invok
ing remote command.
2011-05-10 21:04:47,084 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Disc
overing lookups for ccb
- 2011-05-10 21:04:47,521 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (shared.context.ContextLoader) Done
discovering ccb lookups (generated=486, manual=126), time 443.179 ms
- 2011-05-10 21:04:47,834 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN (shared.environ.ContextManagedObjec
tSet) Could not load resource com/splwg/cm/domain/contextManagedObjects.xml on classpath. This may be harmless but could mean a problem with the clas
spath. Please verify that the classpath for application cm is correctly configured.
- 2011-05-10 21:05:02,490 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering lookups
- 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 66
2 lookups registered, time 841.526 ms
- 2011-05-10 21:05:03,334 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
LookupHelper) Initializing constants on 696 lookup interface classes
- 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ComponentContainer
LookupHelper) Done initializing lookup constants, time 710.220 ms
- 2011-05-10 21:05:04,037 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering Entities
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 89
8 entities registered, time 3,979.833 ms
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
gistering Code Description queries
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) 52
code/description queries registered, time 0.079 ms
- 2011-05-10 21:05:08,022 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] INFO (support.context.ContextFactory) Re
Edited by: sivaram on May 10, 2011 9:24 PM

Got it .problem is environment path settings.

Similar Messages

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

Win64_11gR2 on windows 2008 r2 64 bit

Hi,
I'm trying to install oracle database onto a vanilla windows 2008 r2 64 bit machine with windows firewall turned off and no AV installed. The version I have downloaded is labelled win64_11gR2_database_1of2 and 2of2. I have copied the contents of 2of2 into 1of2. As soon as I couble-click (or right click run as administrator) the setup, a cmd window flashes for a split second. I managed to get a screen shot which showed it was trying to launch Oracle Universal Installer from a temp directory in C:\Users\Administrator\AppData\Local\Temp\2\.......
I have installed the latest version of JRE 64 bit. I also tried installing java to a directory without any spaces and have tried launching the setup from command pointing to the new java install folder.
I have tried launching the setup from command using the skip system requirements command but no luck there either.
I have tried running the OUI from within the install directory but it does the same thing.
I must have read through about 50 pages of forums and none of the solutions have worked.
Any help would be much appreciated.

Hi,
Thanks for the suggestions. My server hardware is more than the minimum requirements. It's not a fancy setup, just a standalone physical box with a blank copy of windows and JRE installed. I can't see any other pre-requisite tasks that would apply. If there is any other software I need to install first, I can't see it on that page. In terms of the log file, I could find a install actions in the C:\Users\Administrator\AppData\Local\Temp\2\...... directory which only gave this info.
Using paramFile: C:\Install\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
The number of files bootstrapped for the jre is 0.
The number of files bootstrapped for the oui is 0.
Helios - I can't see if that was supposed to be a link. Could you repost it please?
Thanks

Smart View 11.1.1.3.500 Install on Windows 2008 R2 64 Bit SP1

Wanted to check if any one form user community was able to install Samrtview 11.1.1.3.5 on Windows 2008 R2 64 bit SP1
Think support matrix says its compatible with windows 2008 64 bit but not R2 - Any round about solutions to get his installed on R2 would help.

I have tried in Server 2008 R2, i did not face any issues, again i did not use that extensively

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

Can't install 64-bit DAC on Windows 2008 R2 64-bit

Hi all,
When I attempt to run the 64-bit DAC setup.exe installer (either from the root folder or from win64), I get the following:
Checking swap space: must be greater than 150 MB . Actual 3319 MB Passed
Checking monitor: must be configured to display at least 256 colors Higher than 256 . Actual 65536 Passed
Preparing to launch Oracle Universal Installer from D:\temp\OraInstall2011-08-2_03-11-12PM. Please wait ...
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//COPYRIGHT.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//LICENSE.rtf.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_ja.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//README_zh_CN.html.
checkdir error: cannot create D:/temp/OraInstall2011-08-2_03-11-12PM/jdk/
unable to process jdk//THIRDPARTYLICENSEREADME.txt.
I've tried to download the ZIP file a number of times and I've tried this on a number of Windows 2008 R2 64-bit machines, all with the same result. I'm able to run the 32-bit installer without error.
There's a similar post already on here that suggests using compatibility mode but nothing I've tried has enabled me to install 64-bit DAC on a 64-bit Windows 2008 R2 machine.
Has anyone successfully achieved this?
Thanks!
mroshaw

Doc Id: ID 849658.1
Alert : DAC 10.1.3.4.1 64-bit universal installer fails/hangs on Windows 64-bit and Linux 64-bit
"The issue is 32-bit OUI installer is used for all DAC 10.1.3.4.1 installation which fails during verification/checks on 64-bit machine. It's Installer check which fails, DAC files are fine for 64-bit OS."

Installing Dirsync on Windows 2008 Server Standard FE

Hello all,
I need to Dirsync my only domain controller i have to Office 365. My server is a Windows 2008 Server Standard FE. I installed all requirement for dirsync to be installed (and all Windows updates also) and i still get an error when trying to install
(Says my Powershell is not at least 2.0, but it is...)
Anyone tried to install Dirsync on that kind of server ? (and made it work?)
Regards,

It is
required to update to Windows Management Framework 3.0 or Powershell 3.0 if you are installing DirSync on Windows 2008 R2. I believe the same applies to 2008 SP1 as well.
Also, I've heard of issues where non-English versions don't properly detect the presence of PowerShell. You may want to temporarily change your regional format to English to test this, if this applies to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Installing CF8.0.1 64 on Windows 2008 Serv

Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!

Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

Error Installing AD Password sync connector in windows 2008

HI,
i am trying to install AD Password sync connector in windows 2008 but i am getting following error.
**Error occurred while uploading prepAD.ldif. , please refer to %TEMP%\oimpwdsync.log. Please upload**
**prepAD.ldif to Active Directory Domain Controller before applying ACLs.**
Thanks,

Dont do any thing. just restart your machine,a dn re-configure, because first time passwordsync10.dll has not initialized on AD machine. after that just put same parameter value what you have given previously. it will work
same time verify if AD Authentication or xelsysadm Authentication is wrong

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Windows 2008 server (64 bit) setup not starting?

To all,
Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?

Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
Downloaded
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
and
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
Edited by: user731811 on Oct 14, 2010 1:11 PM

OBIEE 11.1.1.6.0 installation on windows 2008 R2 64 bit failing

I installed OBIEE 11.1.1.6.0 version on windows 2008 R2 64bit;installation has no issues all went well and sample app displayed fine.But, i see scheduler is not starting and also we deployed our code but reports failing with following oracle oci error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: The specified module could not be found. [nQSError: 46029] Failed to load the DLL D:\OBI11G\Oracle_BI1\bifoundation\server\bin\nqsdbgatewayoci10g64.dll. Check if 'Oracle OCI 10G' database client is installed. (HY000)
i also installed and verified by installing 11g client;PATH variable setting etc. no exact solution.i would like to see if any other also facing same issue with OBIEE 11.1.1.6 on windows 2008 R2 64 bit OS.
Thanks

Deva
i didnt get what you mean by rpd client.,if you mean Admin tool, installation is OBIEE 'simple installation' type which includes Admin tool.
coming to connectivity, no from physical layer you cannot view data as the packaged dll file (nqsdbgatewayoci10g64.dll ) is not registering in Windows 2008 64 bit,which i even tried manually.
since above step is failing, i also installed a 11g db client(to divert oci connections) which is working fine for oracle connectivity and updated PATH environment variables but this issue is still in place.. as reports still pointing to Oracle_BI1/bifoundation/server/bin/ dll files
please share your thoughts

Oracle 10g HTTP Web Server on Windows 2008 R2 (64-bit) server.

I downloaded the Oracle 10g HTTP server for Windows 2008 R2 (64-bit) from the link below
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html
10204_vista_w2k8_x64_production_companion.zip (344,455,851 bytes)
Did anyone have luck installing the 10g HTTP server on a Windows 2008 R2 (64-bit) server ?
I could see the installation went fine, but I don't see any "Oracle_HTTP" windows service getting created.

I have not installed on this OS but I'm betting the service is a different name.
Check "log on as" under services to narrow your search

Oracle 10g 64-bit database on Windows 2008 R2 (64-bit) error ?

- I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
- Now everything works fine locally on the database.
- I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
from this PC to the windows 2008 R2. It gives me an error
"Oracle SQL*PLUS has stopped working"
Problem Event Name:     APPCRASH
Application Name:     PLUS80.exe
Application Version:     0.0.0.0
Application Timestamp:     37f946a5
Fault Module Name:     ORA805.dll
Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit )

- I have installed Oracle 64-bit database on Windows 2008 R2 (64-bit) server
- Now everything works fine locally on the database.
- I had installed Oracle forms/reports 6i which has Oracle SQL Plus 8.0.6.
on a windows 7 Professional (32-bit) PC. Now when I connect SQLPUS
from this PC to the windows 2008 R2. It gives me an error
"Oracle SQL*PLUS has stopped working"
Problem Event Name:     APPCRASH
Application Name:     PLUS80.exe
Application Version:     0.0.0.0
Application Timestamp:     37f946a5
Fault Module Name:     ORA805.dll
Any suggestions or how to connect this 8.0.6 SQL to a Oracle 64-bit database (windows 2008 64-bit )

Oracle Forms 6i(32-bit) = Oracle database 10g R2 Windows 2008 R2 64-bit)

We have Oracle database 10g R2 installed on a Microsoft Windows 2008 R2 (64-bit) (SERVER1)
We have Oracle Forms 6i (patch 4a) installed on a Microsoft Windows XP Professional (32-bit) (SERVER2)
I am not able to connect from SERVER2 to SERVER1, either through SQLPLUS or FORMS BUILDER.
Its giving some DLL error.
Is it because forms 6i (32-bit) cannot connect to a 64-bit database on a 64-bit OS ?

There might be problems with 8i clients (like forms 6i) if the database uses AL32UTF8 characterset indeed (if you need unicode and you need to run forms 6i use UTF8 instead) but this should not be related to the platform of the database.
The platform of the database server really should not matter as the forms runtime talks via SQL*Net with the database server and in the end it does not matter if the database runs on linux, windows whatsoever or unix 32 or 64 bit for the client. The only problem you'll encounter is that SQL*Net also changes with versions and thus "older" clients might not be able to communicate with "newer" servers and vice versa.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for 64-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select * from v$nls_parameters where parameter = 'NLS_CHARACTERSET';
PARAMETER                                                       |VALUE
----------------------------------------------------------------|---------------------------
NLS_CHARACTERSET                                                |WE8MSWIN1252
SQL>I just tried a 6i form (6.0.8.25.2) connected to this database. It worked ;) (again: not certified)
cheers

Installing CCB 2.3.1 on Windows 2008 R2 Standards 64 bit Edition Error

Similar Messages

Maybe you are looking for